Home > HARDWARE > WINDOW & DOOR HARDWARE > PATIO DOOR HARDWARE
Choose a sub category:
LATCHES / HANDLES PATIO DOOR REPAIR PARTS
Sort By:
1
Prime Line B629 Flat Edge Sliding Door Roller Assembly Prime Line A 127 Door Latch Prime Line B551 Bottom Mount Sliding Door Roller Assembly
Used on Croft and Keller sliding screen doors. 1/4 in W x 3/8 in Dia flat nylon ball bearing wheel with 3/8 in threaded hex hub. Includes 2 rollers and 2 fasteners. This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch. Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
Prime Line B 512 Concave Edge Spring Tension Roller Assembly Prime Line B 609 Concave Edge Spring Tension Roller Assembly Prime Line B 521 Concave Edge Spring Tension Roller Assembly
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers. Bent spring design used by Academy Mfg. and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw. 1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat-treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
Prime Line B 638 Concave Edge Spring Tension Roller Assembly Prime Line A 111 Door Latch/Pull Prime Line B515 Sliding Spring Tension Door Roller Assembly
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw. Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H. Used as top and bottom roller by several patio door manufacturers. Consists of 1/4 in W center groove nylon wheel, 2 in L x 3/8 in W steel housing, high-tension heat-treated steel spring.
Prime Line B 649 Concave Edge Spring Tension Roller Assembly Prime Line B518 Sliding Screen Tension Door Roller Assembly Prime Line A 150 Cross Latch and Pull
Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies. Used as top and bottom roller. Plastic wheel with center groove. 1-7/8 in L housing. Heat-treated, high-tension steel spring and #8-32 x 1-1/4 in Phillips pan head screw. Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch and installation screws. 2 in W x 4 in H handles.
Prime Line B 639 Concave Edge Spring Tension Roller Assembly Prime Line B570 Sliding Spring Tension Door Roller Assembly Prime Line B513 Sliding Spring Tension Door Roller Assembly
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw. Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat-treated steel v-spring (2 in L before and 2 in L after bend). Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
Prime Line A 142 Cross Latch and Pull Hampton V1195 Reversible Door Latch Prime Line D1503 Concave Edge Sliding Door Roller
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws. Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in thick doors. 6-1/2 in distance between attaching screws. Contents: 2 rollers Steel ball bearing roller, steel inner race with 1/4 in hole, center grooved.
Prime-Line B 705 Bug Seal Prime Line D 1502 Concave Edge Center Grooved Roller Assembly Prime Line D1688 Concave Edge Sliding Door Roller Assembly
Prime-Line Bug Seal, Vinyl, 7 in L, 3/4 to 1-3/8 in W For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4 in - 20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut. Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.
Prime Line D1723 Concave Edge Sliding Door Roller Assembly Prime Line D 1563 Concave Edge Roller Assembly Prime Line E-2000 Cylinder Lock
Used by many patio door manufacturers. Steel ball bearing roller in adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing with 10-32 machine thread hole on top center and 1/4-20 side threads for mounting. Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation. Cylinder Lock, 1-1/4 in, 5-pin tumbler lock with 2 keys, hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is compatible with Weiser, Kwikset & Weslock.
Prime Line D 1831 Concave Edge Roller Assembly Hampton V1147H Inside Door Handle Prime Line C 1190 Door Pull
Steel ball bearing roller, adjustable steel housing assembly. Used by many patio door manufacturers. 2-5/8 in L, 1-1/8 in H and 3/4 in W housing dimensions. 10-32 machine thread on top and 1/4-20 machine thread on end of housing. Wright replacement oak patio door handle can be installed on the interior plate of the V1195 or VK1195 flush-mounted latches to provide a larger pulling surface. Black die-cast supports w/wood handle. Mounting posts come finished in black colored paint and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2 to 6-5/8 in center-2-center. Surface-mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment.
Prime Line E 2014 Mortise Lock Prime Line C 1043 Door Handle Set Prime Line B 684 Concave Edge Center Grooved Roller Assembly
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in. Fits all popular flush lock punch outs for 1 in thick doors. 3/4 x 2-3/4 in, universal design, die-cast, chrome finish keeper #E-2040 adjusts vertically. Includes 7-1/4 in L x 7/8 in W inside and outside pulls, latch on inside pull, keeper, installation fasteners and 4 assorted hooks (3/8 in, 3/4 in, 1/2 in and 5/8 in). 6-5/8 in installation hole spacing. Nylon outer housing, aluminum inner housing with center grooved nylon wheel with adjustment cam. Contents: 2 roller assemblies, installation screws.
Prime Line D 1607 Concave Edge Adjustable Roller Assembly Prime Line D1808 Concave Edge Sliding Door Roller Assembly Prime Line E-2164 Mortise Lock
2-roller tandem design. 6-1/4 in L x 1-3/16 in H x 11/16 in D adjustable steel housing with 2 steel ball bearing rollers. Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing width: 3/4 in. Roller edge type: Concave. Contents: 1 roller assembly. Mortise Lock for Sliding Patio Doors, 45 deg lever slot. Adaptor faceplate allows for use on wood and vinyl patio doors. 4-5/8 in hole center (hole to hole). 45 deg keyway.
ROLLER SLDG DR BRS STL BEARING Hampton VK1195 Door Lockset Hampton VK1104 Locking Reversible Door Handle
1-1/4 in tandem steel ball bearing rollers; adjustable steel housing; dimensions: thickness 11/16 in; length 3-1/8 in; height 1-1/32 in. Roller edge type: Concave. 2 tandem wheels in roller assembly. Wright Products flush mount patio door latch will work on both right or left hand door applications. Aluminum finish only. Wright Products Door Handle, Locking, Reversible, Aluminum/Wood, Oak, Includes: Key Locking Unit
Prime Line C 1107 Sliding Door Lock Prime Line C-1018 Internal Lock Lever Handle Set HANDLE SLIDING DOOR BLK AL
Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in thick door rails. Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in thick door rails. Extruded aluminum inside pull, clamp-latch with metal activator, die-cast outside pull has knock-out for converting to keyed cylinder lock, latch hook profile is 1/4 in, projection is 1/2 in, used by many patio door manufacturers.
Hampton V1104 Reversible Door Latch Prime Line C-1095 Internal Lock Lever Handle Set HANDLE INTERNAL DOOR WOOD
For 1 to 1-3/8 in aluminum doors. Internal latching, reversible for right or left hand application. Oak handle. 3-15/16 in installation hole spacing. Internally latched, reversible for right or left hand openings. Secondary night lock feature prevents external latch operation for added security. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel, sliding glass door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast. Includes inside wood pull and latch, outside pull, keeper and installation fasteners. For 1 in thick door rails. Hook style latch, designed to fit 90% of all internally latched doors, reversible right or left hand openings, complete with keeper, locking unit with key, automatic unlatching options prevents accidental lockout.
Prime Line C-1204 Mortise Lock Handle Set Prime Line C1116 Door Handle Set LOCK SLDG DR STL PLTD
Standard reversible surface-mount for left or right-handed mortise-locking doors. Die-cast inside pull has wood handle, die-cast thumb turn and steel latch activator. Outside pull is die-cast. Extruded aluminum inside pull; clamp-latch with metal activator; die-cast outside pull has knockout for converting to keyed cylinder lock; latch hook profile is 1/4 in; projection is 1/2 in; used by many patio door manufacturers. Handle Type: Surface-Mounted. Latch Style: Clamp Style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners. Steel mortise latch designed for wood stiles, adjustable bolt throw. Vertical keyway, round faceplate, slanted housing corners. 1000 lb strength.
Prime Line C-1131 Mortise Lock Handle Set HANDLE SET SLIDING DOOR WHITE HANDLE SLDG DR WHT MORTISE
Die-cast outside pull, inside pull with wood handle, die-cast thumb turns with steel latch activator. Includes one inside pull with thumb latch, one outside pull and installation fasteners. Low-profile die-cast handle set for mortise locks, hook style latch, non-handed outside pull can be keyed using E 2144 key cylinder adapter kit. Standard reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with steel latch activator. Outside pull is die-cast and has a removable knockout plug for adding a key cylinder. Note: Mounting holes may need to be enlarged to 5/16 in Dia if base of handle does not seat flush against surface of door.
HANDLE SET SLIDING DOOR WHITE
Reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with hook style steel latch activator. Outside pull is die-cast and must use an E-2145 if key locking feature is desired. NOTE: Latch Lever is offset from center.
   
 
1