Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS
Choose a sub category:
CPVC FITTINGS PVC - PRESSURE FITTINGS PVC SCH 80 PRESSURE FITTINGS
PVC - DWV FITTINGS PVC - S&D FITTINGS HDPE - S&D FITTINGS
STYRENE - S&D FITTINGS ABS - DWV FITTINGS BRASS INSERT FITTINGS
BRONZE INSERT FITTINGS STEEL INSERT FITTINGS POLY INSERT FITTINGS
NYLON INSERT FITTINGS NYLON PIPE & HOSE FITTINGS PUSH FIT FITTINGS
FLAIR IT FITTINGS PEX CRIMP INSERT FITTINGS PEX EXPANSION INSERT FITTINGS
CORRUGATED SNAP FITTINGS DRAIN PIPE SLEEVES/ACCESSORIES IRON PIPE FITTINGS- GALVANIZED
STEEL PIPE FITTINGS-GALVANIZED IRON PIPE FITTINGS-BLACK STEEL PIPE FITTINGS- BLACK
COPPER FITTINGS BRASS FLARE FITTINGS GAS LINE FITTINGS
WATER SERVICE FITTINGS BRASS COMPRESSION FITTINGS BRASS PIPE FITTINGS
CHROME PLATED/RB FITTINGS CLEANOUT PLUGS YARD DRAINS & BASINS
Sort By:
1 2 3
Genova Products 50105 CPVC Coupling Epc 50155 Tube Cap Genova Products 50107 CPVC Coupling
NIBCO Pipe Coupling, Nominal Size: 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC NIBCO Pipe Cap, Nominal Size: 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC NIBCO Pipe Coupling, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
Genova Products 50705 CPVC 90 Degree Elbow Genova 52905 CPVC Fitting Genova Products 50405 CPVC Male Adapter
NIBCO Pipe Elbow, Nominal Size: 1/2 in, Female x Solvent Weld Connection, Angle: 90 deg, 140 psi, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC NIBCO Street Pipe Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC The NIBCO? CPVC-CTS male adapter is made of FlowGuard Gold? CPVC and is ideally suited for hot and cold water pressure distribution systems in residential and commercial applications. The CPVC-CTS male adapter features a female socket x male NPT threaded connection and provides a means for adapting a solvent weld connection to a threaded connection. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading. NIBCO? plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Genova Products 50605 CPVC 45 Degree Elbow Epc 500 Tube Cap Genova 500 Pipe Reducing Bushing
NIBCO Pipe Elbow, Nominal Size: 1/2 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC NIBCO Pipe Cap, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC NIBCO Pipe Bushing, Nominal Size: 3/4 x 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
Genova Products 50175 CPVC Coupling Genova Products 51405 CPVC Tee Genova Products 50407 CPVC Male Adapter
NIBCO Pipe Coupling, Nominal Size: 3/4 x 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC NIBCO Pipe Tee, Nominal Size: 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC The NIBCO? CPVC-CTS male adapter is made of FlowGuard Gold? CPVC and is ideally suited for hot and cold water pressure distribution systems in residential and commercial applications. The CPVC-CTS male adapter features a female socket x male NPT threaded connection and provides a means for adapting a solvent weld connection to a threaded connection. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading. NIBCO? plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
ELBOW 90DEG CPVC 3/4          Genova 50607 CPVC Fittings Genova 52907 CPVC Fitting
NIBCO Pipe Elbow, Nominal Size: 3/4 in, Slip Connection, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC NIBCO Pipe Elbow, Nominal Size: 3/4 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC NIBCO Street Pipe Elbow, Nominal Size: 3/4 in, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
Pro Bite 636-004HC/PB721R Push Fit Demount Clip Pro Bite 636-003HC/PB711R Push Fit Demount Clip Genova 53056 CPVC Fitting
The ProBite disconnect tool is used for quick and easy fitting removal in all plumbing applications. The ProBite disconnect tool is available in all standard fitting sizes to ensure a quick and proper fitting removal every time. The ProBite disconnect tool is used for quick and easy fitting removal in all plumbing applications. The ProBite? disconnect tool is available in all standard fitting sizes to ensure a quick and proper fitting removal every time. NIBCO Drop Ear Pipe Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC
Genova 52705 CPVC Fittings Genova Products 51407 CPVC Tee Epc 50158 Tube Cap
NIBCO Street Pipe Elbow, Nominal Size: 1/2 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC NIBCO Pipe Tee, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC NIBCO Pipe Cap, Nominal Size: 1 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
Genova 52707 CPVC Fittings Genova Products 51471 CPVC Tee Genova 51473 CPVC Fittings
NIBCO Street Pipe Elbow, Nominal Size: 3/4 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC NIBCO Pipe Tee, Nominal Size: 3/4 x 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC NIBCO Pipe Tee, Nominal Size: 3/4 x 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
Genova 51477 CPVC Fittings Apollo Valves APXP12 Pex Crimp Test Plug Genova 50110 CPVC Fitting
NIBCO Pipe Tee, Nominal Size: 1 x 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC Apollo Valves Test Pipe Plug, Nominal Size: 1/2 in, Barb Connection, Suitable for: PEX Pipe NIBCO Pipe Coupling, Nominal Size: 1 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
Genova Products 53055 CPVC Wing Elbow Genova 500 Pipe Reducing Bushing Genova Products 50305 CPVC Female Adapter
NIBCO Drop Ear Pipe Elbow, Nominal Size: 1/2 in, FIP Connection, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC NIBCO Pipe Bushing, Nominal Size: 1 x 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC NIBCO Pipe Adapter, Nominal Size: 1/2 in, Slip x FIP Connection, CPVC
Conbraco APXC3838 Apollo Genova 500 Solvent Weld Joints Pipe Union With Metal Bracket Cash Acme U714A Disconnect Clip
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings. This union solvent welds directly to CPVC pipe and provides a method for future disassembly of piping without cutting. Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
Cash Acme U710A Disconnect Clip Cash Acme U712A Disconnect Clip Legend 313-404 Water Service Fitting
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in. Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in. Legend Insert Stiffener, Nominal Size: 3/4 in, Stainless Steel
Genova 51577 Pipe to Tube Coupling Cash Acme U706A Disconnect Clip Cash Acme U708A Disconnect Clip
NIBCO Pipe Coupling, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in. Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
Flair-It 16841 Flair-It Pex Polybutylene Adapter PEX PLUG BLACK 3/8IN          Conbraco APXC1212 Apollo
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent Pending. Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
Conbraco APXC1238 Apollo Conbraco APXC1234 Apollo Apollo Valves APXMS1212 Pipe Adapter
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings. Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings. Apollo Valves Pipe Adapter, Nominal Size: 1/2 in, PEX x Male Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
Genova 50610 CPVC Fitting Genova Products 50307 CPVC Female Adapter Flair-It 16842 Flair-It
NIBCO Pipe Elbow, Nominal Size: 1 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC NIBCO Pipe Adapter, Nominal Size: 3/4 in, Slip x FIP Connection, CPVC Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
PEX PLUG BLACK 1/2IN          Conbraco APXE12 Tube Elbow Legend 313-405 Water Service Fitting
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent Pending. Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately. Legend Insert Stiffener, Nominal Size: 1 in, Stainless Steel
Apollo Valves APXP34 Pex Crimp Test Plug FITTING PIPE CONNECTOR UNIVERS Hancor FCE0B030000 External Single Wall Drain End Cap 3 in W
Apollo Valves Test Pipe Plug, Nominal Size: 3/4 in, Barb Connection, Suitable for: PEX Pipe Features inner dimensions that connects to 3 in pipe and an outer dimension that connects to 4 in pipe. The most economical solution for connecting Flex-Drain 3 in and 4 in. Corrugated pipe and 4 in. PVC. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC or metal. CSA approved.
Genova 50710 CPVC Fittings Flair-It 16860 Tube Cap Conbraco APXBC1212 Apollo
NIBCO Pipe Elbow, Nominal Size: 1 in, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC Used for capping off PEX fittings. Bar coded. Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
Conbraco APXC3434 Apollo Apollo Valves APXFS1212 Pipe Adapter ELBOW BRASS 1/2PEX
Apollo Valves Pipe Adapter, Nominal Size: 1/2 in, PEX x Female Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes The SharkBite? PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
Apollo Valves APXMA1212 Pipe Adapter Apollo Valves APXT38 Crimp Tube Tee Apollo Valves APXT12 Crimp Tube Tee
Apollo Valves Pipe Adapter, Nominal Size: 1/2 in, PEX x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes Apollo Valves Tube Tee, Nominal Size: 3/8 in, Suitable for: Apollo PEX Pipe Apollo Valves Tube Tee, Nominal Size: 1/2 in, Suitable for: Apollo PEX Pipe
FITTING DRAIN FLEX COUPLER 4IN Elkhart CopperLoc Push-Fit Tube Adapter PEX ELBOW BLACK 3/8IN
For joining two cut pieces of flex-drain (not included), Use to adapt flex-drain to wyes and tees to help provide good fit and function. Adapts flex-drain to end caps and pop-up emitters (caps and emitters not included). Female connections. Minimum working temperature of -50 deg F and a maximum working temperature of 150 deg F. Maximum working pressure of 70 psi, Polypropylene construction, Rated for soil drain and underground use. The CopperLoc? 904 non-removable push female adapter features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc? products are manufactured utilizing proven ASTM materials and standards. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX PLUG BLACK 3/4IN          Conbraco APXBC3434 Apollo Conbraco APXE1234 Tube Elbow
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent Pending. Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings. Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately.
Apollo Valves APXFB1212S Swivel Pipe Adapter Legend 313-414 Water Service Fitting Genova 50410 CPVC Fittings
Apollo Valves Pipe Adapter, Nominal Size: 1/2 in, PEX x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes Legend Insert Stiffener, Nominal Size: 3/4 in, Stainless Steel NIBCO Pipe Adapter, Nominal Size: 1 in, Slip x MIP Connection, CPVC
Anderson 03610 Pipe Reducing Hex Bushing Pro Bite 633-003HC/LF816R End Cap Elkhart CopperLoc Push-Fit Tube Adapter
Anderson Metals Reducing Pipe Bushing, Nominal Size: 1-1/2 x 1-1/4 in, Male x Female Thread Connection, 150 psi, Operating Temperature: 120 deg F ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more. The CopperLoc? 903 non-removable push female adapter features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc? products are manufactured utilizing proven ASTM materials and standards.
CLIP DISCONNECT W/GAUGE 1/2PVC CLIP DISCONNECT W/GAUGE 3/4PVC CLIP DISCONNECT W/GAUGE 1 PVC
Need to make a change to an installed SharkBite? PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite? PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in. Need to make a change to an installed SharkBite? PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite? PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in. Need to make a change to an installed SharkBite? PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite? PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in.
Flair-It 16859 Tube Cap COUPLING PEX 1/2X3/4 IN       PEX COUPLING BLACK 1/2IN
Used for capping off PEX fittings. Bar coded. The SharkBite? PEX barb coupling is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well. Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings.
PEX COUPLING REDUCNG 1/2X3/8IN Conbraco APXE3434 Tube Elbow Apollo Valves APXMS3434 Pipe Adapter
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately. Apollo Valves Pipe Adapter, Nominal Size: 3/4 in, PEX x Male Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
Flair-It 16855 Flair-It Pex Polybutylene Coupling Flair-It 16812 Flair-It Flair-It 16872 Flair-It Pex Polybutylene Adapter 3/4Comp x 3/4 MPT BSP
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional. For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded. Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
PEX COUPLING BLACK 3/8IN      Conbraco APXC341 Apollo Apollo Valves APXFA3434 Pipe Adapter
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings. Apollo Valves Pipe Adapter, Nominal Size: 3/4 in, PEX x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
Apollo Valves APXFS3434 Pipe Adapter Draintech 0440SDG Round Drain Grate Legend 313-406 Water Service Fitting
Apollo Valves Pipe Adapter, Nominal Size: 3/4 in, PEX x Female Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes Use with pipe and connecting fittings where a drain basin is not needed or where space doesn't allow the use of a basin. Use with corrugated single wall pipe, triple-wall pipe, leach pipe or PVC pipe. ADA compliant. Dual wall, SDR 35, 2729 S&D. Legend Insert Stiffener, Nominal Size: 1-1/4 in, Stainless Steel
Apollo Valves APXMA3434 Pipe Adapter Apollo Valves APXMA1234 Pipe Adapter Apollo Valves APXMA3412 Pipe Adapter
Apollo Valves Pipe Adapter, Nominal Size: 3/4 in, PEX x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes Apollo Valves Pipe Adapter, Nominal Size: 3/4 x 1/2 in, PEX x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes Apollo Valves Pipe Adapter, Nominal Size: 1/2 x 3/4 in, PEX x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
PLUG TEST PEX PA 5PK 1/2IN    Genova 50310 CPVC Fittings CopperLoc 900 Non-Removable Push-Fit Tube Coupling With Stop
Apollo Valves ApolloPEX Pipe Plug, Nominal Size: 1/2 in, Barb Connection, 200 psi, Operating Temperature: 200 deg F, Poly Alloy, 7/8 in L, Suitable for: ApolloPEX Crimp Rings, Stainless Steel Pinch Clamps and Stainless Steel Sleeves NIBCO Pipe Adapter, Nominal Size: 1 in, Slip x FIP Connection, CPVC The CopperLoc? 900 non-removable push coupling with stop features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc? products are manufactured utilizing proven ASTM materials and standards.
CopperLoc 10170885 Tube Cap Flair-It 16870 Flair-It Flair-It 16800 Flair-It
ELKHART PRODUCTS CopperLoc Tube Cap, Nominal Size: 1/2 in, 200 psi, Operating Temperature: 250 deg F Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
ADAPTER 1/2PEX X 1/2MPT       PEX PLUG BLACK 1PC 1IN        PEX ELBOW BLACK 1/2IN
The SharkBite? PEX barb threaded male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is MNPT threaded on the other side. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent Pending. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX ELBOW MALE 1/2X3/8INMPT   PEX TEE BLACK 3/8IN           PEX ADAPTER MALE BLK 1/2IN
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX COUPLING REDUCNG 3/4X1/2IN PEX COUPLING BLACK 3/4IN      PEX ADAPT MALE 3/4X1/2INMPT
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX CAP BLACK 1/2IN           PEX ADAPTER MALE 1/2X3/4INMPT PEX COUPLING SWIVEL BLK 1/2IN
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent Pending. Black. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings.
PEX COUPLING 1/2MPTX1/2INMPT  Apollo Valves APXFA1212 Pipe Adapter Draintech 0440SDB Round Drain Grate
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Apollo Valves Pipe Adapter, Nominal Size: 1/2 in, PEX x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes Use with pipe and connecting fittings where a drain basin is not needed or where space doesn't allow the use of a basin. Use with corrugated single wall pipe, triple-wall pipe, leach pipe or PVC pipe. ADA compliant. Dual wall, SDR 35, 2729 S&D.
TEE BRASS 1/2 PEX             Apollo Valves APXT343412 Crimp Tube Tee ADAPTER FPT 1/2PEX X 3/4FPT
The SharkBite? PEX barb tee is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well. Apollo Valves Tube Tee, Nominal Size: 3/4 x 3/4 x 1/2 in, Suitable for: Apollo PEX Pipe Apollo Valves Hose Pipe Adapter, Nominal Size: 1/2 x 3/4 in, PEX x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
ADAPTER PEX-AXM BRS 1/2X1/2IN CopperLoc 907 Non-Removable Tube Elbow CopperLoc 906 Non-Removable Tube Elbow
Apollo expansion PEX female adapters are manufactured using lead-free dezincification resistant brass. Exclusively designed for use with PEX-A pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-A pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. Compatible with Uponor (Wirsbo) ProPEX? piping systems. ProPEX? is a trademark of Uponor. The CopperLoc? 907 non-removable push 90 deg elbow features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc? products are manufactured utilizing proven ASTM materials and standards. The CopperLoc? 906 non-removable push 45 deg elbow features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc? products are manufactured utilizing proven ASTM materials and standards.
Flair-It 26790 Flair-It Pex Polybutylene Adapter Flair-It 16840 Flair-It Flair-It 16799 Flair-It
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional. For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
ADAPTER 1/2PEX X 1/2 FPT      ELBOW BRASS 3/4PEX            PEX ELBOW MALE 1/2X1/2INMPT
The SharkBite? PEX barb threaded female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is FNPT threaded on the other side. The SharkBite? PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX ELBOW REDUCING 3/4X1/2    PEX ELBOW BLACK 3/4IN         PEX ELBOW SWIVEL 3/8X1/2FPT
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX TEE BLACK 1/2IN           PEX ADAPTER MALE BLACK 3/4IN  PEX CONNCTR MALE 1/2X3/4INMGH
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX COUPLG SWIVEL 3/8X1/2INFPT Conbraco APXC11 Apollo BrassCraft PSSL-13 Gas Supply Union
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings. UPC individually bagged.
BrassCraft MAU1-10-8 Gas Adapter ADAPTER PEX-AXF BRS 1/2X1/2IN Pro Bite 630-203HC/LF812FR Straight Tube To Pipe Adapter
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified. Apollo expansion PEX female adapters are manufactured using lead-free dezincification-resistant brass. Exclusively designed for use with PEX-A pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-A pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. Compatible with Uponor (Wirsbo) ProPEX? piping systems. ProPEX? is a trademark of Uponor. B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
CopperLoc 900 Non-Removable Push-Fit Tube Coupling With Stop Elkhart CopperLoc Push-Fit Tube Adapter Elkhart CopperLoc Push-Fit Tube Adapter
The CopperLoc? 900 non-removable push coupling with stop features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc? products are manufactured utilizing proven ASTM materials and standards. The CopperLoc? 903 non-removable push female adapter features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc? products are manufactured utilizing proven ASTM materials and standards. The CopperLoc? 904 non-removable push female adapter features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc? products are manufactured utilizing proven ASTM materials and standards.
CopperLoc 907-4 Non-Removable Tube Elbow Flair-It 16868 Flair-It Pex Polybutylene Adapter Flair-It 16862 Tube Plug
ELKHART PRODUCTS CopperLoc Non-Removable Tube Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Copper Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Used for inserting a plug into the end of a pipe. Bar coded.
Flair-It 16810 Flair-It Flair-It 16852 Flair-It Flair-It 16853 Flair-It
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded. Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
Flair-It 16815 Flair-It ADAPTER 3/4PEX X 3/4MPT       BrassCraft MAU2-10-8 Gas Adapter
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded. The SharkBite? PEX barb threaded male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is MNPT threaded on the other side. Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
Apollo Valves APXT121234 Crimp Tube Tee Apollo Valves APXT341212 Crimp Tube Tee Apollo Valves APXT341234 Crimp Tube Tee
Apollo Valves Tube Tee, Nominal Size: 1/2 x 1/2 x 3/4 in, Suitable for: Apollo PEX Pipe Apollo Valves Tube Tee, Nominal Size: 3/4 x 1/2 x 1/2 in, Suitable for: Apollo PEX Pipe Apollo Valves Tube Tee, Nominal Size: 3/4 x 1/2 x 3/4 in, Suitable for: Apollo PEX Pipe
Conbraco APXCR3810PK Apollo Conbraco APXCR1210PK Apollo Conbraco APXCR15PK Apollo
Apollo Valves Crimp Ring, Nominal Size: 3/8 in, Suitable for: PEX Tubing and Barb Fittings Apollo Valves Crimp Ring, Nominal Size: 1/2 in, Suitable for: PEX Tubing and Barb Fittings Apollo Valves Crimp Ring, Nominal Size: 1 in, Suitable for: Brass or Poly-Alloy Fittings
COUPLING PEX PA 5PK 1/2IN     ADAPTER SWIVEL 1/2F1960X1/2FEM Pro Bite 630-103HC/LF812MR Straight Tube To Pipe Adapter
ApolloPEX? poly alloy couplings are the most economical fitting available for the joining of PEX pipe. Apollo ExpansionPEX female adapters are manufactured using lead-free dezincification-resistant brass. Exclusively designed for use with PEXa pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water. B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x Male Connection, 200 psi, Brass
STEM MALE 1/2IN CTS X1/2IN MPT Pro Bite 633-004HC/LF826R End Cap Flair-It 16803 Flair-It Pex Polybutylene 90 Degree Elbow
Plastic male stem fitting for point of use low-pressure applications. It is designed and manufactured for many years of trouble-free service. Produced of off-white polypropylene, a high-performance thermoplastic material, the design allows for quick and easy connections without the use of installation tools. ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more. For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
Flair-It 16858 Flair-It Pex Polybutylene Adapter Flair-It 16863 Tube Plug Flair-It 16847 Flair-It
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Used for inserting a plug into the end of a pipe. Bar coded. Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
PEX COUPLING REDUCING 1X1/2IN PEX COUPLING REDUCING 1X3/4IN PEX ELBOW MALE BLK 3/4IN
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX ELBOW SWIVEL 1/2X1/2FPT   PEX CONN SWIVEL 1/2X3/4INFGH  ADAPTER REDUCE 1/2F1960X3/4SWT
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Apollo ExpansionPEX female adapters are manufactured using lead-free dezincification-resistant brass. Exclusively designed for use with PEXa pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water.
CONNECTOR 1/4OD X 1/4FP       CopperLoc 907 Non-Removable Tube Elbow Flair-It 16848 Flair-It Pex Polybutylene Adapter
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing. The CopperLoc? 907 non-removable push 90 deg elbow features a lead-free dezincification-resistant copper body, a stainless steel grab ring, a nylon separation ring and an EPDM O-ring. CopperLoc? products are manufactured utilizing proven ASTM materials and standards. Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
Flair-It 16873 Swivel Nut Coupling Flair-It 16850 Flair-It ADAPTER PEX MNPT 3/4IN X 1/2IN
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional. Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Transition between PEX pipe and an FNPT threaded connection with a crimp or clamp connection. Certified for use in potable water and hydronic heating systems.
PEX TEE REDUCING 1/2X1/2X3/4IN PEX TEE REDUCING 3/4X1/2X1/2IN PEX ADAPTER FEMALE BLK 1/2IN
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX ADAPTER BALLCOCK 1/2X7/8IN Hancor 0412AA Single Wall Corrugated External Snap Coupler BrassCraft PSSL-14 Gas Dryer Adapter
DRAIN COUPLING SNAP 4IN
Our Price: $4.99
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. For 1/4 in ID (3/8 in OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8 in female pipe thread. Dimension of 5-1/2 in L x 3.8 in W x 0.6 in D.
NDS 249 Offset Drain End Cap Adapter NDS 248 Corrugated Drain Fitting Apollo Valves APXT34 Crimp Tube Tee
NDS Offset Drain End Cap Adapter, Dimensions: 5 in L x 5 in W x 6 in D Extra wide, provides more area for channel connections. Use with 400 SPEE-D Series. Apollo Valves Tube Tee, Nominal Size: 3/4 in, Suitable for: Apollo PEX Pipe
FITTING DWNSPT ADPT 3X4IN BLK FITTING DOWNSPOUT ADPT 2INX3IN FITTING ELBOW/CONNECT FLEX 4IN
Polypropylene construction. Adapts to fit 3 in or 4 in corrugated pipe and 4 in PVC pipe (not included). DWV applications. Maximum working pressure of 70 psi. Minimum working temperature of -50 deg F, Maximum working temperature of 150 deg F. Flexible to fit most angles and provide easy connections. Amerimax Downspout Adapter, 4 in Connection, Plastic, Black, Suitable for: 3 in and 4 in Corrugated Pipes Polypropylene construction, Expands up to 21 in to reach pipes that have been cut short and to help repair damaged sections of pipe, Flexible to create angles or turns, maximum working pressure of 70 psi, minimum working temperature of -50 deg F and a maximum working temperature of 150 deg F, adapts to fit 3 in or 4 in corrugated pipe and 4 in PVC pipe (not included), DWV applications.
ELBOW PEX POLY ALLOY 5PK 1/2IN PLUG TEST PEX PA 5PK 3/4IN    MANIFOLD 3/4 F1960 2OUT 1/2IN
Apollo PEX poly alloy elbows are the most economical fitting available for the joining of PEX pipe. Apollo Valves ApolloPEX Pipe Plug, Nominal Size: 3/4 in, Barb Connection, 200 psi, Operating Temperature: 200 deg F, Poly Alloy, 7/8 in L, Suitable for: ApolloPEX Crimp Rings, Stainless Steel Pinch Clamps and Stainless Steel Sleeves Apollo ExpansionPEX male adapters are manufactured using lead-free dezincification-resistant brass. Exclusively designed for use with PEXa pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water.
CPLG PEX POLY ALY 3/4X1/2 5/PK ELBW PEX POLY ALY 1/2X3/4 5/PK Genova 51410 CPVC Fitting
Apollo PEX poly alloy couplings are the most economical fitting available for the joining of PEX pipe. Apollo Valves Pipe Elbow, Nominal Size: 1/2 x 3/4 in, Barb Connection, Angle: 90 deg, 200 psi, Operating Temperature: 200 deg F, Plastic, Black, Suitable for: Apollo PEX Crimp Rings, Stainless Steel Pinch Clamps and Stainless Steel Sleeves NIBCO Pipe Tee, Nominal Size: 1 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC
Mueller ProLine Standard Tube Coupling Flair-It 16820 Flair-It Flair-It 16861 Tube Cap
ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe. For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded. Used for capping off PEX fittings. Bar coded.
Flair-It 16874 Swivel Nut Coupling Flair-It 16802 Flair-It ADAPTER 3/4PEX X 3/4FPT
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional. Flair-It PEXLOCK Pipe Elbow, Nominal Size: 1/2 in, FPT Connection, Angle: 90 deg, Suitable for: PEX or Polybutylene Tubing The SharkBite? PEX barb threaded female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is FNPT threaded on the other side.
PEX COUPLING W/CLAMP BLACK 1IN PEX ELBOW SWIVEL 1/2X3/4FPT   PEX ELBOW SWIVEL 1/2X3/4FGH
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX TEE REDUCING 3/4X1/2X3/4IN COUPLING SWIVEL BLK 1/2X3/4FPT Conbraco APXFAE1212 Swivel Pipe Elbow
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Apollo PEX brass fittings are used for making junctions or directional changes with PEX pipe constructed potable water systems. All Apollo PEX brass fittings have barb ends unless otherwise noted. Apollo PEX brass fittings can be used with Apollo brand PEX-A or PEX-B pipe. Use Apollo PEX brass fittings with Apollo PEX pipe and fasten to pipe using Apollo crimp rings, Apollo pinch clamps or Apollo crimp sleeves with Apollo PEX tools.
BrassCraft PSSC-62 Gas Supply Adapter ELBOW MPT X 1/2 INCH BARB     FITTING ADAPTER GAS 3/8IN MIP
For corrugated tube. Recommended for gas range connections. Apollo PEX lead-free dezincification-resistant brass male elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately. BrassCraft Flare Adaptor, Nominal Size: 3/8 in, Flare x MIP Connection, Brass, Chromate-Coated, Yellow
RING CLAMP PEX RT 3/4IN       Genova 500 Transition Union STEM FEMALE 1/2CTS X 1/2FPT
Clamp brass or poly crimp fittings onto PEX or PE-RT pipe. The clamp ring is tightened using a PEX clamp tool to make a secure connection. Can be solvent welded directly to 3/4 in CPVC water supply line or 1/2 in CPVC pipe with a bushing (#50275). Also adapts to copper tubing from CPVC pipe by using Genogrip adapter (#53085). Plastic female stem fitting is ASSE 1061 certified for domestic plumbing service. It is designed and manufactured for many years of trouble-free service. Produced of off-white Polysulfone, a high-performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools.
Watts P-670 End Cap CopperLoc 901-R Non-Removable Push-Fit Tube Reducing Coupling Elkhart Tectite 911 CopperLoc Non-Removable Push-Fit Tube Tee
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC or PEX lines with just one fitting. Push fit, tool free, permanent fitting. Pre-lubed for quick installation, approved for underground installations. Bagged. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC or PEX lines with just one fitting. Push-fit, tool-free, permanent fitting. Pre-lubed for quick installation, approved for underground installations. Bagged.
CopperLoc 9707-3-5 Drop Ear Non-Removable Tube Elbow Flair-It 16816 Flair-It Pex Polybutylene 90 Degree Swivel Elbow Flair-It 16845 Flair-It Pex Polybutylene Coupling
ELKHART PRODUCTS CopperLoc Drop Ear Non-Removable Tube Pipe Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Copper For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. Bar coded. Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
PEX ELB SWIVEL 1/2MPTX1/2IN   PEX TEE MALE 1/2X1/2X1/2INMPT PEX TEE REDUCING 3/4X3/4X1/2IN
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending.
PEX COUPLING SWIVEL BLK 3/4IN PEX TEE 1/2X1/2X1/8INFPT      BrassCraft 293M Half Union Adapter
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK? clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK? part numbers come retail bagged fitting plus rings. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. For use with F0-6 (9/16-24) flare nut IBM # 9166414.
BrassCraft PSSL-16 Gas Supply Union Brass-Craft FU3-6 Pipe Union Hancor 0432AA Single Wall Solid Snap End Cap
DRAIN END CAP SNAP 4IN
Our Price: $5.69
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8 in female pipe thread. For use with F0-6 (9/16-24) flare nut IBM # 9166414. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved.
Oatey 42783 Cover Plates COUPLING PEX PA 5PK 3/4IN     ADAPTER 3/4 F1960 X1/2IN MALE
Oatey Flange Cover Plate, Chrome Plated Screw ApolloPEX? poly alloy couplings are the most economical fitting available for the joining of PEX pipe. Apollo ExpansionPEX male adapters are manufactured using lead-free dezincification-resistant brass. Exclusively designed for use with PEXa pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water.
COUPLING PEX-A BRASS 3/4X3/4IN KBI TPC-0750 Pipe to Tube Adapter Watts PL-3006 Push-Fit Tube To Pipe Adapter
Apollo Expansion PEX Couplings are manufactured using lead-free dezincification-resistant brass. Exclusively designed for use with PEX-a pipe, the fittings offer a larger I.D. than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-a pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. Molded CPVC/stainless steel design with internal knurl and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF? CPVC and type 304 stainless steel. Pressure rated to 100 psi at 180 deg F. Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts P-606 Push Connect Fittings CopperLoc 10170890 Tube Cap PEX ADAPTER MALE 1IN
WATTS? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the WATTS? quick-connect design allows for quick and easy connections without the use of installation tools. ELKHART PRODUCTS CopperLoc Tube Cap, Nominal Size: 3/4 in, 200 psi, Operating Temperature: 250 deg F Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX TEE BLACK 3/4IN           Brass-Craft PSSL-15 Female Pipe Union BrassCraft MAU1-10-12 Gas Adapter
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors. Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
NDS 1243 Storm Drain Fittings NDS 1245 Corrugated Drain Fittings Hancor 0433AA Single Wall Solid Internal Snap Plug
Universal adapters will connect to corrugated, sewer and drain and SCH 40 pipe in sizes ranging from 3 to 12 in fits 3 and 4 in, corrugated pipe, sewer and drain pipe, SCH 40 pipe and triple wall pipe. Basin adapters are specifically designed to connect NDS catch basins to multiple sized piping intended for the evacuation of drainage water. NDS Universal Adapter, Dimensions: 2-1/4 in L, Suitable for: 3, 4 in Corrugated Pipe, Sewer and Drain Pipe, SCH 40 Pipe and 4 in Triple Wall Pipe, 9, 12, 18 and 24 in Series Catch Basin 2410 Adapter For horizontal applications only. CSA approved.
Hancor 0462AA Single Wall Clay Snap Adapter BrassCraft MAU2-10-12 Gas Adapter NDS 0633SD Corrugated Drain Fittings
ADS Heavy-Duty Pipe Adapter, Nominal Size: 4 in, Snap Connection, PVC Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. A.G.A. design certified. NDS universal adapters are used to connect 3 or 4 in pipe to 9, 12, 18 and 24 in catch basin series. Features one end fits into 9, 12, 18 and 24 in catch basin series or #930, #1230, #1830 and #2410 adapters. Use with 24 in catch basin series also requires #2410 one end fits 3 and 4 in sewer and drain pipe, 3 and 4 in corrugated pipe, 3 and 4 in triple wall pipe, 4 in PVC SCH 40 pipe.
Brass-Craft PSSC-63 Male Half Union Apollo Valves APXT1112 Crimp Tube Tee Apollo Valves APXT1134 Crimp Tube Tee
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP. Apollo Valves Tube Tee, Nominal Size: 1 x 1 x 1/2 in, Suitable for: Apollo PEX Pipe Apollo Valves Tube Tee, Nominal Size: 1 x 1 x 3/4 in, Suitable for: Apollo PEX Pipe
Conbraco APXCR3410PK Apollo Conbraco APXCR12LT Apollo ADAPTER BARB 1"X3/4" MPT
Apollo Valves Crimp Ring, Nominal Size: 3/4 in, Suitable for: PEX Tubing and Barb Fittings Copper crimp ring with added plastic top to secure crimp ring position on pipe for proper ring placement. Apollo Valves Hose Pipe Adapter, Nominal Size: 1 x 3/4 in, Barb x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
ELBOW MPT X 3/4 INCH BARB     Conbraco PXPC3810PK Apollo Conbraco PXPC1210PK Apollo
Apollo PEX lead-free dezincification-resistant brass male elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately. Apollo? PEX Pinch clamps are constructed of high-quality stainless steel and designed for a lifetime of reliable PEX pipe joints. Apollo? PEX Pinch clamps are constructed of high-quality stainless steel and designed for a lifetime of reliable PEX pipe joints.
ADAPTER PEX-AXF BRS 3/4X3/4IN ADAPTER PEX-AXF BRS 3/4X1/2IN Genova 500 Solvent Weld Joints Transition Union
Apollo expansion PEX female adapters are manufactured using lead-free dezincification resistant brass. Exclusively designed for use with PEX-A pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-A pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. Compatible with Uponor (Wirsbo) ProPEX? piping systems. ProPEX? is a trademark of Uponor. Apollo ExpansionPEX female adapters are manufactured using lead-free dezincification-resistant brass. Exclusively designed for use with PEXa pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water. B & K Transition Pipe Adapter, Nominal Size: 1/2 in, Solvent x MIP Connection, Brass/CPVC
Anderson 53622-08 Hex Pipe Nipple Watts PL-3024 Push-Fit Tube To Pipe Adapter Watt PL-3015 Coupling Union
Anderson Metals Pipe Nipple, Nominal Size: 1/2 in, MPT Connection, 150 psi, Operating Temperature: 120 deg F, Suitable for: Plastic Tubing or Rubber Hose Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts P-412 Push-Fit Tube To Pipe Adapter Watts P-1019 Push Connect Fitting Pro Bite 631-003HC Tube Elbow
WATTS? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the WATTS? quick-connect design allows for quick and easy connections without the use of installation tools. WATTS? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the WATTS? quick-connect design allows for quick and easy connections without the use of installation tools. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
Mueller ProLine Tube Reducing Coupling Pro Bite 630-204HC/LF822FR Straight Tube To Pipe Adapter Pro Bite 630-104HC/LF822MR Straight Tube To Pipe Adapter
ProBite's lead-free reducing coupling connects copper, CPVC and PEX tubing in any combination, for long-lasting full flow connections. Easy to install, easy to remove, reusable, long-lasting and backed by a 75 years warranty. B & K ProLine Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing B & K ProLine Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
Flair-It 16844 Transition Coupling Flair-It 16831 Flair-It Pex Polybutylene Tee 3/8 x 3/8 x 3/8 Comp Flair-It 16846 Flair-It Pex Polybutylene Coupling
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional. For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded. Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
Flair-It 16864 Tube Plug Flair-It 16809 Flair-It PEX ELBOW W/CLAMP BLACK 1IN
Used for inserting a plug into the end of a pipe. Bar coded. For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded. Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.
PEX ELBOW SWIVEL BLK 3/4IN    Conbraco APXE11 Tube Elbow Draintech 0642SDB Square Drain Grate
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black. Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately. Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required. Grates fit directly into Sewer & Drain pipe or fittings and Corrugated pipe without the use of a coupling. Not for use in areas subject to vehicular traffic. Fits 6 in corrugated single wall and dual pipe, SDR 35, 2729 S&D and Triple Wall pipe. 18.9 sq-in open surface area. 1/4 in grate opening. 0 to 60 psi. (BLACK) Can also be used with 6 in round catch basins. ADA compliant.
Brass-Craft PSSC-64 Male Half Union Brass-Craft PSSD-43 Male Half Union BrassCraft 2294M Half Union Adapter
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP. For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for fixed air heater, gas range, furnace and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8 in FIP thread. The flare reducing male adapter is highly dependable and an economical choice of fitting for refrigeration, compression, heating and air and other industrial markets. This all-brass fitting features a vibration-resistant construction. It resists mechanical pullout and is designed for high pressure service.
BrassCraft 294F Half Union Adapter BrassCraft PSSC-66 Gas Supply Adapter Apollo Valves APXFSA11 Pipe Adapter
For use with F0-6 (9/16-24) flare nut IBM # 9166414. For corrugated tube. Recommended for gas range connections. Apollo Valves Pipe Adapter, Nominal Size: 1 in, PEX x Female Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
Apollo Valves APXMA341 Pipe Adapter Apollo Valves APXMSA11 Pipe Adapter ADAPTER FPT SWIVEL 3/4INX3/4IN
Apollo Valves Pipe Adapter, Nominal Size: 3/4 x 1 in, PEX x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes Apollo Valves Pipe Adapter, Nominal Size: 1 in, PEX x Male Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes Apollo Valves Hose Pipe Adapter, Nominal Size: 3/4 in, Barb x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
FITTING DRAIN FLEXIBLE 4IN T/Y KBI TPC-0500 Pipe to Tube Adapter Watts PL-3004 Push-Fit Tube To Pipe Adapter
Polypropylene construction. Adapts to fit 3 in or 4 in corrugated pipe and 4 in PVC pipe (not included). Flexes to become a wye or tee. For DWV applications. Maximum working pressure of 70 psi. Minimum working temperature of -50 deg F and a maximum working temperature of 150 deg F. Bends to fit most angles. Molded CPVC/stainless steel design with internal knurl and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF? CPVC and type 304 stainless steel. Pressure rated to 100 psi at 180 deg F. Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL-3005 Push-Fit Tube To Pipe Adapter Watts PL-3007 Push-Fit Tube To Pipe Adapter Watts PL-3025 Push-Fit Tube To Pipe Adapter
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL-3026 Push-Fit Tube To Pipe Adapter Watts PL-3027 Push-Fit Tube To Pipe Adapter Watts PL Tube Elbow
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. This quick-connect elbow fitting works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making it ideal for vibrating and dynamic applications.
Watt PL-3000 Quick Connect Coupling Union Watts PL Tube Elbow Watts PL Tube Elbow
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. This 1/4 in x 1/8 in MIP quick-connect elbow works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
   
 
1 2 3