|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to be used with a 3/4 in Dia supply connector to seal the connection. Size of 13/16 x 1 in.
|
Water heater supply line washer.
|
Everything needed to install flat, screw-in and universal flange elements. Contains one screw-in gasket, one universal flange gasket, one four hole gasket and four 1/4-20 x 3/4 in hex bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The CAMCO flared dip tube is a non-metallic tube that directs incoming cold water to the bottom of the tank and can be cut to length.
|
The CAMCO side mount run-off tube carries water steams safely to the drain pan or drain, if T and P valve activates. Thermoplastic polypropylene run-off tubes present a rigid surface for gripping with standard wrenches and can be cut to length.
|
The 2-1/2 in dielectric nipple is designed for use in water heater inlet and outlet hook-ups and for other uses where dissimilar metals occur in piping and plumbing systems. The thermoplastic lining helps prevent corrosion and the ends are 3/4 in NPT tapered pipe thread for a fluid-tight seal. Dielectric nipple measures 2-1/2 in Length and is sold in a convenient 2-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
|
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
|
CAMCO 11523 3/4 in plastic water heater drain valve features an all plastic valve that fits directly into water heater for easy draining. 3/4 in pipe thread x 3/4 in male hose thread.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAMCO RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included.
|
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. Dimension of 3/4 in FIP x 3/4 in FIP.
|
The CAMCO water heater element quick change tool helps you save time and water when changing your water heater element. Instead of emptying your entire water heater tank just to change the element, simply turn off the water at the water heater to create a vacuum. Securely attach the tool and place a bucket handle in the built-in groove to catch any excess water. Quickly change the element and remove the tool when you're done.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
1-1/4 in shank length. Heavy brass construction. Neoprene seal disc. 3/4 in hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
|
Plastic lined nipples are used for the hot and cold water connections of the water heater. The integral heat traps prevent conductive heat loss between the heated water in the water heater and the connected piping.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
UL listed. Gasket included. 208V 3500W or 240V 4500W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc-plated element wrenches fit all screw-in elements and 1-1/2 in nuts. Works with your screwdriver. Goes into offsets where an adjustable wrench can't.
|
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed.
|
UL listed. Gasket included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
Test your elements and thermostats while still in the water heater. 1 piece.
|
UL listed. Gasket included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Gasket included.
|
UL listed. Gasket included.
|
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. 240 V. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Gasket included.
|
UL listed. Gasket included.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.
|
Richmond Element Wrench, Dual, SAE/Metric: SAE, Head Size: 1-1/2 in, 1-7/8 in, 5 in L
|
Contains (1) 2-1/2 in 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16 in to [no. 18] 5/8 in hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Gasket included.
|
UL listed. Gasket included.
|
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAMCO RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a universal style flange. Gasket and complete instructions are included.
|
UL and CSA listed. Gasket included.
|
UL listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.
|
Richmond Electric Thermostat, Temperature Setting Range: 90 to 150 deg F, Metal/Plastic, 1 in W, 2-1/2 in H, Suitable for: Residential Electric Water Heater
|
Allows the use of a standard screw-in element in a water heater that originally used a flange element.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Gasket included.
|
Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
|
Fits standard 1/2 in socket drive to replace screw-in water heater elements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.
|
Richmond Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Setting Pressure: 150 psi, Dimensions: 7-1/4 in L, Temperature Rating: 210 deg F, Suitable for: Water Heater
|
UL listed. Gasket included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4 in MPT x 3/4 in MPT x 3 in L MIP.
|
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. 240 V. UL listed.
|
BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in nominal female/male sweat outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
Apollo Valves ExpansionPEX Water Heater Connector, Nominal Size: 3/4 in, Barb x FPT Connection, Stainless Steel, 25 mm Dia, 18 in L
|
Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 120 V, Wattage Rating: 1500 W, Copper
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 120 V, Wattage Rating: 2000 W, Copper
|
Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 240 V, Wattage Rating: 4500 W, Copper
|
Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The CAMCO Apcom style lower thermostat features a single pole with a built-in safety switch that prevents overheating. The temperature range is adjustable from 110 to 160 deg F, adjust only the lower thermostat.
|
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed.
|
Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four Torx-head screws and four J-style clip-on nuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use CAMCO dielectric unions wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters pressure rated to 350 psi, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps and steam lines.
|
UL listed. Gasket included.
|
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 240 V, Wattage Rating: 4500 W, Copper
|
This design is commonly used as the upper thermostat in residential electric water heaters with "simultaneous" design, which means both elements are on at the same time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP Connection, Stainless Steel, 12 in L, Suitable for: Water Heaters
|
This design is the most popular upper thermostat in residential electric water heaters. These heaters often have a "non-simultaneous" design, which means only one element is on at any given time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
|
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
|
|
Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Electric Thermostat, 120 V, Temperature Setting Range: 90 to 150 deg F, Metal/Plastic, 1 in W, 4-1/4 in H, Suitable for: Residential Electric Water Heater
|
Extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion.
|
CAMCO's single element Therm-O-Disc style thermostat with HLC replaces the heating element in RV water heaters. It has an energy efficient range setting and built-in safety switch to prevent overheating. It also comes complete with detailed instructions and wiring diagrams for easy installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
|
Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP x MIP Connection, Stainless Steel, 12 in L, Suitable for: Water Heaters
|
Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes 24 in thermocouple, burner door gasket, Tinnerman?? clips, screws, Torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Seamless corrugated 18 in flexible copper water connectors. 125 psi maximum.
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
LASCO Braided Water Heater Connector, Nominal Size: 3/4 in, FPT Connection, 200 psi, Temperature Rating: 180 deg F, Stainless Steel, 18 in L, Suitable for: Water Heaters
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 240 V, Wattage Rating: 4500 W, Stainless Steel
|
CAMCO's 3/4 in temperature and pressure valve with 4 in probe will help protect your RV or home water heater from excessive temperature and water pressure. It's factory set at 150 psi and 210 deg F. It features epoxy-coated probe to prevent corrosion buildup.
|
CAMCO's 4500 W/240 V screw-in foldback type ultra-low watt density water heater elements are better suited for areas with problem water. The ultra LWD of this element helps prevent lime deposits and the high-performance nickel-chromium stainless steel alloy sheath gives it additional strength to resist dry firing. The combined effect make the element better suited for use in areas with problem or intermittent water supply.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
CAMCO's 2500 W/240 V screw-in foldback type ultra-low watt density water heater elements are better suited for areas with problem water. Ultra LWD and special metal surface (high-performance nickel-chromium stainless steel alloy) reduce chances of lime build-up. They resist dry firing and are ideal for problem water areas and locations with intermittent water supply.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
|
Richmond Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Setting Pressure: 150 psi, Dimensions: 7-1/4 in L, Temperature Rating: 210 deg F, Suitable for: Water Heater
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.
|
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar).
|
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAMCO's 4500 W/240 V universal flange foldback lime life ultra-low watt density water heater elements are better suited for areas with problem water. Ultra LWD and special metal surface (high-performance nickel-chromium stainless steel alloy) reduce chances of lime build-up.
|
Setting: of 150 psi/210 deg F, stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe.
|
Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP Connection, Stainless Steel, 24 in L, Suitable for: Water Heaters
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP x MIP Connection, Stainless Steel, 18 in L, Suitable for: Water Heaters
|
Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 240 V, Wattage Rating: 5500 W, Stainless Steel
|
3 in x 48 in x 75 in vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gal tank, plastic tape. For gas, oil or electric water heaters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar).
|
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature Relief of 210 deg F (99 deg C), Pressure Relief Range of 75 to 150psi (5.2 to 10.3 bar).
|
The CAMCO aluminum water heater drain pan has a 32 in I.D and fits underneath gas or electric water heaters to help collect and drain off leaking water. The aluminum pan will not rust or crack and it has a pre-cut hole for the included PVC fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAMCO's 4500 W 240 V screw-in type low watt density water heater elements are better suited for areas with problem water. Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. This screw-in element has 1-3/8 in thread and is made for state Industries manufactured Duron tank water heaters. Also used in sears Duron tank water heaters. Each element includes two gaskets. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
|
Used on gas, oil or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm and brass 3/4 in (20 mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum pressure 150psi (10 bar).
|
The CAMCO T and P relief valve safely relieves excess temperature and pressure in your water heater. The CAMCO T and P valve is safe for use up to 150 psi and/or to 210 deg F. It has a 3/4 in inlet or outlet and a 3-5/16 in long shank. Durable all copper alloy body.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP x MIP Connection, Stainless Steel, 24 in L, Suitable for: Water Heaters
|
Richmond FV Sensor Kit, Suitable for: Rheem, Ruud and Richmond FVIR Water Heater
|
The Copper Connector Kit is designed for use with gas or electric systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in x 15 in flexible water connectors, one roll of Teflon tape, two 3/4 in NPT compression adapters and one 1/2 in x 24 in stainless steel gas connector. Tools for installation not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), pressure relief range is 75 to 150psi (5.2 to 10.3 bar).
|
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar).
|
The tankless drain pan is designed to fit underneath most whole house tankless water heaters providing both water damage protection and flushing maintenance convenience. The pans are injection molded to give them great strength and durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electric water heater tune-up kits provide a quick and easy way to replace the most common items on the most popular water heaters.
|
CAMCO's 4500 W/240 V screw-in ripple type ultra-low watt density water heater elements are better suited for areas with problem water. The ultra LWD of this element helps prevent lime deposits d the high-performance nickel-chromium stainless steel alloy sheath gives it additional strength to resist dry firing. The combined effect make the element better suited for use in areas with problem or intermittent water supply.
|
Contains 2 high watt density elements #02342 4500 W 240 V, 1 TOD lower thermostat #08122 and 1 TOD upper thermostat #08162.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contains 2 high watt density elements #02342 4500w 240 V, 1 Apcom style lower thermostat w/protector #07722, 1 Apcom style upper thermostat w/protector #07862.
|
Used on gas, oil or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm and brass 3/4 in (20 mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum pressure 150psi (10 bar).
|
This wall-mount, aluminum tankless drain pan is designed to fit underneath most whole house tankless water heaters providing both water damage protection and flushing maintenance convenience. These aluminum pans will not rust, corrode or crack and may be used for gas or electric water heaters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Electric Water Heater Installation Kit, Specifications: 3/4 x 15 in Connectors
|
Places gas water heaters 18 in above floor as required by the National Fuel Gas and Plumbing Codes. Galvanized sheet metal of 18 ga thick holds up to 50 gal water heaters. Many local building codes require a water heater stand for gas water heaters located in areas where the accumulation of combustible fumes may occur.
|
The Copper Connector Kit is designed for use with gas systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in x 15 in flexible water connectors, one roll of Teflon tape, two 3/4 in NPT compression adapters and one 1/2 in x 24 in stainless steel gas connector. Tools for installation not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Gas Water Heater Installation Kit, Specifications: 3/4 x 15 in Connectors
|
Intermatic Water Heater Timer, Steel, 5 in Width, 7-3/4 in Height
|
Series 374A boiler pressure relief valves are used in hot water boiler applications to protect against excessive pressure on all types of hot water heating boiler equipment. They have an iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring and test lever. Series 374A resists corrosive water conditions, sticking and freezing and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control. Standard pressure setting 30 psi. Pressure range rated up to 550,000 Btu/hr at a 30 psi setting only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Gas Control Thermostat, 13 in W, 6.8 in H, Suitable for: Water Heater
|
This 1/2 in high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body with union solder inlet and NPT threaded outlet connections, a tight seating check valve, purge lever for manual purging and a stainless steel strainer. It has high capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi.
|
Rheem Pipe Cover Kit, Gray, Dimensions: 16-1/2 in L, Suitable for: RTGH-95DV, RTGH-95X, RTGH-84DV and RTGH-84X Condensing Tankless Water Heater
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Supply and service valve kit for use with a tankless gas water heater installation. Clean brass meets the strictest Low lead code requirements. Provides an easy way to flush and service your new tankless water heater. Hot and cold installation and service valves. Includes relief valve and unions. Clean brass for low lead codes. Makes it easy for future service and flushing of tankless water heaters.
|
4 in water column, 1-1/4 in shank length, 1/2 in NPT gas inlet by 1/2 in inverted flare outlet, adjustable 70 to 160 deg.
|
The MiniTank family is a unique product that delivers hot water directly at the point of use in both commercial and residential application environments. Simply tap into the water line and plug the 120 V cord into a standard electrical outlet or hardwire for a stand alone hot water source that operates directly at the point-of-use. The heaters can be easily installed or serviced.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The MiniTank family is a unique product that delivers hot water directly at the point of use in both commercial and residential application environments. Simply tap into the water line and plug the 120 V cord into a standard electrical outlet or hardwire for a stand alone hot water source that operates directly at the point-of-use. The heaters can be easily installed or serviced.
|
Adjustable 70 to 160 deg F. 42,000 BTU. 4 in water column. 1-1/4 in shank length. 1/2 in NPT gas inlet by 1/2 in inverted flare outlet.
|
The Richmond? Essential? RMTEX-06 is a 6.5 kW tankless electric water heater ideal for point-of-use applications. This unit is ideal for a sink and hard wired to utilize 240 V. Richmond? Essential? tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money, and require no venting. The sleek, compact size, 90% smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The MiniTank family is a unique product that delivers hot water directly at the point of use in both commercial and residential application environments. Simply tap into the water line and plug the 120 V cord into a standard electrical outlet or hardwire for a stand alone hot water source that operates directly at the point-of-use. The heaters can be easily installed or serviced.
|
Richmond Gas Control Thermostat, 12.8 in W, 7-1/2 in H, Suitable for: Water Heater
|
The Richmond? Essential? RMTEX-04 is a 3.5 kW tankless electric water heater ideal for low flow point-of-use applications. Typically this unit is installed at the point-of-use and hard wired to 120 V requiring a 30 A breaker. Richmond? Essential? tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money, and require no venting. The sleek, compact size, 90% smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Essential? RMTEX-08 is a 8 kW tankless electric water heater ideal for point-of-use applications. This unit is great for a point-of-use application. Richmond? Essential? tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money, and require no venting. The sleek, compact size, 90% smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature.
|
The Richmond? Essential? 2.5-gal Electric point-of-use Water Heater comes with a 2 years In Home Labor Warranty and has a compact design that can provide an adequate supply of hot water for a single application. The heater includes a 1440 W element and a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation.
|
The Richmond? Essential? RMTEX-11 is an 11 kW tankless electric water heater ideal for point-of-use applications. This unit is great for a point-of-use application. Richmond? Essential? tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money, and require no venting. The sleek, compact size, 90% smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rheem Recess Box Kit, Gray, Dimensions: 9-1/2 in L x 16-1/2 in W x 46 in H, Suitable for: RTGH-95X, RTGH-84X Condensing Heater
|
The Richmond? Essential? 6-gal Electric point-of-use Water Heater comes with a 2 years In Home Labor Warranty and has a compact design that can provide an adequate supply of hot water for a single application. The heater includes a 2,000-Watt element and a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation.
|
The Richmond? Essentail RMTEX-18 is an 18 kW tankless electric water heater ideal for mid-range whole home applications. This unit is ideal for single shower applications in the midwest. Richmond? Essential? tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money, and require no venting. The sleek, compact size, 90% smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature. Richmond? 's self modulating technology can save Up to 50% on your water heating bill.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Essential? 10-gal Electric point-of-use Water Heater comes with a 2 years In Home Labor Warranty and has a compact design that can provide an adequate supply of hot water for a single application. The heater includes a 2000 W element and a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation.
|
The Richmond? Essential? 30-gal Electric Water Heater comes with a 2 years In Home Labor Warranty and provides ample hot water for households with 2 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater features an electronic thermostat that automatically keeps water at your desired temperature. This unit meets or exceeds NAECA and UL requirements.
|
The Richmond? Essential? 30-gal Electric Water Heater comes with a 2 years In Home Labor Warranty and provides ample hot water for households with 2 people. Its medium profile allows this water heater to fit into spaces a taller model won't while increasing ease of installation. The heater features an electronic thermostat that automatically keeps water at your desired temperature.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Essential electric water heaters are engineered for longer life resistored heating elements and premium-grade anode rod.
|
The Richmond? Essential? 40-gal Electric Water Heater comes with a 2 years In Home Labor Warranty and provides ample hot water for households with 2-3 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater features an electronic thermostat that automatically keeps water at your desired temperature. This unit meets or exceeds NAECA and UL requirements.
|
The Richmond? Essential? 20-gal Electric point-of-use Water Heater comes with a 2 years In Home Labor Warranty and has a compact design that can provide an adequate supply of hot water for a single application. The heater includes a 2000 W element and a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Essential Gas Water Heater, Inlet Connection Size: 3/4 in, Outlet Connection Size: 3/4 in, BTU Rating: 36000 Btu/hr, Gas Type: Natural Gas, 52 gph, Tank Capacity: 40 gal, Energy Efficiency: 0.58, Recovery Rate: 36.4 gph, Vent Type: Atmospheric, Vent Size: 3, 4 in, Water Connection Location: Top, Gas Connection Height: 14-1/4 in, Tank Height: 58-1/2 in, Emissions: Ultra-Low NOx, Dark Warm Gray, Dimensions: 19 in W x 58-1/2 in H, Includes: Temperature and Pressure Relief Valve
|
Richmond Essential Electric Water Heater, 240 V, Wattage Rating: 4500 W, Number of Phases: 1, Tank Capacity: 50 gal, Energy Efficiency: 0.93, Recovery Rate: 21 gph, Water Connection Size: 3/4 in, Water Connection Type: MIP, Heating Element: Copper, Dimensions: 20-3/8 in Dia x 58-5/8 in H, Includes: Temperature and Pressure Relief Valve
|
The Richmond? Essential? 50-gal Electric Water Heater comes with a 2 years In Home Labor Warranty and provides ample hot water for households with 3-4 people. Its medium profile allows this water heater to fit into spaces a taller model won't while increasing ease of installation. The heater features an electronic thermostat that automatically keeps water at your desired temperature.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Essential? 28-gal Electric Water Heater comes with a 2 years In Home Labor Warranty and provides ample hot water for households with 2 people. Its short profile allows this water heater to fit into spaces a taller model won't while increasing ease of installation. The heater features an electronic thermostat that automatically keeps water at your desired temperature. This unit meets or exceeds NAECA and UL requirements.
|
The Richmond? Essential Plus? 40-gal Natural Gas Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 34000 Btu burner featuring reduced emissions Low-NOx technology. This heater provides ample hot water for households with 2-3 people. Its short profile allows this water heater to fit into spaces a taller model won't while increasing ease of installation. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace.
|
The Richmond? Essential? 36-gal Electric Water Heater comes with a 2 years In Home Labor Warranty and provides ample hot water for households with 2-3 people. Its short profile allows this water heater to fit into spaces a taller model won't while increasing ease of installation. The heater features an electronic thermostat that automatically keeps water at your desired temperature. This unit meets or exceeds NAECA and UL requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Essential Plus? 29-gal Natural Gas Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 32000 Btu burner featuring reduced emissions Low-NOx technology. This heater provides ample hot water for households with 2 people. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. The heater has a 6 years tank warranty and meets or exceeds NAECA and ASHRAE requirements.
|
Essential tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications.
|
The Richmond? Essential Plus? 40-gal Short Propane Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 31000 Btu burner. This heater provides ample hot water for households with 2-3 people. Its short profile allows this water heater to fit into spaces a taller model won't while increasing ease of installation. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. The heater has a 6 years tank warranty and meets or exceeds NAECA and ASHRAE requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Essential Plus? 40-gal Propane Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 32000 Btu burner. This heater provides ample hot water for households with 2-3 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. The heater has a 6 years tank warranty and meets or exceeds NAECA and ASHRAE requirements.
|
Richmond Essential Electric Water Heater, 240 V, Wattage Rating: 4500 W, Number of Phases: 1, Tank Capacity: 30 gal, Energy Efficiency: 0.92, Recovery Rate: 16 gph, Water Connection Size: 3/4 in, Water Connection Type: NPT, Dimensions: 19-1/4 in Dia x 47-3/4 in H, Includes: Temperature and Pressure Relief Valve
|
Richmond Water Heater, Outlet Connection Size: 3/4 in, Tank Capacity: 40 gal, Energy Efficiency: 0.92, Water Connection Location: Top, Tank Height: 31-1/2 in, Dimensions: 23 in Dia, Includes: Factory Installed T and P Relief Valve
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Essential? 15-gal Electric point-of-use Water Heater comes with a 2 years In Home Labor Warranty and has a compact design that can provide an adequate supply of hot water for a single application. The heater includes a 2000 W element and a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation.
|
The Richmond? Essential Plus? 29-gal Propane Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 30000 Btu burner. This heater provides ample hot water for households with 2 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. The heater has a 6 years tank warranty and meets or exceeds NAECA and ASHRAE requirements.
|
The Richmond? Essential? 40-gal Electric Water Heater comes with a 2 years In Home Labor Warranty and has a tall tank design that's ideal for your mobile home. The heater features unique side mounted water connections for easier installation, and the dual 4500 W heating elements provide fast recovery. Made to meet or exceed NAECA requirements, this efficient heater has an automatic thermostat that makes it easy for you to precisely control the temperature of the water.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Essential Plus? 30-gal Short Natural Gas Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 30000 Btu burner featuring reduced emissions Low-NOx technology. This heater provides ample hot water for households with 2 people. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. The heater has a 6 years tank warranty and meets or exceeds NAECA and ASHRAE requirements.
|
The Richmond? Essential Plus? 50-gal Natural Gas Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 38,000 Btu burner featuring reduced emissions Low-NOx technology. This heater provides ample hot water for households with 3-4 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace.
|
This Richmond? Essential Plus? 29-gal 32,000 Btu Dual-Fuel Mobile Home Water Heater comes with a 2 years In Home Labor Warranty and features a low-input pilot to help conserve energy. The water heater has a 30-gal capacity that is suitable for use in manufactured housing and a convertible control that enables the water heater to be used with either natural or liquid propane gas. The water heater is easy to install thanks to the side-mounted temperature and pressure relief valve and cold-water inlet. This water heater includes a Piezo ignition system for no-match lighting. Meets or exceed NAECA and ASHRAE requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enjoy on demand and continuous hot water for your whole home, multiple applications with this Richmond essential tankless electric water heater.
|
This Richmond? Essential Plus? 40-gal 34,000 Btu Dual-Fuel Mobile Home Water Heater comes with a 2 years In Home Labor Warranty and features a low input pilot to helpconserve energy. The Water Heater has a 40-gal capacity that is suitable for use in manufactured housing and a convertible control that enables the water heater to be used with either natural or liquid propane gas. The water heater is easy to install thanks to the side-mounted temperature and pressure-relief valve and cold water inlet. This water heater includes a Piezo ignition system for no match lighting. Meets or exceed NAECA and ASHRAE requirements.
|
The Richmond? Essential? Plus; 40-gal Electric Water Heater has a medium profile to fit into spaces a taller model won't while increasing ease of installation. The heater features the System Sentinel diagnostic LED control, which verifies heating element operation and pinpoints location of functioning or non-functioning heating elements. This unit meets or exceeds NAECA and UL requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Essential? Plus; 50-gal Electric Water Heater has a medium profile to fit into spaces a taller model won't while increasing ease of installation. The heater features the System Sentinel diagnostic LED control, which verifies heating element operation and pinpoints location of functioning or non-functioning heating elements. This unit meets or exceeds NAECA and UL requirements.
|
The Richmond? Essential? 30-gal Electric point-of-use Water Heater comes with a 2 years In Home Labor Warranty and has a compact design that can provide an adequate supply of hot water for a single application. The heater includes a 2000 W element and a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation.
|
The Richmond? Essential Plus? 50-gal Propane Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 36000 Btu burner. This heater provides ample hot water for households with 3-4 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. The heater has a 6 years tank warranty and meets or exceeds NAECA and ASHRAE requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Water Heater, Inlet Connection Size: 1/2 in, Outlet Connection Size: 3/4 in, BTU Rating: 38000 Btu, Gas Type: Natural Gas, Tank Capacity: 40 gal, Energy Efficiency: 0.58, Recovery Rate: 35 gph, Vent Type: Atmospheric, Vent Size: 3, 4 in, Water Connection Location: Top, Gas Connection Height: 14-1/4 in, Tank Height: 58-1/2 in, Emissions: Ultra-Low NOx, Dark Warm Gray, Dimensions: 61-1/2 x 58-1/2 in, Includes: Factory Installed T and P Relief Valve
|
The Richmond? Essential? 50 gal electric point-of-use water heater comes with a 2 years In Home Labor Warranty and has a compact design that can provide an adequate supply of hot water for a single application. The heater includes (2) 2000 W elements and a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation.
|
The Richmond? Essential? 40-gal Electric Table Top Water Heater comes with a 2 years In Home Labor Warranty and provides ample hot water for households with 2-3 people. Its compact design allows this water heater to fit snugly against a wall, and its porcelain enamel top provides added work area. The heater features an electronic thermostat that automatically keeps water at your desired temperature. This unit meets or exceeds NAECA and UL requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Essential Plus? 50-gal Natural Gas Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 38000 Btu burner featuring reduced emissions Low-NOx technology. This heater provides ample hot water for households with 3-4 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace.
|
Encore? Smart electric water heaters with LeakGuard is engineered for longer life with built-in leak detection and auto water shutoff.
|
Encore? Smart electric water heaters with LeakGuard is engineered for longer life with built-in leak detection and auto water shutoff.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Encore? XR90 29-gal Natural Gas Water Heater comes with a 2 years In Home Labor Warranty and has a powerful 60000 Btu burner featuring reduced emissions Low-NOx technology. This High Btu burner allows the XR90 to provide more hot water than a standard 50-gal model, and the reduced 29-gal tank size makes it 17% more efficient than a standard 50-gal. This heater provides ample hot water for households with 4 people. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. The heater has a 12 years tank warranty and meets or exceeds NAECA and ASHRAE requirements.
|
The Richmond? 30-gal 30000 Btu Natural Gas/Liquid Propane Water Heater comes with a 2 years In Home Labor Warranty and has a direct vent design that offers installation versatility. Its 30-gal tank provides ample hot water for your mobile home. UL approved for manufactured housing, the heater has a low input pilot that conserves energy and a factory installed temperature-and-pressure relief valve. Hot/cold water connections are side mounted on the heater for fast, easy installation. Meets or exceeds NAECA and ASHRAE requirements.
|
Encore? smart electric water heaters with LeakGuard is engineered for longer life with built-in leak detection and auto water shutoff.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? 40-gal 30000 Btu Natural Gas/Liquid Propane Water Heater comes with a 2 years In Home Labor Warranty and has a direct vent design that offers installation versatility. Its 40-gal tank provides ample hot water for your mobile home. UL approved for manufactured housing, the heater has a low-input pilot that conserves energy and a factory installed temperature-and-pressure relief valve. Hot/cold water connections are side mounted on the heater for fast, easy installation. Meets or exceeds NAECA and ASHRAE requirements.
|
The Richmond? Essential Plus? 40-gal Tall Power Vent 6 years Natural Gas Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 40000 Btu burner featuring reduced emissions Low-NOx technology. This heater provides ample hot water for households with 3-4 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace.
|
The Richmond? Encore? 75-gal Natural Gas Water Heater comes with a 2 years In Home Labor Warranty and has a powerful 75100 Btu burner featuring reduced emissions Low-NOx technology. This heater provides ample hot water for households with 5+ people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. The heater has a 6 years tank warranty and meets or exceeds NAECA and ASHRAE requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Essential Gas Water Heater, Inlet Connection Size: 3/4 in, Outlet Connection Size: 3/4 in, BTU Rating: 42000 Btu/hr, Gas Type: Natural Gas, 78 gph, Tank Capacity: 50 gal, Energy Efficiency: 0.68, Recovery Rate: 42.4 gph, Vent Type: Power Vent, Vent Size: 2, 3 in, Water Connection Location: Top, Gas Connection Height: 14 in, Tank Height: 58 in, Emissions: Ultra-Low NOx, Dark Warm Gray, Dimensions: 21-3/4 in W x 58 in H, Includes: Temperature and Pressure Relief Valve
|
The Richmond? Essential Plus? 40-gal Tall Power Vent 6 years Liquid Propane Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 36000 Btu burner. This heater provides ample hot water for households with 2-3 people. The power vent design creates an induced draft that is optimal for installations without sufficient space around the heater. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace.
|
The Richmond? Essential Plus? 50-gal Tall Power Vent 6 years Liquid Propane Water Heater comes with a 2 years In Home Labor Warranty and has an energy efficient 42,000 Btu burner. This heater provides ample hot water for households with 3-4 people. The power vent design creates an induced draft that is optimal for installations without sufficient space around the heater. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Encore?, 38 gal 40000 Btu natural gas water heater comes with a 2 years In Home Labor Warranty and provides ample hot water for households with 2 to 3 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater features a powered damper that closes when the unit is not in operation to reduce stand by heat loss and increase efficiency. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. This unit meets the requirements to qualify for ENERGY STAR. Meets or exceeds NAECA and ASHRAE requirements.
|
Richmond Essential Water Heater, Inlet Connection Size: 1/2 in, BTU Rating: 36000 Btu, Gas Type: Natural Gas, 64 gph, Tank Capacity: 40 gal, Energy Efficiency: 0.65, Vent Type: Power, Vent Size: 62-1/2 in, Water Connection Location: Top, Tank Height: 51 in, Dimensions: 21-3/4 in Dia x 51-1/4 in H, Includes: Factory Installed T and P Relief Valve
|
Richmond Essential Water Heater, Inlet Connection Size: 1/2 in, BTU Rating: 32000 Btu, Gas Type: Propane, 64 gph, Tank Capacity: 40 gal, Energy Efficiency: 0.61, Vent Type: Power, Vent Size: 62-1/2 in, Water Connection Location: Top, Tank Height: 51 in, Dimensions: 21-3/4 in Dia x 51-1/4 in H, Includes: Factory Installed T and P Relief Valve
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Marathon 50-Gallon Lifetime** Electric Water Heater features a seamless, blow-molded plastic tank which is impervious to rust and corrosion. Multiple layers of filament wound fiberglass give the tank unmatched strength and increased insulation to reduce energy consumption. Self cleaning action of bowl-shaped tank bottom and inlet tube helps fight sediment buildup. Lifetime limited warranty on tank and 6 year limited warranty on parts. Meets or exceed NAECA and UL requirements.
|
Richmond Hybrid Electric Water Heater, 40 gal Tank, 240 V, 30/15 A, 4.5 kW Wattage, 1 ph, 4200 Btu/hr BTU, First Hour Delivery: 60 gal, 3/4 in Water Connection, 3.75, 434 % Efficiency
|
Richmond Essential Water Heater, Inlet Connection Size: 1/2 in, BTU Rating: 36000 Btu, Gas Type: Natural Gas, Tank Capacity: 50 gal, Energy Efficiency: 0.7, Recovery Rate: 36.4 gal/hr, Vent Type: Power, Vent Size: 62-1/2 in, Water Connection Location: Top, Tank Height: 51 in, Dimensions: 23-3/4 in Dia x 51-1/4 in H, Includes: Factory Installed T and P Relief Valve
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Richmond? Encore?, 50 gal Tall 40000 Btu natural gas water heater comes with a 2 years In Home Labor Warranty and provides ample hot water for households with 3 to 4 people. Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor. The heater features a powered damper that closes when the unit is not in operation to reduce stand by heat loss and increase efficiency. The heater also features an FVIR System, an exclusive air/fuel shutoff device that prevents ignition of flammable vapors should they be detected outside the unit. The air intake is designed to be completely maintenance free with no filters to clean or replace. This model meets the requirements to qualify for ENERGY STAR.
|
Richmond Essential Water Heater, Inlet Connection Size: 1/2 in, BTU Rating: 32000 Btu, Gas Type: Propane, Tank Capacity: 50 gal, Energy Efficiency: 0.7, Recovery Rate: 32.4 gal/hr, Vent Type: Power, Vent Size: 62-1/2 in, Water Connection Location: Top, Tank Height: 51 in, Dimensions: 21-3/4 in Dia x 51-1/4 in H, Includes: Factory Installed T and P Relief Valve
|
Richmond Gas Water Heater, Inlet Connection Size: 3/4 in, Outlet Connection Size: 1/2 in, BTU Rating: 38000 Btu/hr, Gas Type: Natural Gas, 1.11 gpm, Tank Capacity: 40 gal, Energy Efficiency: 0.64, Heating Chamber Material: Stainless Steel, Recovery Rate: 38 gph at 90 deg F, Vent Type: Powered Damper, Vent Size: 3, 4 in, Water Connection Location: Top, Gas Connection Height: 14 in, Tank Height: 60-1/4 in, Emissions: Ultra-Low NOx, Dark Warm Gray, Dimensions: 19-3/4 in Dia, Includes: 19 ft Cord, 3-Prong Plug, Temperature and Pressure Relief Valve
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Richmond Gas Water Heater, Inlet Connection Size: 3/4 in, Outlet Connection Size: 1/2 in, BTU Rating: 38000 Btu/hr, Gas Type: Natural Gas, 1.5 gpm, Tank Capacity: 50 gal, Energy Efficiency: 0.68, Heating Chamber Material: Stainless Steel, Recovery Rate: 38 gph at 90 deg F, Vent Type: Powered Damper, Vent Size: 3, 4 in, Water Connection Location: Top, Gas Connection Height: 14 in, Tank Height: 59-1/4 in, Emissions: Ultra-Low NOx, Dark Warm Gray, Dimensions: 21-3/4 in Dia, Includes: 19 ft Cord, 3-Prong Plug, Temperature and Pressure Relief Valve
|
Richmond Encore Hybrid Electric Water Heater, Tank Capacity: 80 gal, 240 V, 30/15 A, Wattage Rating: 4.5 kW, Number of Phases: 1, BTU Rating: 4200 Btu/hr, First Hour Delivery: 87 gal, Water Connection Size: 3/4 in, Energy Factor: 4, Efficiency: 447 %, Dimensions: 24-1/4 in Dia x 74-3/16 in H
|
|
|
