Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS
Choose a sub category:
PIPE CEMENTS PIPE CLEANERS & PRIMERS THREAD SEALANT COMPOUNDS
THREAD SEALANT TAPES GAS LEAK DETECTORS PLUMBERS PUTTY
PLUMBING EPOXYS
Sort By:
1
Harvey's 017072B-500 Pipe Thread Seal Tape Harvey's 017117B Pipe Thread Seal Tape ProSource PMB-445 Pipe Seal Tape
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Harvey Thread Seal Tape, PTFE, Red/White, 520 in L, 1/2 in W, 0.003 in Thick, Density: 0.4 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 % The plumber tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow.
Plumb Pak 04151 Pipe Thread Seal Tape TAPE PTFE GRAY 1/2IN X 260FT  Harvey's 017252-144 Pipe Thread Seal Tape
Plumb Pak Thread Seal Tape, PTFE, 520 in L, 1/2 in W Hercules Mega tape is an all-purpose, professional-grade PTFE thread-sealing tape designed for use on a wide range of threaded pipes. Harvey Thread Seal Tape, PTFE, White, 520 in L, 3/4 in W, 0.003 in Thick, Density: 0.4 +/- 0.1 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 %
Harvey's 017209B Pipe Thread Seal Tape Oatey 31166 Plumbers Putty Harvey's 043010 Plumbers Putty
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily. Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open.
Harvey's 023015-48 Pipe Joint Compound Plumb Pak PP20855100 Pipe Thread Seal Tape Harvey 030005-144 Pipe Thread Compound
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. For use on plumbing threads to prevent leaking. Harvey? pipe thread stick is a non-hardening gray thread compound designed to lubricate and seal threaded joints on metal pipe.
Oatey 31229 Great White Sta Put 25101 Non-Mastic Plumbers Putty CLOTH CLEANING PIPE COTTON
Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, Ammonia and Nitrogen gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Molds easily and will not harden, crumble, crack or shrink. A flexible, stretchable compounds for professional use in setting bowls, fixtures, faucets, basin cocks, strainers, plugs, sink frames and all other sealing and caulking applications. Provides a watertight seal. Will not stick to hands. Excellent low temperature properties. Meets Fed. Spec. A-A-3110 (formerly TT-P-1536A). Not for use on porous surfaces. Oatey? medium clear PVC cement is formulated for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit.
Oatey 31403 Gas Line Thread Tape Harvey's 044010 Epoxy Putty TAPE SEAL PTFE 1X520
Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 to 1.5 g/cu-cm and 4 mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box. Hardens like steel in 20 mins. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time. 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Harvey's 017165-144 Pipe Thread Seal Tape Harvey's 017065 Pipe Thread Seal Tape Oatey 31402D Water Line Thread Seal Tape
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Extra heavy, full density tape especially for gas lines. Recommended leak-proof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Permits easy disassembly. Pressure rating of 10,000 psi 0.0035 mil thick, tolerates up to -450 to 500 deg F. Meets Federal Specification T-27730A. UL listed. Provides fast positive seal for water lines, sewage lines and sprinkler systems. Effective on metal or plastic threads. 3 mil thick and density of 1.35 to 1.5 g/cu-cm. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton.
Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Harvey's 039300 Gas Leak Detectors Harvey's 029035 Pipe Thread Compound
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Detects any gas leak in just a few seconds on all types of tubing, valve, cylinders, pressurized tanks or any system under air, gas or oxygen pressure. May be used at temperatures between -50 to 160 deg F. Non-toxic, biodegradable, user friendly, non-corrosive and non-irritating to most skin. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle.
Oatey 31177 Stain-Free Plumbers Putty TAPE PTFE GRAY 3/4 X 1000IN   Oatey 30779 All Purpose Pipe Cleaner
Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily. Hercules? MEGATAPE is an all-purpose, professional-grade PTFE thread-sealing tape designed for use on a wide range of threaded pipes. Oatey Clear Cleaner is a simple and effective cleaner formulated for ABS, PVC and CPVC pipe and fittings that flows freely and evaporates quickly.
Rectorseal 25790 Pipe Thread Sealant Oatey 31012 PVC Cement Oatey 30755 PVC/CPVC Primer
Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564. Oatey purple primer is an NSF listed, aggressive primer for use on PVC and CPVC pipe and fittings.
Oatey 30999 ABS Cement Plumb Pak PP854-2 Pipe Joint Compound Oatey 30883 PVC Cement
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Plumb Pak Pipe Joint Compound, Net Content: 2 oz, Tube Medium bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature of 40 to 110 deg.
Harvey's 019050-24 PVC/CPVC Purple Primer Oatey 30780 PVC/CPVC Primer/Cleaner Oatey 30890 Rain-R-Shine
Harvey? purple primer is a professional-grade purple primer for use on all schedules and classes of CPVC and PVC pipe and fittings. Oatey Purple primer/cleaner is a dual-purpose primer and cleaner for use on all schedules and classes of CPVC and PVC pipe and fittings. Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F.
Oatey 30750 Pipe Primer/Cleaner Oatey 30818 All-Purpose Cement CEMENT PVC CLEAR MEDIUM 4OZ
Recommended for use with PVC and CPVC pipe and fittings. Formulated to remove dirt and oil from the surface of the piping, as well as soften the piping in preparation for solvent welding. NSF Standard 61 listed for PW, DWV and sewer. Meets ASTM standard F 656. Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. Oatey? PVC Medium Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
PC-Plumbing 025598 2-Part Hand Moldable Epoxy Putty Rectorseal 55910 PVC/CPVC Primer/Cleaner Oatey 31128 CPVC Pipe and Fitting Cement
PC-Plumbing? epoxy putty is for pipes. use PC-Plumbing? to stop leaks in less than 60 mins. Pre-measured and easy to use and two-part epoxy putty does not require tools. Hand mix and apply. NSF? approved for plumbing repairs and for contact with potable water supply pipes. Hi-etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for excellent bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both SCH 40 and 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dia. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
Harvey's 023030 Pipe Joint Compound Oatey 31230 Great White Oatey 31910 Flow-Guard Gold
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included. Medium bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in Dia interference fit only and systems up to 180 deg F. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
Harvey 019100-24 All Purpose Pipe Cleaner Brass Craft PS1087 Seal 'N Check Kit CEMENT PVC CLEAR MEDIUM 4OZ
Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings. Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Oatey? FUSION? Single-Step Clear Self-Priming Medium Bodied PVC Cement is recommended for residential and DIY plumbing projects. Saving time, money and cleanup, it eliminates the extra step of priming in PVC projects, while also applying easily with included in-lid dauber and providing a neat, transparent finish. This clear, low odor, medium bodied cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 4 in. and non-pressure applications up to 6 in. with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
Harvey's 043050 Plumbers Putty Harvey's 018450-24 P-6E Oatey Fix-It Epoxy Putty
Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open. For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set, designed for use on all duct and conduit applications through 6 in Dia. Apply at temperatures 40 to 110 deg F. NSF certified for use in potable water, sewer, drain and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can. For sealing, patching and mending compounds. Repairs anything that leaks or is broken. Steel filled, mixes in your hands and hardens in minutes. Ideal for fabricating or rebuilding parts. May be drilled, tapped, filed, sealed and painted. Resists abrasion and a variety of chemicals. Contains no solvents, is non-toxic and will not shrink.
Oatey 31129 CPVC Pipe and Fitting Cement Harvey's 025020 Pipe Thread Compound Harvey's 044150-12 Epoxy Putty
Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dias. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle. Hardens like steel in 20 mins. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time.
Oatey 31013 PVC Cement Harvey's 018400-24 PVC Cement Harvey's 018100-24 P-4
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes such as SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 to 110 deg F. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Harvey's 018500-24 A-6 TAPE SEAL THRD SS 1/2INX260FT Harvey 019110-24 All Purpose Pipe Cleaner
Medium-bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings, SCH 40, Types I and II, up to 6 in. Apply at temperatures 40 to 110 deg F. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings.
Plumb Pak PP854-1 Pipe Thread Sealant CEMENT PVC CLEAR MEDIUM 8OZ   Oatey 15804 Hercules Pipe Thread Sealant
Plumb Pak Pipe Thread Sealant, Net Content: 2 oz, Tube, Applicable Materials: TFE Oatey? PVC Medium Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years. Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents.
Rectorseal 55902 PVC Cement Oatey 30246 Primer/Cement Pack Oatey 30917 ABS Cement
Regular body cement specifically formulated for all PVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). For use on PVC pipe through 2 in SCH 40 pressure piping and up to and including 4 in SCH 40 non-pressure (DWV) piping, it may also be used for making up transition joints between ABS and PVC in non-pressure (DWV) piping. Dauber top. Contains one can of regular clear PVC cement and one can of NSF purple primer. Ideal size for most pipe installations. Medium-bodied ABS resin in solvent solution formula for use on ABS pipe and fittings of diameter up to 6 in. Formulated especially for the hot, arid climates in the western states. Use for all non-pressure applications, for all types and grades of ABS pipe and fittings for DWV. Meets ASTM D-2235. Sales area - only in the western region.
Harvey's 043105 Plumbers Putty Oatey 30850 PVC Cement Oatey 30756 PVC/CPVC Primer
Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open. Heavy bodied clear cement for PVC pipe and fittings. Up to 12 in Dia for SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Exceeds ASTM D-2564. NSF and UPC listed. Oatey purple primer is an NSF listed, aggressive primer for use on PVC and CPVC pipe and fittings.
Oatey 15420 Pro Dope Harvey's 018700-24 C-4 Harvey's 018110-24 P-4
Hercules? PRO DOPE? is an oil based thread sealant with a uniform, smooth consistency that ensures easy application. PRO DOPE? will not drip, is lead-free, non-toxic and won't spill. It is non-separating and provides a tight, positive, leak-free seal. PRO DOPE? prevents rust and inhibits corrosion by forming a protective coating on threads. It is non-hardening and joints can be disassembled without damage to pipe fittings or threads. PRO DOPE? is easily applied with a natural bristle brush in temperatures as low as -15 deg F and performs over a temperature range of 0 to 350 deg F. PRO DOPE? is a gray colored thread sealant which contains no lead. Regular-bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings, schedule 80 and copper tube size, CPVC hot and cold water pipe and fittings up to 4 in Dia. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 to 110 deg F. UPC listed. Meets ASTM F-493. Dauber can. Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Harvey's 018200-24 P-2 PVC Cement Harvey's 019060-24 PVC/CPVC Purple Primer Oatey 30821 All-Purpose Cement
Designed for use on PVC pressure pipe and fittings up to 12 in. Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Harvey? purple primer is a professional-grade purple primer for use on all schedules and classes of CPVC and PVC pipe and fittings. Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Harvey's 029048 Pipe Thread Compound Rectorseal 31631 Tru-Blu Oatey 31911 Flow-Guard Gold
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle. Rectorseal Tru-Blu? pipe thread sealant with PTFE is a fast dry, flexible set thread sealant designed for high vibration environments such as refrigeration and industrial applications. PTFE has been added to enhance thread lubrication during assembly and break out. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC. Great for use as a positive lock and seal on threaded fasteners. Medium bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in Dia interference fit only and systems up to 180 deg F. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
Rectorseal 23631 T-Plus 2 Harvey's 018000-24 Mp-6 Oatey 30900 ABS/PVC Transition Cement
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings, SCH 40 and 80, Types I and II, up to 6 in. For potable water, pressure pipe, conduit, drain waste and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Dauber can. Medium bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6 in Dia in non-pressure transition joints. Recommended application temperature is 40 to 110 deg F. Meets ASTM D-3138.
Rectorseal 55912 PVC/CPVC Primer/Cleaner Harvey 019120-12 All Purpose Pipe Cleaner PRIMER CPVC/PURPLE HANDY 4OZ
Hi-etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for excellent bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both SCH 40 and 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings. Contains 1 can of PVC Cement and 1 can of NSF purple primer.
Harvey's 018510-24 A-6 Harvey's 023045 Pipe Joint Compound Oatey 31014 PVC Cement
Medium-bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings, SCH 40, Types I and II, up to 6 in. Apply at temperatures 40 to 110 deg F. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564.
Brass Craft PSC1094L Gas Leak Detectors ProPoxy 20 25515 Fast Acting Epoxy Putty Rectorseal 55970 Abs/PVC/CPVC Cement
Used for natural, LP gas, mixed, manufactured and LP gas-air mixtures. Seals, mends, bonds and repairs. Made of pre-measured, steel reinforced dark gray/black epoxy resin with a contrasting strip of hardener embedded in the center. Two part compounds mixes to form a permanent steel-hard bond. Adheres to almost any surface. Can be drilled, filed, sanded, painted and machined. Applies to damp or wet surfaces. Non-conductive. Medium body multi-purpose cement formulated for use on all PVC, CPVC and ABS pipe applications such as potable water, conduit and drain, waste and vent (DWV). It is for use on all PVC, CPVC and ABS pipe classes for pressure systems through 2 in SCH 40 and non-pressure piping systems through 6 in SCH 40 (excluding SCH 80), also for use on transition joints to join PVC to CPVC and PVC to ABS. Exceeds ASTM F 493 specifications and is LEED compliant. Dauber top.
Oatey 32161 Hot Blue Lava PVC Cement PRIMER PURP/AP CMNT HANDI 4OZ Rectorseal 25631 Pipe Thread Sealant
Medium bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast setting hot cement formulated for wet conditions and quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature of 40 to 110 deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564. Oatey All-Purpose Cement and Primer Handi Pack, Net Content: Two 4 oz cans, Purple, Red Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Oatey 30782 All Purpose Pipe Cleaner Harvey's 025050 Pipe Thread Compound Oatey 30863 PVC Cement
Oatey Clear Cleaner is a simple and effective cleaner formulated for ABS, PVC and CPVC pipe and fittings that flows freely and evaporates quickly. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle. Heavy bodied clear cement for PVC pipe and fittings. Up to 12 in Dia for SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Exceeds ASTM D-2564. NSF and UPC listed.
Harvey's 018410-24 PVC Cement Oatey 30891 Rain-R-Shine Harvey's 018210-24 P-12
Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes such as SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 to 110 deg F. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F. Designed for use on PVC pressure pipe and fittings up to 12 in. Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Harvey's 019530 Primer/Cement Pack Oatey 15427 Pro Dope Rectorseal 55914 PVC/CPVC Primer/Cleaner
Convenient project pack contains 4 oz purple primer and 4 oz PVC solvent cement. For most PVC pipe projects. Twin pack. Hercules? PRO DOPE? is an oil based thread sealant with a uniform, smooth consistency that ensures easy application. PRO DOPE? will not drip, is lead-free, non-toxic and won't spill. It is non-separating and provides a tight, positive, leak-free seal. PRO DOPE? prevents rust and inhibits corrosion by forming a protective coating on threads. It is non-hardening and joints can be disassembled without damage to pipe fittings or threads. PRO DOPE? is easily applied with a natural bristle brush in temperatures as low as -15 deg F and performs over a temperature range of 0 to 350 deg F. PRO DOPE? is a gray colored thread sealant which contains no lead. Hi-etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for excellent bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both SCH 40 and 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can.
Harvey's 018710-24 C-4 CPVC Cement Oatey 30783 PVC/CPVC Primer/Cleaner Oatey 30812 Bonding Adhesive
Regular-bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings, schedule 80 and copper tube size, CPVC hot and cold water pipe and fittings up to 4 in Dia. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 to 110 deg F. UPC listed. Meets ASTM F-493. Dauber can. Oatey Purple primer/cleaner is a dual-purpose primer and cleaner for use on all schedules and classes of CPVC and PVC pipe and fittings. Oatey? LO-VOC X-15? PVC bonding adhesive provides a permanent, watertight seal when joining flexible PVC membrane sheets together. The adhesive is ideal for use in tile showers and other concealed water-proofing applications, adhering shower pan liner seams together and dam corners over the shower curb. This fast-acting adhesive creates a strong, lasting bond.
Oatey 30925 ABS/PVC Transition Cement Rectorseal 55973 Abs/PVC/CPVC Cement Oatey 15806 Hercules Pipe Thread Sealant
Medium bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6 in Dia in non-pressure transition joints. Recommended application temperature is 40 to 110 deg F. Meets ASTM D-3138. Medium body multi-purpose cement formulated for use on all PVC, CPVC and ABS pipe applications such as potable water, conduit and drain, waste and vent (DWV). It is for use on all PVC, CPVC and ABS pipe classes for pressure systems through 2 in SCH 40 and non-pressure piping systems through 6 in SCH 40 (excluding SCH 80), also for use on transition joints to join PVC to CPVC and PVC to ABS. Exceeds ASTM F 493 specifications and is LEED compliant. Dauber top. Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents.
Harvey's 018120-12 P-4 Oatey 30834 All-Purpose Cement Harvey's 018010-24 Mp-6
Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Harvey Cement, Net Content: 16 oz, Liquid, Clear/Milky, Odor/Scent: Solvent, Compositions: Furan, Tetrahydro-, Acetone, Cyclohexanone, Methyl ethyl ketone, Polyvinyl chloride, Ethene, chloro-homopolymer, chlorinated, Silica, amorphous, fumed, VOC Content: <325 g/L, Application Method: Spray, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Flammability Rating: 3, Temperature Rating: 40 to 110 deg F, Density: 0.94, Applicable Materials: ABS Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings SCH 40 and 80, Types I and II, up to 6 in. For potable water, pressure pipe, conduit, drain waste and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Dauber can.
CEMENT PVC CLEAR MEDIUM 10OZ  Harvey 19520 All Purpose Pipe Cleaner Oatey 31132 PVC Cement
Oatey? medium clear PVC cement is formulated for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Convenient project pack contains 4 oz all-purpose pipe cleaner and 4 oz multi-purpose solvent cement. For most ABS, PVC or CPVC projects. Twin pack. Medium bodied clear cement for use on PVC pipe and fittings. Up to 6 in Dia. Formulated for fast initial set-up at temperatures down to -15 to 100 deg F. SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Non-pressure, DWV, up through 4 in Dia: no primer needed where local codes permit. Meets ASTM D-2564.
Harvey's 019070-12 PVC/CPVC Purple Primer Oatey 30876 PVC Cement Oatey 30757 PVC/CPVC Primer
Harvey? purple primer is a professional-grade purple primer for use on all schedules and classes of CPVC and PVC pipe and fittings. Heavy bodied clear cement for PVC pipe and fittings. Up to 12 in Dia for SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Exceeds ASTM D-2564. NSF and UPC listed. Oatey? purple primer is an NSF-listed primer for use on PVC and CPVC pipe and fittings.
Oatey 31121 PVC Cement Oatey 30893 Rain-R-Shine Harvey's 019550 Primer/Cement Pack
Very heavy bodied medium setting gray colored cement for use on PVC pipe and fittings. Up to 18 in Dia for SCH 40 and SCH 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 to 110 deg F. Meets ASTM D-2564. Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings up to 6 in Dia. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F. Convenient project pack contains 4 oz purple primer and 4 oz. blue PVC wet set cement. For most wet condition projects. Twin pack.
Oatey 32162 Hot Blue Lava PVC Cement Oatey 32166 Hot Orange Lava PRIMER CLEAR NSF LISTED 16OZ
Medium bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast setting hot cement formulated for wet conditions and quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature of 40 to 110 deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564. Heavy bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6 in Dia with interference fit. 1-step, fast curing cement designed for cut-in applications where limited time is available for down-time. Low VOC solvent cement meets California south coast air quality management district (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 deg F. Recommended application temperature 40 to 110 deg F. Approved for FlowGuard Gold? and Corzan? CPVC piping systems. Meets ASTM F-493 and ASTM D-2846. Oatey Primer, 16 oz Net Content, Liquid Form, Clear, Solvent Odor/Scent, Compositions: Acetone, Cyclohexanone, Furan, Tetrahydro, Methyl Ethyl Ketone, <100 cPs Viscosity, <550 g/L VOC, 14 to 23 deg F Flash Point, 151 deg F Boiling Point, 6.97 lb/gal Density, 0.82 to 0.86 Specific Gravity, Natural Bristle Brush or Roller Application Method
Rectorseal 23551 T-Plus 2 Pipe Thread Sealant Harvey 019130-12 All Purpose Pipe Cleaner Oatey 31095 PVC Cement
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings. heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12 in Dia with interference fit, up to 18 in for non-pressure. Low VOC solvent cement meets California south coast air quality management district 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV.
Oatey 31015 PVC Cement Rectorseal 25551 Pipe Thread Sealant Oatey 31094 PVC Cement
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564. Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12 in Dia with interference fit, up to 18 in for non-pressure. Low VOC solvent cement meets California south coast air quality management district 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV.
Plumb Pak PP855-1 Pipe Thread Seal Tape CEMENT PVC MED CLR 32OZ       Harvey's 018220-12 P-2 PVC Cement
For use on plumbing threads to prevent leaking. Medium bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature of 40 to 110 deg F/4 to 43 deg C. Meets ASTM D-2564. Designed for use on PVC pressure pipe and fittings up to 12 in. Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Harvey's 018720-12 C-4 CPVC Cement Harvey's 018320-12 PVC Cement Harvey's 019080-12 PVC/CPVC Purple Primer
Regular-bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings, schedule 80 and copper tube size, CPVC hot and cold water pipe and fittings up to 4 in Dia. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 to 110 deg F. UPC listed. Meets ASTM F-493. Dauber can. Fast setting, all weather, medium bodied PVC solvent cement specifically recommended for cold weather and fast setting pressure applications. Recommended for pressure pipe SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Formulated for fast initial set-up at temperatures down to 10 deg F. Effective temperature range -15 to 110 deg F. Meets performance requirements of ASTM D-2564. Dauber can. Harvey? purple primer is a professional-grade purple primer for use on all schedules and classes of CPVC and PVC pipe and fittings.
Oatey 30795 All Purpose Pipe Cleaner Oatey 30894 Rain-R-Shine Oatey 15808 Hercules Pipe Thread Sealant
Oatey Clear Cleaner is a simple and effective cleaner formulated for ABS, PVC and CPVC pipe and fittings that flows freely and evaporates quickly. Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F. Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents.
Harvey's 018020-12 Mp-6 Oatey 30902 ABS Cement Plumb Pak PP855-100 Pipe Thread Seal Tape
Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings, SCH 40 and 80, Types I and II, up to 6 in. For potable water, pressure pipe, conduit, drain waste and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Dauber can. Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. For use on plumbing threads to prevent leaking.
PRIMER PURPLE 32 OUNCE        Harvey's 018420-12 PVC Cement Harvey's 025080 Pipe Thread Compound
Oatey purple primer is an NSF listed, aggressive primer for use on PVC and CPVC pipe and fittings. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes such as SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 to 110 deg F. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle.
Oatey 31008 PVC Cement Harvey's 018130-12 P-4 Harvey's 028005-144 Pipe Thread Compound Display
Heavy bodied clear cement for PVC pipe and fittings. Up to 12 in Dia for SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Exceeds ASTM D-2564. NSF and UPC listed. Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can. For sealing and lubricating threaded pipe joints. In smooth paste form. For steam, water, air and natural gas. Does not contain lead. Wipes clean from hands. Hang tab tube.
Oatey 31226 Pipe Joint Compound Rectorseal 25431 Pipe Thread Sealant Oatey 30847 All-Purpose Cement
Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic, may be used on water, natural gas, steam and air lines. Ideal for applying gaskets to flanges. Not for use on plastic threads. Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Harvey's 018230-12 P-12 Harvey's 018030-12 Mp-6 CLEANER CLEAR 32 OUNCE
Designed for use on PVC pressure pipe and fittings up to 12 in. Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings, SCH 40 and 80, Types I and II, up to 6 in. For potable water, pressure pipe, conduit, drain waste and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Dauber can. Oatey Clear Cleaner is a simple and effective cleaner formulated for ABS, PVC and CPVC pipe and fittings that flows freely and evaporates quickly.
Rectorseal 23431 T-Plus 2 Pipe Thread Sealant Harvey's 018430-12 PVC Cement Oatey 31105 PVC Cement
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes such as SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 to 110 deg F. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12 in Dia with interference fit, up to 18 in for non-pressure. Lo-V.O.C. solvent cement meets California south coast air quality management district 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV.
Oatey 32167 Hot Orange Lava Oatey 31122 PVC Cement PLUMBERS TAPE 1/2X.004X260IN
Heavy bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6 in Dia with interference fit. 1-step, fast curing cement designed for cut-in applications where limited time is available for down-time. Low VOC solvent cement meets California south coast air quality management district (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 deg F. Recommended application temperature 40 to 110 deg F. Approved for FlowGuard Gold? and Corzan? CPVC piping systems. Meets ASTM F-493 and ASTM D-2846. Very heavy bodied medium setting gray colored cement for use on PVC pipe and fittings. Up to 18 in Dia for SCH 40 and SCH 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 to 110 deg F. Meets ASTM D-2564. The Vulcan thread sealing tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow.
STICK FIX-IT 1.33OZ CLIP STRIP Harvey's 017031-144 Pipe Thread Seal Tape CEMENT PVC CLEAR MEDIUM 16OZ
Oatey? Fix-It? stick epoxy putty is a multi-purpose sealing, patching and mending compound for repairing leaks, holes or cracks in a wide range of materials. Two part epoxy putty stick can repair leaks, holes or cracks in materials such as plastic, metals, fiberglass, concrete or ceramics. Can be drilled, machined, filed, tapped, sanded, sealed and painted when fully hardened. Non-toxic. Can be used on dry or wet surfaces. Oatey? products have earned the trust of plumbing professional for over 100 years. 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Oatey? PVC Medium Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
PRIMER CLEAR NSF LISTED 8OZ   Harvey's 017209-144 Pipe Thread Seal Tape DAUBER PLASTIC ADJ 1/2-1IN
Oatey Primer, 8 oz Net Content, Liquid Form, Clear, Solvent Odor/Scent, Compositions: Acetone, Cyclohexanone, Furan, Tetrahydro, Methyl Ethyl Ketone, <100 cPs Viscosity, <550 g/L VOC, 14 to 23 deg F Flash Point, 151 deg F Boiling Point, 6.97 lb/gal Density, 0.82 to 0.86 Specific Gravity, Natural Bristle Brush or Roller Application Method 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Oatey? adjustable daubers are ideal for applying solvent cement to pipe and fittings.
   
 
1