Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Choose a sub category:
CHAIN - PROOF COIL CHAIN - HIGH TEST CHAIN - STRAIGHT LINK
CHAIN - TWIST LINK CHAIN - JACK CHAIN - TWIN LOOP
CHAIN - SASH CHAIN - DECORATIVE CHAIN - PLASTIC
CHAIN - SPECIALTY GRAB HOOKS SLIP HOOKS
CHAIN - COLD SHUTS CHAIN - LAP LINKS CHAIN - QUICK LINKS
CHAIN - SNAP LINKS CHAIN - SWIVELS CHAIN - CLEVIS LINKS
SPECIALTY FARM HITCH PINS ANCHOR SHACKLES
CLEVISES & PINS SNAPS WELDED RINGS
CHAIN HOISTS LOAD BINDERS POWER HOISTS
Sort By:
1 2 3
SHUT COLD ZINC PLATED 3/16IN National Hardware 3152BC Lap Link National Hardware 3152BC Lap Link
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. National Hardware 3152BC Lap Link, Working Load Limit: 120 lb, Trade Size: 1/8 in, Steel, Zinc National Hardware 3152BC Lap Link, Working Load Limit: 225 lb, Trade Size: 3/16 in, Steel, Zinc
Fehr Bros 1/4IN Anchor Shackle Campbell T7665032 Welded Ring Campbell T7660841 Welded Ring
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #7, Steel, Nickel-Plated Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #4, Steel, Zinc
Campbell T7661152 Welded Ring Campbell T4900324 Cold Shut Campbell T4900424 Cold Shut
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #3, Steel, Nickel-Plated Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
National Hardware 3152BC Lap Link SPRING SNAP STEEL ZN 3/16 Midland Big Orange 081163/MC645G Anchor Shackle
National Hardware 3152BC Lap Link, Working Load Limit: 500 lb, Trade Size: 1/4 in, Steel, Zinc Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
Campbell T7665042 Welded Ring Baron 2450-1/4 Snap Link Campbell T4900524 Cold Shut
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/2 in ID, Chain Size: #3, Steel, Nickel-Plated Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
BREACHING SNAP ZN 2-1/2 Baron 1407 Open Eye Spring Snap National Hardware 3116BC Bit Snap
Baron Bit Snap, Working Load Limit: 80 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 2-1/2 in L Baron Chain Snap, Working Load Limit: 60 lb, Snap Opening Size: 9/32 in, Steel, Zinc, Dimensions: 3-3/8 in L National Hardware 3116BC Bit Snap, Working Load Limit: 115 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 1-3/4 in L
Campbell T7665001 Welded Ring National Hardware 3155BC Ring SHACKLE ANCHOR SCRW PIN 3/16IN
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #7B, Steel, Nickel-Plated National Hardware 3155BC Welded Ring, Working Load Limit: 195 lb, Ring Diameter: 1 in ID, Chain Size: #7, Steel, Zinc Baron Anchor Shackle, Working Load Limit: 0.3 ton, Trade Size: 3/16 in, Pin Type: Screw, Pin Diameter: 1/4 in, Steel, Hot-Dipped Galvanized
National Hardware 3153BC Cold Shut SNP LINK SPRG HK STL ZN 9/32IN Fehr Bros 3/16 Anchor Shackle
National Hardware 3153BC Cold Shut, Working Load Limit: 1250 lb, Trade Size: 1/4 in, Steel, Zinc Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
Midland Big Orange 081253/MC647G Anchor Shackle National Hardware 3155BC Ring LINK LAP ZINC PLT STEEL 5/16IN
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. National Hardware 3155BC Welded Ring, Working Load Limit: 300 lb, Ring Diameter: 2 in ID, Chain Size: #2, Steel, Zinc Baron Chain Lap Link, Working Load Limit: 675 lb, Inside Length: 1-1/2 in, Inside Width: 5/16 in, Steel, Zinc
Campbell T4900624 Cold Shut National Hardware 3153BC Cold Shut SHUT COLD ZINC PLATED 3/8IN
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. National Hardware 3153BC Cold Shut, Working Load Limit: 1900 lb, Trade Size: 5/16 in, Steel, Zinc Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
Campbell T5950724 Repair Lap Link SPRING SNAP ASST AL 5/16 SNP LINK SPRG HK STL ZN 5/16IN
For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit. Baron Spring Snap, Working Load Limit: 150 lb, Snap Opening Size: 1/2 in, Aluminum, Bright, Dimensions: 3-1/8 in L Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device.
SNAP SPRG INTRLK ZN 1/4X2IN Baron 5300-3/8 Round Eye Swivel Bolt Snap SPRING SNAP RNDEYE SWVL 3/8
Designed for lifting, pulling, mooring and other farm, marine and recreational applications. For quick attachment. Steel Body and spring. Baron Bolt Snap, Snap Opening Size: 1/4 in, Zinc, Nickel, Dimensions: 2-1/4 in L Baron Spring Snap, Working Load Limit: 45 lb, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 2-5/8 in L
National Hardware 3000BC Round Swivel Eye Bolt Snap National Hardware 3114BC Breeching Snap SPRING SNAP RNDEYE SWVL 1/4
National Hardware 3000BC Bolt Snap, Working Load Limit: 15 lb, Snap Opening Size: 3/8 in, Zinc, Nickel Chrome, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3114BC Breeching Snap, Working Load Limit: 85 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 2-1/4 in L Baron Spring Snap, Working Load Limit: 20 lb, Snap Opening Size: 3/16 in, Steel, Zinc, Dimensions: 1-7/8 in L
SPRING SNAP STRAP NCKL SWVL5/8 Campbell T7661361 Welded Ring WELDED RING ZINC 1-1/8
Baron Spring Snap, Working Load Limit: 30 lb, Snap Opening Size: 3/16 in, Steel, Nickel, Dimensions: 2-1/2 in L Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2-1/2 in ID, Chain Size: #2, Steel, Zinc Campbell Welded Ring, Working Load Limit: 150 lb, Ring Diameter: 1-1/8 in ID, Chain Size: #7B, Solid Bronze, Polished
SPRING SNAP STEEL ZN 11/32 Baron 125-5/8 Round Eye Swivel Rigid Bolt Snap Baron 5037-3/8 Square Loop Spring Snap
Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Baron Bolt Snap, Snap Opening Size: 3/8 in, Zinc Aluminum Alloy, Nickel Baron Spring Snap, Working Load Limit: 30 lb, Snap Opening Size: 3/16 in, Steel, Nickel
QUICK-LINK ZINC PLATED 1/8IN Koch 4022413 Wire Hair Pin Clip Baron 225-5/8 Round Eye Swivel Bolt Snap
Designed for fast, easy connections between two lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Steel body construction. Koch Wire Hair Pin Clip, 2-15/16 in L, Yellow Zinc Baron Bolt Snap, Working Load Limit: 110 lb, Snap Opening Size: 3/8 in, Zinc Aluminum Alloy, Nickel, Dimensions: 3-1/2 in L
Baron 225-3/4 Round Eye Swivel Bolt Snap National Hardware 3155BC Ring SHUT COLD ZN PLTD STEEL 3/8IN
Baron Bolt Snap, Working Load Limit: 110 lb, Snap Opening Size: 3/8 in, Aluminum/Zinc, Nickel, Dimensions: 3-5/8 in L x 3/4 in W National Hardware 3155BC Welded Ring, Working Load Limit: 270 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #4, Wire Size: 7/32 in, Steel, Zinc Baron Cold Shut, Working Load Limit: 1900 lb, Trade Size: 3/8 in, Inside Length: 1-1/2 in, Inside Width: 5/8 in, Steel, Zinc, Silver
Campbell T5950924 Repair Lap Link National Hardware 3152BC Lap Link Baron C-7350T-3/16 Quick Link
For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit. National Hardware 3152BC Lap Link, Working Load Limit: 725 lb, Trade Size: 5/16 in, Steel, Zinc Baron Quick Link, Opening Size: 1/4 in, Working Load Limit: 660 lb, Steel, Zinc, Dimensions: 1-7/8 in L
National Hardware 3150BC Quick Link QUICK LINK STL ZP 1760LB 3/8IN Midland Big Orange 081293/MC648G Anchor Shackle
National Hardware 3150BC Quick Link, Trade Size: 3/16 in, Working Load Limit: 660 lb, Steel, Zinc Baron Quick Link, Opening Size: 7/16 in, Working Load Limit: 1760 lb, Steel, Zinc, Dimensions: 3-1/8 in L x 3/8 in THK Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
Fehr Bros 5/16 Anchor Shackle Baron 5013-3/8 Round Eye Swivel Trigger Snap BOLT SNAP NICKEL SWIVEL 3-3/16
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Baron Trigger Snap, Working Load Limit: 40 lb, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 2-1/2 in L Baron Bolt Snap, Working Load Limit: 80 lb, Snap Opening Size: 3/8 in, Aluminum/Zinc, Nickel, Dimensions: 3-1/8 in L
Baron 161Z Double Ended Bolt Snap Baron 5013-1/2 Round Eye Swivel Trigger Snap Baron 5025B-3/8 Round Eye Swivel Double Ended Bolt Snap
Baron Chain Snap, Working Load Limit: 70 lb, Snap Opening Size: 1/4 in, Zinc, Nickel, Dimensions: 3-1/2 in L Baron Trigger Snap, Working Load Limit: 40 lb, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 2-1/2 in L x 1/2 in W Baron Bolt Snap, Working Load Limit: 80 lb, Snap Opening Size: 1/4 in, Bronze, Polished, Dimensions: 3 in L
SNAP BOLT SWVL RD NO225Z 1/2IN SNAP BOLT RGD RND NO125Z 5/8IN SNAP BOLT DBL END NO162Z 4IN
Campbell Swiveling Bolt Snap, Working Load Limit: 90 lb, Trade Size: 1/2 in, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 1/2 in Dia x 3-1/2 in L Campbell Round Eye Bolt Snap, Working Load Limit: 90 lb, Trade Size: 5/8 in, Snap Opening Size: 3/8 in, Zinc, Nickel-Plated, Dimensions: 3-3/8 in L Campbell Double-Ended Bolt Snap, Working Load Limit: 60 lb, Snap Opening Size: 3/8 in, Zinc, Nickel-Plated, Dimensions: 4 in L
SNAP BOLT SWVL RD NO225Z 5/8IN SNAP BOLT SWVL RD NO225Z 3/4IN SNAP QUICK SWL RD NO251Z 5/8IN
Campbell Round Eye Bolt Snap, Working Load Limit: 80 lb, Trade Size: 5/8 in, Snap Opening Size: 3/8 in, Zinc, Nickel-Plated, Dimensions: 3-1/2 in L Campbell Bolt Snap, Working Load Limit: 70 lb, Trade Size: 3/4 in, Snap Opening Size: 3/8 in, Zinc, Nickel-Plated, Dimensions: 3-11/16 in L Campbell Swiveling Quick Snap, Working Load Limit: 80 lb, Trade Size: 5/8 in, Snap Opening Size: 5/8 in, Zinc, Nickel, Dimensions: 5/8 in Dia x 3-3/8 in L
SNAP TRIG SWL RD NO5013Z 3/8IN SNAP TRIG SWL RD NO5013Z 1/2IN SNAP BOLT SWVL STRAP NO017 1IN
Campbell Trigger Snap, Working Load Limit: 30 lb, Trade Size: 3/8 in, Snap Opening Size: 3/8 in, Zinc, Nickel-Plated, Dimensions: 2-7/16 in L Campbell Trigger Snap, Working Load Limit: 40 lb, Trade Size: 1/2 in, Snap Opening Size: 3/8 in, Zinc, Nickel-Plated, Dimensions: 2-11/16 in L Campbell Bolt Snap, Working Load Limit: 80 lb, Trade Size: 1 in, Snap Opening Size: 3/8 in, Zinc, Nickel-Plated, Dimensions: 3-3/16 in L
LINK LAP ZINC PLTD STEEL 3/8IN National Hardware 3152BC Lap Link Baron C-7350T-1/4 Quick Link
Baron Lap Link, Working Load Limit: 2400 lb, Inside Length: 1-5/8 in, Inside Width: 3/8 in, Steel, Zinc National Hardware 3152BC Lap Link, Working Load Limit: 1450 lb, Trade Size: 3/8 in, Steel, Zinc Baron Quick Link, Opening Size: 9/32 in, Working Load Limit: 880 lb, Steel, Zinc, Dimensions: 2-1/4 in L
National Hardware 3150BC Quick Link Baron 018-5/8 Round Eye Double End Swivel Koch 4022613 Wire Hair Pin Clip
National Hardware 3150BC Quick Link, Trade Size: 1/4 in, Working Load Limit: 880 lb, Steel, Zinc Baron Chain Swivel, Working Load Limit: 90 lb, Trade Size: 5/8 in, Nickel, Dimensions: 2-3/8 in L Koch Wire Hair Pin Clip, 4 in L, Yellow Zinc
Cambell T9600435 Anchor Shackle Cambell T9600535 Anchor Shackle Baron 5013-3/4 Round Eye Swivel Trigger Snap
Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted. Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted. Baron Trigger Snap, Working Load Limit: 50 lb, Snap Opening Size: 1/2 in, Zinc, Nickel, Dimensions: 2-3/4 in L
Baron 25-1 Double Ended Bolt Snap with Strap Eye Baron 162Z Snap Eye Swivel Rigid Quick Snap SPRING SNAP RNDEYE SWVL 3/4
Baron Bolt Snap with Strap Eye, Working Load Limit: 40 lb, Snap Opening Size: 3/8 in, Aluminum/Zinc, Nickel, Dimensions: 3-1/4 in L Baron Chain Snap, Working Load Limit: 60 lb, Snap Opening Size: 3/8 in, Bronze, Nickel, Dimensions: 4 in L Baron Spring Snap, Working Load Limit: 80 lb, Steel, Zinc, Dimensions: 4-1/2 in L, Suitable for: 5/8 in Rope
Baron 5025-3/8 Round Eye Swivel Bolt Snap Baron 5025B-1/2 Round Eye Swivel Double Ended Bolt Snap National Hardware 3001BC Round Swivel Eye Bolt Snap
Baron Leash Snap, Working Load Limit: 50 lb, Snap Opening Size: 1/4 in, Steel, Nickel, Dimensions: 3 in L Baron Bolt Snap, Working Load Limit: 80 lb, Snap Opening Size: 1/4 in, Bronze, Polished, Dimensions: 3 in L National Hardware 3001BC Bolt Snap, Working Load Limit: 45 lb, Snap Opening Size: 1/2 in, Zinc, Nickel, Suitable for: Animal Leashes, Chain, Rope, Strap
SNAP SPRG INTRLCKNG AL 3-1/8IN SWIVEL ROUND EYE DOUBLE 3/4IN SWIVEL RD EYE DBL NO2225Z 5/8
National Hardware Interlocking Spring Snap, Working Load Limit: 150 lb, Trade Size: 3-1/8 in, Snap Opening Size: 1 in, Wire Diameter: 5/16 in, Aluminum, Multi-Color, Dimensions: 2-11/32 in H x 1-23/32 in W, Suitable for: Rope Campbell Round Eye Swivel, Working Load Limit: 100 lb, Trade Size: 3/4 in, Steel, Nickel, Dimensions: 3/4 in Dia x 3 in L Campbell Chain Swivel, Working Load Limit: 90 lb, Trade Size: 5/8 in, Eye Inside Diameter: 5/8 in, Zinc, Nickel, Dimensions: 2-11/16 in L
SNAP BOLT RIGID STRP NO25Z 1IN Campbell T9001424 Eye Grab Hook BOLT SNAP ZINC RNDEYE SWVL 1/2
Campbell Rigid Eye Bolt Snap, Working Load Limit: 40 lb, Trade Size: 1 in, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 1 in Dia x 3-1/16 in L Drop-forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. Baron Bolt Snap, Working Load Limit: 110 lb, Snap Opening Size: 3/8 in, Malleable Iron, Zinc, Dimensions: 3-1/4 in L
Campbell T7662154 Welded Ring SNAP BOLT SWVL RD NO5025 3/8IN SNAP QCK RGD RD NO249B-0 3/8IN
Campbell Welded Ring, Working Load Limit: 150 lb, Ring Diameter: 2 in ID, Chain Size: #7B, Solid Bronze, Polished Campbell Swiveling Bolt Snap, Working Load Limit: 60 lb, Trade Size: 3/8 in, Snap Opening Size: 5/16 in, Malleable Iron, Nickel, Dimensions: 3/8 in Dia x 2-7/8 in L Campbell Rigid Eye Quick Snap, Working Load Limit: 60 lb, Trade Size: 3/8 in, Snap Opening Size: 9/32 in, Bronze, Dimensions: 3/8 in Dia x 2-5/32 in L
SHACKLE ANCHOR SCREW PIN 3/8IN BUSHING REDUCING TL CAT 2-3 National Hardware 3153BC Cold Shut
Baron Anchor Shackle, Working Load Limit: 1 ton, Trade Size: 3/8 in, Pin Type: Screw, Pin Diameter: 7/16 in, Steel, Hot-Dipped Galvanized Top link reducer bushings from Koch Industries are yellow zinc-plated and available for category zero through three tractors. Allows for lower category implements to be used on tractors that are one category higher. National Hardware 3153BC Cold Shut, Working Load Limit: 4500 lb, Trade Size: 1/2 in, Steel, Zinc
National Hardware 3112BC Interlocking Spring Snap SNAP SPRG ASST COLOR 3-1/8IN Baron 018-3/4 Round Eye Double End Swivel
National Hardware 3112BC Spring Snap, Working Load Limit: 165 lb, Snap Opening Size: 5/16 in, Steel, Zinc National Hardware TP3113BC Spring Snap, Working Load Limit: 150 lb, Aluminum, Dimensions: 3-1/8 in L Baron Chain Swivel, Working Load Limit: 100 lb, Trade Size: 3/4 in, Iron, Nickel, Dimensions: 2-3/4 in L
Cambell T9600635/T9640635 Anchor Shackle Fehr Bros 3/8 Anchor Shackle Midland Big Orange 081343/MC649G Anchor Shackle
Campbell Anchor Shackle, Working Load Limit: 1000 lb, Trade Size: 3/8 in, Pin Type: Screw, Carbon Steel, Zinc Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.
CAP SNAP ROUNDEYE SWIVEL 3/4 National Hardware 3003BC Round Swivel Eye Bolt Snap National Hardware 3003BC Round Swivel Eye Bolt Snap
Baron Spring Snap, Working Load Limit: 145 lb, Snap Opening Size: 1/4 in, Malleable Iron, Electro-Galvanized, Dimensions: 2-3/4 in L x 3/4 in W National Hardware 3003BC Bolt Snap, Working Load Limit: 115 lb, Snap Opening Size: 5/8 in, Zinc, Nickel, Dimensions: 3-1/2 in L, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3003BC Bolt Snap, Working Load Limit: 120 lb, Snap Opening Size: 3/4 in, Zinc, Nickel, Dimensions: 3-11/16 in L, Suitable for: Animal Leashes, Chain, Rope, Strap
National Hardware 3006BC Fixed Eye Round Bolt Snap National Hardware 3041BC Round Swivel Eye Trigger Snap BOLT SNAP NCKL RNDEYE SWVL 1/2
National Hardware 3006BC Bolt Snap, Working Load Limit: 130 lb, Snap Opening Size: 5/8 in, Zinc, Nickel Chrome, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3041BC Trigger Snap, Working Load Limit: 60 lb, Snap Opening Size: 1/2 in, Zinc, Nickel Chrome, Suitable for: Animal Leashes, Rope Baron Bolt Snap, Working Load Limit: 250 lb, Snap Opening Size: 3/8 in, Zinc Aluminum Alloy, Nickel, Dimensions: 3-1/4 in L
QUICK SNAP RNDEYE SWVL 5/8 National Hardware 3155BC Ring SNAP QUICK SWVL RND NO251Z 1IN
Baron Quick Snap, Working Load Limit: 40 lb, Snap Opening Size: 1/2 in, Zinc, Nickel, Dimensions: 3-1/4 in L National Hardware 3155BC Welded Ring, Working Load Limit: 300 lb, Ring Diameter: 2-1/2 in ID, Chain Size: #2, Steel, Zinc Campbell Quick Snap, Working Load Limit: 70 lb, Trade Size: 1 in, Snap Opening Size: 5/8 in, Zinc, Nickel-Plated, Dimensions: 3-13/16 in L
SNAP BOLT DBEND NO163Z 4-5/8IN SNAP BOLT SWVL RD NIC PLTD 1IN SNAP TRIG SWL RD NO5015Z 3/4IN
Campbell Bolt Snap, Working Load Limit: 70 lb, Snap Opening Size: 7/16 in, Zinc, Nickel-Plated, Dimensions: 4-5/8 in L Campbell Bolt Snap, Working Load Limit: 90 lb, Trade Size: 1 in, Snap Opening Size: 1/2 in, Zinc, Nickel-Plated, Dimensions: 4-1/4 in L Campbell Swiveling Trigger Snap, Working Load Limit: 90 lb, Trade Size: 3/4 in, Snap Opening Size: 9/16 in, Malleable Iron, Nickel, Dimensions: 3/4 in Dia x 4 in L
SWIVEL DBL ROUND EYE NIC 1 IN National Hardware 3021BC Double Bolt Snap SHACKLE ANCHOR GALV 3/16IN
Baron Chain Swivel, Working Load Limit: 100 lb, Trade Size: 1 in, Nickel, Dimensions: 3-1/8 in L National Hardware 3032BC Bolt Snap, Working Load Limit: 100 lb, Zinc, Nickel Chrome, Dimensions: 3-15/16 in L, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware Anchor Shackle, Working Load Limit: 650 lb, Trade Size: 3/16 in, Inside Width: 11/16 in, Wire Diameter: 7/32 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Steel, Steel, Galvanized, Suitable for: Rope or Chain, Includes: Removable Screw Pin
BOAT SNAP BRZ 7/16X2-1/8 SNAP QCK RGD RD NO249B-1 5/8IN QUICK-LINK ZINC PLATED 5/16IN
National Hardware Ceiling Hook, Working Load Limit: 75 lb, Trade Size: 7/16 x 2-1/8 in, Zinc, Bronze, Dimensions: 2 in L x 0.85 in W x 0.7 in H, Suitable for: Chain, Cord, Leashes, Rope and Strap Campbell Quick Snap, Working Load Limit: 70 lb, Trade Size: 5/8 in, Snap Opening Size: 3/4 in, Bronze, Polished, Dimensions: 2-7/8 in L Designed for fast, easy connections between two lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Steel body construction.
Baron C-2450-3/8 Snap Link National Hardware 3135BC Round Eye Snap Swivel QUICK SNAP NCKL RNDEYE SWVL 1
Baron Spring Hook Snap Link, Working Load Limit: 400 lb, Steel, Nickel, Dimensions: 4 in L, Includes: Spring Hook National Hardware 3252BC Chain Swivel, Working Load Limit: 105 lb, Trade Size: 5/8 in, Zinc, Nickel, Suitable for: Connecting Chain or Rope Baron Quick Snap, Working Load Limit: 70 lb, Snap Opening Size: 1/2 in, Zinc, Nickel, Dimensions: 3-3/4 in L
BOLT SNAP ZN OPENEYE RIGID 3/8 Baron 231 Open Eye Bolt Snap Baron 225-1 Round Eye Swivel Bolt Snap
Baron Chain Snap, Working Load Limit: 40 lb, Snap Opening Size: 5/16 in, Malleable Iron, Electro-Galvanized, Dimensions: 3-1/4 in L Baron Chain Snap, Working Load Limit: 60 lb, Snap Opening Size: 3/8 in, Malleable Iron, Electro-Galvanized, Dimensions: 3-1/2 in L Baron Bolt Snap, Working Load Limit: 110 lb, Snap Opening Size: 3/8 in, Zinc-Aluminum Alloy, Nickel
BOLT SNAP NICKEL DBL END 4-5/8 Baron C-225-5/8 Round Eye Swivel Quick Snap National Hardware 3013BC Double Bolt Snap
Baron Chain Snap, Working Load Limit: 70 lb, Snap Opening Size: 3/8 in, Metal, Nickel, Dimensions: 4-5/8 in L Baron Bolt Snap, Working Load Limit: 110 lb, Snap Opening Size: 3/8 in, Aluminum/Zinc, Nickel National Hardware 3031BC Bolt Snap, Working Load Limit: 85 lb, Zinc, Nickel Chrome, Dimensions: 3-7/16 in L, Suitable for: Animal Leashes, Chain, Rope, Strap
National Hardware 3013BC Rectangular Swivel Eye Bolt Snap National Hardware 3171BC Swivel Eye Bolt Snap SNAP SPRG INTRLCKNG BLK 1/4IN
National Hardware 3013BC Bolt Snap, Working Load Limit: 70 lb, Snap Opening Size: 1 in, Zinc, Nickel Chrome, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3171BC Bolt Snap, Working Load Limit: 150 lb, Snap Opening Size: 7/16 in, Bronze, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware Interlocking Spring Snap, Working Load Limit: 150 lb, Trade Size: 1/4 in, Snap Opening Size: 5/16 in, Wire Diameter: 1/4 in, Stainless Steel/Steel, Black, Dimensions: 2-3/8 in H x 1-1/5 in W, Suitable for: Rope
LINK SNAP SPRG ZP STEEL 1/2IN SWIVEL RD EYE DBL NO2225Z 1IN SNAP BOLT RGD RND NO125 5/8IN
Campbell Spring Snap Link, Working Load Limit: 230 lb, Trade Size: 1/2 in, Snap Opening Size: 0.46 in, Wire Diameter: 0.35 in, Steel, Zinc, Dimensions: 3.53 in L Campbell Chain Swivel, Working Load Limit: 100 lb, Trade Size: 1 in, Eye Inside Diameter: 1 in, Zinc, Nickel, Dimensions: 3-9/16 in L Campbell Rigid Eye Bolt Snap, Working Load Limit: 70 lb, Trade Size: 5/8 in, Snap Opening Size: 11/32 in, Malleable Iron, Zinc, Dimensions: 5/8 in Dia x 5 in L
DOUBLE BOLT SNAP NIC 3-15/16IN National Hardware 3244BC Removable Eye Grab Hook Campbell T4900824 Cold Shut
National Hardware Double Bolt Snap, Working Load Limit: 100 lb, Trade Size: 3-15/16 in, Zinc, Nickel National Hardware Eye Grab Hook, Working Load Limit: 2600 lb, Trade Size: 1/4 in, 43 Grade, Steel, Blue, Suitable for: Grade 43 or Lower-Grade Chains Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Baron 2450-3/8 Snap Link National Hardware 3112BC Interlocking Spring Snap National Hardware 3052BC Swivel Eye Spring Snap
Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. National Hardware 3112BC Spring Snap, Working Load Limit: 315 lb, Snap Opening Size: 3/8 in, Steel, Zinc, Dimensions: 3-1/8 in L National Hardware 3052BC Spring Snap, Working Load Limit: 70 lb, Snap Opening Size: 3/4 in, Zinc, Nickel, Suitable for: Animal Leashes, Chain, Rope, Strap
National Hardware 3102BC Swivel Eye Snap Hook National Hardware 3171BC Round Swivel Eye Bolt Snap National Hardware 3177BC Double Bolt Snap
National Hardware 3102BC Snap Hook, Working Load Limit: 125 lb, Snap Opening Size: 3/4 in, Zinc, Nickel, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3171BC Bolt Snap, Working Load Limit: 110 lb, Snap Opening Size: 1/2 in, Solid Bronze, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3177BC Bolt Snap, Working Load Limit: 115 lb, Solid Bronze, Dimensions: 3-7/16 in L, Suitable for: Animal Leashes, Chain, Rope, Strap
National Hardware TP3033B Double Bolt Snap National Hardware 3172BC Swivel Eye Bolt Snap National Hardware 3180BC Rectangular Swivel Eye Trigger Snap
National Hardware 3033BC Bolt Snap, Working Load Limit: 130 lb, Zinc, Nickel Chrome, Dimensions: 4-9/16 in L, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3172BC Bolt Snap, Working Load Limit: 170 lb, Snap Opening Size: 3/4 in, Bronze, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3180BC Trigger Snap, Working Load Limit: 105 lb, Snap Opening Size: 1/2 in, Bronze, Dimensions: 2-5/8 in L, Suitable for: Animal Leashes, Chain, Rope, Strap
National Hardware 3155BC Ring SHACKLE ANCHOR SS 3/16IN SNAP BOLT SWVL RND NO225 1/2IN
National Hardware 3155BC Welded Ring, Working Load Limit: 850 lb, Ring Diameter: 3 in ID, Chain Size: #1, Steel, Zinc National Hardware Anchor Shackle, Working Load Limit: 650 lb, 316 Grade, Trade Size: 3/16 in, Inside Length: 15/16 in, Inside Width: 5/8 in, Wire Diameter: 3/16 in, Width Between Eyes: 11/32 in, Pin Type: Screw, Pin Diameter: 1/4 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain Campbell Swiveling Bolt Snap, Working Load Limit: 110 lb, Trade Size: 1/2 in, Snap Opening Size: 3/8 in, Malleable Iron/Steel, Zinc, Dimensions: 1/2 in Dia x 4 in L
SNAP BOLT RGD OPEN NO231 3/8IN Campbell T9001524 Eye Grab Hook QUICK LINK 316 SS 132LB 1/8IN
Campbell Rigid Eye Bolt Snap, Working Load Limit: 60 lb, Trade Size: 3/8 in, Snap Opening Size: 13/32 in, Malleable Iron/Steel, Zinc, Dimensions: 3/8 in Dia x 3-1/2 in L Drop-forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. Baron Quick Link, Opening Size: 3/16 in, Working Load Limit: 132 lb, 316 Stainless Steel, Dimensions: 1-3/8 in L x 1/8 in THK
National Hardware 3112BC Interlocking Spring Snap SNAP SPRG INTRLK ZN 5/8X4.72IN QUICK SNAP RNDEYE RIGID 3/8
National Hardware 3112BC Spring Snap, Working Load Limit: 360 lb, Snap Opening Size: 1/2 in, Steel, Zinc, Dimensions: 3-15/16 in L National Hardware 3112BC Interlocking Spring Snap, Working Load Limit: 738 lb, Snap Opening Size: 5/8 in, Wire Diameter: 7/16 in, Steel, Zinc, Dimensions: 4.72 in L Baron Quick Snap, Snap Opening Size: 5/16 in, Bronze, Dimensions: 2-7/8 in L
National Hardware 3042BC Round Swivel Eye Trigger Snap National Hardware 3172BC Round Swivel Eye Bolt Snap National Hardware 3155BC Ring
National Hardware 3042BC Trigger Snap, Working Load Limit: 80 lb, Snap Opening Size: 3/4 in, Zinc, Nickel Chrome, Suitable for: Animal Leashes, Rope National Hardware 3172BC Bolt Snap, Working Load Limit: 150 lb, Snap Opening Size: 13/16 in, Bronze, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3155BC Welded Ring, Working Load Limit: 300 lb, Ring Diameter: 1-1/2 in ID, Chain Size: #3, Steel, Zinc
BOAT SNAP BRZ 5/8X2-3/4 BOLT SNAP BRZ 1/4X3-7/16 LINK SNAP SPRG ZP STEEL 5/8IN
National Hardware Boat Snap with Fixed Round Eye, Working Load Limit: 120 lb, Trade Size: 5/8 x 2-3/4 in, Zinc, Bronze, Dimensions: 2.7 in L x 1.1 in W x 1 in H, Suitable for: Chains, Cords, Leashes, Ropes and Straps National Hardware Boat Snap with Fixed Round Eye, Working Load Limit: 150 lb, Trade Size: 1/4 x 3-7/16 in, Zinc, Bronze, Dimensions: 3-1/2 in L, Suitable for: Chain, Cord, Leashes, Rope and Strap Campbell Spring Snap Link, Working Load Limit: 280 lb, Trade Size: 5/8 in, Snap Opening Size: 0.55 in, Wire Diameter: 0.39 in, Steel, Zinc, Dimensions: 4.01 in L
SNAP CAP SWVL RND NO830 3/4IN SNAP SPRING STRP RGD NO200 1IN HOOK EYE GRB BLU STL 1/4IN
Campbell Swiveling Cap Snap, Working Load Limit: 100 lb, Trade Size: 3/4 in, Snap Opening Size: 11/32 in, Malleable Iron/Steel, Zinc, Dimensions: 3/4 in Dia x 3-1/2 in L Campbell Rigid Eye Spring Snap, Working Load Limit: 90 lb, Trade Size: 1 in, Snap Opening Size: 7/16 in, Malleable Iron/Steel, Zinc, Dimensions: 1 in Dia x 3-1/4 in L Designed for making quick connections with chain in industrial and construction applications. Meets grade 43 hook specifications. Manufactured from forged steel. For use with chain of an equal or lower-grade. Not designed for over-head lifting.
Campbell T9100424 Eye Slip Hook QUICK LINK 316 SS 660LB 1/4IN Baron C-7350T-5/16 Quick Link
Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Baron Quick Link, Opening Size: 9/32 in, Working Load Limit: 660 lb, 316 Stainless Steel, Dimensions: 2-1/4 in L x 1/4 in THK Baron Quick Link, Opening Size: 3/8 in, Working Load Limit: 1760 lb, Steel, Zinc, Dimensions: 2-15/16 in L
National Hardware 3150BC Quick Link SPRING SNAP LINK SS 1/4 Baron 225BT-3/4 Snap Eye Swivel Bolt Snap
National Hardware 3150BC Quick Link, Trade Size: 3/8 in, Working Load Limit: 2640 lb, Steel, Zinc Baron Spring Snap, Working Load Limit: 80 lb, Snap Opening Size: 5/16 in, Stainless Steel, Dimensions: 2-3/8 in L Baron Bolt Snap, Working Load Limit: 96 lb, Snap Opening Size: 3/8 in, Solid Bronze, Polished, Dimensions: 3-3/8 in L
CAP SNAP ROUNDEYE SWIVEL 11/16 National Hardware 3004BC Round Swivel Eye Bolt Snap National Hardware 3174BC Round Swivel Eye Bolt Snap
Baron Spring Snap, Working Load Limit: 190 lb, Snap Opening Size: 1/4 in, Malleable Iron, Electro-Galvanized National Hardware 3004BC Bolt Snap, Working Load Limit: 100 lb, Snap Opening Size: 1-1/4 in, Zinc, Nickel, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3174BC Bolt Snap, Working Load Limit: 150 lb, Snap Opening Size: 1 in, Bronze, Suitable for: Animal Leashes, Chain, Rope, Strap
QUICK LINK STORMSHINE 3/16 QUICK LINK STORMSHINE 1/8 LINK SNAP QUICK 316L SS 1/8IN
National Hardware Quick Link, Trade Size: 3/16 in, Opening Size: 7 mm, Working Load Limit: 660 lb, Steel, Storm Shine National Hardware Quick Link, Trade Size: 1/8 in, Opening Size: 5 mm, Working Load Limit: 220 lb, Steel, Storm Shine Campbell Quick Snap Link, Working Load Limit: 220 lb, Trade Size: 1/8 in, Snap Opening Size: 0.19 in, Stainless Steel, Dimensions: 1.45 in L
SHACKLE SCRW PIN HT GALV 3/8IN SNAP BOLT DBLEND NO162 13/32IN SNAP BOLT DBL END NO163 3/8IN
Campbell Double-Ended Bolt Snap, Working Load Limit: 70 lb, Trade Size: 4-1/8 in, Snap Opening Size: 13/32 in, Iron, Zinc, Dimensions: 4-1/8 in L Campbell Double-Ended Bolt Snap, Working Load Limit: 110 lb, Trade Size: 4-3/4 in, Snap Opening Size: 3/8 in, Malleable Iron, Zinc, Dimensions: 4-3/4 in L
SNAP BOLT SWVL RND NO225 5/8IN SNAP BOLT RNDEYE SWVL 3/4IN SNAP BOLT RGD OPEN NO232 1/2IN
Campbell Swiveling Bolt Snap, Working Load Limit: 110 lb, Trade Size: 5/8 in, Snap Opening Size: 3/8 in, Malleable Iron/Steel, Zinc, Dimensions: 5/8 in Dia x 4 in L Campbell Rigid Eye Bolt Snap, Working Load Limit: 60 lb, Trade Size: 1/2 in, Snap Opening Size: 7/16 in, Malleable Iron/Steel, Zinc, Dimensions: 1/2 in Dia x 4 in L
SHACKLE ANCHOR SCRW PIN 7/16IN LINK QUICK ZINC PLTD STL 1/2IN HOOK GRAB CLEVIS 1/4IN
Baron Anchor Shackle, Working Load Limit: 1.5 ton, Trade Size: 7/16 in, Pin Type: Screw, Pin Diameter: 1/2 in, Steel, Hot-Dipped Galvanized Campbell Quick Snap Link, Working Load Limit: 3300 lb, Trade Size: 1/2 in, Snap Opening Size: 0.57 in, Steel, Zinc, Dimensions: 4.17 in L Baron Clevis Grab Hook, Working Load Limit: 2600 lb, Trade Size: 1/4 in, Steel, Electro-Galvanized, Suitable for: 1/4 in Chain
SNAP BOLT DBL END NO161 3/8IN SNAP BOLT RGD OPN NO231B 3/8IN HOOK EYE GRB BLU STL 5/16IN
Campbell Double-Ended Bolt Snap, Working Load Limit: 70 lb, Trade Size: 3-1/2 in, Snap Opening Size: 9/32 in, Malleable Iron, Zinc, Dimensions: 3-1/2 in L Campbell Bolt Snap, Working Load Limit: 70 lb, Trade Size: 3/8 in, Snap Opening Size: 3/8 in, Bronze, Polished, Dimensions: 3-13/32 in L Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting.
National Hardware 3153BC Cold Shut QUICK LINK 316 SS 440LB 3/16IN SNAP SPRG CAMO ALU/STL 3-1/8IN
National Hardware 3153BC Cold Shut, Working Load Limit: 3500 lb, Trade Size: 7/16 in, Steel, Zinc Baron Quick Link, Opening Size: 1/4 in, Working Load Limit: 440 lb, 316 Stainless Steel, Dimensions: 1-7/8 in L x 3/16 in THK National Hardware TP3113BC Spring Snap, Working Load Limit: 150 lb, Aluminum, Camouflage, Dimensions: 3-1/8 in L
Fehr Bros 1/2 Anchor Shackle National Hardware N223-669 Anchor Shackle Baron 232 Open Eye Bolt Snap
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware 3250BC Anchor Shackle, Working Load Limit: 1000 lb, Pin Type: Screw, Galvanized Steel Baron Chain Snap, Working Load Limit: 60 lb, Snap Opening Size: 3/8 in, Malleable Iron, Electro-Galvanized, Dimensions: 4 in L
SHACKLE ANCHOR SS 1/4IN BOAT SNAP BRZ 3/4X3-3/8 BOAT SNAP BRZ 5/8X3-7/8
National Hardware Anchor Shackle, Working Load Limit: 1100 lb, 316 Grade, Trade Size: 1/4 in, Inside Length: 1-1/32 in, Inside Width: 25/32 in, Wire Diameter: 1/4 in, Width Between Eyes: 1/2 in, Pin Type: Screw, Pin Diameter: 5/16 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain, Includes: Removable Screw Pin National Hardware Boat Snap with Fixed Round Eye, Working Load Limit: 180 lb, Trade Size: 3/4 x 3-3/8 in, Zinc, Bronze, Dimensions: 3.2 in L x 1.5 in W x 1.35 in H, Suitable for: Chain, Cord, Leashes, Rope and Strap National Hardware Boat Snap with Swivel Round Eye, Working Load Limit: 100 lb, Trade Size: 5/8 x 3-7/8 in, Zinc, Bronze, Dimensions: 2.95 in L x 1.05 in W x 0.5 in H, Suitable for: Chain, Cord, Leashes, Rope and Strap
EYE SLIP HK CS ZN 2600LB 1/4IN SNAP BOLT SWVLRD NO5025B 3/8IN SNAP TRIG SWL RD NO5013B 1/2IN
Baron Eye Slip Hook, Working Load Limit: 2600 lb, Trade Size: 1/4 in, 43 Grade, Zinc Campbell Swiveling Bolt Snap, Working Load Limit: 80 lb, Trade Size: 3/8 in, Snap Opening Size: 1/4 in, Bronze, Dimensions: 3/8 in Dia x 2-15/16 in L Campbell Swiveling Trigger Snap, Working Load Limit: 40 lb, Trade Size: 1/2 in, Snap Opening Size: 1/2 in, Bronze, Dimensions: 1/2 in Dia x 2-1/2 in L
Baron 660-1/2 Lap Link Baron C-7350T-3/8 Quick Link National Hardware 3167BC Quick Link
Used to connect two pieces of chain or chain to eyelet, snap, ring and more. Baron Quick Link, Opening Size: 7/16 in, Working Load Limit: 2200 lb, Steel, Zinc, Dimensions: 3-1/8 in L National Hardware 3167BC Quick Link, Trade Size: 1/8 in, Working Load Limit: 300 lb, Stainless Steel
SPRING SNAP INTRLOCK SS 1/4 SNAP SPRG INTRLK ZN 3/4X5.51IN Cambell T9600835/T9640835 Anchor Shackle
Baron Spring Snap, Working Load Limit: 400 lb, Snap Opening Size: 5/16 in, Stainless Steel, Dimensions: 2-3/8 in L Designed for lifting, pulling, mooring and other farm, marine and recreational applications. For quick attachment. Steel Body and spring. Campbell Anchor Shackle, Working Load Limit: 2000 lb, Consumer Grade, Trade Size: 1/2 in, Pin Type: Screw, Pin Material: Carbon Steel, Carbon Steel, Zinc
Midland Big Orange 081373/MC650G Anchor Shackle National Hardware N223-677 Anchor Shackle Baron 5013B-1/2 Round Eye Swivel Trigger Snap
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. National Hardware 3250BC Anchor Shackle, Working Load Limit: 1500 lb, Galvanized Steel Baron Trigger Snap, Working Load Limit: 40 lb, Snap Opening Size: 3/8 in, Solid Bronze, Polished, Dimensions: 2-1/2 in L x 1/2 in W
Baron 225BT-5/8 Round Eye Swivel Bolt Snap Baron 225BT-1 Round Eye Swivel Bolt Snap QUICK SNAP SWIVEL 5/8
Baron Bolt Snap, Working Load Limit: 96 lb, Snap Opening Size: 3/8 in, Bronze, Polished, Dimensions: 3-1/4 in L Baron Bolt Snap, Working Load Limit: 130 lb, Snap Opening Size: 7/16 in, Bronze, Polished, Dimensions: 3-5/8 in L x 1 in W Baron Quick Snap, Working Load Limit: 60 lb, Snap Opening Size: 5/16 in, Bronze, Polished, Dimensions: 3-1/4 in L
National Hardware 3191BC Round Swivel Eye Boat Snap National Hardware 3178BC Double Bolt Snap SNAP SPRG INTRLCKNG BLK 5/16IN
National Hardware 3191BC Boat Snap, Working Load Limit: 220 lb, Snap Opening Size: 3/4 in, Solid Bronze National Hardware 3178BC Bolt Snap, Working Load Limit: 215 lb, Bronze, Dimensions: 4-1/8 in L National Hardware Interlocking Spring Snap, Working Load Limit: 300 lb, Trade Size: 5/16 in, Snap Opening Size: 3/8 in, Wire Diameter: 5/16 in, Stainless Steel/Steel, Black, Dimensions: 3-5/32 in H x 1-19/32 in W, Suitable for: Rope
QUICK LINK STORMSHINE 1/4 HOOK GRAB CLEVIS 70 GRD 1/4IN SNAP BOLT DBLEND NO161B 5/16IN
National Hardware Quick Link, Trade Size: 1/4 in, Opening Size: 8 mm, Working Load Limit: 880 lb, Steel, Storm Shine Baron Clevis Grab Hook, Working Load Limit: 2600 lb, Trade Size: 1/4 in, 70 Grade, Steel, Electro-Galvanized Campbell Bolt Snap, Working Load Limit: 60 lb, Snap Opening Size: 5/16 in, Bronze, Polished, Dimensions: 3-13/32 in L
SNAP BOLT SWVLRND NO225B 5/8IN SNAP BOLT SWVLRND NO225B 3/4IN SNAP QCK SWL RD NO251B-1 5/8IN
Campbell Bolt Snap, Working Load Limit: 70 lb, Trade Size: 3/4 in, Snap Opening Size: 3/8 in, Bronze, Polished, Dimensions: 3-1/8 in L Campbell Swiveling Quick Snap, Working Load Limit: 60 lb, Trade Size: 5/8 in, Snap Opening Size: 5/16 in, Bronze, Dimensions: 5/8 in Dia x 3-1/8 in L
National Hardware 3244BC Removable Eye Grab Hook Cambell T9501424 Clevis Grab Hook National Hardware 3167BC Quick Link
National Hardware Eye Grab Hook, Working Load Limit: 5400 lb, Trade Size: 3/8 in, 43 Grade, Steel, Blue, Suitable for: Grade 43 or Lower-Grade Chains Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. National Hardware 3167BC Quick Link, Trade Size: 3/16 in, Working Load Limit: 1150 lb, Stainless Steel
Baron 231B Double Ended Bolt Snap Baron 3142 Round Eye Swivel Security Snap National Hardware 3172BC Round Swivel Eye Bolt Snap
Baron Chain Snap, Working Load Limit: 70 lb, Snap Opening Size: 3/8 in, Bronze, Polished, Dimensions: 3-1/2 in L Baron Security Snap, Working Load Limit: 300 lb, Snap Opening Size: 1/2 in, Malleable Iron, Nickel, Dimensions: 4 in L National Hardware 3172BC Bolt Snap, Working Load Limit: 225 lb, Snap Opening Size: 1-1/4 in, Solid Bronze, Suitable for: Animal Leashes, Chain, Rope, Strap
LCK SPR SNP STORMSHINE 1/4X2 LINK SNAP QUICK 316L SS 3/16IN HOOK GRAB CLEVIS 5/16
National Hardware Interlocking Spring Snap, Working Load Limit: 146 lb, Trade Size: 1/4 x 2 in, Steel, Storm Shine Campbell Quick Link, Working Load Limit: 660 lb, Trade Size: 3/16 in, Snap Opening Size: 0.24 in, Stainless Steel, Dimensions: 0.195 in Dia x 1.94 in L Baron Clevis Grab Hook, Working Load Limit: 3900 lb, Opening Size: 5/16 in, Steel, Galvanized
HOOK EYE SLIP 5/16IN HOOK SLIP CLEVIS 1/4IN National Hardware 3240BC Removable Clevis Grab Hook
Baron Eye Slip Hook, Trade Size: 5/16 in, 43 Grade, Carbon Steel, Electro-Galvanized Baron Clevis Slip Hook, Working Load Limit: 2600 lb, Trade Size: 1/4 in, Carbon Steel, Electro-Galvanized National Hardware Clevis Grab Hook, Working Load Limit: 3900 lb, Trade Size: 5/16 in, Steel, Blue, Suitable for: Grade 43 or Lower-Grade Chains
Campbell T9001624 Eye Grab Hook Campbell T9101524 Eye Slip Hook Cambell T9401424 Clevis Slip Hook
Drop-forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
SWIVEL FORGED GALV 3/16IN Baron 161B Double Ended Bolt Snap Baron 249BT-2 Round Eye Swivel Quick Snap
Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Baron Chain Snap, Working Load Limit: 70 lb, Snap Opening Size: 3/8 in, Bronze, Polished, Dimensions: 3-1/2 in L Baron Quick Snap, Snap Opening Size: 7/16 in, Bronze, Dimensions: 3-1/4 in L
National Hardware 3179BC Double Bolt Snap National Hardware 3105BC Round Swivel Eye Snap Hook QUICK SNAP RNDEYE RIGID 3/8
National Hardware 3179BC Bolt Snap, Working Load Limit: 140 lb, Bronze, Dimensions: 4-1/2 in L, Suitable for: Animal Leashes, Chain, Rope, Strap National Hardware 3105BC Snap Hook, Working Load Limit: 165 lb, Snap Opening Size: 1 in, Zinc, Nickel, Dimensions: 4-5/8 in L, Suitable for: Animal Leashes, Chain, Rope, Strap Baron Quick Snap, Working Load Limit: 350 lb, Snap Opening Size: 3/16 in, Stainless Steel, Dimensions: 2-1/8 in L
BOLT SNAP ZINC DBL END 4-5/8 SHACKLE ANCHOR SS 5/16IN LCK SPR SNAP SSF 5/16X2-3/8
Baron Bolt Snap, Snap Opening Size: 3/8 in, Malleable Iron, Nickel, Dimensions: 4-5/8 in L National Hardware Anchor Shackle, Working Load Limit: 1650 lb, 316 Grade, Trade Size: 5/16 in, Inside Length: 1-3/16 in, Inside Width: 27/32 in, Wire Diameter: 9/32 in, Width Between Eyes: 9/16 in, Pin Type: Screw, Pin Diameter: 13/32 in, Pin Material: Stainless Steel, Stainless Steel, Suitable for: Rope or Chain National Hardware Interlocking Spring Snap, Working Load Limit: 300 lb, Trade Size: 5/16 x 2-3/8 in, Steel, Storm Shine
BOAT SNAP BRZ 3/4X3-13/16 BOAT SNAP BRZ 3/4X4-7/16 LINK SNAP SPRING 316L SS 1/4IN
National Hardware Boat Snap with Fixed Round Eye, Trade Size: 3/4 x 3-13/16 in, Zinc, Bronze, Dimensions: 3.81 in L x 0.75 in W x 0.6 in H, Suitable for: Chains, Cords, Leashes, Ropes and Straps National Hardware Boat Snap with Swivel Round Eye, Trade Size: 3/4 x 4-7/16 in, Zinc, Bronze, Dimensions: 3.85 in L x 1.3 in W x 0.7 in H, Suitable for: Chain, Cord, Leashes, Rope and Strap Campbell Spring Snap Link, Working Load Limit: 160 lb, Trade Size: 1/4 in, Snap Opening Size: 0.34 in, Wire Diameter: 0.226 in, Stainless Steel, Dimensions: 0.37 in Dia x 2.38 in L
SWIVEL EYE/EYE FGD GALV 3/16IN SNAP CAP SWVL ROUND NO830 1IN SNAP BOLT SWVL ROUND NO225 1IN
Campbell Eye and Eye Swivel, Working Load Limit: 700 lb, Trade Size: 3/16 in, Inside Length: 0.81 in, Inside Width: 0.7 in, Steel, Galvanized Campbell Swiveling Cap Snap, Working Load Limit: 190 lb, Trade Size: 1 in, Snap Opening Size: 7/16 in, Malleable Iron, Zinc, Dimensions: 1 in Dia x 4-1/2 in L Campbell Swiveling Bolt Snap, Working Load Limit: 100 lb, Trade Size: 1 in, Snap Opening Size: 15/32 in, Malleable Iron/Steel, Zinc, Dimensions: 1 in Dia x 4-5/8 in L
SNAP ANIMAL TIE SW NO3142Z 7/8 HOOK SLIP CLEVIS 5/16IN HOOK SLIP CLEVIS 70 GRD 1/4IN
Campbell Swiveling Animal Tie Snap, Working Load Limit: 150 lb, Trade Size: 7/8 in, Snap Opening Size: 7/8 in, Zinc, Nickel, Dimensions: 7/8 in Dia x 4-13/16 in L Baron Clevis Slip Hook, Working Load Limit: 3900 lb, Trade Size: 5/16 in, 43 Grade, Carbon Steel, Electro-Galvanized, 4 in H Baron Clevis Slip Hook with Latch, Working Load Limit: 3150 lb, Trade Size: 1/4 in, 70 Grade, Yellow Chromate
SHACKLE ANCHOR SCREW PIN 1/2IN SNAP BOLT SWVL RND NO225B 1IN SNAP QCK SWL RD NO251B-2 11/16
Baron Anchor Shackle, Working Load Limit: 2 ton, Trade Size: 1/2 in, Pin Type: Screw, Pin Diameter: 5/8 in, Steel, Hot-Dipped Galvanized Campbell Swiveling Bolt Snap, Working Load Limit: 90 lb, Trade Size: 1 in, Snap Opening Size: 3/8 in, Bronze, Dimensions: 1 in Dia x 3-17/32 in L Campbell Quick Snap, Working Load Limit: 60 lb, Trade Size: 11/16 in, Snap Opening Size: 7/16 in, Bronze, Polished, Dimensions: 3-11/16 in L
National Hardware 3246BC Eye Slip Hook Baron C-2450-1/2 Snap Link National Hardware 3166BC Interlocking Spring Snap
National Hardware 3243BC Eye Slip Hook, Working Load Limit: 3900 lb, Trade Size: 5/16 in, Steel, Blue, Suitable for: Equal or Lower Grade Chains Baron Spring Hook Snap Link, Working Load Limit: 600 lb, Snap Opening Size: 1/2 in, Steel, Nickel, Dimensions: 5-1/2 in L, Includes: Spring Hook National Hardware 3166BC Spring Snap, Working Load Limit: 400 lb, Snap Opening Size: 5/16 in, Stainless Steel, Zinc, Dimensions: 2-3/8 in L
SWIVEL FORGED GALV 1/4IN QUICK SNAP BRNZ RNDEYE SWVL3/4 BOAT SNAP BRZ 3/4X3-5/8
Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Baron Quick Snap, Working Load Limit: 60 lb, Snap Opening Size: 1/2 in, Solid Bronze, Polished, Dimensions: 3-3/4 in L National Hardware Boat Snap with Swivel Round Eye, Working Load Limit: 115 lb, Trade Size: 3/4 x 3-5/8 in, Zinc, Bronze, Dimensions: 3.25 in L x 1.15 in W x 0.5 in H, Suitable for: Chain, Cord, Leashes, Rope and Strap
BOAT SNAP BRZ 7/8X3-7/8 LINK SNAP QUICK 316L SS 1/4IN SNAP BOLT DBEND NO161B 4-1/2IN
National Hardware Boat Snap with Swivel Round Eye, Working Load Limit: 220 lb, Trade Size: 7/8 x 3-7/8 in, Zinc, Bronze, Dimensions: 4 in L x 1.55 in W x 0.65 in D, Suitable for: Chain, Cord, Leashes, Rope and Strap Campbell Quick Snap Link, Working Load Limit: 880 lb, Trade Size: 1/4 in, Snap Opening Size: 0.3 in, Stainless Steel, Dimensions: 2.28 in L Campbell Bolt Snap, Working Load Limit: 100 lb, Snap Opening Size: 13/32 in, Bronze, Polished, Dimensions: 4-1/2 in L
Cambell T9501524 Clevis Grab Hook Baron C-330-1/4 Clevis Grab Hook National Hardware 3253BC Removable Clevis Grab Hook
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Baron Clevis Grab Hook, Working Load Limit: 2600 lb, Opening Size: 1/4 in, Steel, Electro-Galvanized National Hardware Clevis Grab Hook, Working Load Limit: 4700 lb, Trade Size: 5/16 in, Steel, Yellow Chrome, Suitable for: Grade 70 or Lower-Grade Transport Chains
National Hardware 3242BC Clevis Slip Hook National Hardware 3242BC Clevis Slip Hook National Hardware 3246BC Eye Slip Hook
National Hardware 3242BC Clevis Slip Hook, Working Load Limit: 2600 lb, Opening Size: 1/4 in, Steel, Blue, Suitable for: Equal or Lower Grade Chains National Hardware 3242BC Clevis Slip Hook, Opening Size: 5/16 in, Pin Hole Diameter: 0.438 in, Steel, Blue, Suitable for: Equal or Lower Grade Chains National Hardware 3243BC Eye Slip Hook, Working Load Limit: 5400 lb, Trade Size: 3/8 in, Steel, Blue, Suitable for: Equal or Lower Grade Chains
HOOK EYE GRB BLU STL 1/4IN National Hardware 3150BC Quick Link National Hardware 3167BC Quick Link
Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Latch keeps connection in place until purposefully removed. Manufactured from forged steel. For use with chain of an equal or lower-grade. Not designed for over-head lifting. National Hardware 3150BC Quick Link, Trade Size: 1/2 in, Working Load Limit: 3300 lb, Steel, Zinc National Hardware 3167BC Quick Link, Trade Size: 1/4 in, Working Load Limit: 1800 lb, Stainless Steel
SPRING SNAP LINK SS 5/16 SNAP SPRG INTRLK ZNC 1X4.2IN Fehr Bros 5/8 Anchor Shackle
Baron Spring Snap, Working Load Limit: 280 lb, Snap Opening Size: 3/8 in, Stainless Steel, Zinc, Dimensions: 3-1/8 in L, Includes: Spring Hook Designed for lifting, pulling, mooring and other farm, marine and recreational applications. For quick attachment. Steel Body and spring. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.
National Hardware 3250BC Anchor Shackle National Hardware 3172BC Swivel Eye Bolt Snap PANIC SNAP NCKL RND RIGID 1/2
National Hardware 3250BC Anchor Shackle, Working Load Limit: 2000 lb, Pin Type: Screw, Galvanized Steel National Hardware 3172BC Bolt Snap, Working Load Limit: 380 lb, Snap Opening Size: 1-1/4 in, Solid Bronze, Suitable for: Animal Leashes, Chain, Rope, Strap Baron Panic Snap, Working Load Limit: 140 lb, Snap Opening Size: 5/8 in, Malleable Iron, Nickel, Dimensions: 4 in L
SNAP SPRG INTERLOCKING BLK 6IN QUICK LINK STORMSHINE 5/16 LOCK SPR SNAP SSF 5/8X4-3/4
National Hardware Interlocking Spring Snap, Working Load Limit: 200 lb, Trade Size: 6 in, Snap Opening Size: 1-31/32 in, Wire Diameter: 7/16 in, Aluminum/Steel, Black, Dimensions: 6-7/32 in H x 3-11/16 in W, Suitable for: Rope National Hardware Quick Link, Trade Size: 5/16 in, Opening Size: 10 mm, Working Load Limit: 1760 lb, Steel, Storm Shine National Hardware Interlocking Spring Snap, Working Load Limit: 738 lb, Trade Size: 5/8 x 4-3/4 in, Steel, Storm Shine
LCK SPR SNAP SSF 3/8X3-1/8 EYE SLIP HK CS ZN 5400LB 3/8IN HOOK SLIP CLEVIS 70 GRD 5/16IN
National Hardware Interlocking Spring Snap, Working Load Limit: 315 lb, Trade Size: 3/8 x 3-1/8 in, Steel, Storm Shine Baron Eye Slip Hook, Working Load Limit: 5400 lb, Trade Size: 3/8 in, 43 Grade, Carbon Steel, Zinc Baron Clevis Safety Slip Hook, Working Load Limit: 4700 lb, Trade Size: 5/16 in, 70 Grade, Carbon Steel, Yellow Chromate, Silver
Campbell T9503415 Clevis Grab Hook Campbell T9700424 Clevis Slip Hook with Latch HOOK CLVS GRB CHRMT/YEL 5/16IN
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Zinc finish. Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower-grade. Manufactured from forged steel. Not designed for over-head lifting.
Baron 82180/196 Double Clevis Link National Hardware 3248BC Double Clevis Link CLEVIS LINK STEEL 6600LB 3/8IN
Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high-test) chain without welding or peening. National Hardware 3248BC Clevis Link, Working Load Limit: 5400 lb, 43 Grade, Trade Size: 3/8 in, Steel, Zinc, Suitable for: Equal or Lower Grade Chains Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting.
National Hardware 3110BC Fixed Eye Round Snap Hook National Hardware 3142BC Swivel Eye Cattle Snap SHACKLE ANCHOR SS 3/8IN
National Hardware 3110BC Forged Hook, Working Load Limit: 1050 lb, Snap Opening Size: 5/8 in, Steel, Zinc-Plated, Dimensions: 3-1/2 in L National Hardware 3142BC Cattle Snap, Working Load Limit: 250 lb, Snap Opening Size: 1 in, Malleable Iron, Nickel, Dimensions: 4-1/8 in L National Hardware Anchor Shackle, Working Load Limit: 2200 lb, 316 Grade, Trade Size: 3/8 in, Inside Length: 1-3/8 in, Inside Width: 1 in, Wire Diameter: 3/8 in, Width Between Eyes: 21/32 in, Pin Type: Screw, Pin Diameter: 15/32 in, Pin Material: Stainless Steel, Stainless Steel, Includes: Removable Screw Pin
   
 
1 2 3