Home > ELECTRICAL > SPECIALTY ELECTRICAL > TOOLS & TESTERS
Choose a sub category:
FISH TAPES CONDUIT BENDERS WIRE STRIPPERS & CRIMPING TOOL
CIRCUIT/VOLTAGE TESTERS FUSE PULLERS LIGHT BULB CHANGERS
ALLIGATOR CLIPS GREENLEE SPECIALTY TOOLS/ACCES MISC TOOLS & ACCESSORIES
Sort By:
1
GB-Gardner Bender 14-075 Alligator Clips GB-Gardner Bender 14-078 Alligator Clips GB-Gardner Bender 14-077 Alligator Clips
For home, auto and marine applications. For home, auto and marine applications. For home and auto applications.
GB-Gardner Bender 14-076 Alligator Clips Gardner Bender GET-3100 Voltage Tester Gardner Bender 14-630 Battery Clamp
For home, auto and marine applications. Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets. These Gardner Bender 30 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle.
Gardner Bender RTL-108 Replacement Medium Test Lead GB CR-1000 Cable Ripper Gardner Bender GET-3202 Low Voltage Voltage Tester
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS plastic. Flexible cords for easy use. Slits outer covering of all sizes, both old and new, non-metallic (type NM) sheathed cable. This low voltage tester tests for AC/DC Voltage from 5 to 50 VAC/VDC, 50 to 60 Hz. The indicator glows when voltage is present and brightens as voltage increases. Applications include testing low volt outdoor lighting, low volt control panels, doorbells, alarm systems and automotive 12 VDC and 36 VDC.
Cooper BP914 Circuit Tester Milwaukee Clipper GS-40 Adjustable Wire Cutter/Stripper GB-Gardner Bender CT6101 Continuity Testers
For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors. This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes. The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use.
Toolbasix JL-SST-401183L Cable Crimper Gardner Bender GTPS-3100 Cable Stripper Gardner Bender GET-3213 3-Range Voltage Tester
The ProSource cable crimper with cushion grip handle can cut and strip wires, crimps ignition terminals. This clamper has easy-to-read wire size markings. Strips UTP and STP cable up to 0.24 in (6.2 mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded. Heavy-duty 3-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.
Wire-Aide 79-006N Non-Toxic Wire Pulling Lubricant GB-Gardner Bender LNW-KIT Locknut Wrenches Gardner Bender GBT-3502 Battery Tester
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed. The locknut wrench has been designed to end frustration. This ideal tool for locknut operation fits the majority of UL locknuts and features a thin profile that makes those normally tight spaces a thing of the past. It can be used to loosen or tighten a locknut by rotating the wrench in the direction of the arrows marked on both ends. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
Gardner Bender GCT-3304 Low Voltage Twin Probe  Continuity Tester Gardner Bender GRT-3500 Outlet Tester Smart 3002 Bulb Changer Kit
Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. This handy standard receptacle tester features a compact, comfortable, contoured design with neon indicators that display positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 to 125 VAC circuits) and a succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Lamps reveal 5 common wiring errors including open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, as well as correct wiring. Easy to read status chart displayed on both top and bottom of the tester for multiple position viewing. Designed for use on standard outlets and extension cords. Mr. LongArm bulb changers are the smart way to change light bulbs. The spotlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground.
Gardner Bender GFI-3501 Manual Outlet Tester Smart 3001 Bulb Changer Kit Gardner Bender GS-366 Cable Crimper/Stripper
Tests ground fault receptacles by overloading circuit and tripping GFCI. Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Mr. LongArm bulb changers are the smart way to change light bulbs. The floodlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground. This multi-purpose tool can be used to cut, strip, crimp, cut and rethread bolts. Features an ergonomic cushioned handle design, hardened steel cutting blades that provide strength and durability and a wire strip length gauge.
Gardner Bender GCV-3206 Low Voltage Twin Probe Continuity Tester LEADS COMFORT HD CAT 3-1000   Greenlee DTAP10-32 Right Hand Drill/Tap/Countersink Bit
LEADS TEST HD CAT3 1000V
Our Price: $12.99
Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits. Replacement leads for meters. Tough ABS construction. Flexible cords for easy use. Double insulated with removable caps for safety. Slip resistant and comfortable handling. Universal fit with most meters. CAT3 1000V, 40" length. Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
Greenlee DTAP12-24 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP10-24 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP1/4-20 Right Hand Drill/Tap/Countersink Bit
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
Greenlee DTAP6-32 Right Hand Drill/Tap/Countersink Bit Greenlee DTAP8-32 Right Hand Drill/Tap/Countersink Bit Gardner Bender GS-360 Wire Stripper with Lock
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling. Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling. These pliers that can be used to strips solid or stranded wire feature a locking mechanism and spring return.
Gardner Bender GS-45 Adjustable Wire Cutter/Stripper Gardner Bender GS-388 Light Duty Crimping Plier ProSource CP-C8153L Multi Function Wire Stripper
Strips solid or stranded wire. Compact, adjusts to eight wire sizes. Hardened spring steel. Looping hole bends, loops wire for termination on screws. Also includes spring return for easy handling. Hand tools are a part of every toolbox. With exclusive features for safety, durability, reliability and life strength, Gardner? Bender hand tools offer excellent performance on every job. Whether you need cutters, crimpers, strippers and pliers. Gardner? Bender has the ideal tool to complete your electrical tool set. These pliers are a excellent multi-use tool with a built-in crimper for making wire connections. They easily cut solid/stranded copper core and aluminum core wire. The built-in crimper is designed to crimp non-insulated, vinyl and nylon insulated, as well as ignition terminals. With a wide array of outstanding features, this is an essential pliers for every toolbox. Forward thinking design concepts ensure product usefulness for generations to come. The ProSource wire stripper is made of rust-resistant steel with a cushioned vinyl grip. The stripper has easy-to-read wire size markings.
Gardner Bender GKC-100A  Pvc Cutter Klein 74007 Adjustable Wire Stripper Gardner Bender GVD-3504 Non Contact Voltage Tester
Design makes fast, clean cuts. Cuts flexible, water-tight flexible and PVC conduit 1/2 in to 1 in. Reversible cutting blade, lightweight nylon handles, compact 8 in tool fits neatly in pocket or tool pouch. Adjusts from 12 to 24 AWG (2.5 to 0.25 sq-mm ). Gets into tight areas. Wire gauge dial sets stripping dies to proper size, helps prevent nicked wire. Spring-loaded design opens automatically after each action. Yellow handle, 5-1/2 in L. A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3504 Circuit Alert non-contact voltage tester features both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of AC voltage from 50 to 600 V. Use to locate breaks in wires and voltage at outlets, circuit breaker panels, light fixtures, switches and motors. Quickly locates the hot terminals in receptacles. Fully insulated probe tip eliminates the risk of contacting live electrical wires. Built-in patented safe test feature ensures tester and batteries are working properly. The unit includes a pocket-clip for secure portability.
Greenlee 84012 Conical Anchor Kit Greenlee 60A-3/4 Stubby Quick Change Auger Bit SNAKE MINI CABLE 15FT
Contains 100 anchors, 100 screws and a 1/4 in masonry drill bit. For use in concrete, block, tile and brick. Moisture and chemical resistant, for indoor or outdoor use. Shorter for better access to tight spaces between studs and joists, will drill 2 ft and 4 ft joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5 in (144 mm) weight 0.3 lb. (118 g). 1/4 in hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails. Gardner Bender's innovative mini cable snake is an ultra-compact 15 ft fishtape for installing a variety of wire and cable including electrical wire, speaker wire and network cable over short runs inside walls and ceilings.
Calterm 66212 Streamline Wire Stripper Vise Grip 2078309 Multi-Tool Cable Stripper/Crimper/Cutter Gardner Bender GS-355 Wire Stripper
Stripper has an insulated plier nose for pulling and looping wire. The cushion-grip handle features a spring return. Multi-tool strips and cuts wire from 10 to 22 AWG. Pliers style nose allows pulling and looping wire. Bolt cutter leaves ideal lead thread. Induction hardened cutting edge. Wire crimper for insulated and non-insulated terminals. Meets or exceeds all ANSI standards. The Gardner? Bender GS-355 wire stripper/cutter will cut and strip stranded core wire from 20 to 10 ga or solid core wire from 10 to 18 ga This tool has precision ground cutting edges and a pliers nose for pulling and looping finished wire.
Gardner Bender ET6204 4-Range High Visibility Voltage Tester Klein Tools 11045 Wire Cutter/Stripper Gardner Bender GS-361 Wire Stripper
Convenient pocket size probe allows checking of voltage potential with attached test leads or probes and patented snap-in probe storage is preset to standard wall outlet spacing. Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire. The Gardner? Bender GS-361 wire stripper/cutter will cut and strip stranded core wire from 30-16. This tool has precision ground cutting edges and a pliers' nose for pulling and looping finished wire. The laser-etched markings ensure the markings won't rub off after continued use.
Gardner Bender TT-10B Electrician 3-In-1 Tapping and Rethreading Tool Channellock 958 Wire Cutter/Stripper TOOL CRIMPING COAX
Hand tools are a part of every tool box and with exclusive features for safety, durability, reliability and life strength, Gardner Bender hand tools set an industry standard and provide you with the great performance you've come to expect for every job. Whether you need wire cutters, terminal crimpers, cable strippers or pliers Gardner Bender has the ideal tool to complete your electrical tool set. Our tools are ideal and essential for any wiring project whether it be an automotive application, marine application or for construction. Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker- CHANNELLOCK?. Zenith Coax Crimping Tool, Wire Type: Coaxial Cable, Wire Size: RG6, RG59, Handle Color: Black
Gardner Bender GS-370 Multi Tool Wire Stripper Gardner Bender KF-200 2-In-1 Electricians Knife WRENCH KIT LOCKNUT 3PC
Curved cutting blade, strips and cuts copper and aluminum wire, solid or stranded, 10 to 22 AWG. Precision ground-stripping stations prevent nicking conductor while stripping. Cuts and rethreads bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32. Pliers nose for pulling and looping wire. Crimps insulated and non-insulated terminals. Crimps coaxial F connectors. Tempered carbon steel blade and screwdriver. GB Wrench Set, Locknut, Steel, Number of Pieces: 3, Includes: 1/2 in , 3/4 in and 1 in Wrenches
Klein Tools 11046 Wire Cutter/Stripper Gardner Bender GS-389 Cable Cutter/Crimper Greenlee 60A-1 Stubby Quick Change Auger Bit
Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire. For high-leverage. Cuts up to 3/8 in Dia cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips. Shorter for better access to tight spaces between studs and joists, will drill 2 ft and 4 ft joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5 in (144 mm) weight 0.3 lb. (118 g). 1/4 in hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails.
GB SK-832WP Electrician's Screw Kit STRIPPER WIRE AUTO ADJUSTABLE Amertac VM1001RG6ST Cable Stripper
GB Electrician's Screw Kit, Thread Size: #8-32, Head Type: Round, Drive Type: Slotted, Package Quantity: 6.56 lb, Silver, Includes: (40) 1/2 in, (20) 3/4 in, (20) 1 in, (20) 1-1/4 in, (20) 1-1/2 in, (15) 2 in Wallplates Screws Take the guesswork out of stripping wire and make it quicker and more precise than ever. Use the Gardner Bender five-in-one multi-purpose tool to cut and strip copper and aluminum wire (solid or stranded) or to crimp insulated terminals, non-insulated terminals and ignition terminals. The adjustable tensioning wheel allows for precise stripping of smaller gauge wire. Use the adjustable strip length gauge to strip the correct length of wire every time. This multi-tool automatic wire stripper is great for almost any job and especially for applications where multiple different wire types and sizes are present. It's reliable and durable. The great addition to any tool box. "Strips insulation from coax cable. 3.87"" height x 1.25"" width x .75"" depth."
Gardner Bender GMT-312 12-Range Analog Multimeter Gardner Bender SCE-3262 Insulated Screwdriver Set GB SK-832T Electrician's Screw Kit
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries. Ergonomic high leverage grips for maximum torque, molded and insulated shaft rated to 1000 V for protection when working with electricity. Hardened chrome vanadium steel, with magnetic tips. Two-piece set includes SCE-3252 #2 Phillips tip and SCE-3256 3/16 in slotted tip. Carded packing. GB Electrician's Screw Kit, Thread Size: #8-32, Head Type: Round, Drive Type: Phillips, Package Quantity: 5 lb, Silver, Includes: (20) 2/3 in, (20) 7/8 in, (20) 1 in, (20) 1-1/4 in, (20) 1-5/8 in, (20) 2 in Phillips Head Screws
Klein-Kurve 11055 Wire Cutter/Stripper WIRE-PLIER ELECTRICIAN        King Safety 46515 Wire Stripper with Handle Lock
This wire stripper/cutter features six stripping holes and a shear-cutting knife to handle 8 to 18 AWG solid and 10 to 20 AWG stranded wire, plus shearing holes for 6 to 32 and 8 to 32 bolts. Longer hand grip coverage provides a more comfortable grip while the updated lock tucks nicely out of the way. The narrow head design allows this tool to easily get into tight places. Milwaukee? 6 in 1 combination pliers feature a revolutionary, forged dual head design for wire stripping and needle nose functionality. A unique reaming design is integrated into the pliers head for smoothing out rough edges of metal pipe and a curved blade design allows for clean cuts through larger wire sizes. These pliers have the capability to cut #6 and #8 bolts and feature a swing-lock design for fast one-handed operation and won't open when stored in a pouch or backpack. Milwaukee? 6-in-1 combination pliers deliver maximum productivity for the trades. The Milwaukee? 48-22-3079 is ideal for the toughest of jobsites. Milwaukee? stands behind their product and offers a limited lifetime warranty with all combination pliers. Plier nose for pulling and looping wire. Scissor-type cutting blade. Ergonomic-shaped handles. Cuts and strips both solid and stranded wire. Spring automatically spreads handles. Slide lock. Wire sizes embossed in metal. Dimensions 6 in/152 mm, minimum/maximum strip AWG 20 to 10, 0.8 to 2.6 mm.
MULTIMETER USB DIGTAL ELECTRIC DETECTOR VOLT ADJUSTABLE      Bussmann Fuses BP/FP-2 Fuse Pullers
Gardner Bender's GUSB-3450 USB multimeter is used to confirm USB port voltage and current and check chargers, cables and USB ports. The tester features a high-impact housing and a pocket clip. Measure current draw, measure performance of solar USB chargers and test for proper wiring and polarity. The easy to understand display alternates between volts and amps. Features a 1 year warranty. A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. Engineered to specifications required by professional electricians the Sperry Instruments VD6509 adjustable non-contact voltage detector allows for sensitivity adjustments in multiple-wire applications when precision and safety are crucial. This unit features an adjustable sensitivity dial able to detect the presence of AC Voltage from as low as 12 V to up to 1000 V AC and provides both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of voltage. It also includes a built-in flashlight. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. This unit features 250 lb crush rated impact-resistant ABS housing to withstand tough worksite applications while the design ensures a positive user experience over long hours of repeated use. Applications include testing doorbells, low voltage lighting, security system wires, AC energized wires, quickly locating hot terminals in receptacles, pinpointing breaks in wires and detecting the absence/presence of voltage at outlets, circuit breaker panels, light fixtures, switches and motors. The unit includes a pocket-clip for secure portability. Tester is cETLus Listed, CE Certified, CAT III 1000V/IV 600 V rated and includes a limited lifetime warranty. Operates from a single AAA battery (included). Frequency 50 to 60 Hz. Bussmann cartridge fuse pullers are heavy-duty tools for safely removing fuses from their blocks.
GB-Gardner Bender SK-632T Electrician Screw Kits Channellock 908 Wire Stripper Sperry Live-Wire Adjustable Handheld Voltage Tester
Contains assorted sizes and lengths of commonly used electrical screws. Screws are #6 to 32, ranging from 3/4 to 3in L. Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker - CHANNELLOCK?. A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3505 LiveWire adjustable non-contact voltage detector features an On/Off adjustable sensitivity dial able to detect the presence of AC voltage from as low as 12 V to up to 600 VAC and provides both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of voltage. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. Applications include testing doorbells, low voltage lighting, security system wires, AC energized wires, outlets, switches, electrical panels and light fixtures. Quickly locates the hot terminals in receptacles. The unit includes a pocket-clip for secure portability. Tester is C/ETL/UL Listed, offers a 150 lb crush rating, Cat III 600 V rating and includes a 1 year warranty.
Gardner Bender GDT-311 3-Function Digital Multimeter Klein Tools 2100-7 Electrician Scissor BOOK REFERENCE ELECTRICAL
When you're ready to add a multimeter to your toolbox this unit is a great place to start. This tester is designed to work on most household appliances and is equipped with an easy to read 3-1/2 in digital display and three testing functions - AC voltage to 500 V, DC voltage to 600 V and resistance to 2 mOhm. The 11 position manual ranging smooth rotary style achieves precise readings and the low battery indicator ensures an accurate read-out. Durable housing is drop-resistant to 3 ft and crush-rated to 150 lb. Tester is rated Cat III 600 V. Unit comes pre-packaged with secure-fitting 26 in test leads and operating instructions. For telecom and electrical applications. Strong, tough tempered steel with nickel-plated finish. Upper blade has notches for stripping 19 AWG and 23 AWG wire. Scraper and file on outside of both blades. Serrated lower blade reduces slippage. 5-1/4 in length, 0.20 lb. Gardner Bender Ugly's Electrical References Revised 2017 Edition is a helpful guide for the professional electrician and electrical minded weekend warrior. The book includes common mathematical formulas and specific rules and regulations from the National Electric Code. The easy to understand format makes it an ideal resource for double checking commonly used equations. Keep on hand as a quick reference for on the job applications.
Klein Tools 11048 Wire Cutter/Stripper Klein-Kurve 11057 Wire Cutter/Stripper Channellock 957 Wire Stripper
Strips two wires in a single motion. Paired stripping holes for 14 AWG and 12 AWG solid wire. One stripping hole for 10 AWG solid wire. Shear-type cutting blades for square, clean cuts. Narrow nose fits into tight places. Hardened steel with precision ground stripping holes. Spring-loaded action for self-opening. Precision-ground stripping holes for easy removal of insulation. Easy-to-read wire gauge markings on both sides for stripping in either direction. Black-oxide finish resists corrosion. Red indicates stranded wire, yellow indicates solid wire. Textured handles provide a firm, comfortable grip. Wire looping and bending holes. Strips and cuts 10 AWG, 12 AWG, 14 AWG solid. Precision shear-type blades for clean cuts on solid and stranded copper wire. Easy-to-read markings on both sides. Curved handles help reach into confined areas. Wire looping and bending holes. Coil spring provides fast self-opening action. Precision-ground stripping holes. Strong-gripping serrated nose for easy bending, shaping and pulling of wire. Screw-shearing holes. Handy closure lock for convenient storage. Double-dipped comfort grips. Blue and red handles. Strips and cuts 20 to 30 AWG solid and 22 to 32 AWG stranded. Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker- CHANNELLOCK?.
Greenlee 301A Key Hole Jab Saw Greenlee 1941-1 Cutter Blade Greenlee 125Q Small Pulling Grip with Swivel D Versigrip
Keyhole saw with integrated blade and ergonomic handle design provides maximum strength. Hardened steel blade with clog-free teeth, handle with non-slip grip. Pointed tip easily punches through drywall. Blade cuts on both on push and pull strokes. Hole in handle for lanyard or convenient storage. Tool is not insulated. Overall length of 11-5/8 in. Replacement blade for Greenlee 0952-01 or 1940 flexible metal conduit cutter. For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting.
BigBen BH-75 Conduit Bender Handle ProSource KY-665T3L Wire Stripper Klein Tools 1010 All-Purpose Long Nose Plier
GB Conduit Bender Handle, 3/4 in, Aluminum, 38 in L The ProSource wire stripper can strip 10 to 24 AWG copper or aluminum wire, solid or stranded, cuts wire (HRC 40-50), crimps 10 to 22 AWG insulated, 4 to 22 AWG non-insulated and 7 to 8 mm ignition terminals. The micro adjustable knob allows wire smaller than 24 AWG to be stripped. The wire stripper has easy-to-read wire size markings. Cuts and strips wire. Narrow, serrated pliers nose to pull, loop and bend wire. Long, curved cutting blade. Cutters and strippers are in front of the pivot for maximum ease of use in reaching into tight places. Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals, cleanly shears bolts. Use on bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32, 10-24, strips and cuts 10 to 22 AWG, connectors 10 to 22 ga Cushioned handles for comfort.
Klein-Kurve Romex GRX-3224 Dual Cable Stripper Strip-Easy SE SE-92 Adjustable Wire Stripper GB GMT-318 Analog Multimeter
This handy multi-purpose nm cable stripper/cutter is able to strip both 12/2 and 14/2 AWG nm cable and 12-14 AWG single conductor cables in one tool. Designed with user comfort and convenience in mind this tool offers a power spring handle return to reduce hand fatigue and a locking handle for compact storage. The curved cutting blade makes for easy stripping and cutting while the built in wire looping holes and pliers nose for gripping wire make almost any electrical job a snap. Tool also incorporates the ability to cut and rethread bolts size 6-32 and 8-32. You'll find yourself reaching for this non-metallic cable stripper/cutter again and again. The Strip-Easy automatic wire stripper is an ideal choice for stripping solid or stranded wire. The spring-loaded stripper automatically removes wire insulation on 22-8 ga wires without crushing the ends. It has a comfortable, no-slip plastic handle that helps to secure a firm hand grip during use. This multifunctional analog multimeter was designed for the homeowner, hobbyist or professional needing to make electrical and electronic equipment measurements. Capable of measuring 6 functions on 14 ranges on it is easy to read color-coded analog display you'll find yourself reaching for this handy unit almost every time. Unit tests AC and DC voltage of 10-50-250 and 500 V, DC current 250 mA, up to 50K of resistance, -20 to +56 dB decibels on AC voltage ranges and common household batteries from 1.5 V thru 9 V. Unit includes built-in 0 Ohm adjustment dial allowing you to reset prior to resistance testing and to perform internal battery test function. Unit incorporates fuse overload protection circuitry to protect the user and a mirror scale is provided to reduce the possibility of parallax errors. Ships with test leads and a tri-lingual instruction manual and includes a 1 year warranty. Common measurements with this unit include - testing household batteries for charge level, troubleshooting various low voltage circuits, testing wall receptacles for proper voltage and grounding and troubleshooting electrical cords, stings of lights, fuses and switches to determine if they are operating properly or if a break in the circuit exists and the item in question needs to be repaired or replaced. The decibel feature of this multimeter is used for transistor gain measurement in electronic circuits and should not be confused with audio decibels.
Gardner Bender EFT-50B Economy Fish Tape TESTER ELEC STOP SHOCK II     KIT ELEC TESTER HOUSEHOLD RED
Designed specifically for DIY occasional use, this 50 ft tape is made of standard steel material and makes quick work of most wiring projects, pulling wire through conduit or framing. The stop shock II circuit analyzer makes it easy to test gfci receptacles and determine the appropriate wiring correction needed. This GFCI tester uses advanced circuitry and a patent-pending proprietary design to precisely detect the required low resistance (less than 10 Ohms) on ground wire and provides a clear and easy-to understand single led readout indication for correct wiring or bad ground, open neutral, hot/gnd reverse, hot/neu reverse and open hot wiring errors without the need to memorize or decipher a dual-indication chart. The stop receptacles require GFCI test function to test outlets wired in parallel to GFCI circuits (bathroom, kitchen and outdoor receptacles require GFCI protection). Designed for the jobsite this tester features hi-impact abs housing with a 250 lb crush rating and the ability to withstand drops of up to 10 ft. This indispensable household tester kit includes the most commonly used testers to test voltage, GFCI receptacles, batteries and USB ports. The voltage tester allows the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The included GFCI receptacle tester detects common wiring problems in standard and GFCI protected outlets. Simply plug it in and view the light pattern on the tester to determine if it's correct, open ground, open neutral, open hot, hot/ground reverse or hot/neutral reverse. Tester works on 110 to 125 VAC receptacles only and will not indicate quality of ground. The battery tester tests common household battery types (AA, AAA, C, D and 9 V batteries) to determine existing charge. Finally, the USB tester can check USB ports for the presence of voltage and test for proper wiring and polarity. Simply plug it into a USB port and the indicator bulb will glow a certain color to tell you the condition of the USB port.
Greenlee 430-500 Spiral Wrap Tracer Poly Twine Dispenser GB BigBen Hand Bender Head Klein 1001 Electricians Tool
Poly line, 210 lb. average breaking strength, can be blown into conduit and then used to pull in a larger pulling rope or it can be used directly to pull in smaller wires. Can be used directly from the container with power fishing systems. Resists tangling when dispensing. Prepunched hole for dispensing the line. Rot and mildew-resistant. GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard markings to simplify the job. Made of rugged, heat-treated aluminum and backed by a lifetime warranty. Package includes bender head only. Also available with handle (Model #960H). Other head sizes available are 1 in (Model #962) and 3/4 in (Model #961). Bender handle available separately (Model #BH-75 - 3/4 in NPT x 38 in long). Includes a detailed hand bending manual which clearly illustrates various bends and how to achieve them including the mathematical formulas to complete more complicated bends. Two wire cutters. Crimps 7 to 8 mm insulated and non-insulated terminals, lugs and splices. Cuts and strips stranded wire, shears bolts. Pivot nut adjusts tension. Full-sized, plastic-covered cushioned handles. Cuts bolt of size 4 to 40, 6 to 32, 8 to 32, 10 to 24 and 10 to 32. Strips and cuts wire sizes 10 to 26 AWG stranded (4 to 0.14 mm) and 8 to 22 AWG solid (6 to 0.34 mm). Red handle of length 8-1/2 in and weight 0.47 lb.
Gardner Bender SE SE-398 Cable Cutter/Stripper Vise Grip 2078300 Self Adjusting Wire Stripper Channellock 909 Crimping Plier
This compact and easy-to-use coaxial cutter and stripper adjusts easily to various cable thickness. Designed with a reversible v-block for different cables; RG-6 = 6, RG-58 = 8, RG-59 = 9 and RG-174 = D. This tool will both cut and strip the cable. Simply choose the correct cable size, adjust the blade depth and then insert the cable until it reaches the guide and rotate 1 - 4 times. Pull the tool straight out to remove the insulation. Designed with quick 1 squeeze cutting and measuring only 6-1/4 in long for compact storage. Comfortable in the hand and easily stored you'll be happy to have this tool on hand for all your coax installation needs. Self-adjusting, strips wire from 10 to 24 AWG. Adjustable stopper controls the length of the core strip. Swivel knob micro-adjusts for gauges smaller than 20 AWG. Wire crimper crimps 10 to 22 AWG insulated, 10 to22 AWG non-insulated and 7 to 9 mm ignition terminals. A sleek-nose design gets into tight places and a laser heat-treated mating edge makes this the only crimper you'll ever need. Ideal for both insulated and non-insulated solderless connections and terminals.
Gardner Bender GTPS-3200 Cable Stripper ArmorEdge GESP-224 Cable Stripper ArmorEdge GESP-55 Wire Stripper
Compact design, strips UTP and STP CAT 3 and CAT 5, flat and round cable from 1/8 to 3/8 in Dia and silver satin and other flat cables. Tension release lever for positioning and release of cable. ArmorEDGE NM cable stripper by Gardner Bender is designed to strip #12 and #14 solid wire, 12/2 and 14/2 nm cable and cut and rethread bolt sizes 6-32, 8-32 and 10-32. Envisioned to provide the user with the ultimate comfort and control these strippers offer 7-1/4 in symmetric ergonomic cushioned handles with dual gripping positions for traditional or forward hand positions coupled with a coiled spring action return to reduce job-fatigue. Easy to read laser-etched markings make it a snap to choose the right groove for the application while the stainless steel body and double bevel cutting blades offer superior corrosion and nick resistance. Wire looping holes strategically integrated into the blades allow the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. With a limited lifetime warranty and a wide array of outstanding features this is an essential cable stripper for every toolbox. ArmorEDGE wire stripper by Gardner Bender is designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control these strippers offer 6-3/4 in symmetric ergonomic cushioned handles with dual gripping positions for traditional or forward hand positions coupled with a coiled spring action return to reduce job-fatigue. Easy to read laser-etched markings make it a snap to choose the right groove for the application while the stainless steel body and double bevel cutting blades offer superior corrosion and nick resistance. Wire looping holes strategically integrated into the blades allow the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. Strips #10-#18 AWG and cuts and rethreads bolt sizes 6-32, 8-32 and 10-32. With a limited lifetime warranty and a wide array of outstanding features this is an essential wire stripper for every toolbox.
Gardner Bender GMC-2000D Cable Crimper Gardner Bender GVT-392 Solenoid Activated Voltage Tester DETECTOR VOLT W/FLASHLIGHT
The Gardner? Bender modular plug crimp tool is used to produce patch cable and handset cables, cut, strip and crimp. Test AC/DC voltage from 120 - 480 volts, 50-60 Hz and DC polarity. Dual voltage indication: solenoid vibration and neon bulb. Neon bulb indicates DC polarity.  Probes lock together for one handed testing of standard outlets, separate for up to 4' reach. Tests outlets, panels, switches, circuit breakers and light fixtures. UL Listed. A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. Engineered to specifications required by professional electricians the Sperry Instruments VD6508 non-contact voltage detector features both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of AC voltage from 50 to 1000 V. It also includes a built-in flashlight. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. This unit features 250 lb crush-rated impact-resistant ABS housing to withstand tough applications while the design ensures a positive user experience over long hours of repeated use. Applications include quickly locating hot terminals in receptacles, pin pointing breaks in wires and detecting the absence/presence of voltage at outlets, circuit breaker panels, light fixtures, switches and motors. The unit includes a pocket-clip for secure portability. Tester is cETLus Listed, CE Certified, CAT III 1000V/IV 600V rated and includes a limited lifetime warranty. Operates from a single AAA battery (included). Frequency 50 to 60 Hz.
BULB-CHANGER                  Greenlee 150Q Medium Pulling Grip with Swivel D Versigrip TORCH BUTANE POCKET W/REFILL
Unger Professional Light Bulb Changer, Extension Length: 11 ft For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting. Heat shrink electrical tubing and terminals in splicing wire connections with the Gardner Bender pocket butane torch. This torch comes with a can of butane fuel for convenient refilling.
ArmorEdge GESP-70 Wire Crimper/Stripper Klein 1005 Non-Insulated/Insulated Crimping Tool Klein-Kurve Romex K1412 Dual NM Cable Cutter/Stripper
ArmorEDGE wire stripper by Gardner Bender is designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control these strippers offer ergonomic cushioned handles with dual gripping positions for traditional or forward hand positions ensuring this tool is comfortable to use all day long. Easy to read laser-etched markings make it a snap to choose the right groove for the application while the stainless steel body and double bevel cutting blades offer superior corrosion and nick resistance. Wire looping holes strategically integrated into the blades allow the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. Cut and strip #8-#20 AWG solid wire, #10-22 AWG stranded wire and crimp insulated and non-insulated terminals and coaxial "f" connectors. Cuts bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32. With a limited lifetime warranty and a wide array of outstanding features this is an essential wire stripper for every toolbox. Hardened wire cutter in nose. Tapered nose design for working in confined spaces. Accommodates wire from 10 to 22 AWG. Crimps 10 to 22 AWG. Crimping die marked for insulated and non-insulated solderless terminals and connectors. Plastic-dipped, cushioned handles. Red handle, 9-3/4 in L, 0.80 lb. With 12/2 and 14/2 stripping slots to quickly remove outer jacket of type NM-B non-metallic-sheathed cable. Stripping holes remove insulation on 12 AWG and 14 AWG lead wire. Narrow nose fits into tight places. Precision staggered shear-type blades for square, clean cuts on solid copper wire. Curved handles help reach into confined areas. Strong-gripping serrated nose, for easy bending, shaping and pulling of wire. Wire looping and bending holes. Screw-shearing holes. Coil spring provides fast self-opening action. Closure lock for storage. Double-dipped comfort grips. Yellow and white handle. Used for 12 AWG and 14 AWG solid wire.
Klein 626 6-in-1 Tapping Tool Circuit Alert GPT-80 Voltage Sensing Long Nose Plier Greenlee 438-5H Fish Tape
Klein Tools 6-in-1 tap tool quickly forms new threads and re-forms burred threads. It's also great for cleaning out plaster obstructions. Each tap size rethreads to the next larger size if threads are stripped. Circuit Alert pliers combine common electrician needs with the Gardner? Bender overmolded, comfort grip. Steel fish tape in self-tensioning impact-resistant rewinder case with dirt-free tape finish. 0.045 in thick, weighs 2.75 lb.
Nail Eater 66PT-3/4 Extreme Auger Bit 3/4 in Dia x 18 in OAL Gardner Bender COM-310 Compression Cable Crimper STRIPPER WIRE LONG NOSE STRGHT
Cutting edge is hardened for longer life. Self-feeding screw point draws bit through wood even after multiple sharpening's. Made of high quality carbon alloy steel, cuts through nails and provides up to 3X longer life. Overall length 18 in. Hex shank: 7/16 in (11.1mm). Weight: 1.5 lb, (681g). This F-type compression crimp tool creates a permanent, water-tight sealed connection on RG-6, RG-6 Quad and RG-59 connectors. ArmorEDGE long nose wire strippers by Gardner Bender are designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control, these strippers offer symmetric ergonomic, cushioned handles. Easy-to-read laser etched markings make it a snap to choose the right groove for the application, while the forged steel body and double bevel cutting blades offer superior corrosion and nick resistance. The long nose design allows the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. Cuts and rethreads bolt sizes 6-32 and 8-32. Strip 20 to 8 AWG solid and 10-22 stranded wire. Crimp insulated and non-insulated connectors. With a wide array of outstanding features, this is an essential wire stripper for every toolbox.
Circuit Alert GPT-90 Voltage Sensing Linemans Plier Circuit Alert GST-224M Voltage Sensing Wire Stripper STRIPPER WIRE LONG NOSE CURVED
Circuit Alert pliers combine common electrician needs with the Gardner Bender over-molded, comfort grip. This patented line of tools with snap-in sensor detects AC voltage without contacting live wires. ArmorEDGE long nose wire strippers by Gardner Bender are designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control, these strippers offer curved ergonomic, cushioned handles. Easy-to-read laser etched markings make it a snap to choose the right groove for the application, while the forged steel body and double bevel cutting blades offer superior corrosion and nick resistance. The long nose design allows the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. Cuts and rethreads bolt sizes 6-32 and 8-32. Strip 18 to 10 AWG solid and 12-20 stranded wire. Crimp insulated and non-insulated connectors. With a wide array of outstanding features, this is an essential wire stripper for every toolbox.
Apex 2162 Cable Crimper Gardner Bender ES-360 Electrician Scissor/Cutter GB Streamline FTS Deluxe Flat Shatterproof Fish Tape
Cushion-grip handles. Pliers nose has serrated jaw to pull, loop and twist wire. Crimper works on 7 mm and 8 mm non-insulated terminals and electrical 22-20 to 20-10 insulated terminals. Wire cutters and strippers at front of tool strip wire sizes 22-20 to 22-10. Bolt cutter cuts bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32 and 10-24. Gardner Bender electrician scissors are made from durable stainless steel with precision hollow ground and hardened for long lasting edge. It is made for right and left handed users. It is for shearing soft cable up to 22 mm Dia, insulation materials, electrical tape, stripping insulation and many other materials. Gardner Bender's streamline steel fish tape sets the industry standard for quality and dependability. GB uses a shatterproof reel that stands Up to on-the-job abuse and features four viewing points to allow the user to see how much tape remains in the reel. Tape is wound directly into housing with no need to snap retaining tapes and no sticky residue inside housing.
Circuit Alert GST-70M Voltage Sensing Wire Stripper GB-Gardner Bender CS550A Sperry Circuit Locators TESTER ELEC 2N1 GFCI/NON CONT
This patented line of tools with snap-in sensor detects AC voltage without contacting live wires. Sperry makes the job of locating electrical circuits (AC circuits of 110 to 125 V) quick and easy. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time using trial and error until you hit the right one. This circuit breaker finder features a sending unit which you plug into a receptacle in the room where you want to work and a receiving unit which you use to test the breakers to correctly identify the right breaker every time. The receiver features both a visual flashing light and an audible beeping to alert you when the correct breaker is identified. The package includes a user manual and a 9 V battery required for the receiver unit. Engineered to specifications required by professional electricians the innovative 2-in-1 dualcheck tester from sperry instruments saves you time and money, while providing quality you can trust. This patent-pending dual-ended tester incorporates 2 of the most popular testers used by electricians, inspectors, technicians and homeowners into a single unit. Engineered with an exclusive design and latest technology gfci outlet tester on one end and a 50 to 1000 VAC non-contact voltage tester on the other the dualcheck quickly provides an accurate analysis of any 120 V receptacle. The non-contact voltage tester detects 50 to 1000 VAC and features a bright 360 deg led visual indicator along with an audible beeping indicator of the presence of voltage. On the other end our best-in-class gfci outlet tester features a clear and easy-to understand single led readout indicating correct wiring or open ground, open neutral, hot/gnd reverse, hot/neu reverse and open hot wiring errors without the need to memorize or interpret a chart. Designed for the jobsite this tester features hi-impact abs housing with a 250 lb crush rating and the ability to withstand drops of up to 10 ft. Conceived with long workdays in mind this unit also offers overmolded grips to ensure user comfort during repeated or prolonged use.
Greenlee 168Q Large Pulling Grip with Swivel D Versigrip Nail Eater 66PT-7/8 Extreme Auger Bit 7/8 in Dia x 18 in OAL Greenlee Textron GT-16 Voltage Testers
For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting. Cutting edge is hardened for longer life. Self-feeding screw point draws bit through wood even after multiple sharpening's. Made of high quality carbon alloy steel, cuts through nails and provides up to 3X longer life. Overall length 18 in. Hex shank: 7/16 in (11.1mm). Weight: 1.5 lb, (681g). Pen size, fits into pocket or tool pouch. Detects power and voltage without touching the bare conductor. For use on power wiring plus lighting, thermostats and other low voltage circuits. Use to detect voltage in outlets, fixtures, wires and cables. Finds breaks in wires. Identifies hot and neutral conductors. Low battery indication. Voltage detection 5 to1000 VAC. Frequency 50 to 500 Hz. Measurement category CAT IV, 1000 V. Includes two 1.5 V AAA batteries.
Gardner Bender FTS-65R Upperhand Fish Tape BigBen 961 Hand Bender MULTI METER DIGITAL BLUETOOTH
GB's Series of UpperHand fish tapes has improved traditional hand fishing with the first ergonomic fish tape in the industry. Easy to grip, easy to retract and backed by an industry leading 5 years limited warranty. The improved housing design is manufactured with impact-resistant ABS and nylon resins that exceed the 25 ft drop test while the corrosion-resistant plated steel wire ensures the toughest, most durable tape for long-lasting use. GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard markings to simplify the job. Made of rugged, heat-treated aluminum and backed by a lifetime warranty. Package includes bender head only. Also available with handle (Model #961H). Other head sizes available are 1/2 in (Model #960) and 1 in (Model #962). Bender handle available separately (Model #BH-75 - 3/4 in NPT x 38 in long). Includes a detailed hand bending manual which clearly illustrates various bends and how to achieve them including the mathematical formulas to complete more complicated bends. The ToolSmart? digital multimeter reads voltage, current, resistance, temperature and more with turn of the dial. It also allows a smartphone to serve as a second viewing screen in case conditions are dark or there is more than one person on the job. All data goes directly from the meter to the free ToolSmart? smartphone app.
Greenlee DM-25 Digital Multimeter GB-Gardner Bender TT64202 Cable Testers Gardner Bender GBX-300 Flexible Cable Cutter
Use to measure voltage and check batteries, measure current of small electronic circuits. 600 VAC/VDC voltage. Resistance measurement. 1.5 V/9 V battery test. Continuity and diode tests. Built-in test leads and a rubber boot to protect meter from damage. 9 V battery included. Measurement category Cat III, 600 V. ETL approved. The Gardner Bender network cable tester for coax, Cat3 through Cat6 Ethernet tests for opens, shorts, miswires, reversals and shield continuity. The easy-to-read LEDs of this cable tester pinpoint the exact error of the cable being tested. The Gardner Bender GBX-300 cuts BX, MC, AC and liquid-tight 3/8 in conduit for greater versatility. Designed with a quick-clamp feature that automatically adjusts to the cable size and secures it for splitting and an automatic release of the cable. Comes equipped with an adjustable cutting depth to cut without nicking integral cable components. The pivot shaft is reinforced with a high-strength steel sleeve to increase stability. Thumbwheel design ensures that blade changes are quick and easy with no tool required. Constructed of durable plastic that has been drop tested at 25 ft for extreme toughness and long-term use.
Gardner Bender GMC-1145D Cable Crimper Fish Ease FTX-12L Fish Stick with Hook Attachment 4 ft Glo Fish FTX-15GL Fish Stick with Hook Attachment 5 ft
The Gardner? Bender modular plug telephone crimp tool is used to produce patch cable and handset cables, cut, strip and crimp. The heat-treated frame provides strength and durability. Used to install wires above drop ceilings, through insulated walls and under carpet and floors. Contains three connectable fiberglass rods. Bullet nose and hook attachment included. Fish sticks make it easier to install wire through walls, above ceilings or underneath carpet anywhere you might encounter obstacles that would cause a standard fish tape to fold under pressure. GloFish? sticks are made from luminescent fiberglass that glows in the dark, improving visibility and making it easier to see your intended path or any obstructions to maneuver as needed. Each 3 ft rod features an interlocking end allowing you to connect them together to achieve the length needed for the job. Package also includes two changeable end attachments a bullet nose to guide the stick smoothly on the way towards the end of the run and a hook attachment for pulling or pushing the wire through the run.
GB-Gardner Bender DM2A Sperry Pocket-Pro Digital Multimeters Quick Cutter 6923 Adjustable Recessed Lighting Hole Saw Gardner Bender GDT-3200 7-Function Digital Multimeter
Quickly and conveniently check outlets, fuses, wires, plugs, motors, electronic circuits and more with Sperry's new pocket digital multimeter. The Sperry pocket digital multimeter offers 7 testing functions including AC/DC voltage up to 600 V, resistance, frequency, continuity, duty cycle and diode testing over 21 ranges with auto-ranging capability. Designed for someone seeking a convenient and simple yet accurate and efficient multimeter. This compact unit features overload protection on all ranges and both a low battery indicator and an auto-power off function to improve battery efficiency. Fits a 3/8 in drill chuck and can be used with a cordless drill. Cuts perfect holes in drywall and ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Included dust shield virtually eliminates flying dust and debris. When you contemplate adding a multimeter to your toolbox this Gardner Bender auto-ranging unit makes the decision easy. Equipped with an easy to read 3-1/2 in backlit LCD digital display and magnetic holding strap making this tester ideal for automotive, appliance, circuit breaker and other hands-free applications. In addition the multimeter features rubber housing to promote a steadfast comfortable grip while wrap-around lead holders keep leads at the ready. Snap-in probes spaced to fit a standard outlet provide quick and easy testing with one hand. Engineered with seven testing functions - AC voltage to 500 V, DC voltage to 600 V, resistance to 20 mOhm, diode, continuity (includes audible indication), temperature probe (-40 to 1832 deg F) and battery testing for 1.5 V batteries. The seven-position auto-ranging smooth rotary style achieves precise readings and the low battery indicator with auto-off function ensures an accurate read-out. Durable housing with a rubber boot is drop-resistant to 6 ft and crush-rated to 150 lb. Tight and secure input jacks keep the included 26 in test leads fixed firmly in place during testing. Unit comes pre-packaged with leads, a magnetic attachment strap for hands-free operation and user manual. Tester is rated Cat III 600 V.
Reliance Controls THP103 Amwatt Appliance Load Testers Greenlee 540-12 Wire Pull Fish Stick 4 ft Greenlee Textron TK-30A Electrical Tester Kits
One-of-a-kind meter gives instant, accurate readout of amps or watts used by common cord-connected household appliances and lights. Bullet nose and in hook threaded tips, packaged in clear plastic tube. 12 ft (3 to 4 ft sections) kit. Highly visible 1/4 in Dia green fiberglass rods. 200 lb minimum pulling strength. Sections can be threaded together and are easy to see when working above ceilings, down walls or under raised floors. Comes in a tube. Three core products - the DM-25 manual ranging multimeter to measure voltage and check batteries, the GT-10 polarity cube to trouble shoot 120 VAC grounded outlets and the GT-11 non-contact voltage detector for use in outlets, lighting fixtures, circuit breakers, wires and cables. Comes with a durable carrying case for storage and added protection.
D'Versibit 06-03-54B Type B Auger Bit 3/8 in Dia x 54 in OAL Glo Stix 540-15 Light Fish Stick Gardner Bender TK-5HCN Household Tester Kit
For aggressive chip removal in many types of woods. Screw point for easy starting and pulling through wood. Hole in bit for attaching pulling grip. With screw point removed, this bit can be ground to function like a standard combination bit. Luminescent fiberglass rods for better visibility when fishing above dark ceilings, up walls or below raised floors. Three 5 ft sections, 3/16 in Dia, flexible for fishing in walls through an outlet box. 200 lb minimum pulling strength. Steel-threaded connectors, interchangeable with Greenlee 1/4 in Fish Stix. Clear, non-metallic storage tube, keeps rods charged and ready to use. Kit includes three 5 ft sections for a total of 15 ft, a bullet nose and a hook nose tip in a storage tube. Designed with the DIY homeowner in mind! This kit includes all of our most popular electrical testers in a handy storage/carry case. Troubleshoot any household electrical problem with this complete kit of testers. It features easy to read indicators and displays an accurately indicate status of circuit under test. It is constructed of high-impact ABS. The kit includes a full function digital multimeter, receptacle tester, non-contact voltage detector and telephone line tester.
Greenlee Textron DTAPKIT Electrician'S Drilling/Tapping Tools D'Versibit 09-03-54B Type B Auger Bit 9/16 in Dia x 54 in OAL Sperry Wire Tracker ET64220 Lan Tracker Wire Tracer
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling. For aggressive chip removal in many types of woods. Screw point for easy starting and pulling through wood. Hole in bit for attaching pulling grip. With screw point removed, this bit can be ground to function like a standard combination bit. This wire-tracer is a must-have tester for audio/video installer and data com technicians. This multi-purpose wire tracer is able to identify a variety of wires including Cat V, coax, speaker, phone and any non-energized wires. Each unit comes with a transmitter and a receiver. Under ideal conditions, the receiver will function up to 12 in from the wire being traced.
MULTIMETER SMART DIGITAL      Gardner Bender COM-320 Compression Cable Crimper Gardner Bender FTS-125R Upperhand Fish Tape
Sperry Instruments Smart Multi Meter, Measuring Functions: AC Voltage, Continuity, DC Voltage, Diode Test, Resistance, Display Type: Digital, Power Source: Battery, ABS, Yellow, Dimensions: 7 in L His RCA, BNC, F-Type universal compression crimp tool creates a permanent, water-tight sealed connection. This premium compression tool is professional-grade for strength and durability. GB's Series of UpperHand fish tapes has improved traditional hand fishing with the first ergonomic fish tape in the industry. Easy to grip, easy to retract and backed by an industry leading 5 years limited warranty. The improved housing design is manufactured with impact-resistant ABS and nylon resins that exceed the 25 ft drop test while the corrosion-resistant plated steel wire ensures the toughest, most durable tape for long-lasting use.
FINDER CIRC BRKR UNIV YEL-BLK D'Versibit 16-04-54A Type A Auger Bit 1 in Dia x 54 in OAL MULTIMETER THIN DIGITAL
Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The patented probe design indicates the signal strength through both and audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage. Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval. Hole in bit for attaching pulling grip. Engineered to exceed the expectations of the professional electrician the Sperry Instruments DM6800 thin digital multimeter offers a durable and ergonomic impact-resistant design manufactured to the latest industry standards. At less than 3/4 in thick, this is the thinnest full sized multimeter yet. Engineered with the ability to test AC/DC voltage, amperage, resistance and continuity. Featuring improved audible and visual indicators and a backlit display. Requires two AAA batteries included in the package and designed with both an auto-off function to save battery life and a low battery indicator to ensure the user does not receive incorrect readings due to a low battery. Unit utilizes auto ranging capabilities that allow the meter to determine the resolution based on the application selected without requiring manual range changes. Capable of testing 600 V AC/DC, this unit also measures AC/DC amps (10 A), resistance (200, 2k, 20k, 200k, 2M, 20M Ohm) and continuity (audible). Durable housing is impact-resistant. CAT III (600 V), cETLus and CE rated with a limited lifetime warranty to give our users the peace of mind they deserve. Ships with soft case, 40 in CAT II/III 600V test leads and two AAA batteries included in the package.
Flex Splitter 1940 Conduit Cutter Greenlee FTS438-125BP Fish Tape Greenlee Textron CM-330 Voltage Testers
Cuts metal conduit in seconds with a few turns of the crank and a twist of the conduit. Ample clearance between handle and body. Set conduit size for multiple cuts of the same size. No need to reset. Set blade adjustment with only a screwdriver. In-handle blade storage holds up to five spare blades. Weighs 4 lb. Capacity of 14/2 to 10/4 AWG, 3/8 in flexible metal conduit. Kwik Silver plated fish tape, same strength as conventional steel tape, corrosion-resistant, smooth plated to make it easier to fish with. High-impact nylon, one-piece handle with large handle grip. Self-tensioning, wide, impact-resistant rewinder case with viewports to ensure tape fit and retaining strap on inside to hold tape secure. 400 lb maximum design strength. 0.060 in thick 5 lb. Clamp-on meter for taking basic AC amperage measurements 20, 200, 400 A and has data hold and max hold 2000 count LCD display and a jaw that opens to 1.06 in. Category III 600 V safety rating per UL 61010B-1. Carrying case included.
Greenlee Textron 921 Auger Bit Systems Greenlee Textron DM-45 Digital Multimeters GB-Gardner Bender GCM-500 Lockjaw Volt/Ohm/Am Meters
Kit includes 921-18, 18 in quick connect extension, 921-36, 36 in quick connect extension, 150Q, 1/2 in cable pulling grip and 60A-3/4, 3/4 in auger bit. For most electrical needs. 600 VAC/VDC voltage test, 10 AC/DC amperage measurement. Temperature testing with thermocouple rated -58 to 400 deg F (-50 to 204 deg C). Continuity, diode, duty cycle and frequency testing. Resistance and capacitance measurement. Includes hold, relative reading, backlight, automatic power off and field replaceable fuses. 9 V battery included. Measurement category Cat III, 600 V. ETL approved. The Gardner Bender GCM-500 clamp-on analog multimeter is a 4 function, 8 range manual-ranging tester engineered to measure AC Current (600 A), AC/DC Voltage (600/60 V) and resistance (1000 Ohm). Similar to standard analog multimeters, clamp meters offer a large range of functions with the additional unique ability to measure current without having to contact live conductors. This tester includes a 1-1/2 in jaw size with the lockjaw feature that prevents misuse by only allowing the jaws to open in the amps mode. Unit also offers an 8 position smooth rotary dial, 0 Ohm adjustment dial and a data hold switch to maintain the reading on the easy to read display. Unit meets Cetus agency approvals, is fuse and diode protected and includes a calibration screw. Tester provides a 3 ft drop and 150 lb crush rating as well as a 1 year warranty and includes both test leads and operating instructions in the package. Gardner bender offers over 50 years of experience making professional electrical testers, tools and supplies so you can count on us to provide quality performing products for professional and DIY use.
Greenlee Textron DBITKIT D'Versibit Wire Pulling Kits CLAMP METER 600A TRUE RMS     Gardner Bender GCM-221 Clamp-On Multimeter
Greenlee Textron D'Versibit Wire Pulling Kit, Type B Auger, Includes: 9/16 in, 09-03-54B Type B Auger Bit, 712P Placement Tool and 150 Pulling Grip for 1/2 in Outside Diameter Wire The Sperry Instruments DSA600TRMS true RMS clamp meter has more features and functions without the extra cost. This clamp meter offers a large range of superior functions like advanced temperature measurements and peak hold. The meter gives true RMS readings and measures current without having to contact live conductors. This unit features a data hold switch to maintain the reading on the 5999 count backlit screen and auto power-off functionality to extend battery life. The built-in low battery indicator will ensure you won't get incorrect readings due to low batteries. Audible beeper offers easy continuity check (Buzzer sounds at 100 Ohms or less). We consider safety first, this instrument has been designed and tested according to cETLus standards and is CAT 3 600 V rated. This compact, lightweight, yet durable unit has a crush rating of 250 lb and a 10 ft drop rating the best in the industry. The Gardner Bender digital clamp meter measures current up to 600 A AC, voltage to 600 VAC/VDC and resistance to 1 mOhm. This versatile tool features an easy to read LCD display and data-hold functionality for easy retrieval. It is durably designed with a 6 ft drop and 150 lb crush rating.
Greenlee 430 Spiral Wrap Tracer Poly Twine Dispenser Greenlee CM-600 AC Clamp-On Meter Greenlee 7238SB Knockout Kit
Poly line, 210 lb. average breaking strength, can be blown into conduit and then used to pull in a larger pulling rope or it can be used directly to pull in smaller wires. Can be used directly from the container with power fishing systems. Resists tangling when dispensing. Prepunched hole for dispensing the line. Rot and mildew-resistant. Measures AC amperage, AC/DC voltage and resistance. True RMS for accurate measurements when the voltage or current waveform is distorted by non-linear loads. Amperage measurement 400, 600 A. Voltage measurement 400, 600 V. 3-1/2-digit LCD display. Jaw opens 1.38 in. Auto-power off for longer battery life. Measurement category Cat III, 600 V per UL 3111-1. Greenlee Textron Knockout Kit, Specifications: 1/2 to 2 in, Includes: (1) 1/2, 3/4, 1-1/4, 1-1/2 and 2 in Punches, (1) Driver and (1) Draw Studs
   
 
1