|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vacmaster Filter, Frame Material: Foam, Suitable for: Vacmaster VQ407S Wet/Dry Vacuums, Shop-Vac 5 to 16 Gallon Wet/Dry Vacuums
|
Vacmaster Crevice Tool, Dimensions: 8 in W, Suitable for: 1-1/4 in Vacmaster Hose Systems
|
Shop-Vac Extension Wand, Wet/Dry, Plastic, Black, Dimensions: 1-1/4 in Dia x 14 in L, Suitable for: 1-1/4 in Hose
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop-Vac Reusable Dry Filter Disc, Suitable for: 337-592, 739-337, 344-694, 148-070, 199-498, 199-499, 199-501, 199-503, 199-504, 199-500, 199-506 Filters, Includes: (3) Reusable Dry Filter Discs
|
Shop-Vac Small Foam Sleeve, 6-1/2 in Height, 8 in Diameter, Suitable for: Shop-Vac Brand 1 to 4 gal Wet Dry Vacuums, 5 gal Portable Model H87S, 5 gal Hang-Up, 5 gal Wall Mount and 6 gal Long Life Model P12S Vacuums
|
Vacmaster Utility Nozzle, Suitable for: Vacmaster 1-1/4 in Hose Systems
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vacmaster Dusting Brush, Block Material: Plastic, Dimensions: 7 in W, Suitable for: 1-1/4 in Vacmaster Hose Systems
|
Shop-Vac Filter Bag, 1 to 1.5 gal Capacity, Suitable for: 1.5 and 1 gal Micro Vacuums
|
Shop-Vac Gulper Car Nozzle, Specifications: 1-1/4 in Connection Size
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vacmaster Floor/Squeegee Nozzle, Plastic, Black, Dimensions: 16 in W, Suitable for: 1-1/4 in Vacmaster Hose Systems
|
Shop-Vac Filter Bag, 2 to 2.5 gal Capacity, White, 11-1/2 in Length, 7 in Width, Suitable for: Model QAM70 Vacuum Cleaner, 2 -2.5 gal Vacuums
|
Vacmaster Crevice Tool, Dimensions: 8 in W, Suitable for: 2-1/2 in Vacmaster Hose Systems
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For everyday household use, for vacuuming household dirt and debris and sawdust. Fits Vacmaster 1.5 to 3.2 gal wet or dry Vacuums. Fits most Armor All? wet or dry Vacs.
|
Our hose to drain adapter kit allows a standard 5/8 in water hose to attach to the drain cap for easy drainage of liquid debris away from the source. The large drain cap is compatible with our 6, 9 and 12 gal wet/dry vacuums (0910, 0920, 0930). The smaller cap can be removed to attach a water hose. It also allows for a smaller diameter drain, making debris disposal less messy, helping avoid splashing. The gasket inside the drain cap prevents leaking even when the vacuum tank is full. The Milwaukee? vacuum hose to drain adapter kit includes two attachable pieces.
|
Shop-Vac Filter Bag, Suitable for: 5 to 8 US gal Vacs with the Inlet Located on the Tank
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 1-7/8 in floor utility nozzle makes cleaning up larger areas faster. The nozzle is designed for you to clean in wider paths on all surface types, saving time and increasing efficiency. The bevels on either side of the nozzle ensure this vacuum nozzle won't get stuck to surfaces and allow it to glide more easily in a rocking motion. The gray color indication ring allows for quick size identification of its 1-7/8 in Dia. This floor utility nozzle is compatible with Milwaukee? 1-7/8 in vacuum hoses (49-90-1996, 49-90-1984, 49-90-1986) and other 1-7/8 in Dia vacuum hoses.
|
Our 1-7/8 in crevice tool is designed to access tight areas and makes cleaning around edges easier. The vacuum crevice tool allows you to clean hard-to-reach areas where other vacuum attachments will not fit. The gray color indication ring allows for quick size identification of its 1-7/8 in Dia. This crevice tool is compatible with MILWAUKEE? 1-7/8 in vacuum hoses (49-90-1996, 49-90-1984, 49-90-1986) and other 1-7/8 in Dia vacuum hoses.
|
Our hose and accessory adapter kit allows Milwaukee hoses to connect to the most common vacuum accessory and hose sizes. The kit includes three pieces 2-1/2 to 1-7/8 in accessory adapter, 2-1/2 to 2-1/2 in - 1-7/8 in hose adapter and a 1-7/8 to 1-7/8 in hose adapter. These step adapters allow you to connect different diameter Milwaukee? vacuum hoses and accessories. Each adapter is marked with the diameters it connects between directly on the tool for easy identification.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop-Vac Micro Cleaning Kit, Specifications: Fits 1-1/4 in Dia Hose, Poly Pro Plastic, 6 Piece, Includes: Crevice Tool, Curved Wand, Oval Round Brush, Reduction Nozzle, Straight Round Brush and Straight Wand
|
Shop-Vac Universal Cloth Filter Bag, Dacron, Suitable for: Shop-Vac 2036000, 2030400, 9650600, 9650800, 9651000, 9651200, 9651400, 9650900, 9689400, 9633400 and 9551800 Wet Dry Vacuums
|
Vacmaster Filter Bag, 5 to 6 gal, 14.96 in L, 13.78 in W, 0.39 in Thick, Suitable for: Vacmaster VJ507, VJ607, VJ607-1, VJC507P, VJC607PF 0101 Wet/Dry Vacs, Vacmaster Professional Beast Series VFB511B 0201 Wet/Dry Vacs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement filter for ash vac model PAVC101 (SKU no 509.4016). Two-layer, heat-resistant filter traps the finest dust and ash.
|
Our 1-7/8 in curved nozzle makes cleaning more efficient and comfortable. The ergonomic grip provides you with easier handheld cleaning along flat or uneven surfaces. The angled nozzle delivers better cleaning efficiency than other vacuum accessories ends. The gray color indication ring allows for quick size identification of its 1-7/8 in Dia. This curved vacuum nozzle is compatible with Milwaukee? 1-7/8 in vacuum hoses (49-90-1996, 49-90-1984, 49-90-1986) and other 1-7/8 in Dia vacuum hoses.
|
Our 1-7/8 in extension wand allows for much easier cleaning in an upright position. With a length of 19-1/2 in, connecting two makes cleanup easier while still allowing for easy storage. These vacuum extension wands provide you with greater reach when cleaning in any application. The gray color indication ring allows for quick size identification of its 1-7/8 in Dia. This vacuum hose extension wand is compatible with Milwaukee? 1-7/8 in vacuum hoses (49-90-1996, 49-90-1984, 49-90-1986) and other 1-7/8 in Dia vacuum hoses.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our AIR-TIP? cross brush tool makes cleaning easier with a cross design that prevents brushes from pushing debris away, eliminating clogging. The cross brush tool can agitate, release and clean hard to get material from surfaces. The vacuum bristle brush will not mar or scratch surfaces, allowing you to clean quickly without causing damage to finished surfaces. The Milwaukee AIR-TIP? cross brush tool is compatible with other wet or dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of our AIR-TIP? family of trade focused vacuum accessories.
|
Shop-Vac Crevice Tool, Flexible, 1-1/4 in Connection
|
The MILWAUKEE? 1-7/8 in round brush tool makes cleaning easier by agitating, releasing and cleaning hard-to-get material from surfaces. The soft bristles will not mar or scratch surfaces, allowing you to clean quickly without causing damage to finished surfaces. The gray color indication ring allows for quick size identification of its 1-7/8 in Dia. This round vacuum cleaner brush is compatible with Milwaukee 1-7/8 in vacuum hoses (49-90-1996, 49-90-1984, 49-90-1986) and other 1-7/8 in Dia vacuum hoses.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop-Vac Filter Bag, Suitable for: 5 to 8 gal Vacuums
|
Shop-Vac Right Angle Brush, Dimensions: 2-1/4 in Dia, Suitable for: 2-1/4 in Dia Hoses
|
Shop-Vac Claw Utility Nozzle, Specifications: 1-1/4 in Size, Plastic, Black, Suitable for: Shop-Vac 1-1/4, 1-1/2, 2-1/2 in Hose Ends
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vacmaster Extension Wand, Plastic, Black, Dimensions: 2-1/2 in Dia x 20 in L, Suitable for: 2-1/2 in Vacmaster Hose Systems
|
Vacmaster Car Claw Nozzle with Adapter, Plastic, Black, Dimensions: 8 in W, Suitable for: 1-1/4, 2-1/2 in Vacmaster Hose Systems
|
Vacmaster Cartridge Filter and Retainer, Frame Material: Polyester, White, 9 in W, Suitable for: Shop-Vac Wet or Dry Vacuum Cleaners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop-Vac Filter Bag, 10 to 14 gal Capacity, Suitable for: 10 to 14 gal Vacuums
|
Our 1-7/8 in wet floor nozzle is the ideal tool to use during wet mess clean-up. The angled squeegee underneath the vacuum nozzle quickly funnels and removes water from flat surfaces. The vacuum squeegee attachment makes cleaning spills and other wet mess hazards easier for you when connected to an extension wand. The gray color indication ring allows for quick size identification of its 1-7/8 in Dia. This wet floor nozzle is compatible with Milwaukee? 1-7/8 in vacuum hoses (49-90-1996, 49-90-1984, 49-90-1986) and other 1-7/8 in Dia vacuum hoses.
|
Our AIR-TIP? 3-in-1 crevice and brush tool can easily be used in all areas of the jobsite. Its reversible brush head and overall tool length make tackling different cleaning applications easy. The reversible brush head has two sides, a long or soft bristle side for delicate cleaning and a short or stiff bristle side for more agitation. You can easily slide it to the tip of the tool for quick use. You can also remove the brush head to reach tighter areas with its long crevice tool design. The Milwaukee AIR-TIP? 3-in-1 crevice and brush tool is compatible with other wet or dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vacmaster Filter Bag, 8 to 10 gal, Paper, Suitable for: Vacmaster 8 to 10 gal Wet/Dry Vacs
|
Our 1-7/8 in floor brush tool makes cleaning faster by agitating, releasing and cleaning hard-to-get material from flat surfaces. The bristles will not mar or scratch surfaces, allowing you to clean quickly and effectively without causing damage to finished surfaces. The floor brush tool has reversible bristles, allowing you to clean more effectively in either forward or backward strokes. The gray color indication ring allows for quick size identification of its 1-7/8 in Dia. This vacuum floor brush attachment is compatible with MILWAUKEE? 1-7/8 in vacuum hoses (49-90-1996, 49-90-1984, 49-90-1986) and other 1-7/8 in Dia vacuum hoses.
|
Shop-Vac Vacuum Hose, 1-1/4 in OD, Black, 4 ft Length, Suitable for: 1 x 1 Vacuum and Mighty Mini 2000 Vacuum
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vacmaster VBV1010PF is a unique 2-in-1 unit that allows users to switch between a wet, dry vacuum and a high powered, handheld blower with the push of a button. This 10 gal wet, dry vac is the perfect size for a variety of tasks around the home or shop. With a 4 peak HP motor this vacuum makes cleanup easy, whether it's dust collection in the shop or liquid spills at home. Turning this vac into a detached, handheld blower to tidy up the yard or garage could not be easier simply push the release button and lift the blower out of its cradle. With a blowing speed of 210 mph, this tool can handle the toughest debris. The balanced top handle design and durable casters provide stable transportation during and after use and the on-board accessory storage ensures that all of your tools stay organized and in one place.
|
Shop-Vac Filter Bag, 15 to 22 gal Capacity, Suitable for: 15 to 22 gal Vacuums
|
Vacmaster High-Efficiency Dust Filter Bag, 5 to 6 gal Capacity, Suitable for: Vacmaster VJ507, VJ607, VJ607-1, VJC507P, VJC607PF 0101, VOC507PF, VOC507S, VOC507S 1001, VQ607SFD, Vacmaster Professional Beast Series VFB511B 0201, Shop-Vac 5 to 6 gal Wet/Dry Vacuum Cleaners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop-Vac Filter Bag, 10 to 14 gal Capacity, Suitable for: 10 to 14 gal Vacuums
|
Our foam wet filter is optimized for wet pick-up applications. The foam material allows water through but deflects and stops debris from getting into the motor. This protects the motor from debris and increases the tool's life. This washable vacuum filter is reusable and compatible with Milwaukee? wet/dry vacuums 0880-20, 0960-20 and 0970-20.
|
Our 1-7/8 in dust extraction adapter kit allows our 1-7/8 in hoses to connect to most power tools for dust collection directly from the tool. The dust extraction kit includes three adapters for multiple different uses and tool fitment. The hose clip adapter screws onto the end of the hose and connects directly to Milwaukee power tools or the other two adapters. The power tool adapter clips into the hose clip adapter and provides a friction fit to most power tool dust ports. The table saw adapter clips into the hose clip adapter and provides a secure connection to 2-1/2 in table saw dust ports. The MILWAUKEE? 1-7/8 in dust extraction adapter kit includes a gray color ring for quick identification of its 1-7/8 in Dia.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our AIR-TIP? 2-in-1 utility brush tool can clean multiple surfaces with easy an access sliding brush. The sliding brush can be easily deployed with a click of a button to protect delicate surfaces or agitate debris when needed. Sliding back the brush head allows for additional cleaning versatility when you need more suction or no bristles. The Milwaukee AIR-TIP? 2-in-1 utility brush tool is compatible with other wet or dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
Our AIR-TIP? flexible long reach crevice tool gets into hard-to-reach places with a flexible rubber shaft design. The flexible rubber shaft can bend along the crevice tool to reach into difficult, awkward cleaning situations. The long crevice tool has a flexible shaft over 16 in in length, making it easier for you to clean in tight areas. The MILWAUKEE? AIR-TIP? long reach crevice tool is compatible with other wet or dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
Our AIR-TIP? pivoting extension wand provides greater cleaning access overhead and below with a pivoting 90 deg joint. At the click of a button, the extension wand can pivot 90 deg to create an easier cleaning experience in situations overhead or below. The joint locks into place and ensures you can place additional 1-1/4 in vacuum accessories on the end of the extension wand. The Milwaukee AIR-TIP? pivoting extension wand is compatible with other wet or dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our AIR-TIP? rocking utility nozzle with brushes makes handheld cleanup easier. The bevels on either side of the nozzle and brushes all around the tool ensure it won't get stuck to surfaces when you clean in a rocking motion. The bristles can be used in finished areas or when agitating debris for removal. The Milwaukee AIR-TIP? rocking utility nozzle with brushes is compatible with other wet or dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of our AIR-TIP? family of trade focused vacuum accessories.
|
Our AIR-TIP? Claw Utility Nozzle w/ Brushes makes handheld cleanup more effective with its ergonomic claw grip and integrated brushes that agitate debris. The claw grip design, combined with bristles on the nozzle end, gives you more cleaning leverage to agitate debris. The bristles are safe to use on finished areas to avoid marring the surface. The MILWAUKEE? AIR-TIP? Claw Utility Nozzle with Brushes is compatible with other wet/dry vacuum brands with 1-1/4 , 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
Vacmaster Hose with Adapter, 1-1/4 in ID, Plastic, Black, 6 ft Length, Suitable for: Most Vacmaster 1-1/4 in Hose Systems
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vacmaster Floor Brush, Plastic Bristle, Black, 14.6 in L Bristle, Bristle Width: 5.9 in, Suitable for: Vacmaster 2-1/2 in Hose Systems
|
For everyday household use, for vacuuming household dirt and debris and sawdust. For dry pick-up only. Fits most Vacmaster wet or dry vacs 12 to 16 gal. Fits most Shop-Vac? wet or dry vacuum cleaners (12 to 14 gal).
|
Our AIR-TIP? rotating corner brush tool easily goes into corners with its spade-shaped tip for deep corner cleaning. The agitating brushes on the tip allow you to easily remove debris in stubborn corners. The 360 deg rotating brush head enhances the cleaning experience when pushing or pulling in challenging areas like elevated inside corners. The Milwaukee AIR-TIP? rotating corner brush tool is compatible with other wet or dry vacuum brands that include 1-1/4, 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extremely tear-resistant, high dust retention. Makes it possible to vacuum significantly longer than with paper filter bags.
|
Shop-Vac High-Efficiency Disposable Filter Bag, 15 to 22 gal Capacity
|
Shop-Vac Hose with Air Flow Control, 1-1/4 in OD, 8 ft Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our fleece dust bags are compatible with the Milwaukee? M12 FUEL? 1.6 gal wet or dry vacuum and the M18 FUEL? PACKOUT? 2.5 gal wet or dry vacuum. These disposable fleece dust bags are ideal for fine dust collection. The vacuum bags are fully enclosed and act as a pre-filter to prolong filter life and are easy for you to dispose of. This kit includes three fleece dust bags and the bag attachment for 0960-20 vacuum.
|
The Milwaukee? SDS Plus DUST TRAP? is the industry's first OSHA? compliance solution without a vacuum, ideal for overhead drilling applications. The universal fit allows the DUST TRAP? to work with all SDS Plus rotary hammers and SDS Plus drill bits up to an 8 in length, including stop bits and other anchor installations tools. The clear sleeve allows visibility while the locking mechanism enables easy storage on the jobsite. The compact, collapsible design is ideal for tough to reach places, providing superior productivity. The DUST TRAP? is OSHA? objective data compliance solution when used without a vacuum and OSHA? Table 1 compliant when used with a dust extractor, giving users the flexibility to adjust to the daily demands of the jobsite while being compliant. Replacement SDS+ DUST TRAP? Sleeves are available (48-03-3235).
|
Vacmaster High-Efficiency Dust Filter Bag, 12 to 16 gal Capacity, Suitable for: Vacmaster 12 to 16 gal, Shop-Vac 12 to 14 gal Wet/Dry Vacuum Cleaners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop-Vac Vacuum Hose, 2-1/2 in OD, 225 psi Pressure, Plastic, Black, 8 ft Length, Suitable for: 2-1/2 in Standard Friction or Locking Inlets Vacuums
|
Our large wet or dry vacuum foam wet filter is optimized for wet pickup applications. It is compatible with multiple Milwaukee wet or dry vacs (0910, 0920, 0930, 0931). The foam material allows water through but deflects and stops debris from getting into the motor, protecting the motor from debris and increasing the tool life. You can quickly swap or clean filters with the easy access quarter-turn design. The MILWAUKEE? large wet or dry vacuum foam wet filter is dry cleanable and washable with water when necessary.
|
Our AIR-TIP? non-marring utility nozzle kit has non-marring edges to protect surfaces from getting marred when cleaning. A specialized resin allows each tip to be used on finished surfaces without marking up the area. The vacuum accessory kit includes a crevice tool and utility nozzle, which both have non-marring edges indicated by the black surface. The Milwaukee? AIR-TIP? non-marring utility nozzle kit is compatible with other wet/dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of our AIR-TIP? family of trade focused vacuum accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our AIR-TIP? 4-in-1 right angle cleaning tool can reach around obstacles with its right-angle design. The gradual bend and right-angle design can be used around pipes, near walls and tight access cleaning situations. The 4-in-1 right angle cleaning tool has four different interchangeable tips for more cleaning versatility, including short crevice, bottom-opening, brushed and long crevice tips. You can easily store each with the included tip holder. The Milwaukee? AIR-TIP? 4-in-1 right angle cleaning tool is compatible with other wet/dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
The Shop-Vac 8 ft x 1-1/2 in Dia hose fits vacuums with a 2-1/2 in Dia standard friction or locking inlets.
|
Our large wet or dry vacuum high-efficiency filter is compatible with multiple Milwaukee wet or dry vacuums (0910, 0920, 0930, 0931). An installed high-efficiency filter captures 99% of all particles greater than 0.5 um for fine dust collection, ensuring dust and micro particle collection of debris such as sawdust, drywall dust and wood or metal shavings. You can quickly swap or clean filters with the easy access quarter-turn design. The MILWAUKEE? large wet or dry vacuum high-efficiency filter is dry cleanable and washable with water when necessary.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our AIR-TIP? low-profile pivoting brush tool has greater cleaning access in a variety of cleaning situations with its pivoting design and low-profile head. The pivoting joint is easy to engage with a button press, so multiple orientations of cleaning overhead, waist-level, or below can be achieved. In addition, you can swivel the low-profile brush head 360 deg for even more cleaning versatility. The MILWAUKEE? AIR-TIP? low-profile pivoting brush tool is compatible with other wet or dry vacuum brands with 1-1/4 , 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
Our AIR-TIP? magnetic utility nozzle has integrated magnets that catch metal hardware, preventing damage to bags and filters inside of a wet/dry vacuum. The magnetic strips are located on the front and back of the vacuum tool to catch metal hardware before it gets inside the vacuum. The black zinc coating on the magnets prevents rust long-term. The Milwaukee? AIR-TIP? magnetic utility nozzle is compatible with other wet/dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
Vacmaster Hose with Adapter, 2-1/2 in Dia Outside, Plastic, Black, 7 ft L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop-Vac Crevice Tool, 1-1/4 in Connection
|
Shop-Vac Cartridge Filter, 6-1/2 in H, 8 in Dia, Suitable for: Shop-Vac Wet or Dry Vacuums 5 gal and Above
|
Lightweight, compact and portable, this Armor All? wet/dry vacuum is the perfect tool for quick clean-ups. It easily vacuums dry debris and liquids around the house, workshop or car. The included attachments will help tackle hard to reach places on a variety of surfaces. When clean-up is done, most accessories can be stored on the vacuum, which can then easily be stored on the wall thanks to the included wall mount bracket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop-Vac Wet Pick-Up Foam Filter Sleeve
|
Our fleece dust bags are compatible with the MILWAUKEE? M18 FUEL? 6 gal wet or dry vacuum. With 98.5% filter efficiency, these disposable fleece dust bags are ideal for fine dust collection. The vacuum cleaner dust bags are fully enclosed and act as a pre-filter to prolong filter life and are easy to dispose of with the pull tab to prevent dust from escaping.
|
Our AIR-TIP? swiveling palm brush enhances your cleaning experience with its swiveling grip for easier movement. An ergonomically designed 360 deg swiveling palm grip allows you to create more cleaning leverage and freedom of movement when needed most. This swivel vacuum brush comes with three interchangeable heads for more cleaning options. The rubber bristle head is optimized for cleaning automotive carpet and collecting stubborn debris. The stiff brush head allows for deep cleaning agitation of debris, and the soft bristle head is for cleaning more delicate surfaces. The compact and hangable storage bag ensures any loose bristle heads stay in place. The MILWAUKEE? AIR-TIP? swiveling palm brush is compatible with other wet/dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our AIR-TIP? long reach flexible micro hose set reaches where most vacuum tools cannot go with five interchangeable hose lengths and diameters for many hard to reach spaces. You can install a different hose tube based on your cleaning needs with a quick quarter-turn. The Milwaukee AIR-TIP? long reach flexible micro hose set is compatible with other wet or dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of our AIR-TIP? family of trade focused vacuum accessories.
|
Shop-Vac Vacuum Brush, Dimensions: 1-1/4 in Dia, Suitable for: 1-1/4 in Dia Hoses
|
Shop-Vac Wet/Dry Vacuum, Portable, 120 VAC, 6 A, 1 hp, Vacuum Capacity: 1 gal, Air Flow Rate: 50 cfm, Filter Type: Disposable, Inlet Connection Size: 1-1/4 in, Hose Length: 4 ft, Cord Length: 6 ft, Housing Material: Plastic, Housing Color: Black, Includes: Blower Nozzles, Concentrator Nozzles, Crevice Tool, Gulper Nozzles, Multi-Purpose Nozzles, Wall-Mounting Bracket and Wall-Mounting Tool Holder
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our fleece dust bags are compatible with the Milwaukee M18 FUEL? 9 gal wet or dry vacuum. With 98.5% filter efficiency, these disposable fleece dust bags are ideal for fine dust collection. The vacuum cleaner dust bags are fully enclosed and act as a pre-filter to prolong filter life and are easy to dispose of with the pull tab to prevent dust from escaping.
|
Shop-Vac Cartridge Filter, 6-1/2 in Diameter, Suitable for: Shop-Vac Wet or Dry Vacuums 5 gal and Above
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Milwaukee? 49-90-1955 fleece dust bag is compatible with the Milwaukee? 8 gal dust extractor (8960-20) to capture fine dust. The fleece bag is fully enclosed and acts a pre-filter which will prolong the life of the main filter and minimize dust exposure during disposal.
|
Our AIR-TIP? dust collector collects dust as you work with its rubber seal that maintains suction to a wall for less cleanup time later. After connecting the dust collector to a wet/dry vacuum, it uses the vacuum's suction so you can attach it to a wall for hands-free work. You can cut or drill above the funnel design while the vacuum is on to capture more debris. The rubber seal maintains suction throughout the application so you can put less dust in the air, on the ground and free up a hand that would otherwise be holding a vacuum nozzle. The Milwaukee AIR-TIP? dust collector is compatible with other wet/dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in Dia and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
This portable Armor All utility vac is specifically designed to clean the interior of your car and handles both wet and dry pickup. Includes all accessories for complete interior cleaning and easily converts to a blower to dry motorcycles, car grills and wheels. It also has an automatic shut-off to prevent overflow and a built-in air and noise diffuser for efficient and quiet operation. It also features a 10 ft power cord with cord wrap, on-board accessory, hose storage and a dust sealed switch. It includes a 6 ft x 1-1/4 in hose, reusable foam filter sleeve, 2-in-1 utility nozzle, crevice tool, blower nozzle/adapter, deluxe car nozzle and a car detail brush.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Shop-Vac? 2.5 gal 2.5 peak hp wet and dry vacuum is lightweight and portable. It is great for quick wet or dry pick up jobs in your home, garage, workshop or vehicle. Attach the hose to the rear blower port to blow dirt out from those hard to reach places.
|
Replacement fleece filter bag for VAC series 14 gal dust extractors. Filter bags act as a primary filter, capturing large pieces of debris and increasing the life of the main filter. Using a filter bag is the most efficient way to dispose of the captured dust and debris. Each filter bag comes with a port cover which securely closes opening of the filter bag and keeps the dust and debris inside during the disposal process.
|
Powered by a strong 3 peak hp motor, this is an ideal compact wet/dry vac for the home. Conveniently store and maneuver this 5 gal shop vacuum with the balanced top handle and on-board storage. Picks up dry debris and liquid messes with ease, it even converts to a blower. Features an 8 ft power cord with cord wrap, on-board accessory storage, 360 deg swivel casters and 6 ft x 1-1/4 in locking hose. It includes a noise diffuser, three extension wands, 2-in-1 utility nozzle, re-usable foam filter and a floor brush/squeegee nozzle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Milwaukee? 49-40-6110 cutting dust shroud provides users with a solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). The 49-40-6110 is optimized for cutting applications with both AC and DC Milwaukee? small angle grinders.
|
Our 1-7/8 in x 9 ft flexible hose delivers unmatched durability and flexibility to survive the jobsite. Its two-part design allows for durable and crush-resistant construction to prevent tears that lead to downtime on the jobsite. The anti-static hose material helps prevent static buildup when cleaning fine particles. The high-performance swivel mechanism and hose material create more flexibility and ease of use during cleaning, preventing the hose from getting bound up or kinked while you move around. The dedicated custom rubber gasket improves airflow and performance when in use. This Milwaukee flexible vacuum hose has a gray color ring for quick identification of its 1-7/8 in Dia.
|
The HDC200 is a flexible dust-collection attachment for SDS-plus? and SDS-max? hammers for drilling into concrete. It is optimized for drilling diameters from 5/8 to 1-3/8 in but can accommodate up to 2-1/2 in if the brush ring is removed. The attachment features two unique air chambers, one allows the drilling bit to pass through when drilling into the work surface. The second air chamber is designed to maintain suction to the wall during the drilling application. The dust port is designed for Bosch 1-3/8 in vacuum nozzle but can be used with either 1-1/4 in or 2 in vacuum nozzles when used with the appropriate adapter. The system is universal and is designed to connect to a vacuum so that it can be used with any size hammer and can accommodate the full range of drill bit diameters and drilling depth.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The MILWAUKEE? 49-40-6101 surface grinding dust shroud provides users with a solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). The 49-40-6101 is optimized for surface grinding applications with both AC and DC MILWAUKEE? small angle grinders. Attach to the MILWAUKEE? 8960-20 8 gal dust extractor for a complete table 1 OSHA compliant solution.
|
Milwaukee? SDS max dust extraction attachment provides users with a solution for the regulation on respirable crystalline dust (29 CFR 1926.1153). The attachment is optimized for all drilling depths and any hole ranging from 1/4 and 2-3/4 in Dia. Its removable brush rings allows for increased tool life when performing larger dry coring applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleanup is a breeze with the new AV15 ash vacuum from USSC. With a 2 hp peak motor and a 6 gal capacity, you can easily shorten your maintenance time.
|
Shop-Vac Wet/Dry Vacuum, 3.5 hp, Vacuum Capacity: 6 gal, Filter Type: Cartridge, Dry, Foam Sleeve, Cord Length: 6 ft, Housing Color: Black, Dimensions: 13-3/4 x 13-3/4 x 22-1/4 in, Includes: Crevice Tool, Extension Wands, Filter Disc, Floor Nozzle, Foam Filter Sleeve, Dry Collection Bag, Gulper Nozzle and Hose
|
Milwaukee Main Filter, Suitable for: 8 gal Dust Extractor
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vacmaster stainless steel wet/dry vac is ultra-lightweight, powerful and portable. Use at home, in the garage or at the office. The stainless steel tank offers a more professional look and will stand up to the rugged demands of your job. Powerful 3 peak hp motor delivers the suction necessary for all your household projects. It features a 12 ft power cord with cord wrap, on-board accessory storage, balanced top handle design, drain port and 7 ft x 1-1/4 in locking hose. It includes an air control handle, 2 extension wands, cartridge filter, dust collection bag, reusable wet foam filter, multi-surface floor nozzle, crevice tool and round dust brush.
|
The Bosch VF130H long-life HEPA filter pairs with the either the VAC090A or VAC140A dust extractor with auto filter cleaning to help move users toward compliancy with the OSHA respirable crystalline silica dust regulation. The VF130H captures 99.97% of particles 0.3 microns and larger and it has a low-stick surface to enhance the filter-cleaning process. The VF130H filter and dust extractor unit is a critical component in the end-to-end Bosch PRO+GUARD? protection system - along with the right tool, accessory, attachment, connections and respirator. The use of a fleece filter bag is highly recommended when using VF130H, as it will help prevent the filter from being directly exposed to abrasive materials and sharp objects that can be collected during normal use of a dust extractor. The filter is for use in dry applications only.
|
Our M12? AIR-TIP? utility nozzle makes jobsite cleanup easier with a powered brush roll that agitates debris for deep cleaning applications. The powered brush roll turns on at the push of a button and is powered by an M12? REDLITHIUM? battery. Paired with a vacuum that is turned on, the utility nozzle will be able to clean up more debris in one pass for increased productivity. A suction control valve allows for ease of use on carpets and substrates. The LED lights provide adequate visibility for cleaning in low-lit environments. The tool-free brush roll removal delivers you easy maintenance when needed. The MILWAUKEE? M12? AIR-TIP? utility nozzle is compatible with other wet or dry vacuum brands with 1-1/4, 1-7/8, 2-1/2 in diameters and is part of the AIR-TIP? family of trade focused vacuum accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerSmith? PAVC101 ash vacuum is specifically designed to clean warm and cool ash out of fireplaces, wood stoves, pellet stoves and barbecue grills. The washable, replaceable and fire-resistant 2-layer filter system, together with the heat-resistant metal hose and metal canister, stands high-temperature and prevents fire hazards. A layer of micro filter catches the finest ash and dust. The Canister holds up to 3 gal of ashes. It has a powerful but quiet 10 A motor with a noise level less than 79 dB. Additional Accessories, Casters and a 16 ft cord allows use as a regular shop vacuum. It also can be used as a blower.
|
The Vacmaster Professional 9 gal wet/dry vacuum is designed to tackle tough projects around the home, shop or jobsite. The 9 gal tank offers plenty of room and the 4.5 Peak HP motor makes sure the tank gets filled, whether it's with sawdust from the shop or drywall from the jobsite. The on-board hose, power cord and accessory storage allows you to keep all of your attachments organized and in one place. The wide set casters and balanced top handle make for convenient transportation from one place to the next. Turning this Vac into a blower to remove debris from your yard or workspace could not be easier - all it takes is a simple conversion.
|
Shop-Vac Cartridge Filter, Efficiency: 99.7 %, Suitable for: Shop-Vac Wet or Dry Vacuums 5 gal and Above
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our SDS max chisel boot provides you with a solution for the regulation on respirable crystalline silica dust management. The SDS attachment is optimized for our MILWAUKEE? SDS max rotary hammers for chipping applications with bull point and flat chisels up to 1-1/8 in wide. It will work on competitive hammers. Its adjustable strap secures the hose away from the application, providing you with increased productivity. Attaching the chisel boot to our 8 Gallon Dust Extractor (8960-20) provides you with a complete OSHA Table 1 compliant solution.
|
The MILWAUKEE 49-90-1952 HEPA replacement filter captures 99.97 % of all particles greater than 0.3 micron and is compatible with the MILWAUKEE 8 gal dust extractor (8960-20).
|
Shop-Vac Wet/Dry Vacuum, Portable, 120 VAC, 11.3 A, 5.5 hp, Vacuum Capacity: 10 gal, Air Flow Rate: 70 cfm, Filter Type: Cartridge, Dry, Foam Sleeve, Inlet Connection Size: 1-1/2 in, Hose Length: 8 ft, Cord Length: 6 ft, Housing Material: Plastic, Housing Color: Black, Includes: Crevice Tool, Dry Collection Bag, Extension Wands, Filter Cartridge, Floor Nozzle, Foam Filter Sleeve, Gulper Nozzle and Hose
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get ready to conquer any mess with the Vacmaster Professional? Beast Series? 5 gal wet/dry vacuum. Whether you're on the job, at home or in your car, this powerful 6 peak hp machine is designed to handle even the toughest clean-ups. And with its compact size, you can take it with you wherever you go. With a high-performance motor, this vacuum gets the job done quickly and efficiently. Plus, our game changing SecureLock? locking accessories ensures that the attachments stay in place, even during the most challenging tasks. And if you need to blow away debris from your workspace or yard, it's a snap to convert this vac into a blower. Organizing your attachments is a breeze with the on-board storage, making this wet/dry vac a must-have for anyone who wants to keep things clean and tidy.
|
The vacmaster VBV1010PF is a unique 2-in-1 unit that allows users to switch between a wet/dry vacuum and a high-powered, handheld blower with the push of a button. This 10 gal wet/dry vac is the perfect size for a variety of tasks around the home or shop. With a four peak hp motor this vacuum makes cleanup easy, whether it's dust collection in the shop or liquid spills at home. Turning this vac into a detached, handheld blower to tidy up the yard or garage could not be easier - simply push the release button and lift the blower out of its cradle. With a blowing speed of 210 mph, this tool can handle the toughest debris. The balanced top handle design and durable casters provide stable transportation during and after use, and the on-board accessory storage ensures that all of your tools stay organized and in one place.
|
Shop-Vac Wet/Dry Vacuum, 120 VAC, 11.6 A, 5.5 hp, Vacuum Capacity: 12 gal, Air Flow Rate: 140 cfm, Filter Type: Cartridge, Disposable, Inlet Connection Size: 2-1/2 in, Hose Length: 8 ft, Cord Length: 12 ft, Housing Material: Plastic, Housing Color: Black, Includes: Crevice Tool, Dolly Tool Storage, Elbow Grip, Extension Wand, Floor Nozzle, Power Cord, Suction Hose and Utility Nozzle
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get ready to tackle the toughest messes with the full-sized Vacmaster Professional Beast Series 12 gal wet/dry vacuum! With a powerful 6 peak hp plus motor, this vac can handle anything from sawdust to drywall. The unique flat power head design conveniently stores your tools for easy access, while the on-board hose, power cord and storage keep all your attachments in one place. Equipped with SecureLock locking accessories and a 29 ft cleaning reach, this vac has everything you need for quick and efficient cleaning. With wide-set casters and a balanced top handle, transporting it from one place to the next is a breeze. And when you're done, effortlessly convert it into a blower to remove debris from your yard or workspace. Effortlessly access the tank using the large locking latches and use the high-efficiency dust bag to make cleaning easy. Don't miss out on this must-have tool for your home, shop or jobsite.
|
Our M12 FUEL? 1.6 gal wet/dry vacuum is the first cordless 12 V wet/dry vacuum of its kind. It delivers you up to 40% more suction than 18 V competitors, is the most compact and is up to 2X quieter compared to other common wet/dry Shop-Vacuums. The POWERSTATE? brushless motor delivers up to 45 cfm and 42 in of suction. It's compact footprint stores neatly in a van or cart with a stackable design and organized on-board storage conveniently keeps the attachments inside of the unit. It also comes with a wall mount hanging plate, giving you increased storage options. With 14 min of runtime on high and 26 min on the low setting, this compact vacuum is ideal for spot and service focused wet/dry quick clean-up needs. This Milwaukee? cordless wet/dry vacuum comes with a flexible hose, crevice tool, utility nozzle, wall mount and a certified HEPA filter.
|
The Bosch 18SG-7 7 in concrete surfacing attachment dust collection system reduces clean-up time and provides cleaner, safer air for user.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop-Vac Wet/Dry Vacuum, 120 VAC, 12 A, 6.5 hp, Vacuum Capacity: 16 gal, Air Flow Rate: 150 cfm, Filter Type: Cartridge, Disposable, Inlet Connection Size: 2-1/2 in, Hose Length: 8 ft, Cord Length: 12 ft, Housing Material: Plastic, Housing Color: Black, Includes: Crevice Tool, Elbow Grip, Extension Wand, Floor Nozzle, Power Cord, Suction Hose, Tool Storage Bag and Utility Nozzle
|
This Vacmaster Professional? Beast Series? 16 gal 6.5 peak HP wet or dry vacuum is a powerful high-performance vac designed to tackle the toughest cleanup projects - at the jobsite, around the shop or in the garage. On-board hose, accessory and power cord storage eliminates unneeded hassle and minimizes total storage space. A unique flat power head design allows you to conveniently store tools on top of the vacuum so they are easily accessible when needed. Over 28 ft of cleaning reach allows you to reach farther without unplugging the unit. Quickly control the power with the large dust sealed on or off switch. Heavy-duty 360 deg swivel casters improve mobility on most surfaces.
|
Shop-Vac Wet/Dry Vacuum, 6.5 hp, Vacuum Capacity: 14 gal, Filter Type: Cartridge, Inlet Connection Size: 2-1/2 in, Hose Length: 8 ft, Cord Length: 12 ft, Housing Material: Plastic, Housing Color: Black, Includes: (2) Extension Wands, Cartridge Filter, Collection Bag, Crevice Tool, Floor Nozzle, Hose Holder, Lock-On Hose, Power Cord and Utility Nozzle
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee? HAMMERVAC? Dedicated dust extractor (2712-DE) features an inline dedicated design engineered to connect directly to and be power by the M18? FUEL? 1 in SDS Plus rotary hammer (2712-22). This design allows for a very compact HAMMERVAC? and rotary hammer combination to fit in the most confined work spaces. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS?, which filter 99.97% of all particles greater than 0.3 um, means more compatibility on the jobsite. For accurate hole depths, this product is built with an adjustable depth stop and ruler for easy and precise adjustments. Featuring a high-capacity dust box, users can now work longer without emptying dust box as often.
|
Tackle the toughest cleaning jobs with the Karcher WD 4, a wet and dry vacuum cleaner designed to be used on car, garage and yard jobs that your standard vacuum can't handle. This machine is powered by a 1100 W motor, which works alongside a robust 5.3 gal container to pick-up anything from light dust to heavy rubble and liquid. Switch seamlessly between wet and dry debris thanks to its clever flat pleated filter system, which also makes it easy to change the filter without coming into contact with the dirt. Special floor nozzles make vacuuming effortless, whatever the job. Its compact size means that the WD 4 is easy to transport and store, with all its accessories safely stowed on board so they're close to hand when you need them. It comes with a 7.5 ft suction hose, 1.8 ft suction tubes, hand nozzle, crevice nozzle, a wet or dry floor nozzle, automotive style pleated filter and a fleece filter bag. German engineering. 100% quality tested. Made in Romania.
|
Our M18 FUEL? 6 gal wet or dry vacuum brings unmatched performance, durability, and versatility to jobsite cleanup. The POWERSTATE? brushless motor and optimized components outperform 3.5 peak HP wet or dry vacuums, delivering more cleaning power than corded. The wet or dry vac cleans up more common jobsite debris like drywall dust, concrete dust and wood or metal shavings than 3.5 peak HP wet or dry vacuums in the same amount of time. This wet or dry vacuum provides you with the most durable wheels and hoses with reinforced casters and tread design for up to 8X wheel life. The crush and twist-resistant hose construction delivers up to 2X hose life. This vac is part of the most versatile wet or dry vacuum system with interchangeable motor heads, tanks and carts for varying performance, holding capacity and mobility with the easy access foot pedal. MAX POWER MODE delivers up to 31 min of continuous cleaning time per charge on an M18? REDLITHIUM? HIGH OUTPUT&trade.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our M18 FUEL? 9 gal wet or dry vacuum brings unmatched performance, durability and versatility to jobsite cleanup. The POWERSTATE? brushless motor and optimized components Outperform 4.25 peak HP wet or dry vacuums, delivering more cleaning power than corded. The dual-battery motor head requires (2) M18? REDLITHIUM? batteries (not included) to operate and cleans up more common jobsite debris like drywall dust, concrete dust and wood or metal shavings than 4.25 peak HP wet or dry vacuums in the same amount of time. This wet or dry vacuum provides you with the most durable wheels and hoses with reinforced casters and tread design for up to 8X wheel life and crush and twist-resistant hose for up to 2X hose life. This vac is part of the most versatile wet or dry vacuum system with interchangeable motor heads, tanks and carts for varying performance, holding capacity and mobility with the easy access foot pedal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Whether taking on spot, area or final cleanups, the Milwaukee M18 FUEL 3-in-1 backpack vacuum brings unmatched cordless performance, portability and versatility to the jobsite. The POWERSTATE brushless motor and cyclonic design deliver up to 2X more suction power than traditional jobsite vacs, allowing users to efficiently tackle common jobsite debris like drywall dust, concrete dust and wood/metal shavings. A removable harness, integrated canister hook and handle allow users to wear, hang and carry the product for ultimate adaptability. Standard accessories include a flexible hose, telescoping extension wand, floor tool, crevice tool, HEPA filter and dust extraction adapter. At only 76 dB(A), the vacuum is up to 3X quieter than traditional vacs, providing comfortable operation on any jobsite, including occupied spaces.
|
The 18 V LXT? compact handheld canister vacuum kit (XLC07SY1) is versatile and portable to handle quick clean ups and car interior cleaning. The Makita built motor delivers 49 cfm for use on a wide range of debris. The vacuum hose extends to 40-1/2 in to access hard to reach spaces. Users can get up to 40 min of continuous run time with a fully charged 1.5 Ah battery (BL1815). There are 3-speed buttons to select the correct speed for the application. It operates at a noise level of 68 dB(A). An LED warning light indicates when to recharge the battery. The XLC07SY1 weighs only 4 lb for easy portability and reduced operator fatigue. It's a part of Makita's expanding 18 V LXT? system, the world's largest cordless tool system powered by 18 V lithium-ion slide style batteries. Makita 18 V LXT? lithium-ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls?. Star Protection is communication technology that allows the Star Protection equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over discharging and overheating. For increased versatility, the tool can also be powered by Makita 18 V LXT? lithium-ion batteries with the star symbol on the battery indicating Star Protection inside.
|
The Milwaukee? 8 gal dust extractor provides users with an OSHA approved solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). An automatic filter cleaning mechanism helps maintain consistent airflow and suction at 148 cfm in tough dust-producing applications. The extractor's unique two step filtration system includes a 99.97% efficient HEPA filter as the final step, leading to cleaner air and a safer work environment. For added convenience, an on-board tool activated plug allows users to start and stop the vacuum with a power tool to increase productivity. The adapters included are compatible with all Milwaukee? dust extraction accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our M18 FUEL? 9 gal dual-battery wet or dry vacuum brings unmatched performance, durability and versatility to jobsite cleanup. The POWERSTATE? brushless motor and optimized components outperform 4.25 peak HP wet or dry vacuums, delivering more cleaning power than corded. The dual-battery motor head requires (2) M18? REDLITHIUM? batteries to operate and cleans up more common jobsite debris like drywall dust, concrete dust and wood or metal shavings than 4.25 peak HP wet or dry vacuums in the same amount of time. This wet or dry vacuum provides you with the most durable wheels and hoses with reinforced casters and tread design for up to 8X wheel life and crush and twist-resistant hose for up to 2X hose life. This vac is part of the most versatile wet or dry vacuum system with interchangeable motor heads, tanks and carts for varying performance, holding capacity and mobility with the easy access foot pedal. MAX POWER MODE delivers up to 25 min of continuous cleaning time and up to 36 min on MAX RUN-TIME MODE per charge on (2) M18? REDLITHIUM? XC8.0 battery packs.
|
Stay in compliance with current 1926.1153 osha dust regulations utilizing the powerful 10 gal wet/dry hepa dust extractor with automatic filter cleaning. Delivering up to 155 cfm suction, with a 90 in Static water lift, this convenient dust solution features an automatic filter cleaning system that initiates every 30 s. When paired with fleece vacuum bags (DWV9402) and a 99.97% efficient hepa filter (DWV9330) this product helps prevent releasing harmful dust into the work environment. For added convenience, an optional storage rack is available to interlock with Tstak? and Toughsystem? storage solutions. This tool comes tag Ready? for seamless integration into the DeWALT? Tool Connect? system.
|
|
|
