Home > POWER TOOLS & ACC > POWER NAIL GUNS & STAPLERS > STRIP NAIL GUNS - PNEUMATIC
Choose a sub category:
FRAMING - 20-21 DEG PLASTIC FRAMING - 28-36 DEG PAPER FRAMING - 28 DEG WIRE WELD
METAL CONNECTOR - 30-36 DEG
Sort By:
1
Hitachi NR90AEPR Lightweight Framing Nailer JoistPro 7L0001N Connector Nailer Hitachi NR90ADPR Lightweight Framing Nailer
The NR90AE(S1) framing nailer drives plastic collated nails from 2 in up to 3-1/2 in length and features Metabo HPT's next generation "industrial design." Weighing only 7.5 lb, it is easy-to-use all day, while still providing the power as other bulkier and heavier framing nailers. It can be used for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction. The redesigned head guard of the NR90AE(S1) framing nailer allows for a faster and easier disassembly process, saving valuable time during tool maintenance. Nosepiece probe locates metal connector holes providing accurate nail placement. Lightweight and well balanced. Dry-fire lockout. Powerful enough to drive through engineered lumber. Adjustable rafter hanger.  Fastener capacity: 30, Shanks: .131"-.148", Range: 1-1/2", Collation: 34 degree paper tape strip. Tool-free adjustable exhaust deflector. Great 3-1/2 in 30 deg paper collated framing nailer for flooring and framing, truss build-up, roof decking, wall sheathing and housing construction. The lightweight Paper Collated Framing Nailer weighs only 7 lb, making it easy to use all day, while still providing the power of bulkier, heavier nailers. The newly redesigned head guard allows for a faster and easier disassembly process, saving you valuable time during tool maintenance.
Bostitch Strapshot Metal Connector Nailer NAILER FRMG L/P PAPR TP COLATD FramePro 4Z0101N Pneumatic Strip Framing Nailer
Use this metal connector nailer STRAPSHOT? with metal framing hardware. Application is quick and precise. It is lightweight and easy to maneuver. Depend on this metal connector nailer strength and durability. Bostitch Framing Nailer, 3/8 in Air Inlet, Air Consumption: 6.4 cfm/Shot, Air Pressure: 70 to 120 psi, Magazine Capacity: 90, Collation Angle: 30 deg, Collation Type: Paper, Exhaust Type: Fixed, Fastener Size: 0.113 to 0.131 in Dia x 2 to 3-1/4 in L, Triggering Mode: Tool-Free Selectable, Ergonomic Handle, Housing Material: Magnesium, Yellow, Dimensions: 19-3/4 in L x 5-3/4 in W x 12-3/4 in H, Includes: 3/8 in NPT Male Plug This well-balanced lightweight XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day. Drives ring, screw and smooth shank 30-34 deg paper taped strip nails. Senco XP tools are specifically engineered for demanding pros and demanding environments.
NAILER FRAMING LW/PRFL WR WELD CONNECTOR NAILER METAL 1-1/2  NAILER FRMG COMPACT PASLODE
Bostitch Framing Nailer, 3/8 in Air Inlet, Air Consumption: 6.4 cfm/Shot, Air Pressure: 70 to 120 psi, Magazine Capacity: 100, Magazine Loading: Top, Collation Angle: 28 deg, Collation Type: Wire Weld, Exhaust Type: Fixed, Fastener Size: 0.113 to 0.131 in Dia x 2 to 3-1/4 in L, Triggering Mode: Tool-Free Selectable, Ergonomic Handle, Housing Material: Magnesium, Yellow, Dimensions: 20-1/2 in L x 5-3/4 in W x 12-3/4 in H, Includes: 3/8 in NPT Male Plug At 10.5 in (26.7 cm) tall, fits conveniently inside 12 in (30.5 cm) on-center framing and other tight areas. Fastener placement made easy with exposed nail tip. Tool-free adjustable rafter hook for convenience. Low nail lockout helps prevent jamming. In-line magazine for a well balanced tool. Slip on grip. 29.0 magazine capacity. Belt/rafter hook included. Adjustable exhaust. Operating pressure of 70 to 120 psi. Lightweight tool at only 4.6 lb. Ideal for interior remodeling jobs. Lightweight, yet powerful at only 5.9 lbs. Fits easily into the tightest spaces such as between 16" o.c. studs. Works in bump mode for speed on job site. Quick 2-step nail strip reload. Soft grip handle for comfort. Great maneuverability to get in the tightest spaces.
Stanley F21PL Angled Framing Nailer FRAMING NAILER 21DEG PLSTIC RH FRAMING NAILER PT 2"-3-1/2"
This 21 deg plastic collated framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a pushbutton. Depend on this 21 deg plastic collated framing nailer for efficiency. Industrial-grade design for high-speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Adjustable rafter hook. Lightweight at only 8 lb with enhanced ergonomics and balance for comfort and control. Tool-free features depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Fastener diameter ranges from 0.113 to 0.148 in. Magazine capacity of 50 nails. Operating pressure 70 to 120 psi. Overmold grip. Frame full walls faster with heavy duty power. Reliable performance and durable construction for less maintenance. Compact size fits between 16" o.c. studs, joists and rafters. Soft grip handle for comfort. Rafter hook, moves out of the way when not in need. Adjustable deflector cap. 30 degree paper tape; bright, hop dipped galvanized plus. Weighs only 8.4 lbs. Speed: 12 nails per second, sequential or selectable operation. Includes PowerMaster Plus Pneumatic framing nailer, bump fire trigger, hex wrench (on tool), safety glasses, owner's manual and 1/4" air fitting.
Stanley F33PT Angled Framing Nailer Stanley F28WW Angled Framing Nailer NAILER FRAMING FH PLSTC 21DEG
This 33 deg paper tape framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. depend on this 33 deg paper tape framing nailer for efficiency. This 28 deg wire weld framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a pushbutton. Depend on this 28 deg wire weld framing nailer for efficiency. The CFRN9021-B is one of the most versatile framing nailers in the industry. The CFRN9021-B can be used in framing, sheathing, siding, trusses, bridging, engineered lumber, strapping, fencing, exterior decks and sub-flooring.
NAILER FRMNG FL RND HD 3-1/2IN FRAMING NAILER 30DEG PAPER    FRAMING NAILER 28 DEG WIRE WLD
The FN81T1 delivers the power and durability demanded by professional contractors for all-day performance on the toughest jobsites. It drives a wide range of plastic collated nails from 0.113 to 0.148 in in diameter, and 2 to 3-1/2 in L. Upgraded features include, an ergonomic design, an in-line magazine for clear line of sight and a tool-free depth of drive for quick adjustments. 30 deg paper tape collated framing nailer. Industrial-grade design for high-speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Lightweight at only 8.1 lb with enhanced ergonomics and balance for comfort and control. Tool-free features depth of drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Top load magazine. Magazine capacity of 75 nails. Operating pressure 70 to 120 psi. Overmold grip. 28 deg wire weld framing nailer. Industrial-grade design for high-speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Lightweight at only 8.1 lb with enhanced ergonomics and balance for comfort and control. Tool-free features depth of drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Top load magazine. Magazine capacity of 100 nails. Operating pressure of 70 to 120 psi.
NAILER FRAMNG PAPER TAPE 3.5IN NAILER FRAME 3-1/4FULL RD HEAD NAILER CON 1.5-2.5X0.131-0.162
The FN91T1 delivers the power and durability demanded by professional contractors for all-day performance on the toughest jobsites. It drives a wide range of paper tape collated nails from 0.113 to 0.135 in diameter and 2 to 3-1/2 in length. Upgraded features include, an ergonomic design, an inline magazine for clear line of sight and a tool-free depth of drive for quick adjustments. This well-balanced lightweight XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day. Drives ring, screw and smooth shank full round head nails for tough fastening jobs. The JN91P1 delivers the power to drive 1-1/2 to 2-1/2 in nails into the toughest substrates, including engineered lumber. This small and compact metal connector nailer fits easily between rafters and joists and the nosepiece design leads with a metal point for accurate nail placement into prepunched holes.
NAILER FRMG PLST STRP 3-1/4IN NAILER FRMG 21DEG RND 3-1/2IN NAILER FRMG PAPER CLTD 3-1/4IN
The NR83A5(S) full round head framing nailer without depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83A5(S) is like the original NR83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A. The NR83A5(S) relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power. The 21 deg full round head 3-1/2 in framing nailer model AN924 combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing or siding and sub-flooring. It is ideal for framers, roofers and carpenters. The AN924 drives 21 deg plastic collated framing nails from 2 in to 3-1/2 in length and 0.113 to 0.148 in diameter. It has a two-mode selector switch bump, sequential for increased convenience. The AN924 has a lightweight design only 8.3 lb with durability features that include a heat-treated S7 steel driver blade, a solid aluminum top-loading magazine and a nail lock-out mechanism that protects the tool and work surface from dry-fires. Added features include tool-less depth adjustment for flush or countersink nailing, added tool hook and an ergonomic rubberized grip. The NR83AA5 paper collated framing nailer is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83AA5 is like the original NR83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A. The NR83AA5 relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power.
NAILER FRMG PLST STRP 3-1/4IN Hitachi Strap-Tite Pneumatic Fastening Nailer FramePro 701XP 2H0133N Framing Nailer
The NR83A5 full round head framing nailer with depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83A5 is like the original NR83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A .The NR83A5 relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power. The NR65AK2 Strap-Tite? strip nailer accepts 1-1/2 in and 2-1/2 in fasteners while offering great precision and control for all metal connecting needs. It is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement. Improved internal and external features for improved durability and comfort. These compact framers are easy to handle, and easy on the arm. The 31-34 degree short, in-line magazine provides excellent maneuverability and line of sight. Drive a wide range of fasteners to handle virtually any job. Specs: Height: 13-1/4"; Length: 15.13"; Weight: 8.0 lb; Reg. Operating Pressure: 70-120 psig (4.8-8.3 bar); Mode of Operation: Sequential Actuation. Fastener Specifications: Nail Capacity: 56-80, (Depending on Gauge); Drives 2"-3-1/2" Smooth Shank Nails ('Sencote' or plain); 2"-3" Ring Shank Nails. Shank Diameters Include: .113, .120, .131 and .148.
Bostitch Strapshot Angled Metal Connector Nailer NAILER MTL CONN 1.5IN PASLODE NAILER MTL CONN 1-1/2X2-1/2IN
Use this metal connector nailer STRAPSHOT? with metal framing hardware. Application is quick and precise. It is lightweight and easy to maneuver. Depend on this metal connector nailer strength and durability. With this nailing system, you will have the job done in no time. Heavy-duty jobs require a heavy-duty nailer. That's why the pros turn to the proven performance, durability and driving power, only a Paslode pneumatic framing nailer can provide. When used with Paslode nails, this nailing system can help you drive jobs home on time, every time. More and more metal connectors like hurricane ties, straps and tie downs are being specified in single family homes and multi-family structures. The installation of metal connectors requires a nailer that delivers the power to flush drive nails into engineered lumber (LVL, LSL, PSL), the durability to withstand production use and the speed and reliability to be productive. That's why professionals have relied on the Paslode F250S-PP Positive Placement? Nailer with its unique probe that finds metal connector nailing holes quickly and accurately, hole after hole and its ability to repeatedly drive nails flush. Paslode invented the metal connector nailing category and our Positive Placement Fastening Systems which include hardened, heat treated metal connector nails deliver maximum productivity and reliability.
KIT FRMNG NAILER PLSTC 3-1/2IN KIT FRMNG NAILER PAPER 3-1/2IN NAILER CONN MTL CRDLS 1-1/2IN
Combining true pneumatic feel, speed and power with cordless convenience, the F-35FRHXP drives up to 3-1/2 x 0.131 in framing nails into the hardest substrates without the expense and hassle of fuel cells. With its robust design and durable construction, the F-35FRHXP is ideal for professional framers and contractors. Combining true pneumatic feel, speed and power with cordless convenience, the F-35FRHXP drives up to 3-1/2? x .131? framing nails into the hardest substrates without the expense and hassle of fuel cells. With its robust design and durable construction, the F-35FRHXP is ideal for professional framers and contractors. The cordless 1-1/2 in Positive Placement? metal connector nailer has Paslode's proprietary Positive Placement? nose tip, which allows you to quickly and accurately find metal connector holes and drive nails with precision and speed. Paslode's fuel system makes our cordless nailers lighter, more reliable, and more durable than battery only nailers. We're so confident in our fuel system that we back each of our cordless nailers with a 2-year service promise. If anything goes wrong with your nailer, we'll fix it for free.
   
 
1