|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch Impact Tough? Titanium Drill Bits provide 2X life over standard impact drill bits. Designed for use in the higher torque impact drill/drivers, they have an upgraded tip design for no-skate starts and a titanium cooling shield thanks to the titanium nitrate coating. The coating provides less friction and thus less generated heat. The bits have impact-rated shanks. Electricians, plumbers and HVAC pros will appreciate the tough construction of the bit, rated for heavy-gauge carbon steels, as well as light-gauge metal and hardwood applications.
|
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M-2 high-speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications. Split point ensures a true start and eliminates bit walking.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16"" and larger have three flats on the shank for a better grip on the chuck. Jobber length."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
"High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16"" and larger have three flats on the shank for a better grip on the chuck. Jobber length."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
IRWIN Jobber Drill Bit, #36 Diameter, Spiral Flute, 1-7/16 in Flute Length, Straight Shank, 0.107 in Shank Diameter, Chisel Point, 118 deg Point, M-2 Grade, HSS Cutting Edge, HSS, 2-1/2 in Overall Length, Right Hand Cutting Direction, Applicable Materials: Metal, Plastic, Wood
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
Built for speed and long life, powers through hard metals with ease. A split-point tip starts on contact and eliminates bit walking for helps to increased control. Heavy-duty cobalt delivers 4X more life than black oxide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
|
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
Milwaukee Cobalt RED HELIX? drill bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35 deg helix angle, which ends at 15 deg, the cobalt bits with RED HELIX? provide Rapid Chip Removal limiting heat build-up to Stay Sharper Longer. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provide up to 10X life vs black oxide drill bits but can be used in all twist drilling applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee Cobalt RED HELIX? drill bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35 deg helix angle, which ends at 15 deg, the cobalt bits with RED HELIX? provide Rapid Chip Removal limiting heat build-up to Stay Sharper Longer. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provide up to 10X life vs black oxide drill bits but can be used in all twist drilling applications.
|
Milwaukee Cobalt RED HELIX? drill bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35 deg helix angle, which ends at 15 deg, the cobalt bits with RED HELIX? provide Rapid Chip Removal limiting heat build-up to Stay Sharper Longer. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provide up to 10X life vs black oxide drill bits but can be used in all twist drilling applications.
|
Milwaukee Cobalt RED HELIX? drill bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35 deg helix angle, which ends at 15 deg, the cobalt bits with RED HELIX? provide Rapid Chip Removal limiting heat build-up to Stay Sharper Longer. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provide up to 10X life vs black oxide drill bits but can be used in all twist drilling applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
Made of industrial strength cobalt for optimum life and durability with maximum speed in stainless steel and other hard metals. Tip starts on contact and eliminates bit walking.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Built for speed and long life, powers through hard metals with ease. A split-point tip starts on contact and eliminates bit walking for helps to increased control. Heavy-duty cobalt delivers 4X more life than black oxide.
|
|
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Used in repetitive metal drilling with portable drills or stationary drill press. Jobber length.
|
|
Built for speed and long life, powers through hard metals with ease. A split-point tip starts on contact and eliminates bit walking for helps to increased control. Heavy-duty cobalt delivers 4X more life than black oxide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4 in hex shank.
|
|
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
|
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"High speed steel with a 135 degree split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16"" and larger have three flats on the shank for a better grip on the chuck. Jobber length."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck.
|
Milwaukee Cobalt RED HELIX? drill bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35 deg helix angle, which ends at 15 deg, the cobalt bits with RED HELIX? provide Rapid Chip Removal limiting heat build-up to Stay Sharper Longer. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provide up to 10X life vs black oxide drill bits but can be used in all twist drilling applications.
|
Milwaukee Cobalt RED HELIX? drill bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35 deg helix angle, which ends at 15 deg, the cobalt bits with RED HELIX? provide Rapid Chip Removal limiting heat build-up to Stay Sharper Longer. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provide up to 10X life vs black oxide drill bits but can be used in all twist drilling applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Avanti Pro Drill Bit, Percussion, 1/8 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 3 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills
|
Avanti Pro Drill Bit, Percussion, 5/32 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 3 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
Daredevil? Spade bits are designed for professional users seeking speed, ease of use and hole quality. A full-cone threaded tip pulls the bit through the material with less effort and vibration than other spade bits. The contoured paddle delivers faster chip removal, hex shank with power groove reduces slippage. Up to 10X faster than conventional spade bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Daredevil? Spade bits are designed for professional users seeking speed, ease of use and hole quality. A full-cone threaded tip pulls the bit through the material with less effort and vibration than other spade bits. The contoured paddle delivers faster chip removal, hex shank with power groove reduces slippage. Up to 10X faster than conventional spade bits.
|
Diablo SPEEDemon Spade Drill Bit, 3/8 in Diameter, 4 in Overall Length
|
Diablo SPEEDemon Spade Drill Bit, 1/2 in Diameter, 4 in Overall Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo SPEEDemon Spade Drill Bit, 5/8 in Diameter, 4 in Overall Length
|
Diablo SPEEDemon Spade Drill Bit, 3/4 in Diameter, 4 in Overall Length
|
Pilot drill bit for bimetal hole saws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal chuck key holder attaches your chuck key directly to your drill cord to help keep it where you need it. 30252 fits most brands of 1/4 in and 3/8 in chuck keys and 30253 is universal. Black rubber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IRWIN Jobber Drill Bit, #7 Diameter, Spiral Flute, 2-7/16 in Flute Length, Straight Shank, 0.2 in Shank Diameter, Chisel Point, 118 deg Point, M-2 Grade, HSS Cutting Edge, HSS, 3-5/8 in Overall Length, Right Hand Cutting Direction, Applicable Materials: Metal, Plastic, Wood
|
|
Milwaukee Cobalt RED HELIX? drill bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35 deg helix angle, which ends at 15 deg, the cobalt bits with RED HELIX? provide Rapid Chip Removal limiting heat build-up to Stay Sharper Longer. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provide up to 10X life vs black oxide drill bits but can be used in all twist drilling applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M-2 high-speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications. Split point ensures a true start and eliminates bit walking.
|
High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4 in hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Avanti Pro Drill Bit, Percussion, 3/16 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 4 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills
|
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4"" quick change systems; hole for bit storage and wire pulling."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16"" and above for better chuck grip. Jobbers length."
|
"High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16"" and above for better chuck grip. Jobbers length."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel (heat-treated).
|
Built for speed and long life, powers through hard metals with ease. A split-point tip starts on contact and eliminates bit walking for helps to increased control. Heavy-duty cobalt delivers 4X more life than black oxide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial strength Cobalt for optimum life and durability; pilot point tip starts on contact and eliminates bit walking in stainless steel and other hard metal applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
|
Bosch BlueGranite Turbo??? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills and impact drivers. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo's SPEEDemon ??? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong??? for increased shank stability and durability in cordless and corded impact and drill drivers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4"" quick change systems; hole for bit storage and wire pulling."
|
"Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4"" quick change systems; hole for bit storage and wire pulling."
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4"" quick change systems; hole for bit storage and wire pulling."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4"" quick change systems; hole for bit storage and wire pulling."
|
Daredevil? Spade bits are designed for professional users seeking speed, ease of use and hole quality. A full-cone threaded tip pulls the bit through the material with less effort and vibration than other spade bits. The contoured paddle delivers faster chip removal, hex shank with power groove reduces slippage. Up to 10X faster than conventional spade bits.
|
Diablo SPEEDemon Spade Drill Bit, 1/4 in Diameter, 10 mm Shank Diameter, HSS Cutting Edge, 6 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo SPEEDemon Spade Drill Bit, 5/16 in Diameter, Hex Shank, 10 mm Shank Diameter, HSS Cutting Edge, 6 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Diablo SPEEDemon Spade Drill Bit, 3/8 in Diameter, Hex Shank, 10 mm Shank Diameter, HSS Cutting Edge, 6 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Diablo SPEEDemon Spade Drill Bit, 7/16 in Diameter, Hex Shank, 10 mm Shank Diameter, HSS Cutting Edge, 6 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo SPEEDemon Spade Drill Bit, 7/8 in Diameter, 4 in Overall Length
|
Diablo SPEEDemon Spade Drill Bit, 1 in Diameter, 4 in Overall Length
|
Diablo SPEEDemon Spade Drill Bit, 1-1/8 in Diameter, 4 in Overall Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Bosch line of metal drill bits offers a solution for every professional application. Each bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch. Bosch black oxide bits offer great durability, speed and selection to support most general-purpose applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16"" and above for better chuck grip. Jobbers length."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16"" and above for better chuck grip. Jobbers length."
|
"High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16"" and above for better chuck grip. Jobbers length."
|
"High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16"" and above for better chuck grip. Jobbers length."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coated in heavy-duty titanium for long life and equipped with a 135 deg speed tip that helps to reduce walking, DeWALT? titanium drill bits are ideal for drilling light-gauge metals. A parabolic flute design improves chip ejection while drilling.
|
Coated in heavy-duty titanium for long life and equipped with a 135 deg speed tip that helps to reduce walking, DeWALT? titanium drill bits are ideal for drilling light-gauge metals. A parabolic flute design improves chip ejection while drilling.
|
Milwaukee Cobalt RED HELIX? drill bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35 deg helix angle, which ends at 15 deg, the cobalt bits with RED HELIX? provide Rapid Chip Removal limiting heat build-up to Stay Sharper Longer. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provide up to 10X life vs black oxide drill bits but can be used in all twist drilling applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4 in hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch BlueGranite Turbo??? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills and impact drivers. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo's SPEEDemon ??? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong??? for increased shank stability and durability in cordless and corded impact and drill drivers.
|
"Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4"" quick change systems; hole for bit storage and wire pulling."
|
Daredevil? Spade bits are designed for professional users seeking speed, ease of use and hole quality. A full-cone threaded tip pulls the bit through the material with less effort and vibration than other spade bits. The contoured paddle delivers faster chip removal, hex shank with power groove reduces slippage. Up to 10X faster than conventional spade bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo SPEEDemon Spade Drill Bit, 1/2 in Diameter, Hex Shank, 10 mm Shank Diameter, HSS Cutting Edge, 6 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo SPEEDemon Spade Drill Bit, 9/16 in Diameter, Hex Shank, 10 mm Shank Diameter, HSS Cutting Edge, 6 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
High speed steel with a 135 deg split point that eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No-spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"High speed steel features a black body and gold flute with Turbomax tip for burr-free holes. Exact centering; no walking on straight and curved surfaces. Three flatted shank on 3/16"" and above for better chuck grip. Jobbers length."
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coated in heavy-duty titanium for long life and equipped with a 135 deg speed tip that helps to reduce walking, DeWALT? titanium drill bits are ideal for drilling light-gauge metals. A parabolic flute design improves chip ejection while drilling.
|
Coated in heavy-duty titanium for long life and equipped with a 135 deg speed tip that helps to reduce walking, DeWALT? titanium drill bits are ideal for drilling light-gauge metals. A parabolic flute design improves chip ejection while drilling.
|
Milwaukee Cobalt RED HELIX? drill bits are engineered for extreme durability and long life in hard metal applications. Designed with a Variable Helix that includes an aggressive 35 deg helix angle, which ends at 15 deg, the cobalt bits with RED HELIX? provide Rapid Chip Removal limiting heat build-up to Stay Sharper Longer. The 135 deg split point tip delivers a precision start and prevents walking for fast, accurate holes. Ideal for tough applications and provide up to 10X life vs black oxide drill bits but can be used in all twist drilling applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4 in hex shank.
|
High speed steel with black oxide coating for longer life; split point tip prevents walking when drilling in wood, metal, plastic and features the Rapid Load Quick Change system; 1/4 in hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With a carbide split-point tip and aggressive flute angles, DeWALT?? multiple-material drill bits deliver the power to easily drill through a range of materials without the need to change bits. A no-spin shank helps to increase efficiency by eliminating bit slippage.
|
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Avanti Pro Drill Bit, Percussion, 1/4 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 6 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills
|
Avanti Pro Drill Bit, Percussion, 3/8 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 6 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills
|
Diablo's SPEEDemon ??? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong??? for increased shank stability and durability in cordless and corded impact and drill drivers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch BlueGranite Turbo??? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills and impact drivers. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.
|
|
Heat treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
