Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL CONNECTORS
Choose a sub category:
WIRENUTS / CONNECTORS TERMINAL LUGS ELECTRICAL TAPE/DUCT SEAL
WIRE TERMINAL ENDS TUBING & WRAPS ANTI-OXIDANTS
SPLIT BOLT CONNECTORS SPLICER / REDUCERS CABLE STAPLES
CABLE TIES WIRE CLAMPS/CLIPS GLUES / CEMENTS
WIRE MANAGEMENT KITS ELECTRICAL BUSHINGS ELECTRICAL GROMMETS
MISC WIRING CONNECTORS
Sort By:
1 2 3 4
SAFETY PLATE F/WD STUD 3X1/2IN ProSource CV200SW-253L Cable Tie ProSource CV200S-253L Cable Tie
Southwire Hammer Protection Plate, Steel, Galvanized, Silver, 3 in L, 1-1/2 in W, 1/16 in Thick For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2. For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2.
Gardner Bender 20-410 Crimp Sleeve Connector Gardner Bender GSE-15310 Service Entrance Staple Gardner Bender PCC Low Voltage Clip-On Cable Staple
Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world-class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and Do-It-Yourselfers myriad packaging options, ergonomic designs and wire ranges. Attach large diameter cable to wood surfaces with the Gardner Bender 1-3/8 in x 13/16 in steel service entrance cable staples for #6/3 SEU cable 10 pack. These staples feature offset legs to prevent wood splitting and a diamond head for easy hammering. These low-voltage coaxial cable staples feature UV-resistant polyethylene saddles able to withstand both indoor and outdoor applications. Zinc-plated nails resist rust and corrosion and feature a sharp tip for easy starting and to reduce cracking and splintering of wood during installation. One nail per staple facilitates a quick hammer installation. Designed to secure cable of 1/4 in Dia or less including CAT6 or RG type cables CAT 6, RG-6/U, RG-62A, RG-62/U to wood.
Calterm 49305 Electrical Tape 30 ft L x 7.5 mil T Gardner Bender PCS-1600T Low Voltage Masonry Staple Gardner Bender PPC-1525 1-Hole Cable Clamp
Calterm offers a broad selection of professional-grade adhesive tape, including different grades of electric tapes, sealant tapes for a complete assortment and various colors to support your application. Adhesive tape acts as a superior solution for sealing and insulating splices, terminals and electrical connections in indoor and outdoor applications. The assortments of electrical tape designed for general-purpose electrical applications and made from low-lead PVC material. The 1/4 in black polyethylene clip-on coaxial masonry staples 25-pack feature UV-resistant polyethylene saddles that are suitable for indoor and outdoor applications. These staples are ideal for securing RG-59 and RG-6 coaxial cables into cement block and masonry and include hardened nails that can penetrate cement block, mortar or plaster surfaces. Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/4 in (6 mm) Dia.
CABLE TIE 4IN 18LB 100PC CLEAR CABLE TIE 4IN 18LB 100PC BLACK WireGard 19-AWC Assortment Wire Connector Kit
ProSource Cable Ties are ideal for fastening, bundling or holding together wires, cords, cables or a variety of other items. Meets flammability classification UL 94V-2. ProSource Cable Ties are ideal for fastening, bundling or holding together wires, cords, cables or a variety of other items. Meets flammability classification UL 94V-2. Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB wire connectors offer world class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and do it yourselfers myriad packaging options, ergonomic designs and wire ranges. They are designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements.
WireGard 19-001 Twist-On Wire Connector WireGard 19-002 Twist-On Wire Connector WireGard 19-003 Twist-On Wire Connector
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection. WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection. WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
WireGard 19-004 Twist-On Wire Connector WireGard 19-006 Twist-On Wire Connector WingGard 19-084 Twist-On Wire Connector
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection. WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection. GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
WingGard 19-086 Twist-On Wire Connector Hex-Lok 19-2H2 Hex Lock Wire Connector WingGard 19-089 Twist-On Wire Connector
GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force. These multi-range hex head connectors cover 95% of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a hex tool to install - you can't over-torque this connector because it's patented hex-head design strips out at UL torque saving the wires and your fingers. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires. GB's WingGard? twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
GreenGard 19-095 Grounding Wire Connector Gardner Bender PSW Low Voltage Cable Staple Gardner Bender PSB Cable Staple
Specifically designed for making positive ground connections with a hole in the tip of the connector to feed ground wire through. GreenGard connectors feature the same live-action as GB WingGard connectors with knurled wings for a sure grip and greater twisting leverage/torque. In addition GreenGard connectors offer added plating protection for corrosion resistance in grounding applications. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires. The Gardner Bender 3/16 in white polyethylene low-volt staples secure bell, speaker, thermostat and telephone wire. These staples feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration. The zinc-plated nails resist rust and corrosion, making this staple ideal for both indoor and outdoor applications and with only one nail per staple installation is quick and easy. The 3/16 in black polyethylene low-volt staples 25-pack feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration for indoor and outdoor use and are suitable for securing speaker, telephone, bell and other low-volt wires.
Gardner Bender MSI-1525T Insulated Cable Staple Gardner Bender MS-1575T Cable Staple Gardner Bender PPC-1538 1-Hole Cable Clamp
Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer sharp, burr-free tips which easily bite into wood upon hammering and deter wood from splitting. Do not drive the staple beyond the insulation stops to achieve a clean insertion and secure wiring without damage to cable or wood. 1/2 in staples secure 2 conductor NO 12 and NO 14 non-metallic BX, MC, AC and UF cable. The Gardner Bender 9/16 in graphite metal staples 18-pack feature durable metal construction with a graphite metallic finish. These staples are ideal for securing non-metallic cable and can be drive in with a hammer. The recessed heads help protect your cable and the sharp tips help the staples start easily. Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/8 in (10 mm) Dia.
Gardner Bender PPC-1550 1-Hole Cable Clamp CABLE TIE 4IN 18LB 100PC ASST Intertape 85832 Electrical Tape
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/2 in (13 mm) Dia. ProSource Cable Ties are ideal for fastening, bundling or holding together wires, cords, cables or a variety of other items. Meets flammability classification UL 94V-2. For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.
Intertape 85831 Electrical Tape Intertape 85828 Electrical Tape Intertape 85827 Electrical Tape
For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified. For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified. For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.
Intertape 85835 Electrical Tape Intertape 85830 Electrical Tape Intertape 602 Electrical Tape
PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil. thick. UL listed and CSA Certified. For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified. General-purpose electrical insulating tape, good dielectric strength. 7 mils thick. UL listed and CSA certified.
Gardner Bender PPC-1575 1-Hole Cable Clamp Gardner Bender PPC-1600 1-Hole Cable Clamp Gardner Bender HST-AST Thin Wall Heat Shrink Tubing Assortment
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/4 in (19 mm) Dia. Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1 in (2.54 cm) Dia. The Gardner Bender 26-piece heat shrink tubing assortment is ideal for insulating electrical wire, repairing appliance cords and covering tool handles. This tubing comes in 4 in lengths and offers resistance to moisture, solvent and flame damage.
Gardner Bender MS-1550T Cable Staple Gardner Bender PS-1550T Insulated Cable Staple Gardner Bender PS-1575T2 Insulated Cable Staple
The Gardner Bender 1/2 in graphite metal staples 24-pack are ideal for securing non-metallic cable. These staples feature durable metal construction with a graphite metallic finish. The recessed heads help protect your cable and the sharp tips offer an easy start. These staples can be driven in with a hammer. Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable. These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
ProSource CV280-253L Cable Tie ProSource CV280W-253L Cable Tie Gardner Bender PPC-1575UVB 1-Hole Cable Clamp
For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2. For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2. Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/4 in (19 mm) Dia.
Gardner Bender 20-2218 Tap Splice GB-Gardner Bender 21-1055 Ring Terminals GB-Gardner Bender HST-187R Heat Shrink Tubes
For snap-in splicing of low-voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell. Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
GB-Gardner Bender HST-375R Heat Shrink Tubes GB-Gardner Bender HST-500R Heat Shrink Tubes GB-Gardner Bender HST-187W Heat Shrink Tubes
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
GB-Gardner Bender HST-375W Heat Shrink Tubes GB-Gardner Bender HST-500W Heat Shrink Tubes Gardner Bender MSB Insulated Low Voltage Cable Staple
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L. Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
Gardner Bender MSW Insulated Cable Staple Gardner Bender 45-312UVB Double Lock Standard Cable Tie Gardner Bender PPC-1538UVB 1-Hole Cable Clamp
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable. Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening. Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/8 in (10 mm) Dia.
Jandorf 61453 Cable Clamp Jandorf 61454 Cable Clamp Jandorf 61455 Cable Clamp
Secures cable, tubing and wires. Secures cable, tubing and wires. Secures cable, tubing and wires.
Jandorf 61457 Cable Clamp Jandorf 61461 Cable Clamp Jandorf 61464 Cable Clamp
Secures cable, tubing and wires. Secures cable, tubing and wires. Secures cable, tubing and wires.
Jandorf 61466 Cable Clamp Jandorf 61467 Cable Clamp Jandorf 61469 Cable Clamp
Secures cable, tubing and wires. Secures cable, tubing and wires. Secures cable, tubing and wires.
Jandorf 61471 Cable Clamp Jandorf 61472 Cable Clamp GB PPR-1500 Insulated Clamp
Secures cable, tubing and wires. Secures cable, tubing and wires. GB Insulated Clamp, 3/8 in Diameter Maximum Bundle, Rubber/Steel, Black
Gardner Bender PPC-1525UVB 1-Hole Cable Clamp Gardner Bender PPC-1550UVB 1-Hole Cable Clamp Gardner Bender GHG-1525 Hole Grommet
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/4 in (6 mm) Dia. Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/2 in (13 mm) Dia. This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected.
Gardner Bender GHG-1550 Hole Grommet Gardner Bender GHG-1538 Hole Grommet Scotch 4218-BA-40 Electrical Tape
This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected. This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected. Scotch? commercial-grade vinyl electrical tape 700 is a high-quality, vinyl insulating tape. it has excellent resistance to abrasion, moisture, alkalies, acids, copper corrosion and varying weather conditions. Scotch? tape 700 provides excellent mechanical protection with minimum bulk.
Gardner Bender HST-750 Thin Wall Heat Shrink Tubing GB-Gardner Bender HST-125W Heat Shrink Tubes TUBING H SHRK 3/32-3/64X3 WHT
The Gardner Bender 3/4 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
Gardner Bender MSI-50B Insulated Cable Staple Gardner Bender 45-315 Double Lock Standard Cable Tie Gardner Bender 45-308UVB Double Lock Standard Cable Tie
Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer sharp, burr-free tips which easily bite into wood upon hammering and deter wood from splitting. Do not drive the staple beyond the insulation stops to achieve a clean insertion and secure wiring without damage to cable or wood. 1/2 in staples secure 2 conductor NO 12 and NO 14 non-metallic BX, MC, AC and UF cable. Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening. Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening.
Gardner Bender 45-315UVB Double Lock Standard Cable Tie Jandorf 61447 Cable Clamp Jandorf 61449 Cable Clamp
Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening. Secures cable, tubing and wires. Secures cable, tubing and wires.
Jandorf 61450 Cable Clamp Jandorf 61452 Cable Clamp Jandorf 61456 Cable Clamp
Secures cable, tubing and wires. Secures cable, tubing and wires. Secures cable, tubing and wires.
Gardner Bender GHG-1575 Hole Grommet Jandorf 60935 Closed End Connector 22 - 18 AWG WireGard 25-001 Twist-On Wire Connector
This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected. Jandorf Connector, 22 to 18 AWG Wire, Nylon Insulation, Copper Contact, Tin Contact Coating, Clear WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
WireGard 25-002 Twist-On Wire Connector Super 33+ 195NA Electrical Tape Calterm 73438 Heat Shrink Tubing Assortment
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection. For insulating, repairing and protecting electrical wire. UL Listed. Heat shrink tubing is great for cable insulation, marking and bundling with superior mechanical, abrasion and moisture protection. Used to repair and cover torn wire insulation or to protect and insulate objects such as rope ends, plier handles or terminal connections.
Gardner Bender HST-093 Thin Wall Heat Shrink Tubing Gardner Bender HST-125 Thin Wall Heat Shrink Tubing Gardner Bender HST-187 Thin Wall Heat Shrink Tubing
Use the Gardner Bender 3/32 in. black polyolefin heat shrink tubing for cable insulation, marking and bundling. The flame-retardant polyolefin construction resists common fluids and solvents. Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords covering tool and sporting equipment handles and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. The Gardner Bender 3/16 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.
Gardner Bender HST-375 Thin Wall Heat Shrink Tubing Gardner Bender HST-500 Thin Wall Heat Shrink Tubing Gardner Bender HST-999 Thin Wall Heat Shrink Tubing
The Gardner Bender 1/2 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. The Gardner Bender 1/2 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. This thin-wall, polyolefin heat shrink tubing is great for cable insulation, marking and bundling with superior mechanical, abrasion and moisture protection.
Gardner Bender GSE-15410 Service Entrance Staple GUN STPL LOW 5/32IN STAPLES LW VOLT GUN 1/4IN
The Gardner Bender 2-7/16 in x 1-1/16 in steel staples for 4/3 and 2/3 service entrance cable 10 pack install cable easily onto wood surfaces. These staples offer sharp offset legs that resist splitting wood and feature a burr-free construction. Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. These Gardner Bender staples feature durable metal construction. The staples exhibits a silver metallic finish and are 5/32 in W. These staples are meant for use with the Gardner Bender low voltage staple gun model #MSG-301 (not included). Staples cover a wide range of wire applications. Easy to load, easy to install. Staples feature durable metal construction with a silver metallic finish and are 1/4 in (6 mm) W. Designed for use with the Gardner Bender low voltage staple gun model #MSG-301 (not included) these staples cover a wide range of applications including securing television, CAT 5E, CAT 6 and RG-59 and computer cables. Quick to load, easy to install, these staples get the job done! Staple is also available in 5/32 in (4 mm) size under Model# MMS-3112 which covers telephone, alarm, security, doorbell, thermostat and speaker cable/wire.
Gardner Bender MS Cable Staple Gardner Bender 45-312 Double Lock Standard Cable Tie Jandorf 61446 Cable Clamp
The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA. Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening. Secures cable, tubing and wires.
Jandorf 61448 Cable Clamp Jandorf 61451 Cable Clamp Jandorf 61458 Cable Clamp
Secures cable, tubing and wires. Secures cable, tubing and wires. Secures cable, tubing and wires.
Jandorf 61459 Cable Clamp Jandorf 61460 Cable Clamp Jandorf 61462 Cable Clamp
Secures cable, tubing and wires. Secures cable, tubing and wires. Secures cable, tubing and wires.
Jandorf 61463 Cable Clamp Jandorf 61468 Cable Clamp Jandorf 61524 Grommet
Secures cable, tubing and wires. Secures cable, tubing and wires. For fans, electrical uses. Black.
Hex-Lok 19-1H1 Hex Lock Wire Connector Gardner Bender GTF-300 Friction Tape Jandorf 60861 Closed End Connector 16 - 14 AWG
These multi-range hex head connectors cover 95% of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a hex tool to install, you can't over-torque this connector because it's patented hex-head design strips out at UL torque saving the wires and your fingers. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires. Black friction tape with a matted finish that provides the best gripping surface available. Use over electrical splices, wrapping grips or sporting goods. Jandorf Connector, 16 to 14 AWG Wire, Nylon Insulation, Copper Contact, Tin Contact Coating, Clear
Jandorf 60905 Ring Terminal Jandorf 60906 Ring Terminal Jandorf 60931 Butt Splice Terminal
Jandorf Ring Terminal, 16 to 14 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #6 Stud, Blue Jandorf Ring Terminal, 16 to 14 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #8 Stud, Blue Jandorf Butt Splice Connector, 22 to 18 AWG Wire, Copper Contact, Tin Contact Coating
Jandorf 60934 Butt Splice Terminal Jandorf 60967 Ring Terminal Jandorf 60968 Ring Terminal
Insulated, for electrical splices. UL Listed. Jandorf Ring Terminal, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #6 Jandorf Ring Terminal, 22 to 18 AWG Wire, Copper Contact, Tin Contact Coating, #8 Stud
Jandorf 60969 Ring Terminal Jandorf 60972 Ring Terminal Jandorf 60973 Ring Terminal
Jandorf Ring Terminal, 22 to 18 AWG Wire, Copper Contact, Tin Contact Coating, #10 Stud Jandorf Ring Terminal, 22 to 18 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #6 Stud, Red Jandorf Ring Terminal, 22 to 18 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #8 Stud, Red
Jandorf 60977 Locking Spade Terminal Jandorf 60978 Spade Terminal Jandorf 60979 Locking Spade Terminal
Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #6 Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #6 Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #8
Jandorf 60980 Spade Terminal Jandorf 60981 Locking Spade Terminal Jandorf 60982 Spade Terminal
Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #8 Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #10 Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #10
Jandorf 60985 Spade Terminal Jandorf 60986 Locking Spade Terminal Jandorf 60987 Spade Terminal
Jandorf Spade Terminal, 600 V, 22 to 18 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #6 Stud, Red Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #8, Red Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #8, Red
Calterm 73457 Flexible Tube Gardner Bender PSB Low Voltage Cable Staple Gardner Bender PS-50 Insulated Cable Staple
When wires become entangled they are safety hazards, for both the equipment and the owner. Calterm offers a variety of products for protections and neatness. As the needs of professional electricians change in managing wire and cable, Calterm continues to deliver innovative solutions. Flex tubing protects hoses, wire and cables from cuts, abrasions and UV wear. The 1/4 in black polyethylene coaxial staples 25-pack feature polyethylene saddles for durability and UV resistance. These staples are ideal for securing RG-59 and RG-6 coaxial cables and include zinc-plated nails that can be driven in with a hammer for quick and easy installation. 1 nail per staple for quick and easy installation. For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
Gardner Bender MS-1555 Cable Staple Gardner Bender PSW-1650T Cable Staple GB PTP-25T Category 3 and 5 Low Voltage Data Staple
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable. Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable. The Gardner Bender 1/4 in white polyethylene coaxial staples 25-pack feature polyethylene saddles for durability and UV resistance. These staples are an excellent choice for securing RG-59 and RG-6 coaxial cables and include zinc-plated nails that can be driven in with a hammer. Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
Gardner Bender 45-308 Double Lock Standard Cable Tie Jandorf 61502 Grommet Jandorf 61507 Grommet
Gardner? Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into the tie head while close serrations on both sides of the tie promote precise adjustment. The smooth radiused edges ensure easy "slip" as you tighten while finger grips on the end ensure a secure and comfortable grip when hand tightening. For fans, electrical uses. Black. For fans, electrical uses. Black.
Jandorf 61512 Grommet Gardner Bender 20-089 Closed End Crimp Pigtail Connector Gardner Bender 20-090 Closed End Crimp Pigtail Connector
For fans, electrical uses. Black. Closed end connectors are ideal for making a simple connection of two or more wires to create a pigtail connection. The pigtail connector is a closed end, crimp on wire connector used to secure electrical connection points. The proper installation method is to connect the wires together first and then add a pigtail connector and crimp tight to provide a safe, secure and stable connection particularly in applications subject to vibration. Designed to be used with both solid and stranded wire these closed end connectors feature a tin-plated seamless copper sleeve with translucent nylon insulation. Connector rated for #22 to #14 AWG applications up to 300 V with a minimum 2 to #22 and maximum 1 #14 w/1 #18. Closed end connectors are ideal for making a simple connection of two or more wires to create a pigtail connection. The pigtail connector is a closed end, crimp on wire connector used to secure electrical connection points. The proper installation method is to connect the wires together first and then add a pigtail connector and crimp tight to provide a safe, secure and stable connection particularly in applications subject to vibration. Designed to be used with both solid and stranded wire these closed end connectors feature a tin-plated seamless copper sleeve with translucent nylon insulation. Connector rated for #22 to #10 AWG applications up to 300 V.
WireGard 25-003 Twist-On Wire Connector Gardner Bender 20-411 Crimp Sleeve Connector Gardner Bender 20-126 Crimp Butt Splice
WireGard? twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard? connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection. Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable. For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed.
Gardner Bender 20-114 Crimp Spade Terminal Gardner Bender 20-104 Crimp Ring Terminal Gardner Bender 20-163P Fully Insulated Paired Bullet Splice Set
The Gardner Bender vinyl-insulated spade terminals provide dependable protection from high temperature and electric shock. Color-coded insulation for easy identification. Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed. Rated at 600 V maximum, 167 deg F. UL listed.
Gardner Bender 20-143M Wire Disconnect Gardner Bender 20-108 Crimp Ring Terminal Gardner Bender 20-116 Crimp Spade Terminal
Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating. Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed. Vinyl insulated copper. Rated at 600 V maximum. Temperature rating of 167 deg F. UL Listed.
Jandorf 60860 Butt Splice Terminal Jandorf 60870 Disconnect Terminal Jandorf 60871 Disconnect Terminal
Insulated, for electrical splices. UL Listed. Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin
Jandorf 60873 Disconnect Terminal Jandorf 60874 Disconnect Terminal Jandorf 60900 Ring Terminal
Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin Jandorf Ring Terminal, 16 to 14 AWG Wire, Copper Contact, Tin Contact Coating, #8 Stud
Jandorf 60901 Ring Terminal Jandorf 60907 Ring Terminal Jandorf 60910 Locking Spade Terminal
Jandorf Ring Terminal, 16 to 14 AWG Wire, Copper Contact, Tin Contact Coating, #10 Stud Jandorf Ring Terminal, 16 to 14 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #10 Stud, Blue Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #6
Jandorf 60911 Spade Terminal Jandorf 60912 Locking Spade Terminal Jandorf 60913 Spade Terminal
Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #6 Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #8 Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #8
Jandorf 60914 Locking Spade Terminal Jandorf 60915 Spade Terminal Jandorf 60918 Spade Terminal
Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #10 Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin, Stud Size: #10 Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #6, Blue
Jandorf 60919 Locking Spade Terminal Jandorf 60920 Spade Terminal Jandorf 60966 Ring Terminal
Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #8, Blue Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #8, Blue Jandorf Ring Terminal, 16 to 14 AWG Wire, Copper Contact, Tin Contact Coating, #6 Stud
Jandorf 60974 Ring Terminal Jandorf 60989 Spade Terminal Gardner Bender 20-105 Crimp Ring Terminal
Jandorf Ring Terminal, 22 to 18 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #10 Stud, Red Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #10, Red Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
Gardner Bender 20-111 Crimp Spade Terminal Gardner Bender 20-145F Wire Disconnect Gardner Bender 20-153P Fully Insulated Paired Disconnect
These terminals are constructed with heat shrink insulation adhesive lines to waterproof and environmentally seal electrical connections when crimped and heated. Quick and reliable crimp-type wire connections. Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating. Nylon fully insulated, rated at 600 V. 0.250 in x 0.032 in tab. 105 deg C temperature rating. Card contains male and female disconnects.
Gardner Bender 20-141F Wire Disconnect Gardner Bender 20-121 Crimp Butt Splice Gardner Bender 20-145M Wire Disconnect
Quick and reliable crimp-type wire connections. Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating. For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed. Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating.
Gardner Bender 20-161P Fully Insulated Paired Bullet Splice Set Gardner Bender 20-106 Crimp Ring Terminal Gardner Bender 20-102 Crimp Ring Terminal
Rated at 600 V maximum, 167 deg F. UL Listed. Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed. Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
Gardner Bender 20-112 Crimp Spade Terminal Gardner Bender 20-1210 Tap Splice GB-Gardner Bender 21-109 Ring Terminals
The Gardner Bender vinyl-insulated spade terminals provide dependable protection from high temperature and electric shock. Color-coded insulation for easy identification. For snap-in splicing of low-voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell. Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
Gardner Bender 20-141M Wire Disconnect Gardner Bender 20-151P Fully Insulated Paired Disconnect Gardner Bender 20-123 Crimp Butt Splice
Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating. Nylon fully insulated, rated at 600 V. 0.250 in x 0.032 in tab. 105 deg C temperature rating. Card contains male and female disconnects. For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed.
Gardner Bender 20-113 Crimp Spade Terminal Gardner Bender 20-143F Wire Disconnect Gardner Bender 20-103 Crimp Ring Terminal
These terminals are constructed with heat shrink insulation adhesive lines to waterproof and environmentally seal electrical connections when crimped and heated. Quick and reliable crimp-type wire connections. Vinyl insulated shank with 0.250 in x 0.032 in tab. 75 deg C temperature rating. Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed.
Gardner Bender 20-107 Crimp Ring Terminal Gardner Bender 73421 Spiral Wrap Gardner Bender FLX-5007 Corrugated Spilt Flexible Tube
Quick and reliable crimp-type wire connections. Vinyl insulated copper. UL Listed. Spiral wrap cord organizer, up to 3-1/2 ft or 6 cords for computers, stereos and home theaters. 3/8 in x 3-1/2 ft of black spiral wrap. Carded. Protects hoses, wire and cables from cuts, abrasions and UV wear. Corrugated for added flexibility. Split down the center for wire breakout where needed. Black.
Gardner Bender MDI Insulated High Impact Cable Staple Gardner Bender PSG Low Voltage Cable Staple Jandorf 61470 Cable Clamp
Insulated staples protect and secure NM, BX and UF. PVC insulation protects cable from damage due to mis-hit and overdriving, prevents a short circuit if wire insulation is damaged. Highly visible color coded for size and application. 40 per card. Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable. Secures cable, tubing and wires.
Jandorf 61492 Grommet Jandorf 61494 Grommet Jandorf 61501 Grommet
For fans, electrical uses. Black. For fans, electrical uses. Black. For fans, electrical uses. Black.
Jandorf 61503 Grommet Jandorf 61511 Grommet Jandorf 61521 Grommet
For fans, electrical uses. Black. For fans, electrical uses. Black. For fans, electrical uses. Black.
Jandorf 61522 Grommet Jandorf 61542 Grommet Jandorf 60820 Closed End Connector 12 - 10 AWG
For fans, electrical uses. Black. For fans, electrical uses. Black. Jandorf Connector, 12 to 10 AWG Wire, Nylon Insulation, Copper Contact, Tin Contact Coating, Clear
Gardner Bender GTA-2 Mechanical Lug Jandorf 60800 Self-Stripping Terminal Jandorf 60801 Self-Stripping Terminal
Single conductor, features high-strength, low resistance aluminum construction. Accepts wire from number 14 to number 10 ga AWG stranded and number 14 to number 2 ga AWG solid. UL Listed. 2/CD. Instantly secure connections without stripping the wires. Commonly used in low-voltage applications such as vehicle wiring and connecting a new wire to an existing wire without soldering. Insert one wire into each end and crimp. Connection is secure and stable. Instantly secure connections without stripping the wires. Commonly used in low-voltage applications such as vehicle wiring and connecting a new wire to an existing wire without soldering. Insert one wire into each end and crimp. Connection is secure and stable.
Jandorf 60857 Butt Splice Terminal Jandorf 60902 Ring Terminal Jandorf 60916 Spade Terminal
Jandorf Butt Splice Connector, 16 to 14 AWG Wire, Copper Contact, Tin Contact Coating Jandorf Ring Terminal, 16 to 14 AWG Wire, Copper Contact, Tin Contact Coating, 1/4 in Stud Jandorf Spade Terminal, 600 V, 16 to 14 AWG Wire, Copper Contact, Tin Contact Coating, 1/4 in Stud
Jandorf 60922 Spade Terminal Jandorf 60926 Bullet Terminal Jandorf 60927 Bullet Terminal
Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #10, Blue Rated at 600 V maximum. 0.157 in tab. Rated at 600 V maximum. 0.157 in tab.
Jandorf 60942 Disconnect Terminal Jandorf 60943 Disconnect Terminal Jandorf 60944 Disconnect Terminal
Jandorf Disconnect Terminal, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin Jandorf Disconnect Terminal, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin Jandorf Disconnect Terminal, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin
Jandorf 60945 Disconnect Terminal Jandorf 60970 Ring Terminal Jandorf 60971 Ring Terminal
Jandorf Disconnect Terminal, Wire Size: 22 to 18 AWG, Contact Material: Copper, Contact Coating: Tin Jandorf Ring Terminal, 22 to 18 AWG Wire, Copper Contact, Tin Contact Coating, 1/4 in Stud Jandorf Ring Terminal, 22 to 18 AWG Wire, Copper Contact, Tin Contact Coating, 3/8 in Stud
Jandorf 60975 Ring Terminal Jandorf 60983 Spade Terminal Jandorf 60984 Spade Terminal
Jandorf Ring Terminal, 22 to 18 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, 1/4 in Stud, Red Jandorf Spade Terminal, 600 V, 22 to 18 AWG Wire, Copper Contact, Tin Contact Coating, 1/4 in Stud Jandorf Spade Terminal, 600 V, 22 to 18 AWG Wire, Copper Contact, Tin Contact Coating, #6 Stud, Red
Jandorf 60988 Locking Spade Terminal Jandorf 60990 Spade Terminal Gardner Bender 20-100 Tap Splice
Jandorf Spade Terminal, 600 V, Wire Size: 22 to 18 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #10, Red Jandorf Spade Terminal, 600 V, 22 to 18 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, 1/4 in Stud, Red For snap-in splicing of low-voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell.
Calterm 73458 Flexible Tube Jandorf 61422 Cord Protector Jandorf 61423 Cord Protector
When wires become entangled they are safety hazards, for both the equipment and the owner. Calterm offers a variety of products for protections and neatness. As the needs of professional electricians change in managing wire and cable, Calterm continues to deliver innovative solutions. Jandorf Cord Protector, Flat Cable, Nylon, Black, Suitable for: 18/2 Flat Black Cross Section Wire Jandorf Cord Protector, Flat Cable, Nylon, Black, Suitable for: 18/3, 16/2 Flat Black Cross Section Wire
Jandorf 61424 Cord Protector GB-Gardner Bender HST-250R Heat Shrink Tubes GB-Gardner Bender HST-250W Heat Shrink Tubes
Jandorf Cord Protector, Flat Cable, Right-Angle, Nylon, Black, Suitable for: 18/2, 18/3, 16/2 Flat Black Cross Section Wires For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.
Erico ESBP6 Split Bolt Connectors Gardner Bender PEC-31525 Coaxial Cable Clamp Gardner Bender PS-75 Insulated Cable Staple
With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. The Gardner Bender 1/4 in coaxial cable clamp secures RG-59, RG-6 coaxial cables and others. This cable clamp includes a combo screw for safer installations and features a screw-in depth of 1/2 in. For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
Gardner Bender MS-1577 Cable Staple Gardner Bender MS Cable Staple GB-Gardner Bender 45-MB Cable Tie Mounting Bases
These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr-free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA. The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA. Mounting Bases are the ideal companion for cable ties. They allow a user to mount cable ties just about anywhere. GB's feature a 2-way fastening design where they mount either by the adhesive back or a center screw for extra holding power. Cable ties can be inserted in 4 different directions which gives greater flexibility in mounting bundles. These bases are designed to hold cables ties ranging from 18 to 75 lb of tensile strength. Made from durable nylon 6/6 and are for indoor use only.
GB-Gardner Bender 45-MBUVB Cable Tie Mounting Bases Gardner Bender 45-308MTUVB Mounting Cable Tie Jandorf 61412 Cable Clip
Mounting Bases are the ideal companion for cable ties. They allow a user to mount cable ties just about anywhere. GB's feature a 2-way fastening design where they mount either by the adhesive back or a center screw for extra holding power. Cable ties can be inserted in 4 different directions which gives greater flexibility in mounting bundles. These bases are designed to hold cables ties ranging from 18 lb to 75 lb of tensile strength. Made from durable nylon 6/6, these bases also include an ultra-violet inhibitor which protects against the suns harmful rays. These cable ties are designed with a special mounting hole at the top of the tie which enables the user to mount or hang a bundle from just about anywhere. The hole accepts a #10 screw. Mounting ties are great for securing bundles of cables to studs, walls, ceilings or other surfaces. Also hang cords, tools and countless other applications with these great cable ties. Jandorf Cable Clip, Clamping Range: 3/8 in, Nylon, Natural
Jandorf 61443 Insulated Conduit Bushing Jandorf 61445 Insulated Conduit Bushing All Fit 61401 Insulated Conduit Bushing
Insulated, indoor and outdoor. Push to connect. Insulated, indoor and outdoor. Push to connect. Jandorf Conduit Bushing, 13/16 in Diameter Cable, Nylon, Black, 0.453 in Panel Thickness, 1-3/32 in Panel Hole Diameter, Suitable for: PVC Material
All Fit 61402 Insulated Conduit Bushing All Fit 61403 Insulated Conduit Bushing Jandorf 61495 Grommet
Jandorf Conduit Bushing, 3/4 in Diameter Cable, Nylon, Black, 0.453 in Panel Thickness, 1 in Panel Hole Diameter, Suitable for: PVC Material Jandorf Conduit Bushing, 9/16 in Diameter Cable, Nylon, Black, 0.453 in Panel Thickness, 7/8 in Panel Hole Diameter, Suitable for: PVC Material For fans, electrical uses. Black.
Jandorf 61496 Grommet Jandorf 61497 Grommet Jandorf 61498 Grommet
For fans, electrical uses. Black. For fans, electrical uses. Black. For fans, electrical uses. Black.
Jandorf 61500 Grommet Jandorf 61504 Grommet Jandorf 61508 Grommet
For fans, electrical uses. Black. For fans, electrical uses. Black. For fans, electrical uses. Black.
Jandorf 61509 Grommet Jandorf 61510 Grommet Jandorf 61519 Grommet
For fans, electrical uses. Black. For fans, electrical uses. Black. For fans, electrical uses. Black.
CABLE TIE 5.7IN 40LB 100PC CLR CABLE TIE 5.7IN 40LB 100PC BLK Super 33+ 200 Electrical Tape
ProSource Cable Ties are ideal for fastening, bundling or holding together wires, cords, cables or a variety of other items. Meets flammability classification UL 94V-2. ProSource Cable Ties are ideal for fastening, bundling or holding together wires, cords, cables or a variety of other items. Meets flammability classification UL 94V-2. Vinyl electrical tape, black, 7 mil thick with PVC backing, provides protective jacketing for high-voltage cables and wire harnesses and primary electrical insulation for splices up to 600 V. Abrasion, corrosion and UV-resistant, resists alkalis and acids and is flame-retardant. All-weather performance in cold to 0 deg F or heat to 220 deg F. UL listed and CSA Certified.
Jandorf 60803 Tap Splices Jandorf 60804 Self-Stripping Terminal Jandorf 60824 Disconnect Terminal
Instantly secure connections without stripping the wires. Commonly used in low-voltage applications such as vehicle wiring and connecting a new wire to an existing wire without soldering. Insert one wire into each end and crimp. Connection is secure and stable. Instantly secure connections without stripping the wires. Commonly used in low-voltage applications such as vehicle wiring and connecting a new wire to an existing wire without soldering. Insert one wire into each end and crimp. Connection is secure and stable. Jandorf Disconnect Terminal, Wire Size: 12 to 10 AWG, Contact Material: Copper, Contact Coating: Tin
Jandorf 60825 Disconnect Terminal Jandorf 60826 Disconnect Terminal Jandorf 60827 Disconnect Terminal
Jandorf Disconnect Terminal, Wire Size: 12 to 10 AWG, Contact Material: Copper, Contact Coating: Tin Jandorf Disconnect Terminal, 12 to 10 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating Jandorf Disconnect Terminal, 12 to 10 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, Yellow
Jandorf 60832 Ring Terminal Jandorf 60833 Ring Terminal Jandorf 60840 Ring Terminal
Jandorf Ring Terminal, 12 to 10 AWG Wire, Copper Contact, Tin Contact Coating, #6 Stud Jandorf Ring Terminal, 12 to 10 AWG Wire, Copper Contact, Tin Contact Coating, #8 Stud Jandorf Ring Terminal, 12 to 10 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #6 Stud, Yellow
Jandorf 60842 Spade Terminal Jandorf 60843 Spade Terminal Jandorf 60846 Spade Terminal
Jandorf Spade Terminal, 600 V, 12 to 10 AWG Wire, Copper Contact, Tin Contact Coating, #6 Stud Jandorf Spade Terminal, 600 V, 12 to 10 AWG Wire, Copper Contact, Tin Contact Coating, #8 Stud Jandorf Spade Terminal, 600 V, 12 to 10 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #6 Stud, Yellow
Jandorf 60851 Bullet Terminal Jandorf 60852 Bullet Terminal Jandorf 60872 Disconnect Terminal
Rated at 600 V maximum. 5/32 in tab. Rated at 600 V maximum. 5/32 in tab. Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Blue
Jandorf 60876 Disconnect Terminal Jandorf 60877 Disconnect Terminal Jandorf 60878 Disconnect Terminal
Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin
Jandorf 60879 Disconnect Terminal Jandorf 60880 Piggy Back Disconnect Terminal Jandorf 60883 Right Angle Flag Disconnect Terminal
Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Blue Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Blue Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin
Jandorf 60884 Disconnect Terminal Jandorf 60891 Hook Terminal Jandorf 60892 Hook Terminal
Jandorf Disconnect Terminal, Wire Size: 16 to 14 AWG, Contact Material: Copper, Contact Coating: Tin Jandorf Hook Terminal, 16 to 14 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #6 Stud, Blue Jandorf Hook Terminal, 16 to 14 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #8 Stud, Blue
Jandorf 60893 Hook Terminal Jandorf 60903 Ring Terminal Jandorf 60904 Ring Terminal
Jandorf Hook Terminal, 16 to 14 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, #10 Stud, Blue Jandorf Ring Terminal, 16 to 14 AWG Wire, Copper Contact, Tin Contact Coating, 3/8 in Stud Jandorf Ring Terminal, 16 to 14 AWG Wire, Copper Contact, Tin Contact Coating, 5/16 in Stud
Jandorf 60908 Ring Terminal Jandorf 60917 Locking Spade Terminal Jandorf 60921 Locking Spade Terminal
Jandorf Ring Terminal, 16 to 14 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, 1/4 in Stud, Blue Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #6, Blue Jandorf Spade Terminal, 600 V, Wire Size: 16 to 14 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Stud Size: #10, Blue
Jandorf 60923 Spade Terminal Jandorf 60947 Disconnect Terminal Jandorf 60948 Disconnect Terminal
Jandorf Spade Terminal, 600 V, 16 to 14 AWG Wire, Vinyl Insulation, Copper Contact, Tin Contact Coating, 1/4 in Stud, Blue Jandorf Disconnect Terminal, Wire Size: 22 to 18 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Red Jandorf Disconnect Terminal, Wire Size: 22 to 18 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Red
Jandorf 60949 Piggy Back Disconnect Terminal Jandorf 60951 Spade Terminal Jandorf 60952 Spade Terminal
Jandorf Disconnect Terminal, Wire Size: 22 to 18 AWG, Insulation Material: Vinyl, Contact Material: Copper, Contact Coating: Tin, Red Jandorf Spade Terminal, 22 to 18 AWG Wire, Copper Contact, Tin Contact Coating, #6 Stud Jandorf Spade Terminal, 22 to 18 AWG Wire, Copper Contact, Tin Contact Coating, #8 Stud
   
 
1 2 3 4