|
|
|
|
|
|
|
|
|
|
|
|
|
|
The line level has lightweight construction to minimize line sag. Snag free open hooks allow free sliding of level.
|
The 3 in line level is simple, yet accurate. Its flat bottom allows for easy surface leveling. With special hooks for free sliding and high-visibility tinted liquid in vial for clear readings, this tool helps you read and mark angles with ease.
|
Empire Line Level, Number of Vials: 1, Vial Material: Acrylic, Vial Positions: Level, Accuracy: 0.001 in, Plastic, Blue, 3 in L, 5/8 in W, 15/16 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ideal addition to every toolbox, this 3 in line level's lightweight design reduces line sag, for an accurate reading every time. It is also highly durable thanks to its impact-resistant Structo-Cast? construction and features unrestricted hooks that allow for easy movement.
|
CH Hanson Flagging Tape, PVC, Fluorescent Orange, 150 ft L, 1-3/16 in W, 4 mil Thick
|
CH Hanson Flagging Tape, PVC, Fluorescent Lime, 150 ft L, 1-3/16 in W, 4 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Flagging Tape, PVC, Fluorescent Red, 150 ft L, 1-3/16 in W, 4 mil Thick
|
CH Hanson Flagging Tape, PVC, Fluorescent Pink, 150 ft L, 1-3/16 in W, 4 mil Thick
|
CH Hanson Flagging Tape, PVC, Fluorescent Green, 150 ft L, 1-3/16 in W, 4 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Flagging Tape, PVC, Fluorescent Yellow, 150 ft L, 1-3/16 in W, 4 mil Thick
|
CH Hanson Flagging Tape, Polyethylene, White, 300 ft L, 1-3/16 in W, 2 mil Thick
|
CH Hanson Flagging Tape, Polyethylene, Red, 300 ft L, 1-3/16 in W, 2 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Flagging Tape, Polyethylene, Orange, 300 ft L, 1-3/16 in W, 2 mil Thick
|
CH Hanson Flagging Tape, Polyethylene, Blue, 300 ft L, 1-3/16 in W, 2 mil Thick
|
CH Hanson Flagging Tape, Polyethylene, Yellow, 300 ft L, 1-3/16 in W, 2 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Flagging Tape, Polyethylene, Green, 300 ft L, 1-3/16 in W, 2 mil Thick
|
The quick and easy solution to your leveling problem, Johnson's Bull's-Eye? level is compact, easy to transport and levels in all directions. It features a durable acrylic body and mounting holes for attaching to your work surface.
|
Calculate precise length and width measurements with this single-sided tape measure. The polymer-coated blade withstands abrasion for lasting use and it provides accurate readings. This Vulcan yellow measuring tape is 5/8 in wide with large numbers for high visibility.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides dependable detection of wall studs. Magnet works by locating steel nails and screws used to hold drywall to studs. Base of the stud finder is notched for convenient marking once studs are located.
|
CH Hanson Stake Flag, PVC, Red, 15 in L
|
CH Hanson Stake Flag, PVC, Pink, 15 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Stake Flag, PVC, Lime, 15 in L
|
CH Hanson Stake Flag, PVC, Blue, 15 in L
|
CH Hanson Stake Flag, PVC, Orange, 15 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vulcan Torpedo Level, Number of Vials: 3, Vial Material: Solvent Oil, Vial Positions: 0, 45, 90 deg, Accuracy: 1 mm/m, Number of Hang Holes: 1, Number of Measuring Surfaces: 0, Magnetic/Nonmagnetic: Magnetic, Plastic, Yellow, 9 in L, 1-1/2 in W, 5/8 in H
|
Stainless steel with depth gauge pocket clip. 32nds and 64ths on one side, decimal equivalents on reverse. 15/32 in wide.
|
Trim and lightweight metallic colored ABS case with durable key ring for convenience. Yellow, blade lacquer-coated for added rust protection, slide lock keeps blade extended as needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire POLYCAST Torpedo Level, Vial Type: Top-Read, Number of Vials: 3, Vial Material: Acrylic, Vial Positions: 45 deg, Accuracy: 0.001 in, Plastic, Yellow, 9 in L, 5/8 in W, 1.438 in H
|
This lightweight aluminum level has special hooks to hold line allowing the level to slide freely and a flat bottom for surface leveling.
|
Empire Bull's Eye Surface Level, Metal, 1-3/8 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUFKIN L600N Series tape measures feature a bright orange textured case for easier grip and increased user comfort. The blade has a matte finish which reduces glare which increases blade legibility. The blade is also nylon coated for an extended product life. The dual riveted end hook tips allow the user to mark measurements without the need for a writing utensil.
|
Empire Pocket Level, Number of Vials: 1, Vial Positions: 1, Plastic, Dimensions: 5 in L
|
CH Hanson Sub-Zero Flagging Tape, PVC, Fluorescent Pink, 150 ft L, 1-3/16 in W, 5 mil Thick, Temperature Rating: -40 deg F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Sub-Zero Flagging Tape, PVC, Fluorescent Orange, 150 ft L, 1-3/16 in W, 5 mil Thick, Temperature Rating: -40 deg F
|
CH Hanson Sub-Zero Flagging Tape, PVC, Fluorescent Lime, 150 ft L, 1-3/16 in W, 5 mil Thick, Temperature Rating: -40 deg F
|
CH Hanson Sub-Zero Flagging Tape, PVC, Fluorescent Red, 150 ft L, 1-3/16 in W, 5 mil Thick, Temperature Rating: -40 deg F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Flagging Tape, Plastic, Orange, 200 ft L, 1 in W, 2 mil Thick
|
Empire Flagging Tape, Plastic, Lime Green, 200 ft L, 1 in W, 2 mil Thick
|
Empire Flagging Tape, Plastic, Pink, 200 ft L, 1 in W, 2 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Flagging Tape, Plastic, Yellow, 200 ft L, 1 in W
|
Find plumb, level and 45 deg quickly and easily with Johnson's 9 in Structo-Cast? torpedo level. This level is durable and convenient, with Johnson's unique high-impact and non-corrosive Structo-Cast? frame that was designed to withstand even the toughest jobsite abuse. It also features a top-read window for convenient, easy viewing, while the V-groove frame fits on pipe and conduit.
|
The #843/1 pencil compass and scriber is ideal for marking and scribing contours and circles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Vulcan Torpedo Level is ideal for determining horizontal and vertical plane as well as incline. The level saves time and rework with its high precision and accuracy. The magnets provides superior holding strength, secures the torpedo level to the metal surface. It's compact design is great for working in tight spaces.
|
This convenient pocket level is always within reach for taking accurate measurements on the fly. It fits easily in your utility drawer, tool box or glove compartment and has a metal pocket clip so you can effortlessly keep it on you as you move about your jobsite. The acrylic vial and high-impact body are highly durable and the level features a V-groove edge that fits on pipe and conduit. The tip is also magnetic, making the level a handy pickup tool as well.
|
The #803 stair gage set speeds and improves the quality of repetitive work, including making angle cuts on rafters and stair stringers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Johnson's 8 in T-bevel takes the guesswork out of angle duplication and eliminates the problems associated with analog readings and manual measurement transfer. It features a heavy-duty adjustable stainless steel blade that will never rust or corrode, as well as a durable Structo-Cast? high-impact handle with a hand grip. Its durable locking nut holds the blade securely in place to keep your work accurate when transferring angles.
|
Durable stainless steel blade with built-in blade lock for transferring angles. Tough 5-1/2 in, plastic handle provides handy and comfortable grip.
|
The high-visibility torpedo level is durable and accurate. Its top-read feature allows visibility from above for easy reading and marking. Constructed of ABS plastic for impact resistance and tinted 360 deg vials for visibility, this tool is built for accuracy, ease of use and durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Calculate precise length and width measurements with this single-sided tape measure. The polymer-coated blade withstands abrasion for lasting use and it provides accurate readings. This Vulcan yellow measuring tape has large numbers for high visibility.
|
As a saw guide, stair layout tool or rafter tool, Johnson's 7 in rafter square will help you get the job done accurately and easily. It features Johnson's unique Structo-Cast? molded frame that is both lightweight and durable as well as permanent molded graduations for making quick and easy measurements. This rafter square comes with handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in. And you'll always find this square quickly in your toolbox thanks to its fluorescent, easy-to-see color.
|
Empire Rafter Square, Graduation: 0.125 in, Measuring Angle: 90 deg, Polycast, Yellow, 7 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Find plumb, level and 45 deg quickly and easily with Johnson's 9 in Structo-Cast? torpedo level. This level is durable and convenient, with Johnson's unique high-impact and non-corrosive Structo-Cast? frame that was designed to withstand even the toughest jobsite abuse. It also features a top-read window for convenient, easy viewing. Its rubber, magnetic edge also allows for convenient hands-free use on ferrous metal surfaces, while the V-groove frame fits on pipe and conduit.
|
Lightweight construction minimizes line sag. Unbendable open hooks allow level to slide freely. Pocket clip will guard tool against loss.
|
Two is better than one! These 3 in line levels lightweight design reduces line sag, for an accurate reading every time. They are also highly durable thanks to their impact-resistant Structo-Cast? construction and feature unrestricted hooks that allow for easy movement. The impact-resistant Multi-Pitch? vial also read slope in 1/8 in increments.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Milwaukee 6 ft/2 m keychain tape measure (48-22-5506) combines on-the-go convenience with maximum durability and functionality needed by professionals in all trades. Delivering up to 10X longer life than the competition, the new tape measure features nylon blade protection for resistance to jobsite contamination and a five-point reinforced frame for protection against damage from dropping. For added functionality, a secure, heavy-duty keychain clip gives it the versatility to clip on almost anything from belts to keychains. It is dual printed in imperial and metric. Backed by a limited lifetime warranty, the 6 ft/2 m keychain tape measure confirms Milwaukee's commitment to best-in-class durability and relentless commitment to provide innovative solutions to the end user that will increase productivity.
|
The Stanley 12-by-1/2 in tape measure features a polymer-coated blade for long life, a durable textured case for a non-slip grip and high-contrast colors for easy readability, with numerical readouts every 1/8 in. It measures 12 ft in L by 1/2 in W and stands out 7 ft.
|
CH Hanson Barricade Safety Tape, Polyethylene, Red, 300 ft L, 3 in W, 2 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Barricade Safety Tape, Polyethylene, Yellow, 300 ft L, 3 in W, 2 mil Thick
|
|
The 8 in Speedlite? square is formed from lightweight, high-impact structural composite and is available in matte gray, high-visibility yellow and high-visibility orange. It's basically the same as the one and only Speed? square but is also great for use with siding and other delicate materials, since it won't mar soft finishes. Plus, its 8 in size means it's ideal for marking cuts in 8 in siding. Look for the Diamond?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Post and Pipe Level, Number of Vials: 3, Polycast, 9 in L, 5-1/2 in W, 9 in H, Includes: High-Strength Rubber Strap
|
The ideal addition to every toolbox, this 3 in line level's durable, lightweight aluminum construction reduces line sag, for an accurate reading every time. It features unrestricted hooks that allow for easy movement.
|
Crafted from sturdy extruded aluminum, this yardstick features screened, thermal-bonded black graduations in 1/8 in and 1/16 in that are easy to read. And the yardstick's clear, protective anodized finish protects it from wear and tear, extending the life of the tool.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Calculate precise length and width measurements with this single-sided tape measure. The polymer-coated blade withstands abrasion for lasting use and it provides accurate readings. This Vulcan yellow measuring tape is 1 inch wide with large numbers for high visibility.
|
The Classic Stanley 10 ft PowerLock? pocket tape measure with diameter scale measures up to 3 ft, features a polymer-coated blade with secure blade lock and our Tru-Zero?? end hook for accurate measurements. Its slim, high-impact chrome ABS case is durable on the job.
|
Calculate precise length and width measurements with this single-sided tape measure. The polymer-coated blade withstands abrasion for lasting use and it provides accurate readings. This Vulcan yellow measuring tape has large numbers for high visibility.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For finding a plumb (vertical) line over a long distance. Removable cap for quick, easy and accurate centered string installation.
|
Works as a rafter square, try square, protract or a power saw guide. Lightweight compact heavy-duty ABS plastic body fits conveniently into pocket or tool belt. Detailed instruction book included.
|
This is a heavy duty hardened, precision ground satin chrome blade that can be used as a gauge for transferring measurements. It's made of stainless steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The essential marking and checking tool for any woodworker, this 8 in try and miter square makes assessing angles and marking straight cuts easy and accurate. Its Structo-Cast? handle is both durable and lightweight, while its heavy-duty blade is made of stainless steel so you'll never need to worry about rust or corrosion. This square features graduations in 1/8 in increments that are permanently etched in black for easy visibility.
|
Empire Heavy-Duty Straight Edge, Measuring Range: 0 to 36 in, Aluminum, Silver, 36 in L, 1 in W
|
Featuring a polymer-coated blade, high-impact ABS case and a Tru-Zero? end hook, pros and DIYers alike can count on this Stanley 25 ft tape measure for precise measurements and long-lasting durability. It's easy to read, easy to use and built for dependability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Barricade Tape, Standard, 200 ft L, 3 in W, 2 mil Thick, Plastic Backing, Red
|
Johnson's 8 x 12 in carpenter square features EZ Read? thermal bonded numbers and 1/8 in graduations for easy visibility. And its rugged steel construction makes the square durable enough to withstand even the worst jobsite abuse.
|
Make your next stair or rafter work fast, easy and accurate with Johnson's gauge set. These flush-mounted, brass-plated thumbscrews are durable and ideal for repeat angle cuts when laying out stairs and rafters. They attach to all standard framing and carpenter squares.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Level posts and pipes accurately and with ease using Johnson's post and pipe level. This bright orange level features three rugged acrylic vials that read plumb and level simultaneously, while the reflective backing increases vial visibility for ease of use. The level comes with a rubber strap that quickly attaches to any post, pole or stringer for hands-free use when working on difficult, one-man jobs.
|
Empire Plumb Bob, 5 oz, Steel, Plated
|
This easy-to-read PowerLock? heavy-duty tape measure features a 12 ft blade that stands up to tough use. The blade is coated with Mylar polyester film which minimizes friction, resists abrasions and helps extend blade life. The Tru-Zero? end-hook ensures precise measurements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Calculate precise length and width measurements with this single-sided tape measure. The polymer-coated blade withstands abrasion for lasting use and it provides accurate readings. This Vulcan yellow measuring tape has large numbers for high visibility.
|
The #29 plastic protractor facilitates measurement and marking of inside, outside and sloped angles. It is ideal for construction jobs, cabinet-making and fine carpentry, where a standard protractor or T-bevel won't fit.
|
The #230 economy straight leaf feeler gage is ideal for adjusting and gaging spark plugs, distributor points and valve clearances, as well as measuring spaces between parts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For finding a plumb (vertical) line over a long distance. Removable cap for quick, easy and accurate centered string installation.
|
The steel carpenter's square is durable and accurate. Its made of high-quality hardened steel for long life. With embossed graduations, reverse reading scale and protective finish that protects against rusting, this tool allows for efficient measuring and marking.
|
Johnson's easy-to-use 12 in Structo-Cast? combination square gives you the accuracy and precision you need for every job. Its stainless steel blade has English graduations of 1/8 in, 1/16 in and 1/32 in that are permanently stamped, so you'll never worry about them wearing or fading. It also features a durable acrylic vial and heavy-duty Structo-Cast? molded reversible head with a lock bolt and steel screw to ensure your measurements are spot-on every time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight aluminum body with durable plastic handle. Can be used to lay out 45 and 90 deg angles, 8 in blade with embossed 1/8 in graduations.
|
Empire Stair Gauge, Brass, Gold, 3/4 in Dia
|
The 24 in high-impact ABS level is durable and accurate. Its ABS construction provides shock resistance and strength. With a top-read center vial, measuring scale for added utility and non-marring plastic construction, this tool is built for accuracy, ease of use and durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Work easier, faster and smarter with this I-beam level. Its corrosion-resistant aluminum frame is durable to ensure a long working life and that frame is protected by shock-absorbing end caps if the level is accidentally dropped. The level also comes equipped with durable acrylic vials for easy reading at different angles as well as a top-read window allowing the user to stand over the work to view the vials. Marking cuts, centerlines and drill points is simplified with the level's ruled working edge.
|
Precision made, with etched fine black graduations, on stainless steel finish. Side 1 including 10, 100 and side 2 including 32, 64.
|
The LUFKIN L600N Series tape measures feature a bright orange textured case for easier grip and increased user comfort. The blade has a matte finish which reduces glare which increases blade legibility. The blade is also nylon coated for an extended product life. The dual riveted end hook tips allow the user to mark measurements without the need for a writing utensil.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Flagging Tape, Plastic, White, 600 ft L, 1 in W, 2 mil Thick
|
Empire Flagging Tape, Plastic, Red, 600 ft L, 1 in W, 2 mil Thick
|
Empire Flagging Tape, Plastic, Orange, 600 ft L, 1 in W, 2 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Flagging Tape, Plastic, Blue, 600 ft L, 1 in W, 2 mil Thick
|
Empire Flagging Tape, Plastic, Yellow, 600 ft L, 1 in W, 2 mil Thick
|
Empire Flagging Tape, Plastic, Lime Green, 600 ft L, 1 in W, 2 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PowerLock? 16 ft tape measure has the features you need for accurate inside and outside measurements. A blade-locking mechanism holds the tape measure in place so it wont creep.
|
Tape measures case is made from quality high-impact ABS for durability and the polymer coating on the blades help to withstand abrasion. Stud markings are visible at 16 in and 19.2 in.
|
The #132ME steel slide caliper can measure inside and outside dimensions in inches or millimeters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Barricade Tape, Standard, Barrier Text: Caution, Text Color: Black, Plastic, Yellow Background, 300 ft Length, 3 in Width, 2 mil Thickness
|
Polished lacquer, solid brass construction with replaceable, hardened steel tip. Screw top simplifies attaching string to center of plumb and thru hole ensures easy tightening durable and rust-resistant.
|
Use for quick and accurate measuring of rafter and angle layout. Includes instruction booklet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Find plumb, level and 45 deg quickly and easily with Johnson's 9 in magnetic torpedo level. It features a reinforced aluminum frame and high impact panels for durability and a top-read window for easy viewing. Its rubber magnetic edge allows for convenient hands-free use on ferrous metal surfaces, while the V-groove frame fits on pipe and conduit.
|
The 9 in magnetic torpedo level is durable and accurate. Its bi-material body with rubber end caps protect finished work surfaces from damage. With a heavy-duty aluminum frame, open, top-read vial and pipe groove for use on rounded surfaces, this tools is built for accuracy, ease of use and durability.
|
Ultra thin fingers measure profiles up to 3-1/2 in deep. Includes rule marking on body with inch graduations and stainless steel pins. Used for precise woodworking, installation tile floors or linoleum.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Straight Edge Ruler, Graduation: Inch, Aluminum, 36 in L, 2 in W
|
Measure precisely every time with this 25 ft high-visibility LEVERLOCK? tape measure. When you need to produce professional quality results, use the tape measure's Tru-Zero? hook to help you tackle challenging jobs with reliably accurate reads. Quickly retrieve the tool with its high-visibility case and take full control of blade retraction at the worksite with its push-release, self-locking mechanism. When working outside, the durable, anti-glare blade helps you maintain clear sight even in direct sunlight.
|
Empire Level BUILT ON TRUST Straight Edge Ruler, Graduation: Metric, Aluminum, Silver, 1 m L, 2 in W, 1/8 in Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tape measures case is made from quality high-impact ABS for durability and the polymer coating on the blades help to withstand abrasion. Stud markings are visible at 16 in and 19.2 in.
|
High-impact, high-visibility yellow case with high-contrast blade for easy readability. Three-rivet, corrosion-resistant hook moves to allow accurate inside/outside measurements. 7 ft standout.
|
Pocket size ideal for office or home. High-strength black case. Yellow clad blade is flexible with bold graduations on yellow background. Black markings one side only. Consecutive inches to 1/16ths bottom edge, first 12 in to 1/32nds, 16 in centers designated by diamond, every 12th inch in red.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Crescent Lufkin chrome tapes are a new take on a classic product. Featuring ergonomic case designs for better comfort and improved blade design for easy marking and reading, these tapes are ideal for any job around the site. The Crescent Lufkin chrome tapes are a favorite among those pros who value a comfortable and easy to use product.
|
Entire blade coated with Myla polyester film. Heat-treated spring stands up to repeated usage, positive blade lock won't creep, graduated in 16ths of an inch. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Belt clip on back of case.
|
National Hardware Magnetic Stud Finder, Plastic, Yellow, Dimensions: 2-25/32 in H x 1-5/16 in W x 9/32 in D
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-pressure sensitive vinyl. Yellow tape with (WET PAINT) black lettering. Dimension of 3 in W x 3 mm T.
|
Empire Stake Flag, Flag Width: 2-1/2 in, Flag Height: 3-1/2 in, Orange
|
Empire Stake Flag, Flag Width: 2-1/2 in, Flag Height: 3-1/2 in, Red
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Stake Flag, Plastic/Steel, Pink, 21 in L
|
Empire Stake Flag, Plastic/Steel, Lime, 21 in L
|
Empire Stake Flag, Flag Width: 2-1/2 in, Flag Height: 3-1/2 in, Yellow
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Stake Flag, Blue, 2-1/2 in L, 3-1/2 in W
|
Empire Stake Flag, Flag Width: 2-1/2 in, Flag Height: 3-1/2 in, White
|
Permanently stamped numbers and 1/8 in graduations. Durable protective epoxy finish to prevent rust. Thickness of 1/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-grade tempered steel with yellow powder-coated finish. Reverse reading scale and SAE and metric graduations.
|
Solid heavy-duty aluminum extruded square will not bend, break, rust or corrode. Stamped conversion tables and thick edge makes for a safer saw guide.
|
This Johnny Square? is proudly made in the USA and is the first rafter square on the market to use a continuous scribing notch meaning you can mark and rip lumber to any size you want. This rafter square is solid aluminum die-cast and CNC-machined right here in Wisconsin. And, staying true to its Wisconsin roots, Johnson even included an integrated bottle opener in the center of the square. This square uses deep cast-in graduations that will never peel off, wear off, fade or smudge and also comes with a low-glare, protective powder-coated finish. It also features handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The orange Big 12? Speedlite? square has the same basic features as the aluminum Big 12? Speed? square, but it is constructed of lightweight high-impact structural composite. The weight savings alone is great, but this tool is also ideal for use with siding and other delicate materials, since it will not mar softer finishes.
|
The 8 in Speedlite? level square is the only 8 in Speed? square on the market and also functions as a torpedo level and angle finder. It has many of the same features as the one and only Speed? square, but is constructed of lightweight high-impact composite.
|
Made of durable POLYCASTr material. Molded conversion tables. Easy to see graduations repeated on both sided. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Functions as a saw guide, for special angle measurements and cuts or as a protractor. Aluminum construction for durability. Includes detailed instruction book.
|
Empire POLYCAST I-Beam Level, Vial Type: Top Read, Number of Vials: 3, Vial Material: Acrylic, Vial Positions: Level, Plumb, Accuracy: 0.001 in, Number of Hang Holes: 1, Magnetic/Nonmagnetic: Non-Magnetic, Polycast, Blue, 24 in L, 2.312 in W, 1 in H
|
Work easier, faster and smarter with this level. Its tough Structo-Cast? frame is non conductive and will not scratch fine wood or painted surfaces. The level also comes equipped with durable acrylic vials for easy reading at different angles and the level is field serviceable. Its Quik-Change? replaceable vial covers minimize job downtime.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-impact plastic, top reading feature allows visibility from above. Tinted 360 deg vials make reading easy on the eyes.
|
Tapered edge for easy in an out of pockets and pouches. Aluminum frame. Top read window. Level, plumb and 45??. Made in USA.
|
Lightweight, contour grip, hi-viz orange case is easy to find and fits comfortably in hand. Slide lock design allows for easy control of tape blade, wide base helps keep tape standing upright, removable belt clip and easy-to-read yellow clad blade (not replaceable).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Entire blade coated with heavy-duty Mylar polyester film for unbeatable durability. Two-rivet, corrosion-resistant hook stands up to continuous use. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Die-cast metal case.
|
General Tools 729 4 in slide caliper delivers quick and accurate inside and outside diameter measurements. This slide caliper provides inside and outside readings in both etched and filled 16ths and 32nds graduations. A decimal equivalents chart on the caliper's back side is helpful in making measurement calculations. The durable polished stainless steel construction is coupled with a compact design makes this caliper a great addition to any workbench or toolbox.
|
The #17 square head steel protractor is preferred by machinists, drafts people and mechanics for setting bevels and measuring and transferring angles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Stake Flag, PVC, Orange, 21 in L
|
CH Hanson Stake Flag, PVC, Red, 21 in L
|
CH Hanson Stake Flag, PVC, Pink, 21 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Stake Flag, PVC, Lime, 21 in L
|
CH Hanson Stake Flag, PVC, Blue, 21 in L
|
CH Hanson Stake Flag, PVC, White, 21 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Stake Flag, PVC, Red, 21 in L
|
CH Hanson Stake Flag, PVC, Yellow, 21 in L
|
This marker is required by OSHA for perimeter marking of any above ground construction area, flat roof jobs and open upper-level construction. Perimeter marker is 105 ft L and exceeds the 500 lb required break strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Barricade Safety Tape, Polyethylene, Yellow, 1000 ft L, 3 in W, 1.5 mil Thick
|
Empire Barricade Tape, Standard, 1000 ft L, 3 in W, 2 mil Thick, Plastic Backing, Yellow
|
Empire Barricade Tape, Plastic, Black/Red, 1000 ft L, 3 in W, 2 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Barricade Tape, Standard, Barrier Text: Caution/Cuidado, Text Color: Black, Plastic, Yellow Background, 1000 ft Length, 3 in Width, 2 mil Thickness
|
Johnson's 16 x 24 in framing square is everything a builder needs to get the work done quickly, efficiently and accurately. It includes graduations in 1/8 in, 1/10 in, 1/12 in and 1/16 in as well as octagon scales, rafter tables, brace tables and board foot tables, making it useful for any number of different jobs. And reading those graduations and conversion tables is especially easy thanks to Johnson's thermal-bonded EZ Read? text.
|
Shocking-absorbing end caps; removable shock-absorbing end caps with anti-slip stoppers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable, heavy-duty, cast aluminum frame with pipe groove for use on rounded surfaces. Magnetic strip allows hands-free operation on metal surfaces. Tinted 360 deg vials make reading easy on the eyes.
|
With a Tru-Zero? end hook, a Mylar coated blade and a secure blade lock, the Stanley PowerLock? 25 ft measuring tape rule ensures precise measurements and long-lasting durability.
|
Die-cast metal case holds its own against rough handling. Entire blade coated with heavy-duty "Mylar" polyester film for unbeatable durability. 2-rivet, corrosion-resistant hook stands up to continuous use. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High impact, high visibility, yellow ABS case houses thick, wide yellow blade coated with polymer for enhanced durability. Easy-to-read markings. Easy-wind drum ensures streamlined usage. End hook recoils neatly into contoured case.
|
The #842 precision pencil compass can mark a circle of specified size around a point.
|
Heavy-duty vinyl with 2 in black characters (CAUTION) on 3 in wide yellow tape.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH Hanson Barricade Safety Tape, Polyethylene, Yellow, 1000 ft L, 3 in W, 2 mil Thick
|
CH Hanson Barricade Safety Tape, Polyethylene, Red, 1000 ft L, 3 in W, 2 mil Thick
|
CH Hanson Barricade Safety Tape, Polyethylene, Yellow, 1000 ft L, 3 in W, 2 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Johnson's 16 x 24 in framing square is everything a builder needs to get the work done quickly, efficiently and accurately. It includes graduations in 1/8 in, 1/10 in, 1/12 in and 1/16 in as well as board foot tables and rafter tables, making it useful for any number of different jobs. And those graduations and tables are permanently stamped so you'll never worry about them fading or wearing. This framing square is constructed of steel with a urethane anti-rust coating that is made to last.
|
SCRIBE-GUIDET notches for marking at 1/2 in. and 1/4 in. increments. High visibility markings provide superior readability. 15% wider heel for a secure hold on all jobsite materials. Extruded aluminum more durable than die-cast. Anodized aluminum will not rust or corrode. Permanent laser etched markings provide 2X accuracy over standard stamped squares. On product link to rafter square user manual. Conversion tables for common application needs. Inch graduations. Made in the USA.
|
The Stanley? Premium Quick Square? layout tool is engineered to provide a quick, accurate and repeating means for laying out and cutting the various cuts on common, valley, hip and jack rafters used in roof construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This unique tool is actually five tools in one like a try square, miter square, protractor, line scriber and saw guide. The Speed? square is constructed of durable heavy-gauge aluminum alloy. Includes markings for Swanson's one-number MethodSM of rafter layout and is packaged with the Swanson? blue book of rafter length and roof construction.
|
Precision machined head and True Bluevials ensure squareness to 0.001. Etched stainless steel blade with inch graduations. Machined square head self-aligning drawbolt and a hardened scriber.
|
Heavy duty extruded aluminum frame with powerful, V-grooved working edge that fits on pipe or conduit and full length magnetic edge. True Blue vials are accurate to within 0.0005 in/in in all 10 level and plumb working positions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Find plumb, level and 45 deg quickly and easily with Johnson's 9 in magnetic torpedo level. This aluminum reinforced level features a tapered design, making it a comfortable and convenient fit in your tool pouch or pocket. Its top-read window lets you view the vials easily from any angle and Johnson's SurroundView? vials reflect ambient light, making them easy to read. Its magnetic edge allows for convenient hands-free use on ferrous metal surfaces and the V-groove frame fits perfectly on pipe and conduit.
|
Johnson Pitch and Slope Locator, Measuring Range: 0 o 90 deg, ABS, Dimensions: 4-7/8 in H
|
Johnson Pocket Level, Vial Type: Solid Curved Block, Number of Vials: 1, Vial Material: Plastic, Accuracy: 99, Magnetic/Nonmagnetic: Magnetic, Plastic, Orange, Dimensions: 0.937 in L x 2.75 in W, Includes: Belt Holster
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable and accurate, Johnson's 48 in heavy-duty aluminum straight edge features screened, thermal-bonded graduations in 1/8 and 1/16 in that are bold and easy to read. And its clear, protective anodized finish keeps it protected from wear and tear. The straight edge also features a hanging hole for convenient storage.
|
Empire Magnetic Protractor, Measuring Range: 0 to 360 deg, Polycast
|
Pocket-size stud sensor detects wood/metal studs up to a 3/4 in depth. Easy visual indicators on face of stud sensor for easy readability. LED display and buzzer indicates stud edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-quality aluminum for maximum durability. Protective lacquered coating resists corrosion. Durable black embossed graduations and figures for easy reading. Provides helpful reference conversion tables such as new lumber scale, decimal equivalent table, metric conversion table, formula for squaring a foundation, 45, 60 and 30 deg angle markings, volume and area formulas, wood screw gauge table, nail sizes (common and finish), quantity per pound and depth scale.
|
High tempered aluminum for maximum durability with deep and long wearing 1/8 in graduations on face and back and a protective lacquered coating resists corrosion. Lumber scale, decimal equivalent table, metric conversion table, formula for squaring a foundation, 45, 60 deg, 30 and 176, angle markings, volume and area formulas, wood screw gauge table, nail sizes and depth scale. Tables and information imprinted on both sides of square.
|
The Swanson? Speed? square was first developed by company founder Albert Swanson? in 1925. This innovative tool combines five tools in one like a try square, miter square, saw guide, line scriber and protractor. The Speed? square is die-cast for durability and accuracy. Made of heavy-gauge aerospace aluminum alloy, it is built to last. Black-filled gradations stand out against a matte finish for easy reading. The Speed? square includes the Swanson? blue book of rafter length and roof construction and also features markings for using the Swanson? One-Number? method of rafter layout. The Swanson? Speed? square is our most popular product and remains the most trusted square of its kind.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire True Blue Combination Square, Graduation: 0.0625 in, Stainless Steel Blade, Dimensions: 12 in L
|
Durable, shock-resistant ABS construction. Top read center vial designed for instant readability. Measuring scale adds utility. Non marring material will not damage finished surfaces. High visibility yellow is easy to spot on the jobsite.
|
Hultafors Folding Rule, 1/16 in Graduation, Birch Wood/Steel, Black/Red, 78 in Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
78 in folding rule manufactured from downy birch with Swedish steel joints, enabling thin sections and great flexibility. Brick masons wood rule for spacing brick courses and a traditional 1/16 in scale with black and red markings. Swedish design since 1883.
|
A folding rule manufactured from downy birch with Swedish steel joints, enabling thin sections and great flexibility. Engineering scale with 1/10 th and 1/100 th of a foot and a traditional 1/16 in scale with black and red markings. Swedish design since 1883.
|
Swanson Speed Square, Graduation: 1/16 in, Measuring Angle: 22.5, 30, 45 deg, Aluminum, Gray, 4-1/2 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Straight Edge Ruler, Graduation: Inch, Aluminum, 48 in L, 2 in W
|
Milwaukee Tape measures are nothing but heavy-duty. Featuring nylon bond blade protection and a 5-point reinforced frame, they offer the longest life by resisting contamination wear and increasing protection when dropped. To increase productivity on the jobsite, Milwaukee tape measures feature fractional scale for easy reading and optimized hook designed for scoring. For added utility, Milwaukee tape measures have stamped steel belt clips and are lanyard ready.
|
Milwaukee Tape Measure, Graduation: Fractional, 16 ft L Blade
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get consistent, expert-level results with this 30 ft high-visibility LEVERLOCK? tape measure. Rely on the Tape Measure's Tru-Zero? hook for accurate reads in almost any work environment. Even in crowded tool boxes, you can retrieve the tool box in no time thanks to the included clear holding case. Retract the blade or hold it in place with ease using the push-release, self-locking mechanism. This hand tool helps you maintain clear sight while measuring with its anti-glare, high-durability blade, even when working in bright sunlight.
|
Calculate precise length and width measurements with this single-sided tape measure. The polymer-coated blade withstands abrasion for lasting use and it provides accurate readings. This Vulcan yellow measuring tape has large numbers for high visibility.
|
Zircon Stud Sensor, Battery Type: Alkaline, Battery Voltage: 9 V, Detectable Materials: Metal, Wood, Detection Range: 3/4 in, Indicator Type: Audio, LED Light, Operating Temperature: 20 to 120 deg F, Dimensions: 1.18 in L x 2.23 in W x 5.54 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 4-1/2 in trim square is an everyday carry layout solution. The compact square is 35% smaller in size to easily fit into tight work spaces as well as your pockets and pouches. High-visibility laser etched markings will not wear off after heavy-use, providing you with consistent high-visibility throughout the life of the square. A 1/4 in and 3/8 in dual measurement heel also allows you to perform quick marks. The trim square is backed by our MILWAUKEE? limited lifetime warranty.
|
As a saw guide, stair layout tool or rafter tool, Johnson's 12 in rafter square will help you get the job done accurately and easily. It features Johnson's unique Structo-Cast? molded frame that is both lightweight and durable, as well as permanent molded graduations for making quick and easy measurements. This rafter square comes with handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in. And you'll always find this square quickly in your toolbox thanks to its fluorescent, easy-to-see color.
|
To develop one of the world's premium rafter squares, Johnson first had to engineer the EZ-Read? finish, its revolutionary anti-glare protective coating that diffracts sunlight rather than reflecting it, so it looks as crisp in full sun as it does in the shade. The EZ-Read? finish also increases friction to better secure your square against your lumber when using it as a saw guide. The Johnny Square? is highly durable and accurate. Its solid aluminum body construction with CNC-machined edges ensure an accurate reading every time. This rafter square also features continuous scribing notches that are ideal for ripping at 3-1/2 in and 5-1/2 in as well as handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 12 Inch combination square is durable and accurate. Its blade is made of hard chrome, which is coated to resist rust for long life. With built-in scriber for surface marking, easy-to-read vial and die-cast metal handle, this tool allows for efficient measuring and marking.
|
Johnson's easy-to-use 6 in combination square gives you the accuracy and precision you need for every job. Its stainless steel blade has English graduations of 1/8 in, 1/16 in and 1/32 in as well as metric graduations that are permanently stamped, so you'll never worry about them fading or wearing. It features a durable acrylic vial, heavy-duty cast zinc head with a black, chip-resistant e-coating finish and hardened screw-in scriber that won't fall out so that this combo square can withstand even the roughest jobsite abuse. It was also designed with maximum accuracy in mind, its square head is CNC machined for greater accuracy and the Auto-Lock? blade assembly makes it easier to accurately line up your tool for use.
|
Featuring an impact-resistant acrylic level vial that takes worksite abuse better than other vials. A mainstay in Swanson's tool lineup, this 12 in workhorse also acts as a depth gauge and has CNC machined working surfaces for more reliable accuracy.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty aluminum billet handle. Adjustable 10 in. stainless steel blade. Wingnut positively locks blade.
|
Work easier, faster and smarter with this level. Its tough Structo-Cast? frame is non conductive and will not scratch fine wood or painted surfaces. The level also comes equipped with durable acrylic vials for easy reading at different angles and the level is field serviceable. Its Quik-Change? replaceable vial covers minimize job downtime.
|
Empire I-Beam Level, 3 Vials, Acrylic Vial, Vial Positions: Level, Plumb, Magnetic/Nonmagnetic: Nonmagnetic, Metal, 24 in Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
180-deg rotating vial for a range of situations. Measuring scale printed directly on the level eases layout work. Heavy-duty aluminum I-beam construction provides rigidity and accuracy. Level accuracy of 0.0015 in (0.15 mm/m). 360 deg vials set directly into frame never need adjustment.
|
We know you need the right tape measure to get the job done faster and that's why the Stanley? CONTROL-LOCK? was engineered to strike the ideal balance between size, performance and comfort. Offering a finger brake to control blade retraction, 12 ft of max reach, excellent ergonomics and a durable blade coating to resist abrasion, this tape measure was designed with the professional tradesperson in mind.
|
Introducing biggest evolution of the Swanson Speed Square in almost 100 years. The Speed Square PRO. This revolutionary layout tool born out of the true legacy tool, the Speed Square is packed full of new features and has the same reliable features you have always counted on from the Swanson speed square making layouts even faster and easier. The speed square PRO starts with all the incredible features of the original speed trim square, then takes it up a notch. From a new 22.5 deg angle coming off of the pivot for quick layouts to an additional 5-1/2 in diamond mark for working with 2 x 6 material. It also has 1-1/2 in edge used to measure the width of 2X material for quick framing. The Speed Square PRO is the world's most proficient tool designed for the true professional.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Plumb Bob, 8 oz, Brass, Lacquer, Dimensions: 8.687 in L, Includes: Extra Hardened Steel Tip
|
The SAVAGE? ProScribe? quickly transfers radius or straight lines. Edge allows for no sliver straight line scribing. Grips metal surfaces with magnetic tip. Ideal for contractors and builders. Easy-to-use blade lock hold tape in place. Nylon sleeve protective coating.
|
This measuring tape comes with a handheld hand crank dispenser that it is nestled into. The hand crank makes it incredibly easy to retract your tape up after use neatly so it is never a hassle to measure. It will definitely come in handy for any landscaping jobs. With 100 feet of tape you can measure out lawns and backyards accurately to lay foundations, retaining walls, walkways, patios and much more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Small and compact, easily fits in pocket. Uses powerful rare earth magnets to pinpoint the exact location of screws or nails in a stud and allows hands-free use. Two-way level for ease of marking. Soft grip for easy grabbing and gentle touch, no batteries required.
|
Arc-ScribeT for precision radius layout. Aluminum construction will not rust or corrode. Permanent stamped numbers, graduations and framing tables. Includes 1/8 in., 1/10 in., 1/16 in. stamped graduations. Made in the USA.
|
Johnson's 12 in metal combination square gives you the accuracy and precision you need for every job and was designed to be durable for a lifetime of use. Its stainless steel blade has graduations of 1/8 in, 1/16 in and 1/32 in that are permanently stamped so you'll never worry about them fading or wearing. Similarly, the durable acrylic vial, heavy-duty cast zinc head with a black, chip-resistant e-coating finish and hardened screw-in scriber that won't fall out helps this combo square withstand even the roughest jobsite abuse. It was also designed with maximum accuracy in mind, its square head is CNC machined for greater accuracy and the Auto-Lock? blade assembly makes it easier to accurately line up your tool for use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel etched blade prevents rust and corrosion. Etched markings. Heavy-duty aluminum billet handle. Inch graduations.
|
Heavy duty extruded aluminum frame with powerful full-length magnetic edge. True Blue vials are accurate to within 0.0005 in/in in all 10 level and plumb working positions. Vari-Pitch vial reads slope in 1/8 in increments.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee Tape Measure, Graduation: Fractional, 25 ft L Blade
|
Graduations printed in fractions and decimal equivalents. Rounded orange ABS case fits your hand for comfort and withstands rugged use on the job site. Positive toggle lock holds blade securely at any length. Self-compensating end hook for inside and outside measurements. Built in bumper reduces shock when blade is retracted.
|
Lightweight, high strength, Hi-Viz orange case easy to find on the job; fits perfectly in the hand and into most tape holsters. Bright yellow blade has clear easy-to-read numerals with cushioned blade return. Removable belt clip. Toggle lock is positioned for convenient operation and holds the blade securely.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crescent Lufkin Legacy Tape Measure, Graduation: 1/32, 1/16 in, A2 Blade, 25 ft L Blade, 1 in W Blade, Blade Color: Yellow, Case Finish: Chrome/Mirror, Standout: 8 ft, End Type: Hook, Lock Type: Button, Includes: Belt Clip
|
The Stanley 26 ft/8 m PowerLock? tape rule blade is reinforced BladeArmor? coating for maximum durability. The tape has up to an 7 ft standout. For versatility, it includes both inch and centimeter graduations.
|
PVC blades allow tape to be wound wet and easily cleaned. High-impact ABS case for durability, wide blade with easy-to-read fractional/decimal, inch/foot markings. English formats for versatility. Rubber grip is designed with comfort in mind, easy to find yellow color.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened and tempered bow springs assure uniform tension without side play. Adjusting screw has self-seating washer and nut for quick adjustments. Legs made from special caliper steel with hardened points. Used in marking circles, tracing contours and transferring measurements. Conforms to government specifications GGG-C-95.
|
Useful measurement transfer tool when working with round stock or oddly shaped materials. Hardened and tempered bow springs assure uniform tension without side play. Adjusting screw has self-seating washer and nut for quick adjustments. Legs made from special caliper steel with hardened measurement points. Conforms to government specifications GGG-C-95.
|
Designed for homeowners, do-it-yourselfers, woodworkers, hobbyists, decorators and gardeners. Helps you quickly figure project material quantities, linear distances and material costs. Helps you design, apply, install and finish your improvements with precision and confidence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Locates the wood or metal studs up to 3/4 in deep. Red LEDs light up every time a stud edge is approached. An audio alert and green LED signals when the stud edge is reached. Should scanning begin over a stud, over-the-stud indicator alerts the user to start the scan in a new location. TruCal technology calibrates to any wall's density and a steady green LED TruCal light alerts the user when the tool is calibrated and ready to scan.
|
Aluminum construction with anodized finish will not rust or corrode. Permanently stamped numbers and graduations in 1/8", 1/10", 1/12" and 1/16"; octagon scales, rafter tables and board foot tables. Used in general carpentry and for laying out rafters and stair stringers. CS7 features laser etched EZ Read graduations and numbers on black anodized body.
|
Solid aluminum extruded square will not bend or break and has graduated notches for pulling layout lines, stamped conversion tables. Mark or cut boards up to 12 in wide. Thicker frame design ensures safe use as a saw guide. Includes instruction manual with complete rafter tables.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Work easier, faster and smarter with this I-beam level. Its corrosion-resistant aluminum frame is durable to ensure a long working life and that frame is protected by shock absorbing end caps if the level is accidentally dropped. The level also comes equipped with durable acrylic vials for easy reading at different angles as well as a top read window allowing the user to stand over the work to view the vials. Marking cuts, centerlines and drill points is simplified with the level's ruled working edge.
|
Find plumb, level, 45 deg and pitch to 1/2 in per foot quickly and easily with Johnson's 12 in magnetic torpedo level. Its top-read window lets you view the level vial easily from any angle and Johnson's SurroundView? vial surrounds reflect ambient light, making the vials easy to read. Its magnetic edge allows for convenient hands-free use on ferrous metal surfaces, while the V-groove frame fits on pipe and conduit.
|
Bold red and black markings contrast against white or natural pine finishes. Clear, abrasive-resistant coating, riveted lock joints, brass-plated end clasps and strike plates prevent wear. Graduated slide rule extends up to 6 in. Slide rule runs under friction in T-slot and stops at each end to prevent slide from falling out. Marked both sides and both edges. Graduated to 1/16ths of an inch, 16 in stud centers in red, regular outside markings. Rules with hook the zero falls at inside of hook, for distance measuring. Rules with flat, inside markings, numbering begins on inside of rule.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Magnetic end hook is a time-saver for framers, HVAC installers and more. Powerful dual magnets can also serve as a pick-up tool. Orange with a non-slip, co-molded rubber grip, ABS case stands up to the toughest work site. Non-slip rubber blade lock button. Use for one-man measurements of steel framing and drop ceiling grids.
|
Milwaukee Tape measures are nothing but heavy-duty. Featuring nylon bond blade protection and a 5-point reinforced frame, they offer the longest life by resisting contamination wear and increasing protection when dropped. To increase productivity on the jobsite, Milwaukee tape measures feature fractional scale for easy reading and optimized hook designed for scoring. For added utility, Milwaukee tape measures have stamped steel belt clips and are lanyard ready.
|
Make precise inside or outside measurements with the 35 ft x 1 in PowerLock? tape measure from Stanley. This durable, Mylar coated tape measure has a Tru-Zero? end hook that can work as a pivot for convenient and accurate drawing of circles and arches.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Decimal scale tape rule with die-cast metal case. Blade coated with heavy-duty Mylar polyester film for durability. Two rivet, corrosion-resistant hook stands up to continuous use. Special Tru-Zero hook does double duty as a pivot for drawing circles and arcs.
|
|
The Crescent Lufkin Control Series? is right at home in the hands of professionals who want a tape measure that works as hard as they do. The 1-3/16 in wide tape with extra large print has 12 ft of true standout to tackle any job and the matte finish both reduces glare and protects the blade, ensuring that it holds up through heavy use. The finger brake beneath the tape's feed allows the user to control the blade without risk of pinching and the blade can be locked in place with the wide lock button protected by over mold rails. Of course, the excellent in-class durability of the Control Series? doesn't stop at the lock button rails - the ergonomic case survived 50+ 1 story drops in real life strength testing. The Control Series? excels, from the integrated tether point to the 360 deg grip end hook.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crescent Lufkin Autolock 700 Tape Measure, 25 ft L Blade, 1 in W Blade, Blade Color: Yellow, Case Color: Orange, Case Material: ABS, End Type: Hook, Lock Type: Automatic
|
Calculate precise length and width measurements with this single-sided tape measure. The polymer-coated blade withstands abrasion for lasting use and it provides accurate readings. This Vulcan yellow measuring tape has large numbers for high visibility.
|
High impact, high visibility, yellow ABS case houses thick, wide yellow blade coated with polymer for enhanced durability. Easy-to-read markings. Easy-wind drum ensures streamlined usage. End hook recoils neatly into contoured case.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polished lacquer, solid brass construction with replaceable, hardened steel tip. Screw top simplifies attaching string to center of plumb and thru hole ensures easy tightening durable and rust-resistant.
|
For finding a plumb (vertical) line over a long distance. High-quality plated brass, lacquered with replaceable hardened tips. Removable cap for quick, easy and accurate centered string installation.
|
Find plumb, level and 45 deg quickly and easily with Johnson's USA made 9 in magnetic torpedo level. This durable aluminum level features a top read window for easy viewing and Johnson's Glo-View? glow in the dark vial surrounds to ensure the level can be read even on dimly-lit jobsites. This level also features powerful GripTight? rare earth magnets that hold to flat or round ferrous surfaces for convenient hands-free use, while the V-groove frame fits on pipe and conduit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Multi-Mark? is an incredibly handy multi-purpose marking and measuring tool, ideal for a wide variety of household and jobsite applications. The Multi-Mark? features three different scale configurations, a built-in level, a 3/16 in (5 mm) reveal gauge and much more. Whether you need to transfer a measurement, lay out mitered corners or align and straighten project parts, the Multi-Mark? is the only tool you'll need to get the job done.
|
We know you need the right tape measure to get the job done faster and that's why the Stanley? CONTROL-LOCK? was engineered to strike the ideal balance between size, performance and comfort. Offering a finger brake to control blade retraction, 12 ft of max reach, excellent ergonomics and a durable blade coating to resist abrasion, this tape measure was designed with the professional tradesperson in mind.
|
Marked both sides, both edges. Graduated to 1/16ths both edges. 16 in stud centers marked in red. Regular outside markings. For rules with inside markings, numbering begins on inside of rule with measurement laying close to work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy and fast to use by bricklayers. Graduated vertical inches to 1/16ths, both edges. Brick Mason's scale on inside, red course counters numbered consecutively. Regular outside markings in black.
|
For measuring left to right, right to left. Marked both sides. Graduated in feet, inches and 1/16ths on both sides and both edges. Flat inside markings lie close to the work.
|
The Crescent Lufkin Control series is right at home in the hands of professionals who want a tape measure that works as hard as they do. The 1-3/16 in wide tape with extra-large print has 12 ft of true standout to tackle any job, and the matte finish both reduces glare and protects the blade, ensuring that it holds up through heavy use. The finger brake beneath the tape's feed allows the user to control the blade without risk of pinching, and the blade can be locked in place with the wide lock button protected by over-mold rails. Of course, the best-in-class durability of the Control Series doesn't stop at the lock button rails - the ergonomic case survived 50+ 1-story drops in real life strength testing. The Control Series excels, from the integrated tether point to the 360 deg grip end hook.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Crescent Lufkin chrome tapes are a new take on a classic product. Featuring ergonomic case designs for better comfort and improved blade design for easy marking and reading, these tapes are ideal for any job around the site. The Crescent Lufkin chrome tapes are a favorite among those pros who value a comfortable and easy to use product.
|
Crescent Lufkin COLORmaxx Tape Measure, Graduation: 1/8 in, 1 mm, Dual-Sided Blade, 100 ft L Blade, 3/8 in W Blade, Blade Thickness: 0.005 in, Blade Color: Black/Yellow, Steel Blade, Case Type: Closed, Case Color: Bright Orange, Case Material: Plastic, End Type: Hook, Rewind Type: Manual, Resists: Impact
|
Johnson's 16 x 24 in framing square is everything a builder needs to get the work done quickly, efficiently and accurately. It includes graduations in 1/8 in, 1/10 in, 1/12 in and 1/16 in as well as octagon scales, rafter tables, brace tables and board foot tables, making it useful for any number of different jobs. And reading those graduations and conversion tables is especially easy thanks to Johnson's laser-etched EZ Read? text. This framing square's aluminum construction makes it conveniently lightweight while also keeping the tool safe from rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Anodized aluminum construction will not rust. High visibility, deep stamped, long lasting graduations of 1/8", 1/10", 1/12", 1/16" and conversion tables; 1/8" thick.
|
Rigid I-beam cross-section features low-profile, shock-absorbing end caps for durability, 180 deg rotating view for a range of situations. Powder-coated frame withstands nicks and offers a comfortable hold. Measuring scale printed directly on the level eases layout work. Clear-acrylic vial covers for easy readability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy readability, 7' standout, secure blade lock won't creep. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Entire blade coated with Mylar polyester film for added durability, heat-treated spring stands up to repeated use, 16" and 19.2" stud center markings. Three-rivet, corrosion-resistant hook moves for accurate inside/outside measurements.
|
For accurate measurements on PVC, conduit and pipe up to 2 in Dia use a SAVAGE? GripLine? tape. The tape measure features large numbers, 1-1/16 in wide blade and an exclusive magnetic tip. The large numbers are displayed on top and bottom for increased user readability. The magnetic tip can be used to attach to a metal surface such as a metal beam or window frame. The tape measure can clip onto a carpenter, contractor or plumber's tool belt and is compact enough to easily fit into a tool box.
|
Locate the edges of wood and metal studs while being warned of the presence of live, unshielded AC electrical wiring with the StudSensor? Pro35. It's innovative contoured design and bright user-friendly interface makes finding studs quick and easy. Securely anchor pictures, mirrors, shelves and more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 7 in rafter square has a stronger frame and is the most versatile rafter square. Scribe notches from 1 to 6 in allow you to easily and accurately rip lumber. A 1 in cutout in the rafter square helps prop pipe allowing you to cut it more easily on the job site. A reinforced frame gives you more durability on the job site while high visibility laser etched markings make the square easier to read.
|
Precision machined head and True Blue vials ensure squareness to 0.001. Etched stainless steel blade with inch graduations. Heavy-duty machined square head. Self-aligning drawbolt, hardened scriber.
|
We know you need the right tape measure to get the job done faster and that's why the Stanley? CONTROL-LOCK? was engineered to strike the ideal balance between size, performance and comfort. Offering a finger brake to control blade retraction, 12 ft of max reach, excellent ergonomics and a durable blade coating to resist abrasion, this tape measure was designed with the professional tradesperson in mind.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight orange, high strength case fits easily into most tape holsters. Bright yellow blade has clear easy-to-read numerals. Toggle lock is positioned for convenient operation. Holds the blade securely in any position. Virtually unbreakable quad hook. 4-rivet for extra strength. Cushioned blade return. Removable belt clip.
|
Graduations printed in fractions and decimal equivalents. Rounded blue ABS case fits your hand for comfort and withstands rugged use on the job site. Positive toggle lock holds blade securely at any length. Self-compensating end hook for inside and outside measurements. Built in bumper reduces shock when blade is retracted.
|
Lightweight, high-strength, Hi-Viz orange case easy to find on the job. Fits ideally in the hand and into most tape holsters. Bright yellow blade has clear easy-to-read numerals with cushioned blade return. Removable belt clip. Toggle lock is positioned for convenient operation and holds the blade securely.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crescent Lufkin Tape Measure, Graduation: Inch, Feet, Dual Blade, 25 ft L Blade, 1-3/16 in W Blade, Blade Color: Black, Steel Blade, Case Material: Rubber, Standout: 10 ft, End Type: Hook
|
Introducing the toughest tapes to ever hit a jobsite. Shockforce brings new meaning to the term high-performance with a full 14 ft of standout and the ability to survive a 100 ft drop onto solid concrete. Add in a diamond coated 360 deg end hook that delivers 50% more gripping power, a two sided blade with vertical markings on the back and class leading ergonomics and you have a tape that's destined to be the new standard for trade professionals.
|
Shockforce Nite Eye, with all the capabilities of the original Shockforce plus, the Nite Eye high visibility green-on-matte black blade. Made for superior legibility in any light condition, from bright sun to dim interiors, Shockforce Nite Eye helps you measure even faster. Shockforce Nite Eye is made to last and has a two-sided, 14 ft standout blade and diamond-abrasive coated end hook to help you measure faster.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 100 ft steel long tape features a blade-release button and a 5 to 1 gear ratio for fast blade rewinds for efficiency. The long tape's stainless steel crank arm provides durability for demanding jobsites. A spring-loaded carabiner attachment offers great portability.
|
Functions as a saw guide, bevel or protractor and is made of heavy-duty aluminum for durability. Comes with an adjustable arm and features Common, Jack and Hip and valley scales for various applications. Black body with yellow graduations provides maximum readability in all light conditions.
|
Johnson's easy-to-use 16 in combination square gives you the accuracy and precision you need for every job. Its stainless steel blade has English graduations of 1/8 in, 1/16 in and 1/32 in as well as metric graduations that are permanently etched in black for easy readability. It features a durable acrylic vial, heavy-duty cast zinc head with a black, chip-resistant e-coating finish and hardened screw-in scriber that won't fall out so that this combo square can withstand even the roughest jobsite abuse. It was also designed with maximum accuracy in mind, its Auto-Lock? blade assembly makes it easier to accurately line up your tool for use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire 500 I-Beam Level, Vial Type: Mono, Number of Vials: 3, Vial Material: Acrylic, Vial Positions: (1) Level, (2) Plumb, Accuracy: 0.0005 in/in, 0.29 deg, 0.5 mm/M, Magnetic/Nonmagnetic: Non-Magnetic, Aluminum, 24 in L, 2-1/4 in W, 1 in H
|
Empire I-Beam Level, Number of Vials: 3, Vial Material: Acrylic, Magnetic/Nonmagnetic: Non-Magnetic, Aluminum, Silver, 48 in L
|
Heavy-duty extruded aluminum frame with powerful rare earth magnets for 10 lb. of holding power, V-grooved working edge that fits on pipe or conduit and full length magnetic edge. True Blue vials are accurate to within 0.0005 in per inch in all 10 level and plumb working positions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With four vials, this 12 in magnetic torpedo level accurately measures plumb, level, 45 deg and slope. Its solid aluminum frame is highly durable to survive even the toughest jobsite abuse. It was also designed to be easy and convenient to use its top-read window lets you view the level vial easily from any angle and the SurroundView? vials are larger than the competition's at 1/2 in Dia and reflect ambient light, making them exceptionally easy to read. This level also features powerful GripTight? magnets that hold to flat or round ferrous metal surfaces for convenient, hands-free use, while the V-groove frame fits easily on pipe and conduit.
|
Since 1869, Crescent Lufkin? has stood at the forefront of measuring tools and equipment, with industry leading quality and innovation. We enable the consumer or professional user with reliable, precise, durable lines of products, including our wooden measuring rules. Since patenting the Lufkin? folding rule in 1919, we've been manufacturing top quality tools, like this rule which features brass joints, clear graduation markings and highly visible red root figures.
|
Milwaukee Tape measures are nothing but heavy-duty. Featuring nylon bond blade protection and a 5-point reinforced frame, they offer the longest life by resisting contamination wear and increasing protection when dropped. To increase productivity on the jobsite, Milwaukee tape measures feature fractional scale for easy reading and optimized hook designed for scoring. For added utility, Milwaukee tape measures have stamped steel belt clips and are lanyard ready.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 16 ft compact wide blade magnetic tape measure has up to 15 ft of reach and a magnet that easily attaches to EMT and steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. Built-to-withstand the jobsite, the compact measuring tapes are constructed with a five-point reinforced frame for impact resistance.
|
Our 16 ft wide blade tape measure has the longest reach and straightest standout in the industry. The 16 ft of reach allows you to take long measurements on your own and reach further on the jobsite. The blade design delivers the straightest standout, reducing arc in the blade for efficient and accurate measuring. The tape measures are wear and impact-resistant with nylon bond blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. Built-to-withstand the jobsite, the measuring tapes are constructed with a five-point reinforced frame for impact resistance.
|
PVC blades allow tape to be wound wet and easily cleaned. High-impact ABS case for durability, wide blade with easy-to-read fractional/decimal, inch/foot markings. English formats for versatility. Rubber grip is designed with comfort in mind, easy to find yellow color.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Open four arm frame design protects blade, does not trap dirt in case. Lightweight, strong, easy to handle and rewind, orange case is easy to find and two material grip is comfortable to use. Yellow clad fiberglass blade impervious to moisture. Folding end hook for true-zero measurements. Feet and inches graduated to 8ths; numbered feet and instantaneous feet.
|
StudSensor? Pro SL-AC stud finder locates the edges of wood and metal studs and joists behind walls, floors and ceilings. Patented SpotLite? pointing system shines a beam of light on the wall to identify the target and WireWarning? detection indicates the presence of live AC voltage. Its tough, ergonomic housing withstands everyday jobsite use.
|
Empire Barricade Tape, 500 ft L, 3 in W, 7 mil Thick, Yellow
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Barricade Tape, Reinforced, Barrier Text: Danger/Peligro, Text Color: Black, Plastic, Red Background, 500 ft Length, 3 in Width, 7 mil Thickness
|
Extra thick aircraft-grade aluminum maximizes durability and maintains accurate square. Black finish is treated to resist corrosion. Embossed graduations are painted yellow for readability in all light conditions. Markings include brace measures, octagon scale, board measures and rafter table. Graduation (back) 1/16 in, 1/10 in, 1/12 in, (face) 1/16 in, 1/8 in.
|
The Big 12? is seven tools in one like a framing square, try square, miter square, protractor, saw guide, stair gauge and out-of-square corner angle finder. It's constructed of heavy-gauge aluminum alloy and includes the layout bar for use in determining out-of-square corners. Also included are the Swanson? blue book for roof and stairway layout and layout bar with hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Etched, hard chrome-plated blades are rust-resistant and made to last with a precision machined work surface for improved accuracy. Built-in scriber for surface marking, easy-to-read vial and high-visibility yellow, die-cast handle with brass hardware for durability.
|
Work faster, easier and more accurately with Johnson's levels. This box level features solid block acrylic vials for durability that will never fog, leak or break, while the protective non-marring end caps protect the level from drops and impact. Because precision is essential, Johnson precision milled the edges to ensure frame accuracy. It has also been designed to make your job easier. When working in poorly lit areas, the SurroundView? vials reflect ambient light to keep them easy to read and the level's ergonomic hand grips provide a comfortable, sure grip every time.
|
Work easier, faster and smarter with this I-beam level. Its corrosion-resistant aluminum frame is durable to ensure a long working life and that frame is protected by shock-absorbing end caps if the level is accidentally dropped. The level also comes equipped with durable acrylic vials for easy reading at different angles as well as a top-read window allowing the user to stand over the work to view the vials. Marking cuts, centerlines and drill points is simplified with the level's ruled working edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Plumb Bob, 16 oz, Brass, Lacquer, Dimensions: 8.687 in L, Includes: Extra Hardened Steel Tip
|
Able to survive drops up to 100 ft, this ToughSeries? 16 ft tape measure is the model choice for toughness. Easily execute long measurements without assistance with 16 ft of max reach. Versatile ToughSeries? tape measures allow you to conveniently measure from any angle and are the first in the DEWALT family to have double-sided print. Efficiently measure metal objects with a removable hook magnet while patented hook connection technology offers full control as you work. Defend against product wear-and-tear with the 16 ft tape measure hook's 6 in Rip-Shield? blade coating while the protective covering delivers optimized durability.
|
The STANLEY 100 ft by 3/8 in FATMAX? long tape rule makes rewinding a breeze with a 3-to-1 gear drive for faster rewind. A stainless steel blade ensures long life while a steel roller cage protects the case from being cut by blade curing retraction. The high-impact ABS case withstands rugged conditions and a rubber, slip-resistant grip assures a solid hold. The Tru-Zero? end hook allows accurate inside and outside measurements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This steel tape (ST_3X and ST_Y) Series is great for those who need a longer tape but like the blade protection that a closed house offers. They slip easily into a pocket, purse, tool pouch or tool belt. The ST_Y versions come with a belt clip. The cases are protected by an impact reducing rubber grip that makes it easier to hang on to them.
|
Aluminum construction with powder coated finish. Number of vials: 3, Vial Positions: 0, 45, 90 deg. 24 in L.
|
Johnson's 3700 I-beam level was designed to be durable and easy to use - so much so that it has been the standard in the industry for over 30 years. Its heavy-duty aluminum frame ensures accuracy and is durable enough to withstand even the roughest jobsite abuse and that frame is protected by shock-absorbing end caps if the level is accidentally dropped. The level also comes equipped with replaceable, durable acrylic vials that are impact resistant along with a top-read window allowing the user to stand over the work to view the vials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A level is only useful if you can read the vials. This level comes equipped with oversized 1/2 in vials. Not only are the vials themselves easy to read, but the level has more vials than competitive models in 48 in and longer lengths, meaning the vials are always within eyeshot, even at awkward angles. Finally, Johnson's SurroundView? technology maximizes visibility and top read windows allow the user to stand over the work to view the vials. This I-beam level is a ideal fit for general contractors and drywallers, although it's versatility makes it a must-have for homeowners as well. This non-magnetic level is preferred when working with wood. For use on steel studs or doorframes, consider the magnetic model 1234 I-beam level.
|
Empire True Blue Magnetic Billet Torpedo Level, Vial Type: e-BAND High Contrast, Number of Vials: 4, Vial Positions: 45 deg, Level, Plumb, VARI-PITCH, Accuracy: 0.0005 in/in, Magnetic/Nonmagnetic: Magnetic, Aluminum, Silver, 8 in L, 2 in W
|
Hy-Ko Flagging Tape, Plastic, Orange, 150 ft L, 1-1/16 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable and accurate, Johnson's 72 in heavy-duty aluminum straight edge features screened, thermal-bonded graduations in 1/8 in and 1/16 in that are bold and easy to read. And its clear anodized finish keeps it protected from wear and tear. The straight edge also features a hanging hole for convenient storage.
|
Our 25 ft compact wide blade magnetic tape measure has up to 15 ft of reach and a magnet that easily attaches to EMT and steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. Built-to-withstand the jobsite, the compact measuring tapes are constructed with a five-point reinforced frame for impact resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eliminate the guesswork with this center detect stud finder that has a detection depth of 3/4 in for wood and metal. While traditional stud finders locate the edge of the stud, this one locates the center for a more efficient read. The finder is constantly calibrating to save time during use. Once the stud is located, an audible alert and directional LED arrows clearly notify the user. You can easily mark the center of the stud with the center marking channel.
|
CH Hanson Reinforced Barricade Tape, Polyethylene, Yellow, 500 ft L, 3 in W, 5 mil Thick
|
CH Hanson Reinforced Barricade Tape, Polyethylene, Red, 500 ft L, 3 in W, 5 mil Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Empire Rafter Square, Graduation: 0.13 in, Measuring Angle: 90 deg, Aluminum, Blue, 12 in L, 11.9 in W
|
As a saw guide, stair layout tool or rafter tool, Johnson's 12 in rafter square will help you get the job done accurately and easily. Its solid aluminum body construction with CNC machined edges provide greater accuracy and durability, while the low-glare, protective powder-coated finish makes the permanent graduations and numbers easy to read. This square also features scribe notches starting at 1-3/4 in that are useful when transferring outside increments from the pivot point and handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in.
|
To develop one of the world's premium rafter squares, Johnson first had to engineer the EZ-Read? finish, its revolutionary anti-glare protective coating that diffracts sunlight rather than reflecting it, so it looks as crisp in full sun as it does in the shade. The EZ-Read? finish also increases friction to better secure your square against your lumber when using it as a saw guide. The Johnny Square? is highly durable and accurate. Its solid aluminum body construction with CNC-machined edges ensure an accurate reading every time. This rafter square also features continuous scribing notches that are ideal for ripping at 1-1/2 in, 3-1/2 in and 5-1/2 in as well as handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in.
|
|
|
