Home > POWER TOOLS & ACC > POWER NAIL GUNS & STAPLERS > BRAD & FINISH GUNS - CORDLESS
Choose a sub category:
BRAD NAIL GUNS - STRAIGHT FINISH NAIL GUNS - STRAIGHT FINISH NAIL GUNS - ANGLE
Sort By:
1
NAILER BRAD 18GA 20V LITHIUM  NAILER BRAD 20V               NAILER BRAD CMPCT 18V 2INX18GA
The 20 V Max 18 ga brad nailer kit is battery-powered, eliminating the need for a compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool-free settings to provide increased productivity and user safety. WORX Brad Nailer Gun Kit, Tool Only/Battery Included: Battery Included, Battery Voltage: 20 V, Battery Capacity: 2 Ah, Magazine Capacity: 18 ga, Nail Gauge: 18 ga The Pro preferred brand of pneumatic nailers introduces the 18 V brushless compact cordless 18 ga brad nailer (model NT1850DFT) that is 30% more compact and 31% lighter than the previous model. Now, with a 2 Ah battery with fuel gauge, it delivers a driving speed of up to 2 nails per second, saving valuable time and increasing productivity. Forget the hassle of having to drag long hoses or compressors around, or having to deal with gas cartridges and go cordless. This 18 ga brad nailer delivers a similar feel to a pneumatic nailer thanks to Metabo HPT's unique air spring drive system. Combine the pneumatic like feel with the convenience and power of the 18 V or multi-volt battery and this cordless brad nailer works all day long, driving 5/8 to 2 in nails. Get 1300 nails per charge with the included 2 Ah compact battery. Backed by Metabo HPT's lifetime lithium-ion tool body warranty, it's a safe bet for the long haul. The 18 V 18 ga cordless brad nailer is a part of the expanding multi-volt system of 18 V and 36 V power tools from Metabo HPT. Go lighter with 18 V batteries or go longer with the unique multi-volt battery that works on both 18 V and 36 V tools to double your runtime for up to 8 Ah of run time per charge for more power on the go.
KIT PIN NAILER CORDLSS 20V 23G NAILER BRAD BARE 20V 18GA     NAILER BRAD CORDLESS 18V 18GA
The DeWALT? DCN680 18 ga brad nailer drives 18 ga brad nails from 5/8 to 2-1/8 in which makes it ideal for fastening decorative molding, casing, kitchen crown and shoe molding. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V. M18 FUEL? 18 ga Brad Nailer delivers peak productivity at your jobsite, providing you with unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the Brad nailer allows you to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of our POWERSTATE? Brushless Motor and REDLINK PLUS? Intelligence delivers you with unmatched fire rate with zero ramp-up time keeping you efficient throughout your day.
NAILER FINISH 18V 2-1/2INX16GA NAILER FINISH 18V 2-1/2INX15GA NAILER BRAD CRDLSS LI-ION 18GA
The Pro preferred brand of pneumatic nailers introduces the 18 V multi-volt brushless cordless 16 ga straight finish nailer - NT1865DMST that is taking cordless nailing to the next level. It now comes with a 18 V 2 Ah battery with fuel gauge for convenience. No longer will you have to worry about hoses, compressors or gas cartridges. Metabo HPT is proud to build upon their strong pneumatic heritage and offer a professional cordless option. Equipped with brushless motor technology, this nailer delivers increased power with less weight, a longer tool life and longer runtime per charge. This finish nailer features an impressive zero ramp up time and can drive approximately 950 nails per charge while being fast, accurate and flush. Metabo HPT's cordless finish nailer is a sure thing to get finish work done more efficiently, completely and comfortably. The 18 V 16 ga cordless straight finish nailer is a part of the expanding multi-volt system of 18 V and 36 V power tools from Metabo HPT. Go lighter with 18 V batteries or go longer with the unique multi-volt battery that works on both 18 V and 36 V tools to double your runtime for up to 8 Ah of run time per charge for more power on the go. The Pro preferred brand of pneumatic nailers introduces the 18 V brushless cordless 15 ga angled finish nailer - NT1865DMAST that is taking cordless nailing to the next level. It now comes with a 18 V 2 Ah battery with fuel gauge for convenience. No longer will you have to worry about hoses, compressors or gas cartridges. Metabo HPT is proud to build upon their strong pneumatic heritage and offer a professional cordless option. Equipped with brushless motor technology, this angled finish nailer delivers increased power with less weight, a longer tool life and longer runtime per charge. This cordless angled finish nailer features an impressive zero ramp up time and can drive approximately 800 nails per charge while being fast, accurate and flush. Metabo HPT's cordless finish nailer is a sure thing to get finish work done more efficiently, completely and comfortably. The 18 V 15 ga cordless angled finish nailer is a part of the expanding multi-volt system of 18 V and 36 V power tools from Metabo HPT. Go lighter with 18 V batteries or go longer with the unique multi-volt battery that works on both 18 V and 36 V tools to double your runtime for up to 8 Ah of run time per charge for more power on the go. Paslode's 18 Ga Cordless Brad Nailer is designed for accurate nail placement and detailed trim work. Weighing only 4.6 lb, our 18 Ga Cordless Lithium-ion is the lightest Cordless Brad Nailer in the market that will help to reduce jobsite fatigue and provide better control. The compact design offers superior maneuverability for precise nail placement in tight spaces and a variety of work conditions, such as overhead, while kneeling and on ladders.
NAILER ANGL FNSH M18 FUEL 16GA FINISH NAILER 20V 16GA CORDLSS NAILER FINISH GEN2 M18 15GAUGE
Our M18 FUEL? 16 ga angled finish nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the 16 ga angled finish nailer allows you to consistently sink nails to your required depth in hard and soft woods while leaving clean nail holes, making for repeatable results and easy filling. The nitrogen air spring mechanism, combined with our POWERSTATE? brushless motor and REDLINK PLUS? Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, keeping you productive and efficient throughout your job. This cordless finish nailer features a compact and ergonomic design providing access into tight spaces where nailing is required while limiting fatigue when using the tool. When paired with an M18? REDLITHIUM? CP2.0 battery pack, this battery-powered nailer fires up to 800 nails per charge and is fully compatible with all M18? REDLITHIUM batteries. The MILWAUKEE? M18 FUEL? 16 ga angled finish nailer delivers the pneumatic performance that professional carpenters and remodelers demand, with the freedom and convenience of cordless. The DeWALT? DCN660 16 ga angled finish nailer drives 16 ga angled finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening crown molding, casing and baseboards. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V.
NAILER BRAD LI-ION 1-STRP 18GA NAILER BRAD KIT 20V 18GA      NAILER ANGL FNSH 20V 15GA BARE
The new Paslode 18 ga cordless lithium-ion brad nailer is the ideal nailer for all of your trim projects. This tools has superior access to tight spaces so you are able to fasten in areas that aren't easily accessible. This consistent nailer makes your job easier than ever, driving each nail flush into all types of trim. Finally, weighing 4.25 lb, this is the lightest cordless brad nailer on the market. The DeWALT? DCN680 18 ga brad nailer drives 18 ga brad nails from 5/8 to 2-1/8 in which makes it ideal for fastening decorative molding, casing, kitchen crown and shoe molding. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V. The DeWALT? DCN650 15 ga angled finish nailer drives 15 ga angled finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening crown molding, casing, baseboards and hardwood floor installation. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V.
NAILER FNSH STRAIGHT 16GA 20V NAILER BRAD CORDLESS 18V 2IN  NAILER FNSH STRGHT LI-ION 16GA
The DeWALT DCN662 20 V Max XR 16 ga cordless straight finish nailer drives 16 ga straight finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening baseboards, door/window casing and crown moulding. With its brushless motor powered by a DeWALT 20 V max Lithium-Ion battery the DCN662 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. The Makita? 18V LXT? lithium-ion cordless 2 in brad nailer 18 ga (model XNB01Z tool only) is an ideal solution for installing narrow trim and molding. The XNB01Z is compact and powerful and drives a range of 18 ga brad nails from 5/8 to 2 in with a magazine capacity of up to 100 nails. Using the 18V LXT? 5 Ah battery the XNB01Z will drive up to 1660 nails on a single charge (attaching plywood to douglas fir with 5/8 in to 2 in nail). It's part of Makita? expanding 18 V lithium-ion series the world's largest cordless tool line-up powered by an 18 V lithium-ion slide style battery. Makita? 18 V lithium-ion batteries have the fastest charge times in their categories so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life Makita? created Star Protection Computer Controls?. Star Protection is communication technology that allows the Star Protection equipped tool and battery to exchange data in real time and monitor conditions during use to protect against over loading over discharging and over heating. For increased versatility the tool can also be powered by Makita? 18V LXT? and compact lithium-ion batteries with the star symbol on the battery indicating Star Protection inside. When you need precision in tight spaces, reach for the lightweight Paslode cordless finishing nailing system. It gives great maneuverability to place the nail exactly where you want it wherever you're working, overhead, on ladders or on your knees. Our portable finish nailer, finish nails and fuel cells are designed to work in tandem so you get the job done right, right away.
NAILER FINSH ANGLD LI-ION 16GA KIT NAILER BRAD CORDLESS 18GA KIT NAILER FINSH GEN2 M18 15GA
Paslode Angled Finish Nailer, Tool Only/Battery Included: Battery Included, Battery Voltage: 7.4 V, Battery Capacity: 1.5 Ah, Magazine Capacity: 100, Collation Angle: 20 deg, Collation Type: Angled, Nail Gauge: 16 ga, Fastener Size: 1-1/4 to 2-1/2 in L, Includes: 16 ga Angled Li-ion Cordless Finish Nailer, Model IM250A-Li, Rechargeable 7.4 V Li-Ion Battery, Li-Ion Battery Charger, Rugged Carrying Case, Safety Glasses, 5/32 in Hex Wrench, Magazine Type: Strip, Soft-Grip Handle, Battery Type: Lithium-Ion Our M18 FUEL? 18 ga brad nailer kit delivers peak productivity at your jobsite, providing you with unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the brad nailer allows you to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of our POWERSTATE? brushless motor and REDLINK PLUS? intelligence delivers you with unmatched fire rate with zero ramp-up time keeping you efficient throughout your day. Additionally, the cordless brad nailer operates using our REDLITHIUM? batteries and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors' nailers. The 18 ga nailer is compact in size and very lightweight, providing you with unmatched access into tight spaces and limiting your fatigue throughout your day. The M18 FUEL? 18 ga brad nailer delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of cordless. In addition to the brad nailer, this kit includes one M18? REDLITHIUM? CP2.0 battery pack, an M18? & M12? multi-voltage charger, a reversible belt hook and a contractor bag.
Senco 6E0001N Cordless Fusion Nailer NAILER FINISH ANGLED 16GA 20V NAILER ANGLED FINISH 20V 15GA
NAILER BRAD 18GA 2-1/8IN
Our Price: $439.99
Experience award winning cordless convenience in an all-day, everyday cordless pneumatic trim tool. Features instant shot performance with no ramp up time. No hose or air compressor to drag around. Never buy fuel cells again. Thumbwheel depth-of-drive adjustment. Specs: selectable actuation trigger firing mode, one Li-ion 18v, 80-percent in 15 minutes, 100-percent in 45 minutes, 110 fastener capacity, 13" H x 11" L x 3" W, 5/8 - 2-1/8" fastener range, galvanized finish, straight glued strip collation and weighs 6 lbs. Includes: (1) 18 volt Li-Ion battery, (1) charger and (1) storage bag. The DeWALT? DCN660 16 ga angled finish nailer drives 16 ga angled finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening crown molding, casing and baseboards. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V. The DeWALT? DCN650 15 ga angled finish nailer drives 15 ga angled finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening crown molding, casing, baseboards and hardwood floor installation. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V.
KIT FNSH NAILER STRT 16GA 20V
The DeWALT DCN662 20 V MAX XR 16 ga cordless straight finish nailer drives 16 ga straight finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening baseboards, door/window casing and crown molding. With its brushless motor powered by a DeWALT 20 V MAX Lithium-Ion battery, the DCN662 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless.
   
 
1