Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATERS > WATER HEATER REPAIR PARTS
Sort By:
1
WASHER WATER HEATER SUPPLY    Danco 88493 Water Heater Washer Camco 07133 Element Gasket Kit
Designed to be used with a 3/4 in Dia supply connector to seal the connection. Size of 13/16 x 1 in. Water heater supply line washer. Everything needed to install flat, screw-in and universal flange elements. Contains one screw-in gasket, one universal flange gasket, one four hole gasket and four 1/4-20 x 3/4 in hex bolts.
Camco Mfg 11061 Dip Tube Camco 10623 Dielectric Nipple WaterFlex 0437012 Corrugated Flexible Water Heater Connector
The CAMCO flared dip tube is a non-metallic tube that directs incoming cold water to the bottom of the tank and can be cut to length. The 2-1/2 in dielectric nipple is designed for use in water heater inlet and outlet hook-ups and for other uses where dissimilar metals occur in piping and plumbing systems. The thermoplastic lining helps prevent corrosion and the ends are 3/4 in NPT tapered pipe thread for a fluid-tight seal. Dielectric nipple measures 2-1/2 in Length and is sold in a convenient 2-pack. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
WaterFlex 0437018 Corrugated Flexible Water Heater Connector Camco 11523 Drain Valves Camco 2143 High Watt Density Water Heater Element
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP. CAMCO 11523 3/4 in plastic water heater drain valve features an all plastic valve that fits directly into water heater for easy draining. 3/4 in pipe thread x 3/4 in male hose thread. CAMCO RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included.
WaterFlex 0437024 Corrugated Flexible Water Heater Connector B and K 168-003NL Dielectric Unions B and K 102-816 Water Heater Drain Valves
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. Dimension of 3/4 in FIP x 3/4 in FIP. Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. 1-1/4 in shank length. Heavy brass construction. Neoprene seal disc. 3/4 in hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
KIT HEAT TRAP FLAPPER         CopperFlex WB00-12N Water Heater Connector Camco 2343 High Watt Density Water Heater Element
Plastic lined nipples are used for the hot and cold water connections of the water heater. The integral heat traps prevent conductive heat loss between the heated water in the water heater and the connected piping. BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks. UL listed. Gasket included. 208V 3500W or 240V 4500W
Camco 4383 High Watt Density Water Heater Element Camco 2223 High Watt Density Water Heater Element B and K 167-004NL Dielectric Unions
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed. UL listed. Gasket included. Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
B K Industries 168-004NL Dielectric Unions Camco 2293 High Watt Density Water Heater Element Camco 2203 High Watt Density Water Heater Element
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. UL listed. Gasket included. UL listed. Gasket included.
Camco 2263 High Watt Density Water Heater Element Camco 4483 High Watt Density Water Heater Element Camco 2243 High Watt Density Water Heater Element
UL listed. Gasket included. High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. 240 V. UL listed. UL listed. Gasket included.
Camco 2163 High Watt Density Water Heater Element CopperFlex WB00-15N Water Heater Connector Camco 07223 Adapter Kit
UL listed. Gasket included. BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks. Contains (1) 2-1/2 in 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16 in to [no. 18] 5/8 in hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit.
Camco 2283 High Watt Density Water Heater Element Camco 4523 High Watt Density Water Heater Element Camco 4503 High Watt Density Water Heater Element
UL listed. Gasket included. UL listed. Gasket included. High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed.
Camco 4363 High Watt Density Water Heater Element Camco 2583 Low Watt Density Water Heater Element Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat
CAMCO RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a universal style flange. Gasket and complete instructions are included. UL and CSA listed. Gasket included. UL listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
CopperFlex WB00-18N Water Heater Connector THERMOSTAT LOWER ELECTRIC 240V KIT ADAPT-O-FLANGE UNIVERSAL
BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks. Richmond Electric Thermostat, Temperature Setting Range: 90 to 150 deg F, Metal/Plastic, 1 in W, 2-1/2 in H, Suitable for: Residential Electric Water Heater Allows the use of a standard screw-in element in a water heater that originally used a flange element.
Camco 2363 High Watt Density Water Heater Element WaterFlex 0437118 Corrugated Flexible Water Heater Connector CopperFlex WB00-24N Water Heater Connector
UL listed. Gasket included. Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP. BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.
VALVE T-R 3-1/4IN STD SHANK   Camco 4703 Low Watt Density Water Heater Element Camco 01023 Flapper Style Dielectric Heat Trap
Richmond Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Setting Pressure: 150 psi, Dimensions: 7-1/4 in L, Temperature Rating: 210 deg F, Suitable for: Water Heater UL listed. Gasket included. Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4 in MPT x 3/4 in MPT x 3 in L MIP.
Camco 4803 High Watt Density Water Heater Element CopperFlex WB034-24N Corrugated Water Heater Connector B and K Industries 168-005NL Dielectric Unions
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. 240 V. UL listed. BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in nominal female/male sweat outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks. Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
CONNECTOR SS 3/4F1960X3/4X18IN ELEMENT HEATER CU HWD 1500W   ELEMENT HEATER CU HWD 2000W
Apollo Valves ExpansionPEX Water Heater Connector, Nominal Size: 3/4 in, Barb x FPT Connection, Stainless Steel, 25 mm Dia, 18 in L Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 120 V, Wattage Rating: 1500 W, Copper Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 120 V, Wattage Rating: 2000 W, Copper
ELEMENT HEATER CU HWD 4500W   WaterFlex 0437124 Corrugated Flexible Water Heater Connector Camco 7723 Dual Element Lower Water Heater Thermostat
Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 240 V, Wattage Rating: 4500 W, Copper Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP. The CAMCO Apcom style lower thermostat features a single pole with a built-in safety switch that prevents overheating. The temperature range is adjustable from 110 to 160 deg F, adjust only the lower thermostat.
Camco 4603 High Watt Density Water Heater Element Camco 09423 Replacement Gasket Kit Camco 23503 Dielectric Union
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed. Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four Torx-head screws and four J-style clip-on nuts. Use CAMCO dielectric unions wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters pressure rated to 350 psi, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps and steam lines.
Camco 3943 High Watt Density Water Heater Element Fluidmaster B1H12 Water Heater Connector ELEMENT HEATER CU MWD 4500W
UL listed. Gasket included. Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 240 V, Wattage Rating: 4500 W, Copper
THERMOSTAT UPR SNGL ELEM 240V Plumb Pak PP888-1LF Water Heater Connector THERMOSTAT UPPER ELECTRIC 240V
This design is commonly used as the upper thermostat in residential electric water heaters with "simultaneous" design, which means both elements are on at the same time. Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP Connection, Stainless Steel, 12 in L, Suitable for: Water Heaters This design is the most popular upper thermostat in residential electric water heaters. These heaters often have a "non-simultaneous" design, which means only one element is on at any given time.
Cash Acme 22441LF Sharkbite Fluidmaster B1H18 Water Heater Connector Fluidmaster B4H18 Water Heater Connector
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Fluidmaster B3H18 Water Heater Connector Cash Acme 22604LF Sharkbite Water Heater Installation Kit Rheem / Richmond RP20063 Water Heater Gasket Kit
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
THERMOSTAT UPR SNGL ELEM 120V Camco 11572 Anode Rod Camco 08143 Replacement Single Element Water Heater Thermostat
Richmond Electric Thermostat, 120 V, Temperature Setting Range: 90 to 150 deg F, Metal/Plastic, 1 in W, 4-1/4 in H, Suitable for: Residential Electric Water Heater Extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion. CAMCO's single element Therm-O-Disc style thermostat with HLC replaces the heating element in RV water heaters. It has an energy efficient range setting and built-in safety switch to prevent overheating. It also comes complete with detailed instructions and wiring diagrams for easy installation.
Fluidmaster B2H18 Water Heater Connector Plumb Pak PP888-10LF Water Heater Connector Rheem / Richmond RP20064 Thermocoupler-Gasket Kits
Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP x MIP Connection, Stainless Steel, 12 in L, Suitable for: Water Heaters Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes 24 in thermocouple, burner door gasket, Tinnerman?? clips, screws, Torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
Camco 10063 Water Heater Connector Plumb Pak PP888-3LF Water Heater Connector ELEMENT HEATER SS LWD 4500W
Seamless corrugated 18 in flexible copper water connectors. 125 psi maximum. LASCO Braided Water Heater Connector, Nominal Size: 3/4 in, FPT Connection, 200 psi, Temperature Rating: 180 deg F, Stainless Steel, 18 in L, Suitable for: Water Heaters Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 240 V, Wattage Rating: 4500 W, Stainless Steel
Camco Mfg 10473 Pressure Relief Valve 3/4 In Camco 2923 Ultra Low Watt Density Water Heater Element Camco 08163 Adjustable Water Heater Upper Thermostat
CAMCO's 3/4 in temperature and pressure valve with 4 in probe will help protect your RV or home water heater from excessive temperature and water pressure. It's factory set at 150 psi and 210 deg F. It features epoxy-coated probe to prevent corrosion buildup. CAMCO's 4500 W/240 V screw-in foldback type ultra-low watt density water heater elements are better suited for areas with problem water. The ultra LWD of this element helps prevent lime deposits and the high-performance nickel-chromium stainless steel alloy sheath gives it additional strength to resist dry firing. The combined effect make the element better suited for use in areas with problem or intermittent water supply. UL listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Camco 2903 Ultra Low Watt Density Water Heater Element Fluidmaster B1H24 Water Heater Connector VALVE T-R 5-1/4IN LONG SHANK
CAMCO's 2500 W/240 V screw-in foldback type ultra-low watt density water heater elements are better suited for areas with problem water. Ultra LWD and special metal surface (high-performance nickel-chromium stainless steel alloy) reduce chances of lime build-up. They resist dry firing and are ideal for problem water areas and locations with intermittent water supply. Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Richmond Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Setting Pressure: 150 psi, Dimensions: 7-1/4 in L, Temperature Rating: 210 deg F, Suitable for: Water Heater
Camco 7843 Single Element Water Heater Thermostat With HLC Watts 100XL-8-125 Temperature and Pressure Relief Valve Camco 7863 Dual Element Upper Water Heater Thermostat With HLC
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar). UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.
Camco 4943 Ultra Low Watt Density Water Heater Element Camco 10493 Temperature and Pressure Relief Valves Plumb Pak PP888-4LF Water Heater Connector
CAMCO's 4500 W/240 V universal flange foldback lime life ultra-low watt density water heater elements are better suited for areas with problem water. Ultra LWD and special metal surface (high-performance nickel-chromium stainless steel alloy) reduce chances of lime build-up. Setting: of 150 psi/210 deg F, stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe. Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP Connection, Stainless Steel, 24 in L, Suitable for: Water Heaters
Plumb Pak PP888-11LF Water Heater Connector ELEMENT HEATER SS LWD 5500W   Watts LL100XL-150/210 Temperature/Pressure Relief Valve
Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP x MIP Connection, Stainless Steel, 18 in L, Suitable for: Water Heaters Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 240 V, Wattage Rating: 5500 W, Stainless Steel Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar).
Watts 100XL-8-150 Temperature and Pressure Relief Valve Camco 2723 Low Watt Density Water Heater Element VALVE T/P 3/4IN 3-5/16LS150PSI
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature Relief of 210 deg F (99 deg C), Pressure Relief Range of 75 to 150psi (5.2 to 10.3 bar). CAMCO's 4500 W 240 V screw-in type low watt density water heater elements are better suited for areas with problem water. Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. This screw-in element has 1-3/8 in thread and is made for state Industries manufactured Duron tank water heaters. Also used in sears Duron tank water heaters. Each element includes two gaskets. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater. The CAMCO T and P relief valve safely relieves excess temperature and pressure in your water heater. The CAMCO T and P valve is safe for use up to 150 psi and/or to 210 deg F. It has a 3/4 in inlet or outlet and a 3-5/16 in long shank. Durable all copper alloy body.
Plumb Pak PP888-12LF Water Heater Connector KIT SENSOR FLAMMABLE VAPOR    Camco 10193 Water Heater Connector Kit
Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP x MIP Connection, Stainless Steel, 24 in L, Suitable for: Water Heaters Richmond FV Sensor Kit, Suitable for: Rheem, Ruud and Richmond FVIR Water Heater The Copper Connector Kit is designed for use with gas or electric systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in x 15 in flexible water connectors, one roll of Teflon tape, two 3/4 in NPT compression adapters and one 1/2 in x 24 in stainless steel gas connector. Tools for installation not included.
Watts 100XL Temperature and Pressure Relief Valve Watts 100XL Temperature and Pressure Relief Valve KIT TUNE UP WATER HEATER
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), pressure relief range is 75 to 150psi (5.2 to 10.3 bar). Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. ASME rated and CSA listed. Temperature relief is 210 deg F (99 deg C), Pressure relief range is 75 to 150psi (5.2 to 10.3 bar). Electric water heater tune-up kits provide a quick and easy way to replace the most common items on the most popular water heaters.
Camco 2953 Ultra Low Watt Density Water Heater Element Plumer's Pack 07013 Thermodisc Contractor Pack Plumer's Pack 07023 Thermostat Contractor
CAMCO's 4500 W/240 V screw-in ripple type ultra-low watt density water heater elements are better suited for areas with problem water. The ultra LWD of this element helps prevent lime deposits d the high-performance nickel-chromium stainless steel alloy sheath gives it additional strength to resist dry firing. The combined effect make the element better suited for use in areas with problem or intermittent water supply. Contains 2 high watt density elements #02342 4500 W 240 V, 1 TOD lower thermostat #08122 and 1 TOD upper thermostat #08162. Contains 2 high watt density elements #02342 4500w 240 V, 1 Apcom style lower thermostat w/protector #07722, 1 Apcom style upper thermostat w/protector #07862.
KIT INSTLN EWH 3/4X15IN CONN  Camco 10183 Water Heater Connector Kit KIT INSTLN GWH 3/4X15IN CONN
Richmond Electric Water Heater Installation Kit, Specifications: 3/4 x 15 in Connectors The Copper Connector Kit is designed for use with gas systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in x 15 in flexible water connectors, one roll of Teflon tape, two 3/4 in NPT compression adapters and one 1/2 in x 24 in stainless steel gas connector. Tools for installation not included. Richmond Gas Water Heater Installation Kit, Specifications: 3/4 x 15 in Connectors
Watts 374A Boiler Pressure Relief Valve THERMOSTAT NATURAL GAS CONTROL Watts 1156F Feed Water Pressure Regulator
Series 374A boiler pressure relief valves are used in hot water boiler applications to protect against excessive pressure on all types of hot water heating boiler equipment. They have an iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring and test lever. Series 374A resists corrosive water conditions, sticking and freezing and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control. Standard pressure setting 30 psi. Pressure range rated up to 550,000 Btu/hr at a 30 psi setting only. Richmond Gas Control Thermostat, 13 in W, 6.8 in H, Suitable for: Water Heater This 1/2 in high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body with union solder inlet and NPT threaded outlet connections, a tight seating check valve, purge lever for manual purging and a stainless steel strainer. It has high capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi.
Camco 08421 Water Heater Valves Camco 08401 Natural Gas Valve THERMOSTAT LP NATL GAS CONTROL
4 in water column, 1-1/4 in shank length, 1/2 in NPT gas inlet by 1/2 in inverted flare outlet, adjustable 70 to 160 deg. Adjustable 70 to 160 deg F. 42,000 BTU. 4 in water column. 1-1/4 in shank length. 1/2 in NPT gas inlet by 1/2 in inverted flare outlet. Richmond Gas Control Thermostat, 12.8 in W, 7-1/2 in H, Suitable for: Water Heater
   
 
1