Home > ELECTRICAL > ROUGH ELECTRICAL > SWITCHES & RECEPTACLES
Choose a sub category:
DUPLEX RECEPTACLES SINGLE RECEPTACLES GFCI RECEPTACLES/SWITCHES
APPLIANCE RECEPTACLES USB & COMBO RECEPTACLES WIFI / SMART RECEPTACLES
MOTION SENSOR SWITCHES SINGLE POLE SWITCHES 3-WAY SWITCHES
4-WAY SWITCHES DOUBLE POLE SWITCHES SWITCH COMBOS
SWITCH/RECEPTACLE COMBOS DIMMER SWITCHES FAN CONTROL SWITCHES
WIFI / SMART SWITCHES & CONTRO FAN PULL CHAIN SWITCHES CANOPY SWITCHES
PUSH BUTTON SWITCHES TOGGLE SWITCHES ROTARY SWITCHES
IN-LINE SWITCHES MISC SWITCHES
Sort By:
1 2
Cooper 270W Grounded Duplex Receptacle Cooper 1301-7W Framed Grounding Toggle Switch Cooper 270V Grounded Duplex Receptacle
Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada. Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire.
RECEPTACLE DUPLEX 15A 125V LA Cooper 270B Grounded Duplex Receptacle Cooper 1301-7V Framed Grounding Toggle Switch
Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada.
Cooper 1301-7B Framed Grounding Toggle Switch Cooper TR270W Tamper Resistant Duplex Receptacle Cooper TR270V Tamper Resistant Duplex Receptacle
Longer, wider strap on toggle switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada. Tamper-resistant duplex receptacles provide compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. TR designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire. Tamper-resistant duplex receptacles provide compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. TR designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire.
Arrow Hart CR15B Duplex Receptacle RECEPTACLE DUPLEX LIGHT ALMOND Arrow Hart CR15V Duplex Receptacle
Commercial specification-grade straight blade receptacles - 15 A-125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Receptacles provide compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire. Commercial specification-grade straight blade receptacles - 15 A-125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time.
Cooper TR270V Tamper Resistant Duplex Receptacle Arrow Hart CR15W Duplex Receptacle Cooper TR270W Tamper Resistant Duplex Receptacle
Receptacles provide compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire. Commercial specification-grade straight blade receptacles - 15 A-125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Receptacles provide compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire.
Cooper 1303B Framed Non-Grounded Toggle Switch Cooper 1303-7 Framed Grounded Toggle Switch Cooper 1303-7 Framed Grounded Toggle Switch
Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada. Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada. Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada.
Cooper RKRD-W-BP Replacement Knob Cooper RKRD-V-BP Replacement Knob Cooper 736W-BOX Duplex Receptacle
CULus listed, NOM certified. CULus listed, NOM certified. Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 A/125 V. UL listed.
RECEPTACLE DECOR 2P 3W 15A LA RECEPTACLE DUPLEX 2P 3W 15 LA Arrow Hart CR20W Grounded Duplex Receptacle
Decorator receptacles feature longer, wider straps providing 40% more contact area to wall board. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Decorator receptacles feature longer, wider straps providing 40% more contact area to wall board. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Commercial specification-grade straight blade receptacles - 15 A-125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time.
Arrow Hart CR20V Grounded Duplex Receptacle RECEPTACLE BULK LT ALMOND 20A Cooper 5270 Standard Duplex Receptacle
Commercial specification-grade straight blade receptacles - 20 A-125 V, NEMA 5-20R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Commercial Specification Grade Straight Blade Receptacles, 20 A to 125 V, NEMA 5-20R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Meets all UL 498 and 1567 requirements. Longer, wider strap provides 40 percent more contact area. Side wire terminals accept up to #10 solid or standard copper or aluminum wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. 15 amp, 125 volt. Bulk pack.
Spot-Gro C270V Duplex Electrical Receptacle Cooper 5270 Standard Duplex Receptacle Cooper C270W Duplex Receptacle
Built-in wire stripper for #14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire only. 15 A/125 V. UL listed, NOM certified, meets CSA requirements. Meets all UL 498 and 1567 requirements. Longer, wider strap provides 40 percent more contact area. Side wire terminals accept up to #10 solid or standard copper or aluminum wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. 15 amp, 125 volt. Bulk pack. Built-in wire stripper for #14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire only. 15 A/125 V. UL listed, NOM certified, meets CSA requirements.
Cooper 1107V Decorator Duplex Receptacle Cooper 1107W Grounded Duplex Receptacle Arrow Hart CR20B Grounded Duplex Receptacle
Decorator receptacles feature longer, wider straps providing 40% more contact area to wall board. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire and wire looper for pre-looping. Combination slot/Phillips head mounting and terminal screws for installation with power screwdrivers. Terminal screws backed out - ready for wiring. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no. E15058), Fed. Specs. WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt. Commercial specification-grade straight blade receptacles - 20 A-125 V, NEMA 5-20R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time.
Cooper 7500-Box Decorative Standard Rocker Switch RECEPTACLE DECO AG LT ALMOND Cooper 1107-9BK Decorator Duplex Receptacle
Decorator switches feature ultrasonic welding and integrated construction of the strap and body provide superior integrity. Back wire clamps on the side terminals provide for easy installation of #12 and #14 wire. Re-designed paddle for easier actuation and quiet operation. Thermoplastic rocker, top and back body are virtually unbreakable, promising years of durable performance. Tri-combo screws accept Slotted, Phillips and Robertson head tools for installation flexibility. Long, broad mounting strap virtually eliminates floating installations. Patented built-in wire stripper for #12 and #14 wire to speed installation. Stippled ground screw terminal standard. 120/277 VAC rating ideal for fluorescent lighting fixtures typical in commercial applications. Push-in terminals accept #14 solid wire. Arrow Hart Duplex Receptacle Wallplate, 125 V, 15 A, 2 Pole, 3 Wires, 14 to 12 AWG Wire, 5-15R, Flush Mounting, Thermoplastic, Light Almond, Dimensions: 1.3 in W x 0.69 in D x 4.19 in H Decorator Receptacles with autoground feature longer, wider straps providing 40% more contact area to wall board. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire.
Arrow Hart BR15V Duplex Receptacle Arrow Hart BR15W Duplex Receptacle Cooper 7500-Box Decorative Standard Rocker Switch
Eaton Duplex Receptacle, 125 V, 15 A, Number of Poles: 2, Number of Wires: 3, Wiring Type: Back, Side, Wire Size: 14 to 10 AWG, NEMA Configuration: 5-15R, Flush Mounting, PVC, Ivory, Dimensions: 1.3 in L x 0.88 in W x 4.2 in H Commercial-grade straight blade receptacles 15 A, 125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Decorator switches feature ultrasonic welding and integrated construction of the strap and body provide superior integrity. Backwire clamps on the side terminals provide for easy installation of #12 and #14 wire. Re-designed paddle for easier actuation and quiet operation. Thermoplastic rocker, top and back body are virtually unbreakable, promising years of durable performance. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Long, broad mounting strap virtually eliminates floating installations. Patented built-in wire stripper for #12 and #14 wire to speed installation. Stippled ground screw terminal standard. 120/277 VAC rating ideal for fluorescent lighting fixtures typical in commercial applications. Push-in terminals accept #14 solid wire.
SWITCH/ROCKER 1P LA Cooper TR1107V Decorative Tamper Resistant Duplex Receptacle Cooper TR1107W Decorative Tamper Resistant Duplex Receptacle
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire.
Cooper TWR270V Tamper Resistant Weatherproof Duplex Receptacle Cooper TR1107W Decorator Tamper Resistant Duplex Receptacle Cooper TR1107V Decorator Tamper Resistant Duplex Receptacle
Weather-resistant receptacle. Provides compliance with 2011 NEC Article 406.9 that states that all receptacles installed in wet and damp locations must be weather-resistant. "WR" designations provide visual identification. Weather-resistant receptacles offer protection from rain, snow, ice, moisture and humidity when properly installed in an approved weather protective or while-in-use cover. Weather-resistant receptacles are for use in any residential or commercial outdoor location. Designed with enhanced nylon and corrosion resistant metal components weather-resistant receptacles are extra durable. Combine WR receptacles with any of our WeatherBox while-in-use protective covers for tough protection against the elements. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire.
Cooper TWR270W Tamper Resistant Weatherproof Duplex Receptacle Arrow Hart CSB GRD Pro Toggle Switch Arrow Hart CS Compact Toggle Switch
Provides compliance with 2011 NEC Article 406.9 that states that all receptacles installed in wet and damp locations must be weather-resistant. "WR" designations provide visual identification. Weather-resistant receptacles offer protection from rain, snow, ice, moisture and humidity when properly installed in an approved weather protective or while-in-use cover. Weather-resistant receptacles are for use in any residential or commercial outdoor location. Designed with enhanced nylon and corrosion-resistant metal components weather-resistant receptacles are extra durable. Combine WR receptacles with any of our WeatherBox while-in-use protective covers for tough protection against the elements. Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 ga or 14 ga wire. Heavy-duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for #12 and #14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-combo head mounting and terminal screws. 15 A, 120/277 V. cULus listed, NOM certified. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896.
Arrow Hart CSB GRD Pro Toggle Switch Arrow Hart CS Compact Toggle Switch Arrow Hart Eagle CS Toggle Switch
Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 ga or 14 ga wire. Heavy-duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for #12 and #14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-combo head mounting and terminal screws. 15 A, 120/277 V. cULus listed, NOM certified. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896.
Arrow Hart Eagle CS Toggle Switch Arrow Hart CS Lighted Toggle Switch Arrow Hart CS Lighted Toggle Switch
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896.
SWITCH TOGGLE LT ALMOND 20A Arrow Hart BR20V Duplex Receptacle Arrow Hart BR20W Duplex Receptacle
Eaton Wiring Devices Toggle Switch, 120, 277 VAC, 20 A, 1 Pole, Steel Contact, -40 to 65 deg C, Flush Mounting, PVC Housing Material, Light Almond, Dimensions: 1.3 in L x 0.902 in W x 4.2 in H Commercial specification-grade straight blade receptacles - 15 A, 125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Commercial specification-grade straight blade receptacles - 15 A, 125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time.
RECEPTACLE COMM LT ALMOND 20A Gardner Bender GSW-61 Rotary Switch Jandorf 60180 In-Line Switch
Commercial Specification Grade Straight Blade Receptacles, 20 A to 125 V, NEMA 5-20R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. The Gardner Bender 6/3 A rotary switch features a brass knob to highlight your decor. The switch is compatible with a 13/32 in mounting hole and is ideal for use with lamps or other light-duty applications. This switch offers single-pole, single-throw (SPST) on-off circuitry and has 6 in 18 AWG wire leads for installation. On/off switch. CSA Listed.
Jandorf 88920 In-Line Switch Cooper 827 Duplex Receptacle Cooper 827 Duplex Receptacle
On/off switch. CSA Listed. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 1/2 in thick steel wraparound mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 1/2 in thick steel wraparound mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws.
Cooper 827 Duplex Receptacle Arrow Hart Eagle CS Lighted Toggle Switch Cooper 1301-7 Framed Grounded Toggle Switch
Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 1/2 in thick steel wraparound mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Longer, wider strap on toggle lighted switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire.
Cooper 1301-7 Framed Grounded Toggle Switch SWITCH AC QUIET LT ALMOND Gardner Bender GSW Standard Toggle Switch
Longer, wider strap on toggle lighted switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Eaton Wiring Devices Toggle Switch, 120, 277 VAC, 15 A, 1 Pole, Screw Terminal, -40 to 65 deg C, PVC Housing Material, Light Almond, Dimensions: 1.3 in L x 0.902 in W x 4.2 in H Gardner? Bender switches are available in many different styles and sizes. They are used in countless applications, from basic On-Off to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner? Bender switches are leading the industry in quality and durability.
Cooper 410W Feed-Through Cord Switch Cooper 410 Feed-Through General Duty Cord Switch Arrow Hart 1877 Single Receptacle
In-line On/Off switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 A/125 VAC, 3 A/250 VAC, 3 A/125 VAC "T". For #18 SPT-1. In-line On/Off switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 A/125 VAC, 3 A/250 VAC, 3 A/125 VAC "T". For #18 SPT-1. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. 20 A, 125 V.
Arrow Hart 1877 Single Receptacle RECEPTACLE SGL LT ALMOND 125V Arrow Hart 1877W Single Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. 20 A, 125 V. Eaton Wiring Devices Single Receptacle, 125 VAC, 20 A, 2 Pole, 3 Wires, Side Wiring, 14 to 10 AWG Wire, NEMA 5-20R, -4 to 140 deg F Operating, Flush Mounting, PVC, Light Almond, Dimensions: 1.3 in L x 0.87 in W x 4.19 in H Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. 20 A, 125 V.
Cooper 7500-Box Decorative Standard Rocker Switch Cooper 7500-Box Decorative Standard Rocker Switch GB-Gardner Bender GSW-24 Canopy Switches
Decorator switches feature ultrasonic welding and integrated construction of the strap and body provide superior integrity. Backwire clamps on the side terminals provide for easy installation of #12 and #14 wire. Re-designed paddle for easier actuation and quiet operation. Thermoplastic rocker, top and back body are virtually unbreakable, promising years of durable performance. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Long, broad mounting strap virtually eliminates floating installations. Patented built-in wire stripper for #12 and #14 wire to speed installation. Stippled ground screw terminal standard. 120/277 VAC rating ideal for fluorescent lighting fixtures typical in commercial applications. Push-in terminals accept #14 solid wire. Decorator switches feature ultrasonic welding and integrated construction of the strap and body provide superior integrity. Back wire clamps on the side terminals provide for easy installation of #12 and #14 wire. Re-designed paddle for easier actuation and quiet operation. Thermoplastic rocker, top and back body are virtually unbreakable, promising years of durable performance. Tri-combo screws accept Slotted, Phillips and Robertson head tools for installation flexibility. Long, broad mounting strap virtually eliminates floating installations. Patented built-in wire stripper for #12 and #14 wire to speed installation. Stippled ground screw terminal standard. 120/277 VAC rating ideal for fluorescent lighting fixtures typical in commercial applications. Push-in terminals accept #14 solid wire. Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability.
GB-Gardner Bender GSW-22 Momentary Switches Gardner Bender GSW Toggle Switch Gardner Bender GSW Standard Toggle Switch
The Gardner Bender 20 A or 10 A toggle switch features an O-ring and has screw terminals for quick-and-easy connections. The switch offers single-pole, single-throw (SPST) on-off circuitry in a classic bat-handle design for easy usage. This switch is compatible with standard 1/2 in mounting holes. These Gardner? Bender double insulated for moisture protection in all environments. Switch must be installed with a hex nut (provided) behind panel to prevent damage during installation. Ideal for marine/recreational equipment and weather-resistant applications. Internal O-ring design for moisture and dust resistance. The Gardner? Bender 8/4 A toggle switch with faceplate has an On/Off faceplate for ease of use. The switch is designed for medium-duty applications and has 1-pole, single-throw (SPST) On-Off circuitry. The switch is compatible with standard 1/2 in. Mounting holes and features 6 in. Wire leads for a wide range of uses.
Gardner Bender GSW-69 Rotary Switch Cooper 735B-BOX Toggle Switch Cooper 410B Feed-Through Cord Switch
Gardner Bender switches are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. Surface mount, side wire, feed-through heavy-duty plastic construction switch for SPT cord, 10 A at 125 V, 5 A at 250 V. In-line On/Off switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 A/125 VAC, 3 A/250 VAC, 3 A/125 VAC "T". For #18 SPT-1.
Gardner Bender GSW Lighted Standard Rocker Switch SWITCH LGT ROCK MINI SPST O/F GB-Gardner Bender GSW-25 Canopy Switches
Gardner Bender rocker switches are for automotive, marine, industrial and general electrical use. Rocker switches are one of the most commonly used switch styles in electrical applications today. Rocker switches are available in a variety of different sizes and features. No matter what the application, these rocker switches can be a great solution for a professional look and quality performance. To clearly indicate the actuation of an application, try an illuminated rocker switch. If an application requires only momentary actuation, try a momentary rocker switch. Along with our standard line of rockers. Gardner Bender illuminated mini rocker switches feature a rectangular shape with a red full face that gently glows from an incandescent bulb when switch is actuated to the "on" position. Each miniature rocker switch is great for various auto, marine and industrial applications, such as lighting panels, industrial controls and van conversions. No matter what the application, these rocker switches can be a great solution for a professional look and quality performance. To clearly indicate the actuation of an application, try an illuminated rocker switch. If an application requires only momentary actuation, try a momentary rocker switch. Along with our standard line of rockers. Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability.
Gardner Bender GSW Toggle Switch Cooper 877 Grounded Duplex Receptacle Cooper 877 Grounded Duplex Receptacle
Gardner? Bender switches are available in many different styles and sizes. They are used in countless applications, from basic On-Off to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner? Bender switches are leading the industry in quality and durability. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 1/2 in thick steel wraparound mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 1/2 in thick steel wraparound mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws.
Cooper 877 Grounded Duplex Receptacle Cooper BP458NP-SP Canopy Switch With Bell End Gardner Bender GSW-23 Push Button Switch
Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 1/2 in thick steel wraparound mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4 in. With end bell. The Gardner Bender GSW-23 push-button switch with momentary contact is perfect for use with test and emergency equipment. It has a normally off mechanism, a single pole with a single throw switch and a black button screw terminal.
GB-Gardner Bender GSW-20 Toggle Switch Covers Gardner Bender GSW-12 Toggle Switch Gardner Bender Professional GSW Toggle Switch
GB Toggle Switch Covers, EDPM Rubber Gardner? Bender has a versatile toggle switch family with multiple position configurations. Toggle switches feature flat terminals and are available in four different actuations; SPST, SPDT, DPST and DPDT. Flat terminal heavy-duty toggle switches meet the standards of today's automotive, marine and industrial applications and are great for electrical connections. The Gardner? Bender 20/10 A toggle switch features double pole, single-throw (DPST) On-Off-On circuitry that is great for industrial equipment or emergency lighting. The UL listed switch has a classic bat handle design for easy usage and screw terminals for quick and easy connections.
Gardner Bender GSW-120 Toggle Switch Gardner Bender GSW Canopy Toggle Switch Gardner Bender GSW Economy Rocker Switch
Gardner? Bender switches are available in many different styles and sizes. They are used in countless applications, from basic On-Off to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner? Bender switches are leading the industry in quality and durability. These Gardner? Bender double insulated for moisture protection in all environments. Switch must be installed with a hex nut (provided) behind panel to prevent damage during installation. Ideal for marine/recreational equipment and weather-resistant applications. Internal O-ring design for moisture and dust resistance. Gardner Bender switches are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability.
Arrow Hart TR Duplex Receptacle Arrow Hart TR Duplex Receptacle Jandorf 61014 Single Electrical Receptacle
Commercial specification-grade straight blade receptacles - tamper-resistant 15 A - 125 V, NEMA 5-15R. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper resistant. "TR" designations provide visual identification. Commercial specification-grade straight blade receptacles - tamper-resistant 15 A - 125 V, NEMA 5-15R. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper resistant. "TR" designations provide visual identification. Jandorf Single Receptacle, 125 V, 15 A, 2 Pole, 2 Wires, 16 AWG Wire, Black
Jandorf 61015 Single Electrical Receptacle Cooper 5221-7 Grounded Standard Toggle Switch Eagle 5221-7 Grounded Standard Toggle Switch
Jandorf Single Receptacle, 125 V, 15 A, 2 Pole, 2 Wires, 16 AWG Wire, White For direct connection to aluminum or copper wire. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 A, 120 V. UL listed. Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed.
Cooper 1301-7 Framed Grounded Toggle Switch Cooper C1303-7V Framed Grounded Toggle Switch Gardner Bender GSW-32 Pull Chain Switch
Longer, wider strap on toggle lighted switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Longer, wider strap on toggle lighted switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination.
GB-Gardner Bender GSW-39 Canopy Switches Gardner Bender GSW-31 Pull Chain Switch GB-Gardner Bender GSW-21 Canopy Switches
Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Mounts in 13/32 in Dia hole. Two-position, 2 wire. (GSW-35 mounts in 1/2 in Dia hole). number 18 AWG, 6 in stripped wire leads. Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination.
Jandorf 61155 Toggle Switch Nut Gardner Bender GSW Toggle Switch Gardner Bender GSW-62 Rotary Switch
Jandorf Toggle Switch Nut, Specifications: M12x1-6H Thread, 2.5 mm Thickness, Dimensions: 14 mm OD Gardner? Bender has a versatile toggle switch family with multiple position configurations. Toggle switches feature flat terminals and are available in four different actuations; SPST, SPDT, DPST and DPDT. Flat terminal heavy-duty toggle switches meet the standards of today's automotive, marine and industrial applications and are great for electrical connections. The Gardner Bender 6/3 A rotary switch features a brass knob to highlight your decor. The switch is compatible with a 13/32 in mounting hole and is ideal for use with lamps or other light-duty applications. This switch offers double pole, triple throw (DP3T) on-off circuitry and has 6 in 18 AWG wire leads for installation. For use in lamps or other light-duty applications.
RECEPT DUPLEX RB 15A 125V 2P3W Cooper 270W Grounded Duplex Receptacle Arrow Hart TRBR20W-BXSP Tamper Resistant Duplex Receptacle
Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire. Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Commercial specification-grade straight blade receptacles. Tamper-resistant 20 A-125 V, NEMA 5-20R. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper resistant. "TR" designation provides visual identification.
Cooper C1507V Grounded Standard Duplex Receptacle Cooper C1507W Grounded Standard Duplex Receptacle Cooper 270V10 Grounded Duplex Receptacle
With No. 1107 wallplate. UL listed. 15 A, 125 V, grounded. Carded. With No. 1107 wallplate. UL listed. 15 A, 125 V, grounded. Carded. Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire.
Arrow Hart TRBR20V-BXSP Tamper Resistant Duplex Receptacle Jandorf 61224 Single Circuit Push Button Switch Gardner Bender Professional GSW-14 Toggle Switch
Commercial specification-grade straight blade receptacles. Tamper-resistant 20 A-125 V, NEMA 5-20R. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper resistant. "TR" designation provides visual identification. Jandorf Switch, 125/250 VAC, 3/6 A, 1 Pole, Switch Functions: On/Off, SPST Contact Configuration, Lead Wire Terminal, Brass The Gardner? Bender 20/10 A toggle switch features an O-ring and has screw terminals for quick and easy connections. The switch offers 1-pole, single-throw (SPST) On-Off circuitry in a classic bat handle design for easy usage. This switch is compatible with standard 1/2 in mounting holes.
Cooper 933 Feed-Through Cord Switch Cooper 933V Feed-Through Carded Cord Switch Cooper 933B Feed-Through Carded Cord Switch
Feed-through In-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed, meets all CSA requirements. Feed-through In-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed, meets all CSA requirements. Feed-through In-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed, meets all CSA requirements.
Cooper 78B-BOX Duplex Electrical Receptacle Cooper A12 869-BOX Duplex Receptacle RECP DECO DPLX TMP WH 2P3W 20A
General duty. Meets all UL 498 requirements. Heavy-duty plastic construction. For use with surface mounted wiring to expand convenience receptacles on solid plaster or concrete wall. UL listed. Size 1-5/32 in D x 3-43/64 in L x 1-15/16 in W. Commercial specification-grade straight blade receptacle on 4 in galvanized steel cover. Back and side wire. 15 A, 125 V. 5-15R NEMA. Temperature rating of -20 to 60 deg C. UL listed, meets all CSA requirements, NOM Certified. Eaton Wiring Devices Duplex Receptacle, 125 V, 20 A, 60 Hz Frequency, 2 Pole, 3 Wires, Back, Side Wiring, 14 to 10 AWG Wire, 5-20R, -20 to 60 deg C Operating, PVC, White
RECP DECO TMPR IVRY 2P3W 20A Arrow Hart 816 Single Receptacle Arrow Hart 816 Single Receptacle
Eaton Wiring Devices Duplex Receptacle, 125 V, 20 A, 60 Hz Frequency, 2 Pole, 3 Wires, Back, Side Wiring, 14 to 10 AWG Wire, 5-20R, -20 to 60 deg C Operating, PVC, Ivory Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 A, 250 V. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 A, 250 V.
Arrow Hart 817 Single Receptacle Arrow Hart 817W Single Receptacle Jandorf 61202 Canopy Switch
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. cULus listed. 15 A, 125 V. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. cULus listed. 15 A, 125 V. Jandorf Pull Chain Switch, 125 V, 3 A, Number of Poles: 1, Action: Off/On/On, Brass
Gardner Bender GSW-34 3-Speed Pull Chain Switch Jandorf 61157 Toggle Switch Plate Gardner Bender Professional GSW-16 Toggle Switch
Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. On/Off markings. Gardner? Bender switches are available in many different styles and sizes. They are used in countless applications, from basic On-Off to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner? Bender switches are leading the industry in quality and durability.
Jandorf 61217 Single Circuit Rotary Switch Jandorf 61220 Single Circuit Rotary Switch Jandorf 61021 Momentary Switch
Jandorf Single Circuit Rotary Switch, 125 V, 1 A, 1 Pole, SPST Contact Configuration Jandorf Single Circuit Rotary Switch, 125 V, 1 A, 1 Pole, SPST Contact Configuration, Brass Jandorf Momentary Slide Switch, 125 V, 3 A, SPDT Contact Configuration, On/On, Tab Terminal
SWITCH LGT ROCK RND SPST O/F SWITCH LGT ROCK SQ SPST O/F Jandorf 61016 Single Electrical Receptacle
Gardner Bender switches are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability. Gardner Bender switches are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability. Jandorf Single Receptacle, 125 V, 15 A, 3 Pole, 3 Wires, 14 AWG Wire, Black
Jandorf 61017 Single Electrical Receptacle Arrow Hart 1876 Single Receptacle Arrow Hart 1876 Single Receptacle
Jandorf Single Receptacle, 125 V, 15 A, 3 Pole, 3 Wires, 14 AWG Wire, White Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 A, 250 V. Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt.
RECEPTACLE SGL LT ALMOND 250V Arrow Hart 1876W Grounded Single Receptacle SWITCH DEC SP 15A 120/277V ORB
Eaton Wiring Devices Single Receptacle, 250 V, 20 A, 2 Pole, 3 Wires, Side Wiring, 14 to 10 AWG Wire, NEMA 6-20R, -4 to 140 deg F Operating, Flush Mounting, PVC, Light Almond, Dimensions: 1.31 in L x 0.83 in W x 4.19 in H Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 A, 250 V. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements.
SWITCH DECO SP 15A 120/277V SG Jandorf 61216 Single Circuit Rotary Switch CORD SWITCH HVDY BROWN 250V
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements. Jandorf Single Circuit Rotary Switch, 125 V, 1 A, 1 Pole, SPST Contact Configuration GB Cord Switch, 125/250 VAC, 3, 6 A, 1 Pole, SPST Action, 75 deg C, Brown
SWITCH ROCKER SPST 20A ON/OFF Jandorf 61020 Slide Switch Jandorf 61023 Slide Switch
Gardner Bender rocker switches are for automotive, marine, industrial and general electrical use. Rocker switches are one of the most commonly used switch styles in electrical applications today. Rocker switches are available in a variety of different sizes and features. No matter what the application, these rocker switches can be a great solution for a professional look and quality performance. To clearly indicate the actuation of an application, try an illuminated rocker switch. If an application requires only momentary actuation, try a momentary rocker switch. Along with our standard line of rockers. Jandorf Slide Switch, 125 V, 3 A, DPDT Contact Configuration, On/On, Tab Terminal Jandorf Slide Switch, 125 V, 3 A, SPST Contact Configuration, On/Off, Tab Terminal
Cooper 125 Dryer Electrical Receptacle Arrow Hart CSB GRD Pro Toggle Switch Cooper TR817V-BOX Tamper Resistant Single Receptacle
Commercial power receptacles 30 A, 125/250 V NEMA 10-30 3-pole/3-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application. Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 ga or 14 ga wire. Heavy-duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for #12 and #14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-combo head mounting and terminal screws. 15 A, 120/277 V. cULus listed, NOM certified. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. cULus listed. 15 A, 125 V.
Cooper TR817W-BOX Tamper Resistant Single Receptacle Cooper 112 Range Electrical Receptacle Arrow Hart CSB GRD Pro Toggle Switch
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. cULus listed. 15 A, 125 V. Commercial and industrial power receptacles 50 A, 125/250 V NEMA 10-50 3-pole/3-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application. Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 ga or 14 ga wire. Heavy-duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for #12 and #14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-combo head mounting and terminal screws. 15 A, 120/277 V. cULus listed, NOM certified.
Core React RI061-VW-K2 Non-Preset Rotary Dimmer Jandorf 61208 Canopy Switch Jandorf 61215 3-Way Double Circuit Rotary Switch
Rotary dimmers provide a smooth rotation and full range dimming for incandescent lighting. Compatible with any traditional-style switch, wallplate or screwless wallplate. Jandorf Pull Chain Switch, 125 V, 3 A, Number of Poles: 1, Action: On/Off, Nickel Jandorf Double Circuit Rotary Switch, 125 V, 3 A, 2 Pole, Brass
Cooper Wiring 735V-BOX Toggle Switch Cooper 933 Feed-Through Cord Switch Jandorf 61022 Slide Switch
Eaton Wiring Devices Switch, 125/250 V, 10 A, Lead Wire Terminal, Plastic Housing Material, Ivory, Dimensions: 1.88 in L x 2 in W x 2 in H Feed-through In-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed, meets all CSA requirements. Jandorf Slide Switch, 125 V, 3 A, SPDT Contact Configuration, On/Off, Tab Terminal
Gardner Bender GSW Economy Lighted Rocker Switch Cooper TR1877W-BXSP Tamper Resistant Single Receptacle Cooper TR1877V-BXSP Tamper Resistant Single Receptacle
Gardner Bender switches are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. 20 A, 125 V. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. 20 A, 125 V.
Arrow Hart 32B Non-Grounded Electrical Receptacle Arrow Hart 38B Non-Grounded Electrical Receptacle Cooper 1301-7V10 Framed Grounding Toggle Switch
Commercial and industrial power receptacles 50 A, 125/250 V NEMA 10-50 3-pole/3-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application. Commercial power receptacles 30 A, 125/250 V NEMA 10-30 3-pole/3-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application. Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada.
Cooper 1301-7W10 Framed Grounding Toggle Switch Cooper 5223-7 Grounded Standard Toggle Switch Cooper 5223-7 Standard Toggle Switch
SWITCH TOGGLE 3-WAY WHT
Our Price: $8.69
Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada. For direct connection to aluminum or copper wire. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 A, 120 V. UL listed. Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed.
Jandorf 61200 Canopy Switch GB-Gardner Bender GSW-35 Canopy Switches Gardner Bender GSW Toggle Switch
Jandorf Pull Chain Switch, 125 V, 3 A, Number of Poles: 2, Action: Off/L1/L2/L1-2, Cord Size: 6 in, Brass Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner? Bender has a versatile toggle switch family with multiple position configurations. Toggle switches feature flat terminals and are available in four different actuations; SPST, SPDT, DPST and DPDT. Flat terminal heavy-duty toggle switches meet the standards of today's automotive, marine and industrial applications and are great for electrical connections.
Cooper TWRBR15W-BXSP Tamper Resistant Weatherproof Duplex Receptacle Cooper TWRBR15V Tamper Resistant Weatherproof Duplex Receptacle Cooper C1301-7LTW Lighted Grounding Toggle Switch
Commercial specification-grade straight blade receptacles - tamper-and weather-resistant 15 A - 125 V, NEMA 5-15R. Ensure safety and weather resistance in wet and damp outdoor locations with the ultimate in safety outlet protection. Provides compliance with 2011 NEC Article 406.9 that states that all receptacles installed in wet and damp locations must be weather-resistant. "TR" and "WR" designations provide visual identification. Commercial specification-grade straight blade receptacles 15 A - 125 V, NEMA 5-15R. Ensure safety and weather resistance in wet and damp outdoor locations with the ultimate in safety outlet protection. Tamper-and weather-resistant receptacles. Provides compliance with 2011 NEC Article 406.9 that states that all receptacles installed in wet and damp locations must be weather resistant. "TR" and "WR" designations provide visual identification. Longer, wider strap on toggle lighted switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire.
Cooper C1301-7LTV Lighted Grounding Toggle Switch Arrow Hart CS Grounded Compact Toggle Switch Arrow Hart CS Compact Toggle Switch
Longer, wider strap on toggle lighted switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896.
Arrow Hart CS Grounded Compact Toggle Switch GB-Gardner Bender GSW-33 Canopy Switches Jandorf 61212 Single Circuit Push Button Switch
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Jandorf Switch, 125/250 VAC, 3/6 A, 1 Pole, Switch Functions: On/Off, SPST Contact Configuration, Lead Wire Terminal, Nickel Button
Jandorf 61149 Double Circuit Toggle Switch Jandorf 61156 Toggle Switch Plate Cooper BP4404V Polarized Plug-In Switch
Jandorf Switch, 120/240 V, 10/15 A, 1 Pole, On/Off, SPST Contact Configuration, Screw Terminal, Toggle Actuator On/Off markings. Polarized indoor plug-in switch for lamps, appliances, Christmas lights and other hard to reach applications. 120 VAC, 15 A 120 V rocker switches, 1800 W maximum. On-off, carded. UL listed.
Cooper BP4404W Polarized Plug-In Switch Cooper TWRBR20W-BXSP Tamper Resistant Weatherproof Duplex Receptacle Cooper TWRBR20V Tamper Resistant Weatherproof Duplex Receptacle
Polarized indoor plug-in switch for lamps, appliances, Christmas lights and other hard to reach applications. 120 VAC, 15 A 120 V rocker switches, 1800 W maximum. On-off, carded. UL listed. Commercial specification-grade straight blade receptacles - tamper-and weather-resistant 15 A-125 V, NEMA 5-15R. Ensure safety and weather resistance in wet and damp outdoor locations with the ultimate in safety outlet protection. Provides compliance with 2011 NEC Article 406.9 that states that all receptacles installed in wet and damp locations must be weather-resistant. "TR" and "WR" designations provide visual identification. Commercial specification-grade straight blade receptacles - tamper-and weather-resistant 15 A-125 V, NEMA 5-15R. Ensure safety and weather resistance in wet and damp outdoor locations with the ultimate in safety outlet protection. Provides compliance with 2011 NEC Article 406.9 that states that all receptacles installed in wet and damp locations must be weather-resistant. "TR" and "WR" designations provide visual identification.
Cooper 1301W Framed Non-Grounded Toggle Switch Cooper 1301V Framed Non-Grounded Toggle Switch Cooper 7500 7511V-BOX Decorative Lighted Standard Rocker Switch
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements.
SWITCH TOGGLE SP GROUNDED LA Cooper 1301B Framed Non-Grounded Toggle Switch Jandorf 61028 Plunger Single Circuit Push Button Switch
Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Jandorf Switch, 125 V, 2 A, 1 Pole, Momentary, Switch Functions: Off, SPST Contact Configuration, Tab Terminal
Jandorf 61221 Single Circuit Push Button Switch Jandorf 61112 Double Circuit Toggle Switch Jandorf 61118 Toggle Switch
Jandorf Switch, 250 VAC, 3 A, 1 Pole, Momentary, Switch Functions: Off, SPST Contact Configuration, Lead Wire Terminal, Black Jandorf Switch, 12 VDC, 20 A, 1 Pole, On/Off, SPST Contact Configuration, Tab Terminal, Toggle Actuator, Black Jandorf Switch, 12 VDC, 20 A, Number of Poles: 1, Switch Operation: On/On, Contact Configuration: SPDT, Terminal Type: Tab, Actuator Type: Toggle, Black
Jandorf 61166 Single Circuit Toggle Switch Jandorf 61168 Ball Double Circuit Toggle Switch Jandorf 61310 Toggle Switch
Jandorf Switch, 125/277 V, 15/20 A, 2 hp Wattage, 1 Pole, On/Off/On, SPDT Contact Configuration, Screw Terminal, Toggle Actuator Jandorf Switch, 125/250 V, 3/6 A, 1 Pole, On/Off, SPST Contact Configuration, Lead Wire Terminal, Toggle Actuator Jandorf Switch, 14 VDC, 21 A, 1 Pole, Off/Terminate, SPST Contact Configuration, Tab Terminal, Toggle Actuator
TOGGLE DPDT MOMEN 20A O/OFF/O Jandorf 61214 3-Way Double Circuit Rotary Switch TAP CUBE 1-OUTLET W/ON-OFF SW
Gardner? Bender has a versatile toggle switch family with multiple position configurations. Toggle switches feature flat terminals and are available in four different actuations; SPST, SPDT, DPST and DPDT. Flat terminal heavy-duty toggle switches meet the standards of today's automotive, marine and industrial applications and are great for electrical connections. Jandorf Double Circuit Rotary Switch, 125 V, 3 A, 2 Pole, Brass The PowerZone outlet cube is an energy saver power tap that kills all residual energy. Its illuminated on/off switch indicates when the power is on. Ideal for use with lighting electrical decorations portable fans and other devices that don't have an on/off switch or that draw electricity.
Arrow Hart 1263-BOX Power Receptacle Arrow Hart 1257-SP Grounded Electrical Receptacle Arrow Hart 1234-BOX Grounded Power Receptacle
Commercial power receptacle 30 A, 125 V NEMA TT-30 2-pole/3-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application. Commercial and industrial power receptacles 30 A, 125/250 V NEMA 14-30 3-pole/4-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application. Commercial and industrial power receptacles 30 A, 250 V NEMA 6-30 2-pole/3-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application.
Arrow Hart 1258-SP Grounded Electrical Receptacle Cooper 7500 7511W-BOX Decorative Lighted Standard Rocker Switch Arrow Hart Eagle CS Toggle Switch
Commercial and industrial power receptacles 50 A, 125/250 V NEMA 14-50 3-pole/4-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896.
Arrow Hart CS Compact Toggle Switch Arrow Hart CS Compact Toggle Switch Arrow Hart Eagle CS Lighted Toggle Switch
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896.
Arrow Hart Eagle CS Toggle Switch Arrow Hart Eagle CS Lighted Toggle Switch Arrow Hart TR274 Duplex Combination Switch/Receptacle
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896. Traditional heavy-duty-grade combination switch with receptacle features UL listed tamper-resistant shutters designed to prevent the insertion of foreign objects. TR274 features a neon pilot light which is On when switch is On. Switch is horsepower-rated for motor loads per UL 20. Thermoplastic toggle, top and backbody are virtually unbreakable to deliver years of durable performance. Ultrasonic welding and integrated construction of the strap and body provide excellent ground integrity even under heavy use. Durable, injection molded housings and PVC resin comply with UL94 V0 flammability ratings. Tri-combo screw heads offer greater installation flexibility.
Cooper TR274V Duplex RECEPTACLE/SWITCH COMBO LA Cooper TR274W Duplex
Traditional heavy-duty-grade combination switch with receptacle features UL listed tamper-resistant shutters designed to prevent the insertion of foreign objects. TR274 features a neon pilot light which is on when switch is on. Switch is horsepower-rated for motor loads per UL 20. Thermoplastic toggle, top and back body are virtually unbreakable to deliver years of durable performance. Ultrasonic welding and integrated construction of the strap and body provide superior ground integrity even under heavy use. Durable, injection molded housings and PVC resin comply with UL94 V0 flammability ratings. Tri-combo screw heads offer greater installation flexibility. Traditional heavy-duty-grade combination switch with receptacle features UL listed tamper-resistant shutters designed to prevent the insertion of foreign objects. TR274 features a neon pilot light which is on when switch is on. Switch is horsepower-rated for motor loads per UL 20. Thermoplastic toggle, top and backbody are virtually unbreakable to deliver years of durable performance. Ultrasonic welding and integrated construction of the strap and body provide excellent ground integrity even under heavy use. Durable, injection-molded housings and PVC resin comply with UL94 V0 flammability ratings. Tri-combo screw heads offer greater installation flexibility. Traditional heavy-duty-grade combination switch with receptacle features UL listed tamper-resistant shutters designed to prevent the insertion of foreign objects. TR274 features a neon pilot light which is On when switch is On. Switch is horsepower-rated for motor loads per UL 20. Thermoplastic toggle, top and backbody are virtually unbreakable to deliver years of durable performance. Ultrasonic welding and integrated construction of the strap and body provide excellent ground integrity even under heavy use. Durable, injection molded housings and PVC resin comply with UL94 V0 flammability ratings. Tri-combo screw heads offer greater installation flexibility.
Core React RI06PL-W-K Preset Rotary Dimmer Cooper RI306P-VW-K2 Preset Rotary Dimmer Core React RI06PL-V-K Preset Rotary Dimmer
Rotary dimmers provide a smooth rotation and full range dimming for incandescent lighting. In addition, one fully variable and quiet three-speed fan speed controls are included in the product series. For both residential and commercial use. Stylized knob provides dimming, On/Off control and indication of light level setting. 6 in pre-stripped wire leads. Ground lead provided. Wraparound heat sink dissipates heat and does not require de-rating. 120 VAC, 60 Hz. UL listed. Rotary dimmers provide a smooth rotation and full range dimming for incandescent lighting. In addition, one fully variable and quiet three-speed fan speed controls are included in the product series.
Core React RI06P-VW-K2 Preset Rotary Dimmer Jandorf 61213 Double Circuit Push Button Switch Jandorf 61306 Double Circuit Push Button Switch
Rotary dimmers provide a smooth rotation and full range dimming for incandescent lighting. In addition, one fully variable and quiet three-speed fan speed controls are included in the product series. This line offers 1-pole (single location) units for 600 and 1000 W lamp loads along with a combined 1-pole and 3-way (multi-location) unit for 600 W lamp loads. All React rotary dimmers are compatible with any traditional-style switch, wallplate or screwless wallplate. Jandorf Switch, 125/250 VAC, 3 A, 1 Pole, Switch Functions: Off/L-1/L-2/L1-2, Lead Wire Terminal, Brass Jandorf Switch, 120/240 V, 3/6 A, 1 Pole, Momentary, Switch Functions: Off, SPST Contact Configuration, Screw Terminal, Black
Jandorf 61110 Single Circuit LED Toggle Switch Jandorf 61132 Double Circuit Toggle Switch Jandorf 61135 Double Circuit Toggle Switch
Jandorf Switch, 12 VDC, 20 A, 1 Pole, On/Off, SPST Contact Configuration, Tab Terminal, Toggle Actuator, Red Jandorf Switch, 125/277 V, 10/20 A, 0.75 hp Wattage, 1 Pole, On/Off, SPST Contact Configuration, Screw Terminal, Toggle Actuator Jandorf Switch, 125/250 V, 4/8/10 A, 0.3 hp Wattage, 1 Pole, On/Off, SPST Contact Configuration, Lead Wire Terminal, Toggle Actuator
Jandorf 61148 Double Circuit Toggle Switch Jandorf 61004 Rotary Switch Jandorf 61204 Rotary Switch
Jandorf Switch, 125/277 V, 10/20 A, 1 Pole, On/Off, SPST Contact Configuration, Tab Terminal, Toggle Actuator Jandorf Rotary Switch, 125 V, 3 A, 3 Pole, TPST Contact Configuration, Black Jandorf Rotary Switch, 125 V, 6.5 A, 3 Pole, TPST Contact Configuration, Black
Jandorf 61206 3-Way Double Circuit Rotary Switch Jandorf 61032 Illuminated Single Circuit Rocker Switch Jandorf 61038 Illuminated Single Circuit Rocker Switch
Jandorf Double Circuit Rotary Switch, 125 V, 3 A, 2 Pole, Brass Toggles On/Off. Toggles On/Off.
Jandorf 61104 Mini Single Circuit Rocker Switch Jandorf 61169 Mini Single Circuit Rocker Switch Cooper 1303-7LT Lighted Grounded Toggle Switch
Toggles On/Off. Toggles On/Off. Longer, wider strap on toggle switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installations in both the U.S. and Canada.
Cooper Wiring 277W-BOX Combination Devices Arrow Hart 271 Duplex Grounded Toggle Switch Arrow Hart 271V Duplex Grounding Toggle Switch
Single pole side wire switch. Grounding terminal screw standard. 15 A, 120/277 V rating. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 W - 120 V, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws. Grounding terminal screw standard. Combination switch with additional switch has 120/277 V rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Cooper Wiring 277V-BOX Combination Devices Arrow Hart 271W Duplex Grounding Toggle Switch Jandorf 61010 Long Plunger Single Circuit Push Button Switch
Single pole side wire switch. Grounding terminal screw standard. 15 A, 120/277 V rating. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 W - 120 V, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws. Grounding terminal screw standard. Combination switch with additional switch has 120/277 V rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Jandorf Switch, 125/250 V, 12/16 A, 1 hp Wattage, 1 Pole, Momentary, Switch Functions: On/Off, SPST Contact Configuration, Tab Terminal
Jandorf 61011 Plunger Single Circuit Push Button Switch Jandorf 61027 Plunger Short Push Button Switch Jandorf 61030 Plunger Single Circuit Short Push Button Switch
Jandorf Switch, 125/250 V, 2.5/5 A, 1 Pole, Momentary, Switch Functions: On, SPST Contact Configuration, Tab Terminal Jandorf Switch, 125/250 V, 12/16 A, 1 hp Wattage, 1 Pole, Momentary, Switch Functions: On/Off, SPST Contact Configuration, Tab Terminal Jandorf Switch, 125/250 V, 15/18 A, 0.75 hp Wattage, 1 Pole, Momentary, Switch Functions: On/Off, SPST Contact Configuration, Tab Terminal
Jandorf 61122 Single Circuit Push Button Switch Jandorf 61123 Single Circuit Push Button Switch Jandorf 61203 Double Circuit Push Button Switch
Jandorf Switch, 125/250 V, 10/15 A, 1 Pole, Momentary, Switch Functions: On, SPST Contact Configuration, Screw Terminal, Nickel Button Jandorf Switch, 125/250 V, 16/10 A, 1 Pole, Momentary, Switch Functions: Off, SPST Contact Configuration, Screw Terminal, Black Jandorf Switch, 125/250 VAC, 3 A, 2 Pole, Switch Functions: Off/L-1/L-2/L1-2, Lead Wire Terminal, Nickel Button
Jandorf 61018 Snap-In Toggle Switch Jandorf 61140 Single Circuit Toggle Switch Jandorf 61005 Single Circuit Rotary Switch
Jandorf Switch, 125/250 V, 10/20 A, 0.5 hp Wattage, 1 Pole, On/Off, SPST Contact Configuration, Screw Terminal, Toggle Actuator, White Jandorf Switch, 125/277 V, 15/20 A, 2 hp Wattage, 1 Pole, On/Off/On, SPDT Contact Configuration, Tab Terminal, Toggle Actuator Jandorf Single Circuit Rotary Switch, 125 V, 6.5 A, 1 Pole, TPST Contact Configuration, Black
Jandorf 61008 Square Rocker Switch Jandorf 61013 Single Circuit Square Rocker Switch Jandorf 61101 Single Circuit Rocker Switch
Jandorf Rocker Switch, 250 V, 5 A, SPST Contact Configuration, Tab Terminal Jandorf Rocker Switch, 250 V, 5 A, SPST Contact Configuration, Tab Terminal Jandorf Rocker Switch, 125/250 VAC, 14 VDC, 10/16/20/21 A, 0.75 hp Wattage, SPDT Contact Configuration, Tab Terminal
Jandorf 61314 Single Circuit Rocker Switch With Lock Out Arrow Hart AH8300V Duplex Receptacle Arrow Hart AH8300RD Duplex Receptacle
Toggles On/Off. Hospital specification-grade straight blade receptacles - premium back wire & side wire. Arrow Hart's feature rich line of hospital-grade receptacles have been designed to meet and exceed the demanding requirements of UL 498 and Federal Specification WC-596 to provide a consistent means of connectivity where downtime can be critical. Arrow Hart's feature rich line of hospital-grade receptacles have been designed to meet and exceed the demanding requirements of UL 498 and Federal Specification WC-596 to provide a consistent means of connectivity where downtime can be critical.
Arrow Hart AH8300W Duplex Receptacle Arrow Hart 1254-BOX Grounded Power Receptacle Cooper 7500 C7501W-SP-L Grounded Standard Rocker Switch
Arrow Hart's feature rich line of Hospital Grade receptacles have been designed to meet and exceed the demanding requirements of UL 498 and Federal Specification WC-596 to provide a consistent means of connectivity where downtime can be critical. Commercial and industrial power receptacles 50 A, 250 V NEMA 6-50 2-pole/3-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded.
Cooper 7500 C7501V-SP Decorative Grounded Standard Rocker Switch Cooper C1303-7LTW-L Lighted Grounding Toggle Switch Cooper C1303-7LTV-L Lighted Grounding Toggle Switch
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded. Longer, wider strap on toggle lighted switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Longer, wider strap on toggle lighted switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire.
Cooper 1242-7 Framed Grounded Toggle Switch Cooper 1242-7 Framed Grounded Toggle Switch Cooper 1242-7 Framed Grounded Toggle Switch
Industrial design cam action mechanism insures quiet switch action. 120/277 volt rating ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Accepts up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Meets all UL 20 requirements, NOM certified. Longer, wider strap on toggle switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Longer, wider strap on toggle switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installations in both the U.S. and Canada.
SWITCH QUIET TOGGLE 4WAY Jandorf 61001 Plunger Single Circuit Push Button Switch Jandorf 61012 Plunger Single Circuit Push Button Switch
Longer, wider strap on toggle switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call backs due to job site breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installations in both the U.S. and Canada. Jandorf Switch, 125/250 V, 0.25/0.75 A, 1 Pole, Momentary, Switch Functions: Off, SPST Contact Configuration, Screw Terminal Jandorf Switch, 250 V, 0.2 A, 1 Pole, Momentary, Switch Functions: On, SPST Contact Configuration, Tab Terminal
Jandorf 61029 Plunger Single Circuit Push Button Switch Jandorf 61031 Long Plunger Single Circuit Push Button Switch Jandorf 61130 Double Circuit Toggle Switch
Jandorf Switch, 125/250 V, 0.25/0.75/1 A, 1 Pole, Momentary, Switch Functions: On, SPST Contact Configuration, Tab Terminal Jandorf Switch, 125/250 V, 21 A, 1.5 to 2 hp Wattage, 1 Pole, Momentary, Switch Functions: On/Off, SPST Contact Configuration, Tab Terminal Jandorf Switch, 125/277 V, 15/20 A, 2 hp Wattage, 2 Pole, On/Off, DPST Contact Configuration, Screw Terminal, Toggle Actuator
Jandorf 61131 Double Circuit Toggle Switch Jandorf 61136 Double Circuit Toggle Switch Jandorf 61137 Toggle Switch
Jandorf Switch, 125/277 V, 15/20 A, 2 hp Wattage, 2 Pole, On/Off, DPST Contact Configuration, Tab Terminal, Toggle Actuator Jandorf Switch, 125/277 V, 15/20 A, 2 hp Wattage, 2 Pole, On/Off/On, DPDT Contact Configuration, Screw Terminal, Toggle Actuator Jandorf Switch, 125/277 V, 15/20 A, 2 hp Wattage, 2 Pole, On/Off/On, DPDT Contact Configuration, Tab Terminal, Toggle Actuator
Jandorf 61161 Toggle Switch Boot Jandorf 61033 Single Circuit Rotary Switch Jandorf 61034 Single Circuit Rotary Switch
Jandorf Toggle Switch Boot, Specifications: 15/32-32NS-2B Thread Jandorf Single Circuit Rotary Switch, 125 V, 1 A, 1 Pole, SPDT Contact Configuration, Plastic, Black Jandorf Single Circuit Rotary Switch, 125 V, 1 A, 1 Pole, SPTT Contact Configuration, Plastic, Black
Jandorf 61006 Power Indicators Jandorf 61124 Double Circuit Rocker Switch Jandorf 61126 Curvette Illuminated Single Circuit Rocker Switch
Jandorf High-Profile Snap-In Pilot Light Toggles On/Off. Toggles On/Off.
Cooper 7500 C7511W-SP-L Lighted Standard Rocker Switch Cooper 7513W-BOX Decorative Lighted Standard Rocker Switch Cooper Wiring BP460-SP-L Canopy Switches
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements. UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4 in. With end bell.
Jandorf 61036 Single Circuit Push Button Switch Jandorf 61037 Plunger Single Circuit Push Button Switch Jandorf 61120 Single Circuit Push Button Switch
Jandorf Switch, 125/250 V, 5/10 A, 0.25 hp Wattage, 1 Pole, Switch Functions: On/Off, SPST Contact Configuration, Lead Wire Terminal, Nickel Button Jandorf Switch, 125/250 V, 0.25/0.75 A, 1 Pole, Momentary, Switch Functions: On, SPST Contact Configuration, Screw Terminal Jandorf Switch, 125/250 V, 10/15 A, 1 Pole, Momentary, Switch Functions: Off, SPST Contact Configuration, Tab Terminal, Nickel Button
Jandorf 61121 Single Circuit Push Button Switch Jandorf 61154 Single Circuit Toggle Switch GFCI TAMPER RESIS ST WHITE 15A
Jandorf Switch, 125/250 V, 10/15 A, 1 Pole, Momentary, Switch Functions: On, SPST Contact Configuration, Tab Terminal, Nickel Button Jandorf Switch, 125/250 V, 10/15 A, Number of Poles: 1, Switch Operation: Normally Off, Contact Configuration: SPST, Terminal Type: Screw, Actuator Type: Toggle Genmax GFCI Receptacle/Outlet, Self-Test, 15 A, Copper, White
GFCI TAMPER RESIS ST IVORY 15A Arrow Hart 1212 Grounded Electrical Receptacle Arrow Hart 1225 Grounded Electrical Receptacle
Genmax GFCI Receptacle, 15 A, Ivory Commercial and industrial power receptacles 50 A, 125/250 V NEMA 14-50 3-pole/4-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application. Commercial and industrial power receptacles 30 A, 125/250 V NEMA 14-30 3-pole/4-wire. Heavy-duty design and construction make Arrow Hart power devices ideal for any high amperage industrial or commercial power connectivity application.
   
 
1 2