Home > HAND TOOLS > STRIKING AND CUTTING TOOLS > RIPPING/CHISELING
Choose a sub category:
WRECKING BARS PRY BARS AND PULLERS PINCH BARS
NAIL & TACK PULLERS NAIL SETS COLD CHISELS
PUNCHES & DRIFTS COLD CHISEL/PUNCH SETS HOLE PUNCHES
AWLS AND BRAD DRIVERS
Sort By:
1
Stanley 58-113 Square Nail Set Stanley 58-111 Nail Set Stanley 58-112 Square Nail Set
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down. Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down. Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
Stanley 58-911 Square Nail Set Stanley 58-912 Square Nail Set Stanley 58-913 Square Nail Set
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
PUNCH CENTER 5/64X4-1/2IN     PUNCH CENTER 1/8X5/16X5IN     PUNCH CENTER 5/32X5-1/2IN
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
PUNCH CENTER 1/4X6IN          Stanley 16-287 Cold Chisel General Tools 806 Jiffy Self-Center Punch
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes.
Dasco 592-0 Pin Punch Dasco 530-0 Center Punch Dasco 539-0 Prick Punch
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
ProSource JLO-0193L Pry Bars Dasco 531-0 Center Punch Dasco 540-0 Prick Punch
The Vulcan pry bar is made from dropped forged steel. It has a matte black finish and the nail slots at both ends offer easy accessibility and leverage. Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
Wonder Bar II 55-045 Flat Pry Bar Dasco 541-0 Prick Punch Vaughan & Bushnell 222 Double Ended Mini Pry Bar
The wonder bar is constructed from forged carbon steel which provides durability and strength. The bar is ideal for removing nails, lifting and prying objects. Beveled cutting edges and nail slots for quality performance. Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points. Vaughan Mini Bar, Steel, Powder-Coated, 5-1/2 in L
CHISEL CLD 3/8 CUT 5-1/2 LGTH CHISEL COLD 1/2 CUT 6 LGTH    Dasco 581-0 Pin Punch
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/8 in tip and 5-1/2 L. Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1/2 in tip and 6 in L. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 582-0 Pin Punch Dasco 583-0 Pin Punch Dasco 584-0 Pin Punch
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 532-0 Center Punch AWL SCRATCH PLASTIC HNDL 4IN  CHISEL CLD 5/8 CUT 6-1/2 LGTH
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. The scratch awls has a high impact plastic handle length of 4 in with a hardened and tempered steel blade. It can be used to start holes in soft wood and scribe or mark wood or other soft metals. Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 5/8 in tip and 6-1/2 L.
NAIL PUNCH SET 4PC            Dasco 253-0 Roll Pin Punch Dasco 589-0 Pin Punch
It enables you to quickly and easily locate the tool around the head of the protruding nail. Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Toolbasix JLO-0323L  Tack Pullers CHISEL CLD 3/4IN CUT 7IN LGTH Dasco 564-0 Solid Punch
The Vulcan claw is made of heat-treated carbon steel blade with a square plastic handle. Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/4 in tip and 7 in L. Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
Dasco 565-0 Solid Punch Dasco 534-0 Center Punch Great Neck Saw BD1 Magnetic Brad Nail Driver
Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. The GreatNeck? magnetic brad and nail driver gets the job done without marring surfaces. This driver is ideal for working in tight corners and hard to reach spaces. The magnetic head holds the nail firm while downward pressure on an ergonomic solid wood handle easily inserts the nail. The driver is chrome-plated to resist rust. A metal ferrule is set firmly into the handle for durability.
Mintcraft JLO-0093L  Pry Bars Stanley 58-230 Square Head Nail Set Dasco 400-0 Cold Chisel
The Vulcan pry bar nail puller is made of dropped forged steel with hexagon steel construction for enhanced strength. It's a single claw tool. Made of hardened and tempered alloy steel with square head. Round knurled body. Tips are cupped and chamfered. Square head prevents rolling. 4 in long. Set contains 1/32 in, 1/16 in and 3/32 in nails. Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
Dasco 401-0 Cold Chisel Dasco 405-0 Cold Chisel Dasco 566-0 Solid Punch
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
Dasco 590-0 Pin Punch Vulcan 32941 Wrecking Bars Vaughan & Bushnell BT90 90 deg Double Ended Pry Bar
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Heat-treated, stamped 9-1/2 in steel flat bar. Nail slot and sharpened scraper blades. Rust-resistant powder-coated finish.
Dasco 402-0 Cold Chisel Dasco 406-0 Cold Chisel Dasco 255-0 Roll Pin Punch
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft.
General Tools 72 Revolving Punch Plier Stanley 69-122 Scratch Awl Dasco 408-0 Cold Chisel
Spring tensioned, self opening tool made of plated steel with cushioned vinyl grip with revolving turret that has six hardened steel punches: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 5/32 in and 3/16 in; used to make tiny holes in leather, plastic, rubber, canvas and other lightweight materials. Heat-treated and plated alloy steel blades hold up to repeated use and are corrosion resistance. Chrome-plated steel ferrule for added strength. Bright, smooth finish on bar. Machined hardwood handle. Bar diameter of 3/16 in and length 3-3/8 in. Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
Dasco 413-0 Cold Chisel Dasco 417-0 Cold Chisel Hyde Tools 45600 Pry Bar/Scrapers 20 16
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Use to remove molding, open boxes, scrape paint and pull nails. High-carbon steel hardened and tempered, curved ground scraping end with nail slot. Fits easily into tool boxes or pouches.
Wonder Bar 55-515 Flat Pry Bar Stanley 55-033 Single Ended Nail Claw Vaughan & Bushnell NP12G Single Ended Nail Puller With Grip
Get the prying power you need with the 12-3/4 in Wonder Bar? Pry Bar. The strong high-carbon steel hand tool is designed to give you excellent leverage for pulling nails, lifting and scraping. Heat-treated for durability with a special extracting claw and a beveled nail slot. Designed for extracting deeply imbedded nails, these 12 in pullers are forged of 5/8 in hex, high-carbon steel. Claw(s) hardened and tempered for strength and long life. Rust-resistant powder-coated finish.
DeWalt DWHT58503 4-In-1 Dasco 431-0 Scratch Awl Stanley 55-818 Ripping Chisel
Interchangeable tip for convenience. Hexagonal head prevents rolling and can be used as a standard drill chuck - nail set doubles as drill extension. Knurled locking collar for easy nail release and reversal. Accepts standard screwdriver bits for versatility. Long, beveled tip for easy nail head alignment. Fully hardened, precision-milled steel for long life. Set includes 1/32 in, 2/32 in, 3/32 in and #2 point Phillips nails. A handy, economical tool for both the contractor and do-it-yourselfers, the Dasco Pro giant circle beam compass lets you scribe accurate circles up to 10 ft in Dia or larger using a 1/2 in OD dowel rod, PVC or rigid metal tubing as the beam. Ideal for basic demolition work, the offset pattern ripping chisel allows for side pulling and ripping and has a slotted claw and beveled ends for functionality and performance.
Crescent FB13 Flat Pry Bar PRY BAR DBL END NAIL PLLR 11IN Stanley 16-291 Cold Chisel
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying. The Vulcan pry bar nail puller is made from drop-forged steel with hexagon steel construction for enhanced strength. It's a double claws tool and be used for precision nail pulling and prying. The 1 in cold chisel is strong and durable. Its hardened, quenched and tempered for long life and strength. With one-piece construction and powder-coated finish this tool is ready for heavy-duty work like chopping through hard, abrasive materials.
CHISEL COLD 1IN CUT 8IN LGTH  General Tools 70079 Utility Center Punch CTR PUNCH&NAIL SET 3/16X2/32IN
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1 in tip and 8 in L. Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed. Hit Tool Center Punch and Nail Set, 3/16, 2/32 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L
NAIL STARTER & SET 2/32IN     NAIL SET COMBO 1/32 X 2/32IN  NAIL SET COMBO 2/32 X 3/32IN
Hit Tool Hammerless Nail Starter and Set, 2/32 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L Introducing the HIT Tool 1/32 in (#1) nail set and 2/32 in (#2) nail set combination hammerless spring tool model #NS1NS2. This dual-tipped, spring actuated tool has a 1/32 in nail setter on one end and a 2/32 in nail setter on the other. These nail sets are designed to efficiently set and countersink finish nails and brads into wood surfaces. The dual headed design features two of the most commonly used sizes for trim and finishing jobs. Utilizing the HIT Tool's patent pending hammerless impact technology, this tool is compact and lightweight yet provides precision accuracy even in tight spaces. The comfort grip provides for effortless and safe control of the extremely powerful, high-tensile spring. These features combine to create a versatile tool that would make a great addition to any toolbox. The HIT Tool 2/32 in (#2) nail set and 3/32 in (#3) nail set combination hammerless spring tool model #NS2NS3. This dual tipped, spring actuated tool has a 2/32 in nail setter on one end and a 3/32 in nail setter on the other. These nail sets are designed to efficiently set and countersink finish nails and brads into wood surfaces. The dual headed design features two of the most commonly used sizes for trim and finishing jobs. Utilizing the HIT Tool's patent pending hammerless impact technology, this tool is compact and lightweight yet provides precision accuracy even in tight spaces. The comfort grip provides for effortless and safe control of the extremely powerful, high tensile spring. These features combine to create a versatile tool that would make a great addition to any toolbox.
FatMax 55-101 Wrecking Bar BAR PRY W/SHOCKSHIELD 12 IN   Estwing HB-15 Double Ended
PRY BAR 15 INCH 18 OZ
Our Price: $13.99
The high-carbon steel wrecking bar is quite durable and ideal for heavy demolition jobs. It has a tri-lobe design which provides a secure grip for ease of use as well as a slotted claw and beveled ends for functionality and performance. Our 12 in Pry Bar has a SHOCKSHIELD? grip for ultimate vibration reduction. This pry bar is designed to withstand the toughest of jobsite conditions while remaining sharp enough to pry, pull and scrape in tight spaces. The claws are induction hardened for added strength, ensuring long lasting sharpness over the life of the tool. The high leverage head of the pry bar is designed for easier prying. Bar is forged half round, for added strength and less weight with wide, thin blade for easy prying.
Crescent FB15 Flat Pry Bar Stanley 55-117 Double Ended Stanley 55-114 Double Ended Precision Claw Bar
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying. Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying. The 10 in claw bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished beveled claws are ideal for precision nail pulling and prying, tempered body to help reduce spalling and its forged, high-carbon steel construction, this tool is ideal for small demolition projects.
Stanley 55-116 Double Ended BAR WRECKNG STL 108 MINI 7.5IN DeWalt DWHT55518 Double Ended Flat Pry Bar
The 8 in molding bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished flat surface and beveled claws for prying molding and trim, tempered body to help reduce spalling and its forged, high-carbon steel construction, this tool is ideal for removing trim with minimal damage. A small, useful steel 7-1/2 in wrecking bar that can be used to pull small nails, remove wood strips or to open cans. The 12 in flat bar has a wide prying end for leverage. This bar has multiple nail pullers and point beveled ends for efficient nail removal.
Estwing HC-10 Single Ended Handy Claw Dasco 410-0 Long Cold Chisel Dasco 337-0 Utility Chisel
Estwing's Handy claw is the best tool for getting under and removing nails, with a comfortable vinyl grip. Dasco Pro long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Dasco Pro long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
Stanley 16-298 Cold Chisel Set Vulcan 32942 Wrecking Bars BAR PRY LIGHT DUTY 3PC
Made of one-piece forged chrome vanadium steel. Hardened, quenched and tempered for long life and safety. Powder coat finish for increased visibility. Set contains 3/8 in, 1/2 in and 5/8 in. Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. The Stanley three-piece, light-duty pry bar set comes with three bar sizes to use for multiple applications. Stamped one-piece steel construction with teardrop nail pullers for easy nail removal. Lightweight design for easy carrying and high visibility power-coated finish.
ProSource TC031-3 Utility Bars Wonder Bar X21 55-526 Flat Pry Bar Vaughan & Bushnell BC8 Bear Claw Double Ended Bear Claw Nail Puller
The Vulcan utility bar is made from dropped forged steel (hardness for blade HRC 38-42) 6 mm thick. It has a matte black finish and nail slots at both ends offer easy accessibility and leverage. The Stanley wonder bar X21 pry bar is designed for easier prying, lifting and nail pulling. It features forged high-carbon steel construction for increased strength and durability. Its 21 in length allows better reach and greater leverage. The pry bar has a high-visibility, powder-coated finish for long-lasting wear. Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant powder-coat finish.
Stanley 55-035 Double Ended Nail Puller Crescent MB8 Pry Bar FatMax 16-332 Handguarded Cold Chisel
Heat-treated for durability with a double end, 90 deg and 30 deg, puller and fully sharpened claw tips. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying. STANLEY Cold Chisel with Guard, 1 in Tip, 1.33 in L Blade, Steel Blade, Rubber Handle, Handle Color: Black/Yellow, 5.11 in Handle, 12 in OAL
General Tools 87 Center Punch CHISEL COLD 3PC SET           PUNCH REVOLVING HEAVY DUTY
Provides accurate center punches without drill bit traveling, one-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Replaceable hardened steel point and black oxide finish prevents rust. Features heavy-duty, chrome alloy steel with baked enamel. Includes 3 pieces: (1) 5/16 x 5 in, (1) 5/8 x 6-1/2 in, (1) 3/4 x 7 in chisels. For punching round holes in leather, plastic, rubber, canvas, cardboard and similar materials; special compound joint design requires less effort than other punch pliers; spring tension, self-opening revolving punch; six tapered, hollow, hardened steel, non-clogging punches; plastic grips for comfort and control. Punch sizes: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 5/32 in and 3/16 in.
BAR PRY W/SHOCKSHIELD 15 IN   Superbar B215 Double Ended Pry Bar BAR CLAW W/DIMPLER 10IN
Our 15 in Pry Bar has a SHOCKSHIELD? grip for ultimate vibration reduction. This pry bar is designed to withstand the toughest of jobsite conditions while remaining sharp enough to pry, pull and scrape in tight spaces. The claws are induction hardened for added strength, ensuring long lasting sharpness over the life of the tool. The high leverage head of the pry bar is designed for easier prying. Super Bar 15 in is an essential tool for homeowners and tradesmen. Shepherd's Crookin rocker head design for maximum prying power. Useful for prying molding, scraping and pulling nails. Forged, spring tempered steel for heavy-duty use. Three beveled nail slots; polished, sharp blades for easy insertion. The 10 in claw bar with extra wide strike face helps to prevent damage to wood by exposing the head of the nail.
General Tools 77 Center Punch PULLER NAIL FINISH 9IN        Vulcan 32943 Wrecking Bars
Lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Our 9 in finish nail puller is equipped with our SMOOTHPULL? high-leverage head delivering maximum leverage for quick nail removal. The durable grip is wear-resistant for continual comfort over the life of the tool and reduces vibration when the nail puller is struck by a hammer. The beveled edges of the nail puller claws allow for better grip on hard-to-reach nails. The sharpened claws and integrated nail removal feature on the head of the tool provide you with effective ways to remove embedded nails, reducing damage to surrounding materials. The unique head geometry, combined with optimized 6D to 12D nail slots, deliver increased efficiency on the jobsite. Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
Vulcan 32944 Wrecking Bars Vaughan & Bushnell NP12DE Double Ended Nail Puller Stanley 55-115 Double Ended Precision Claw Bar
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Designed for extracting deeply imbedded nails, these 11 in pullers are forged of 5/8 in hex, high-carbon steel. Claws are hardened and tempered for strength and long life. Blue, rust-resistant powder-coated finish. Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying.
Dasco 603-0 Drift Punch 17" OFFSET RIPPING CHISEL     DeWalt DWHT55528 Double Ended
Made of heat-treated, high-carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Target head" render long service. Drop-forged heat-treated steel construction. Offset, hexagon steel with large capacity extracting claws and combination puller. Used for industrial demolition, ripping out nails, walls, studs and framework. Stock size 2-1/4 in, black oxide finish resists rust and corrosion. The 21 in flat bar is made of spring steel for strength and durability and has multiple nail pullers for flexibility and nail removal.
Super Wonder Bar 55-525 Contoured Pry Bar Vaughan & Bushnell BC10 Bear Claw Double Ended Bear Claw Nail Puller Dasco 606-0 Drift Punch
Useful for almost any prying, mail pulling, wood-splitting or levering job you are likely to encounter, The WonderBar? is the tool for you. Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant finish. Made of heat-treated, high-carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Target head" render long service.
FatMax 55-102 Wrecking Bar DeWalt DWHT55129 Double Ended Wrecking Bar Superbar B215L Double Ended Pry Bar
The high-carbon steel wrecking bar is quite durable and ideal for heavy demolition jobs. It has a tri-lobe design which provides a secure grip for ease of use as well as a slotted claw and beveled ends for functionality and performance. The 24 in wrecking bar is ideal for general demolition projects. Designed for comfort and strength, this bar has multiple nail pullers and point beveled ends for efficient nail removal. B215L superbar 21 in is an essential tool for homeowners and tradesmen. "Shepherd's crook" rocker head design for maximum prying power. Useful for prying molding, scraping and pulling nails. Forged, spring tempered steel for heavy-duty use. Rust-resistant powder coat finish. Three beveled nail slots polished, sharp blades for easy insertion. Made in USA.
Dasco 91 Pry Bar Kit With Nail Puller BAR MOLDING 10IN              Crescent MB10 Pry Bar
Ideal for pulling trim, molding, baseboards, nails, scraping and cleaning flat surfaces, straight and curved blades with nail pullers. Made from high carbon U.S.A. steel with full penetration heat-treated for excellent strength. Kit includes (1) of each 9 pry/trim/scraper bar, 5-1/2 in Lil pry bar and 7-1/2 in Ultra pry bar. The 10 in molding bar extra wide strike surface coupled with it's 40% wider head helps to prevent wall damage when prying trim and molding. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
Dasco 419-0 Long Cold Chisel Dasco 22 Pin Punch Kit Dasco 44 Cold Chisel Kit
Dasco Pro long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Dasco Pro offers the most frequently used and popular items in kits. Professionals and homeowners alike can grab a kit with confidence that they have the most sought after tool for the job. Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper.
Crescent MB12 Flat Pry Bar DeWalt DWHT55131 Double Ended Wrecking Bar DeWalt DWHT55132 Double Ended Wrecking Bar 42 in L
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying. The 36 in wrecking bar is ideal for general demolition projects. Designed for comfort and strength, this bar has multiple nail pullers and point beveled ends for efficient nail removal. The 42 in wrecking bar is ideal for general demolition projects. Designed for comfort and strength, this bar has multiple nail pullers and point beveled ends for efficient nail removal.
Vaughan & Bushnell BC12 Bear Claw Double Ended Bear Claw Nail Puller General Tools 79 Center Punch FatMax 55-104 Wrecking Bar
Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant powder-coat finish. Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable. The high-carbon steel wrecking bar is quite durable and ideal for heavy demolition jobs. It has a tri-lobe design which provides a secure grip for ease of use as well as a slotted claw and beveled ends for functionality and performance.
Estwing PB-18 Lightweight Pry Bar 18 in L Dasco 30 Punch and Chisel Kit NAIL SET&DR PIN REMV 1/32X2/32
Estwing's Lightweight I-beam construction pry bar has beveled nail slot. It's I-beam construction gives added strength while removing weight. Rocking head provides maximum leverage. Made of heat-treated, high carbon American steel. Set contain (1) 402 3/8 in x 5-5/8 in cold chisel, (1) 406 5/8 in x 6-3/4 in cold chisel, (1) 532 7/16 in x 5 in center punch, (1) 562 5-1/2 in long starter punch and (1) 582 1/8 in x 5-1/2 in pin punch. Introducing the HIT Tool pro combo kit includes 1/32 in (#1) and 2/32 in (#2) combination nail setter with door hinge pin punch (2 piece) hammerless spring tool set model #NS12HF. This two pack contains two combination hammerless spring tools. The first dual tipped, spring actuated tool has a 1/32 in nail setter on one end and a 2/32 in nail setter on the other. The second tool has a door hinge pin punch on one end and a steel hammer on the other. The nail sets are designed to efficiently set and countersink finish nails and brads into wood surfaces. The dual headed design features two of the most commonly used sizes for trim and finishing jobs. The door hinge pin punch quickly and effortlessly removes hinge pins from door hinges, while the steel hammer allows for a precise striking force to replace hinge pins without damaging the trim or doors. Utilizing the HIT Tool's patent pending hammerless impact technology, the tools are compact and lightweight yet provide precision accuracy even in tight spaces.
Vaughan & Bushnell BC14 Double Ended Bear Claw Nail Puller FatMax 55-119 Functional Utility Bar BAR WRECK 8LB 42IN LGTH
Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant powder-coat finish. One piece forged steel bar that serves as a 4-in-1 tool for prying, splitting, board bending and striking jobs. Made of tempered steel with a textured grip weighs 2.5 lb. Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
PULLER MOLDING HEAVY DUTY STL BAR PRY MULTI-FUNCTION 40IN   Crescent DB16 Adjustable Multi-Functional Pry Bar With Nail Pull
The Hyde? molding puller was designed to remove baseboard, trim and other molding materials from walls without damage to those materials. Due to its heavy-duty construction, this molding puller also excels at a secondary use for tile, carpet and other types of flooring removal. The patent pending Hyde? molding puller design has a built-in "wedge" feature on the 90 deg angle that can safely be driven between the materials. It works by spreading the applied force out along a larger surface area and gradually increasing the angle away from the wall to avoid damage. Renovators, contractors and deck builders will all benefit from the lightweight, durable, multifunctional utility bar. The increased functionality leads to less tools on the jobsite. This bar features a 2x4 grabber, striking surface, 7/8 in tri-lobe stock and an extra wide pry end with precision ground edges. Multi-functional utility bar for both demolition and renovation projects, adjustable jaws for straightening, pulling and prying, crow bar end, nail extractor and striking head, extendable jaws quickly allows you to pull, pry or straighten any board up to 5.5 in or increase the access and force of the nail extractor.
Vulcan 32939 Pinch Point Bars Dasco 11 Roll Pin Punch Kit BAR DEMOLITION 4-IN-1 18IN
Drop-forged and heat-treated for added strength during prying, digging and tamping. Made of heat-treated high carbon American steel. Used for driving and removing pins, keys and more. Machined from high-carbon steel Set contains 1/8 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in and 5/16 in. Made from one piece forged steel bar for increased durability with two tiered jaws for grabbing common dimensional lumber and decking. Beveled nail slot for pulling and prying nails. Textured grip.
Vulcan 32946 Wrecking Bars Crescent DB18X Flat Indexing Pry Bar Crescent DB24 Adjustable Multi-Functional Pry Bar With Nail Pull
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Head indexes over 180 deg and locks into 16 positions for increased access 90 deg flat head offers better access and wider support for prying against surfaces; striking pas assists users with penetration and prying. Multi-functional utility bar for both demolition and renovation projects, adjustable jaws for straightening, pulling and prying, crow bar end, nail extractor and striking head, extendable jaws quickly allows you to pull, pry or straighten any board up to 5.5 in or increase the access and force of the nail extractor.
Vulcan 32937 San Angelo Bars Crescent DB30X Flat Indexing Pry Bar Vulcan 32940 Pinch Point Bars
Drop-forged and heat-treated for excellent strength during prying, digging and tamping. Hexagon steel construction for enhanced strength, 1 in blade width. Head indexes over 180 deg and locks into 16 positions for increased access 90 deg flat head offers better access and wider support for prying against surfaces; striking pas assists users with penetration and prying. Drop-forged and heat-treated for added strength during prying, digging and tamping.
Allway PB1 Single Ended Pry Bar Vulcan 32938 Wedge Point Bars Dasco 88 Punch and Chisel Kit
PRY BAR - Case of 10
Our Price: $44.99
Hardened and ground high carbon steel. Removes nails, moldings and more. Drop-forged and heat-treated for excellent strength during prying and tamping. Contains 5/16 in, 5/8 in, 3/4 in cold chisels, 1/16 in, 1/8 in, 5/32 in, 3/16 in, 1/4 in, 5/16 in pin punch, 1/4 in center punch, 3/8 in prick punch and 7 in scratch awl. Scratch awl is ideal for starting screw holes. cold chisels are used for cutting and shaping metal that is softer than the cutting edge. Pin punches are used to remove a pin or key. Center punches are used for making accurate hole starting easier and prick punches are used to mark and scribe work pieces. Made of high-carbon, heat-treated American steel.
PULLER NAIL ATLE 8IN          Stanley 93-310 Board Bender Deck Tool NAIL PULLER W/INDXNG HEAD 12IN
A versatile and easy-to-use nail puller. Despite its small size, it can easily pull out a 5 in nail, even when the head is off or buried deep in the wood. Made of extra heavy duty carbon steel with 5/8" high-carbon steel bar. Use the hook on joists and push handle down to squeeze boards tight, or use to straighten decking or joists. The cushioned handle is designed for kneeling to maintain pressure; frees both hands for nailing. Tackle your next renovation or demolition project with the latest innovations from Crescent. The Code Red tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand and just get the job done faster and easier than before. The Code Red Series of tools offers a wide array of demolition and renovation tools. The indexing nail puller has 14 locking positions for quick adjustments up to 180 deg for maximum leverage. Designed to reach between studs, joist and other tight work spaces, this indexing nail puller will help you get the job done every time.
Vaughan & Bushnell 222CS Double Ended Mini Pry Bar NAIL PULLER 12IN W/DIMPLER    BAR UTILITY 30 INCH LGTH
High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots. The original Stiletto? titanium framing nail puller with the patented nail removal feature developed for pulling common nails easily and cleanly. Multi-purpose demolition tool made of one piece forged steel with a sledge hammer face, ripping hook and a textured grip. Weighs 8.5 lb.
BAR WRECKING STL ADJ 209 SB/25
Wrecking bar manufactured in high quality steel with ergonomic rubber-clad handle. Articulated claw adjustable to nine different positions features notched end ideal for pulling out nails. The curved section at the chisel makes space for the hand and minimizes the risk of crushing damage.
   
 
1