|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet poles. Reinforced design allows for interior and exterior uses. Single screw mounting. Includes one pair of pole sockets and screws.
|
National Hardware V211S Bracket Screw, Steel, Zinc
|
National Hardware V108S Bracket Screw, Steel, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg, second measurement denotes nominal length of wall leg. Bulk pack.
|
N 6568 is a set of two nylon plastic closet pole sockets for a standard 1-3/8 in closet pole. The 2-3/16 in Dia reinforcement flange also dresses off the installed socket.
|
National Hardware MPB107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware BPB107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
National Hardware V211S Bracket Screw, Steel, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed mount and ShelfTrack? mounting systems. The heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of the SuperSlide? shelf and hang rod.
|
National Hardware V107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
ClosetMaid Support Bracket, 12 in L, 2 in W, 2 in H, White, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets and screws.
|
1-3/8 in Dia with single screw mounting. Includes two pieces of-3/4 in screws and pole sockets.
|
The U 10165 is a shelf support peg, with a 5 mm diameter. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
Fits up to 1-3/8 in Dia closet poles. Reinforced design allows for interior and exterior uses. Single screw mounting. Includes one pair of pole sockets and screws.
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 24 in H x selected length. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Converts shelf and rod shelving, 12 in and 16 in deep, to a continuous slide. Just add the brackets and choose your length of ClosetMaid? hang rod. Hang rod snaps into bracket to create an continuous slide for hangers.
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed mount and ShelfTrack? mounting systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2 in pan head screws for mounting brackets to the wall. Four 3/4 in pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf and rod bracket.
|
White plastic, packaged on pegable card.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
The ProSource shelf bracket dimensions are 1/16 in W x 2-3/8 in H x selected depth. Suitable to use with ProSource shelving. The UPC is tagged.
|
Designed to fit into the fast mount standards and load tested to 100 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U 10166 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
Prime-Line Shelf Support Peg, Load Rating: 5 lb, Peg Diameter: 5 mm, Peg Length: 3/8 in, Plastic, Mill, Clear
|
Use to join two shelves together to create a continuous run of shelving.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ClosetMaid Shelf End Cap, Dimensions: 1/4 in Dia x 0.4 in D, Plastic, White, Suitable for: ClosetMaid Shelf and Rod Shelving, Includes: (10) Small End Caps and (4) Large End Caps
|
Use for mounting 1 in wood or steel closet poles. Satin brass color.
|
Fits up to 1-3/8 in Dia closet pole or 1 in Dia pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy and strong. Includes one pair of pole sockets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
U 10136 is a shelf support peg with a 1/4 in Dia. Plastic construction and used by many cabinet manufacturers. The 5 lb maximum safe load per peg.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
U 10162 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U 10156 is a plastic shelf support peg with a 3 mm diameter steel peg, to provide extra strength when needed. Used by many cabinet manufacturers. 10 lb maximum safe load per peg.
|
ClosetMaid Shelving Support Bracket, 16 L, 2 in W, 2 in H, White, Steel, Epoxy-Coated
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets and screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-3/8 in Dia with single screw mounting. Includes two pieces of-3/4 in screws and pole sockets.
|
National Hardware V103 Pole Socket Set, Dimensions: 1-3/8 in Dia, Wood, Natural, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
Knape & Vogt Closet Pole End Cap, Plastic, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware 110BC Shelf Bracket, 35 lb Weight, Projection: 8 in, Screw Mounting, 7/32 in Mounting Hole, 8 in Length, 10 in Width, 1.91 in Height, 0.39 in Thickness, Steel, Zinc, Includes: (12) #7 x 3/4 in and 1-1/4 in Screws
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Screws are 1-1/2 in long with a #8 body and #6 head.
|
Screws are 1-1/2 in long with a #8 body and #6 head.
|
Snaps securely into place. For use with #233 and #255. High-strength steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ClosetMaid Support Bracket, White, Steel, Includes: (1) #8 Pin, (1) Anchor
|
National Hardware Pole Socket Set, Steel, White, Suitable for: Up To 1-3/8 in Dia Pole, Includes: (1) Pair of Sockets and Fasteners
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 36 in H x selected length. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is -resistant to chips and scratches.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Comes with 1/4 in Dia x 7/16 in L pin. Polybagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
|
National Hardware Shelf and Rod Bracket, 125 lb Weight, White, Steel
|
National Hardware Shelf and Rod Bracket, 125 lb Weight, 12.74 in L, 9.31 in W, 0.84 in H, White, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6794 is a set of machined hardwood closet pole sockets. They fit the standard 1-3/8 in closet pole. They have a natural finish and can be stained or painted if desired. There are two hardwood sockets and fasteners included in the package.
|
National Hardware DPB103 Pole Socket Set, Dimensions: 1-3/8 in Dia, Wood, Natural, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is -resistant to chips and scratches.
|
Fits up to 1-3/8 in Dia closet pole or 1 in Dia pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy and strong. Made from linden wood. Includes one pair of pole sockets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Pole Socket Set, Steel, Brass, Includes: (2) Socket, Fasteners
|
Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive.
|
Holds up to 500 lb per pair. For 12 in deep shelf.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for shelves 11 to 18 in deep and rods up to 1-3/8 in Dia, this heavy-duty fixed shelf/rod bracket for home closets features a 2-1/2 in hook and holds up to 300 lb per pair. White finish.
|
Sturdy, shelf support and clothes rod hanger is designed for shelves 12 in or larger. Embossed for extra strength. Brackets are punched for #12 wood screws. Adjusts 3/4 in for use with or without hook strip. Holds up to 1-3/8 in Dia rod. Rod mounts on 3 in drop. Includes screws.
|
National Hardware SPB105 Pole Socket Set, Dimensions: 0.38 in D, Steel, Brass, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SP152BC, Stock-pack loose.
|
National Hardware Shelf Bracket, 35 lb Weight, Wall Mounting, 12 in Length, 10 in Width, 10 in Height, Silver, Steel, Zinc-Plated
|
National Hardware 152BC Shelf Bracket, 80 lb Weight, Projection: 5 in, 0.22 in Mounting Hole, 5 in Length, 3-1/2 in Width, 0.94 in Height, 0.1 in Thickness, Steel, Antique Bronze, Includes: Swivel Hook For 360 deg Plant Growth
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware 152BC Shelf Bracket, 80 lb Weight, Projection: 5 in, 0.22 in Mounting Hole, 5 in Length, 3-1/2 in Width, 0.94 in Height, 0.1 in Thickness, Steel, Antique White, Includes: Swivel Hook For 360 deg Plant Growth
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to fit into the fast mount standards and load tested to 150 lb.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is -resistant to chips and scratches.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Knape & Vogt 255-81N Standard Nail, Zinc, Bright, Suitable for: 233 and 255 Series Steel Pilaster Standards
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounts 2 brackets and 1 pole. Caps cover mounting screws. Carded.
|
John Sterling FAST-MOUNT? heavy-duty adjustable shelving system is a fast and economical way to organize your garage, basement and more.
|
Snaps securely into place. For use with #233 and #255. High-strength steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap-in place design. For corner installations. Measures 3/8 in H x 5 in W x 3/4 in D. Steel construction with epoxy-coated finish.
|
Use with SuperSlide? shelving to create uninterrupted sliding action even around corners for walk-in closets.
|
Supports low-profile SuperSlide? shelving in a wall to wall installation. Includes (2) wall brackets, (4) pins and (4) anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Supports front lip of shelving where it meets the side wall. Measures 2 in H x 2.19 in W x 1-3/4 in D. Made from resin.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. Measures 6-1/8 in H x 1-1/4 in W x 4-3/4 in D.
|
Designed for mounting shelves and closet rods in closets, storage rooms. Rod mounts on 3 in drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged.
|
Ideal for shelves 11 to 14 in deep and rods up to 1-3/8 in Dia, this slide adjustable shelf/rod bracket features a durable, scratch-resistant powder-coated finish. Holds up to 500 lb per pair. Hardware included. White finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for shelves 11 to 18 in deep and rods up to 1-3/8 in Dia, this heavy-duty shelf/rod bracket for home closets features a 2-1/2 in hook and holds up to 500 lb per pair. Durable, scratch-resistant white powder-coated finish.
|
National Hardware V2715 Long Hook, 20 lb Weight, Plastic, White, Door Mounting, Includes: (3) Hooks
|
With fold out support for heavy-duty loads. Load tested to 300 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
ClosetMaid? ShelfTrack? standard and bracket system allows our wire shelves to be adjusted to any height, making storage more versatile in both large and small spaces.
|
Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware 110BC Shelf Bracket, 35 lb Weight, Projection: 12 in, Screw Mounting, 7/32 in Mounting Hole, 12 in Length, 14 in Width, 1-15/16 in Height, 0.13 in Thickness, Steel, Zinc, Includes: (12) #7 x 3/4 in and 1-1/4 in Screws
|
Designed for mounting shelves in closets and storage rooms. Brackets are punched for #12 wood screws. Safe working load of 150 lb. Boxed.
|
Adjustable dual track, 1 piece. Dimensions of 1 in W x 25-1/2 in L. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to fit into the fast mount standards and load tested to 150 lb.
|
Use with #129 rubber cushion. For 1/4 in Dia holes x 3/8 in L pin.
|
Use with #129 rubber cushion. For 1/4 in Dia holes x 3/8 in L pin.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preloaded with #8 pin drive and anchors. #6606, 71925 and no 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in D and wardrobe or hanging SuperSlide? shelves 16 in D. No 26607, 71924 and no 21776 for organizer, SuperSlide? (in storage application) and close mesh shelves 16 in D. No 26605 for organizer, wardrobe, SuperSlide? and close mesh shelves 20 in D.
|
ClosetMaid SuperSlide Closet Rod End Cap, Dimensions: 1/2 in L x 1/2 in W x 1/2 in D, Resin
|
Regular-duty adjustable closet rod with a durable, scratch-resistant powder-coat finish fits any closet in your home. The 1 in Dia poles are fabricated from 22 ga steel and extend 18 to 30 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 48 in H x selected length. For use with ProSource shelving. UPC tagged.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
The ProSource shelf support is ideal for shelf support in cabinetry and furniture. Made of steel and zinc. Dimensions: 1/4 in H x 9 in L x 3 in W.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ClosetMaid End Cap, Suitable for: Closet Maid Ventilated Shelving
|
3/4 in thick, for shelves up to 10 in.
|
Horizontal track to hang uprights, load tested to 400 lb per screw on wall studs. Tested to 100 lb per anchor on dry wall mount.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Comes with fold out support for heavy-duty loads. Load tested to 300 lb.
|
Snaps securely into place. For use with #233 and #255. High-strength steel construction.
|
The rods are sized 48 in to 72 in and 72 in to 120 in which includes one-piece central support and the rods sized 96 in to 150 in includes a two-piece central support.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Decko line of bath accessories are simple high quality products that offer a lot but only costs a little. The over the door hanger features a durable chrome finish and is easy to install. The over the door hanger is great for the home, recreational vehicles, the workplace, garage and shop.
|
The ProSource shelf bracket is made from a heavy duty steel construction.
|
SP152BC, Stock-pack loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware 152BC Shelf Bracket, 80 lb Weight, Projection: 8 in, 0.22 in Mounting Hole, 8 in Length, 5-1/2 in Width, 0.94 in Height, 0.1 in Thickness, Steel, Antique Bronze, Includes: Swivel Hook For 360 deg Plant Growth
|
National Hardware 152BC Shelf Bracket, 80 lb Weight, Projection: 8 in, 0.22 in Mounting Hole, 8 in Length, 5-1/2 in Width, 0.94 in Height, 0.1 in Thickness, Steel, Antique White, Includes: Swivel Hook For 360 deg Plant Growth
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Knape & Vogt HEAVYWEIGHT Shelf Bracket, Steel, Platinum
|
For use with ShelfTrack? system. Locks the wire shelf to the vertical wall standard for added safety. Keeps shelves from being pushed up and unlocked accidentally. Works with ventilated shelving. 1/2 in W.
|
Knape & Vogt 255-81N Standard Nail, Zinc, Brass, Suitable for: 233 and 255 Series Steel Pilaster Standards
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 5 mm drilled holes. Use with #129 rubber cushion. Pin measures 4.7 mm Dia x 5/16 in L. Poly pack.
|
Preloaded with #8 pin drive and anchors. #6606, 71925 and no 21775. For Organizer, wardrobe, SuperSlide? and close mesh shelves 12 in D and wardrobe or hanging SuperSlide? shelves 16 in D. No 26607, 71924 and no 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in D. No 26605. For organizer, wardrobe, SuperSlide? and close mesh shelves 20 in D.
|
Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in to 1-5/16 in Dia pole. Includes mounting screws for easy installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in to 1-5/16 in Dia pole. Includes mounting screws for easy installation.
|
Regular-duty adjustable closet rod with a durable, scratch-resistant powder-coat finish fits any closet in your home. The 1 in Dia poles are fabricated from 22 ga steel and extend 30 to 48 in.
|
Ideal for hanging clothes or towels. Fits the top of most standard household doors. 20 in W x 11-3/8 in H x 3 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bright chrome finish valet mounts over door in secs.
|
SP152BC, Stock-pack loose.
|
National Hardware 152BC Shelf Bracket, 100 lb Weight, Projection: 10 in, 0.22 in Mounting Hole, 10 in Length, 7 in Width, 0.94 in Height, 0.1 in Thickness, Steel, Antique Bronze, Includes: Swivel Hook For 360 deg Plant Growth
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware 152BC Shelf Bracket, 100 lb Weight, Projection: 10 in, 0.22 in Mounting Hole, 10 in Length, 7 in Width, 0.94 in Height, 0.1 in Thickness, Steel, Antique White, Includes: Swivel Hook For 360 deg Plant Growth
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
Knape & Vogt HEAVYWEIGHT Shelf Bracket, Steel, Platinum
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preloaded with #8 pin drive and anchors. #6606, 71925 and no 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in D and wardrobe or hanging SuperSlide? shelves 16 in D. No 26607, 71924 and no 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in D. No 26605. For organizer, wardrobe, SuperSlide? and close mesh shelves 20 in D.
|
Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in to 1-5/16 in Dia pole. Includes mounting screws for easy installation.
|
Used to support closet rods. Includes one open and one closed socket. Open socket allows you to install the sockets before inserting a closet rod. Fits 1-1/4 in to 1-5/16 in Dia pole. Includes mounting screws for easy installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The rods are sized 48 in to 72 in and 72 in to 120 in which includes one-piece central support and the rods sized 96 in to 150 in includes a two-piece central support.
|
National Hardware Closet End Cap, Dimensions: 1.81 in L x 0.8 in W, Zinc, Includes: Set Screws
|
Used to hang clothes and other items. Tubes are made with lock seam construction for strength. Ends align for easy installation. Visual-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Shelf Bracket, Wall Mounting, 7 in L, 8 in W, Black, Steel, Includes: Mounting Screw
|
National Hardware 111BC Shelf Bracket, 600 lb Weight, Projection Size: 12 in, Mounting Hole Size: 0.33 in, 11-3/4 in L, 1.19 in W, 0.16 in Thick, White, Steel
|
Comes with fold out support for heavy-duty loads. Load tested to 300 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
Designed for mounting shelves and closet rods in closets, storage rooms. Rod mounts on 3 in drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged.
|
Regular-duty adjustable closet rod with a durable, scratch-resistant powder-coat finish fits any closet in your home. The 1-1/4 in Dia poles are fabricated from 22 ga steel and extend 18 to 30 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular-duty adjustable closet rod with a durable, scratch-resistant powder-coat finish fits any closet in your home. The 1 in Dia poles are fabricated from 22 ga steel and extend 48 to 72 in.
|
Ideal for hanging clothes or towels. Fits the top of most standard household doors. 20 in W x 11-3/8 in H x 3 in D.
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware 111BC Shelf Bracket, 600 lb Weight, Projection Size: 16 in, Mounting Hole Size: 0.33 in, 15-3/4 in L, 1.19 in W, 0.16 in Thick, White, Steel
|
For installation of 82 Series heavy-duty standards. Includes (6) heavy-duty screws and (6) wall anchors.
|
Shelf & rod bracket holds up to 1000 lb per pair. Poles simply snap into place, no screws required. The slide-thru feature lets hangers glide along the pole without obstruction. White finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The rods are sized 48 in to 72 in and 72 in to 120 in which includes one-piece central support and the rods sized 96 in to 150 in includes a two-piece central support.
|
The rods are sized 48 in to 72 in and 72 in to 120 in which includes one-piece central support and the rods sized 96 in to 150 in includes a two-piece central support.
|
Diameter of 1-1/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
Adjustable dual track, 1 piece. Dimensions of 1 in W x 48 in H. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 72 in H x selected length. For use with ProSource shelving. UPC tagged.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
ClosetMaid? ShelfTrack? standard and bracket system allows our wire shelves to be adjusted to any height, making storage more versatile in both large and small spaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Shelf clip attaches to the back of shelving to secure shelf to the wall. Shelf clip locks shelving into place attaching it at the top and bottom of shelf wire.
|
SuperSlide? shelving is ideal for folded clothes, linens and other closet items. With the addition of SuperSlide? closet rod supports and closet rods, it forms a hanging system that allows hangers to slide freely end to end. The hang rod is part of the SuperSlide? system. Snaps into the closet rod support to allow hangers to slide without interruption.
|
Use with SuperSlide? shelving to create uninterrupted sliding action even around corners for walk-in closets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The rods are sized 48 in to 72 in and 72 in to 120 in which includes one-piece central support and the rods sized 96 in to 150 in includes a two-piece central support.
|
Waddell Shelf Bracket, Pine, Natural, Includes: Hardware
|
Wood shelf brackets hold up to 500 lb each. Durable platinum powder-coat finish. Diamond plate stamped surface. Solid steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Knape & Vogt 255-81N Standard Nail, White, Suitable for: 233 and 255 Series Steel Pilaster Standards
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
The rods are sized 48 in to 72 in and 72 in to 120 in which includes one-piece central support and the rods sized 96 in to 150 in includes a two-piece central support.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to hang clothes and other items. Tubes are made with lock seam construction for strength. Ends align for easy installation. Visual-pack.
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
National Hardware 111BC Shelf Bracket, 500 lb Weight, Projection Size: 20 in, Mounting Hole Size: 0.33 in, 19-5/8 in L, 1.19 in W, 0.16 in Thick, White, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Simple Spaces door garment hook is ideal for hanging clothes or towels. It fits the top of most standard household doors. The dimensions are 8-3/4 in W x 9-1/2 in H x 3 in D. It's chrome finished.
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
Supports low-profile SuperSlide? shelving in a wall to wall installation. Includes (2) wall brackets, (4) pins and (4) anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Supports front lip of shelving where it meets the side wall. Measures 2 in H x 2.19 in W x 1-3/4 in D. Made from resin.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Metal construction.
|
Regular-duty adjustable closet rod with a durable, scratch-resistant powder-coated finish fits any closet in your home. The 1-1/4 in Dia poles are fabricated from 22 ga steel and extend 30 to 48 in.
|
Regular-duty adjustable closet rod with a durable, scratch-resistant powder-coated finish fits any closet in your home. The 1-1/4 in Dia poles are fabricated from 22 ga steel and extend 48 to 72 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular-duty adjustable closet rod with a durable, scratch-resistant powder-coat finish fits any closet in your home. The 1 in Dia poles are fabricated from 22 ga steel and extend 72 to 120 in.
|
National Hardware 309BC Closet Rod, Steel, White, 4 ft Length, 1-1/4 in Diameter
|
48 in easy track rail. Attach the track to the studs on the back wall of your closet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Simple Spaces door garment hook is ideal for hanging clothes or towels. It fits the top of most standard household doors. The dimensions are 14 in W x 9-1/2 in H x 3 in D. It has a chrome finish and it's sleeved.
|
Designed for mounting shelves and closet rods in closets, storage rooms. Rod mounts on 3 in drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged.
|
Diameter of 1-1/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to hang clothes and other items. Tubes are made with lock seam construction for strength.
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
Wood shelf brackets hold up to 500 lb each. Durable platinum powder-coat finish. Diamond plate stamped surface. Solid steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
|
The rods are sized 48 in to 72 in and 72 in to 120 in which includes one-piece central support and the rods sized 96 in to 150 in includes a two-piece central support.
|
The rods are sized 48 in to 72 in and 72 in to 120 in which includes one-piece central support and the rods sized 96 in to 150 in includes a two-piece central support.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4 in steel strut and 5 mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3 in or longer 5/16 in pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1200 lb per pair when mounted per manufacturer recommendations. Mounts directly to wall. Less fasteners.
|
Designed for mounting shelves and closet rods in closets, storage rooms. Rod mounts on 3 in drop for easy hanger use. Mount to stud for optimal load capacity. Punched for #12 wood screws. Bulk bagged.
|
Bracket can be folded for quick and easy storage. Safe working load 35 lb. Visual-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable dual track, 1 piece. Dimensions of 1 in W x 70.5 in L. For use with ProSource shelving. UPC tagged.
|
Packed with pegable header, no hardware needed.
|
Diameter of 1-1/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable construction for everyday use. Additional wardrobe rods add versatility to any closet. Rods are easy to rearrange to fit your changing needs. Includes (2) 35 in adjustable rods and (4) ends.
|
The rods are sized 48 in to 72 in and 72 in to 120 in which includes one-piece central support and the rods sized 96 in to 150 in includes a two-piece central support.
|
Fits a 5 mm Dia hole (3/16 in). Has plastic seat with metal peg provides added strength. Metrically sized for most imported cabinet and bookshelves. 15 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear tempered glass 8 in x 12 in semi-circular shelf is supported by decorative satin nickel brackets for a clean, contemporary look to complement your home decor. Holds up to 25 lb, when properly installed. Hardware included.
|
National Hardware 309BC Closet Rod, Steel, White, 6 ft Length, 1-1/4 in Diameter
|
Use in place of support brackets when stacking two or more shelves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to hang clothes and other items. Tubes are made with lock seam construction for strength. Ends align for easy installation. Visual-pack.
|
Used for basic closet storage while adding a decorative touch. Large diameter offer excellent strength and durability. Can be cut to any size using a hacksaw. 1.2 mm thickness. Meets ANSI/BHMA Grade 1 strength.
|
National Hardware 309BC Closet Rod, Steel, White, 8 ft Length, 1-1/4 in Diameter
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For clothes hangers and other hanging accessories. Polybagged.
|
Regular-duty adjustable closet rod with a durable, scratch-resistant powder-coated finish fits any closet in your home. The 1-1/4 in Dia poles are fabricated from 22 ga steel and extend 72 to 120 in.
|
For clothes hangers and other hanging accessories. Polybagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For clothes hangers and other hanging accessories. Polybagged.
|
Durable construction for everyday use. Additional wardrobe rods add versatility to any closet. Rods are easy to rearrange to fit your changing needs. Includes (2) 35 in adjustable rods and (4) ends.
|
Diameter of 3/4 in. Snaps into closet rod support to allow hangers to slide without interruption.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hole 3/8 in deep, 1/2 in metrically sized for most imported cabinets and bookshelves. 20 lb of maximum safe load per peg.
|
Used for basic closet storage while adding a decorative touch. Large diameter offer excellent strength and durability. Can be cut to any size using a hacksaw. 1.2 mm thickness. Meets ANSI/BHMA Grade 1 strength.
|
Keep ties tidy and put them away with ease with this versatile rack. Can be installed on the inside or outside of a vertical panel. Hold up to 20 ties or scarves. Instructions and hardware are included. Chrome hooks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Holds up to 21 belts, slides out for easy access. Can be installed on the inside or outside of a vertical panel. Instructions and hardware are included. Chrome hooks.
|
Provides a temporary place for hanging clothes. Great for limited spaces in closets or the laundry room. Rod slides out of the way when it's not needed. Can be installed on the inside or outside of a vertical panel. Dimension of 1 in H x 1 in W x 14 in D. Hardware is included.
|
ClosetMaid? has a full line of accessories for both inside and outside the closet. These accessories create storage solutions for many places in your home. Easily organize all your shoes with this easy to assemble shoe caddy. The shoe caddy creates vertical shoe storage and expands from 25 to 45 in wide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
A key component of our fixed mount system. Use a 12 in bracket for all 12 in deep shelving and all 16 in deep shelving when used for hanging clothing. Use a 16 in bracket for all 16 in deep storage shelving.
|
Adjustable shelves rest on included pins or can be secured in place. Contains two shelves, can be cut to desired size if needed. Scratch and moisture-resistant surface. Hardware is included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stanley Hardware Closet Rod, Steel, Polished Chrome, 6 ft Length, 1-5/16 in Diameter
|
Stanley Hardware Closet Rod, Steel, Satin Nickel, 6 ft Length, 1-5/16 in Diameter
|
Provides a temporary place for hanging clothes. Great for limited spaces in closets or the laundry room. Rod slides out of the way when it's not needed. Can be installed on the inside or outside of a vertical panel. Dimension of 1 in H x 1 in W x 14 in D. Hardware is included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Floating Shelf Hardware Kit, 50 lb Weight, Screw, Wall Mounting, 11-13/16 in L, 1-1/2 in W, 5-29/32 in H, 3/16 in Thick, Black, Steel, Matte, Includes: (4) Shelf Brackets, (8) Plastic Wall Anchors, (8) #7 x 3/4 in Flat Head Screws and (8) #12 x 1-1/4 in Flat Head Screws
|
Mini-style frequently used in stereo and display cabinets. 1/2 in D support, 1/4 in OD x 3/8 in L peg. 12 lb per peg maximum safe-weight load.
|
Prime-Line Locking Shelf Peg, Plastic, Dimensions: 1/4 in Dia x 2-1/8 in L x 11/16 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prepack shelving with all hardware needed for installation included. Provides extra storage space for any room.
|
For 1-1/4 in Dia closet poles. Also fits up to 1-3/8 in Dia poles. Mounting screws included.
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets. Slim-pak polybagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For clothes hangers and other hanging accessories. Polybagged.
|
For clothes hangers and other hanging accessories. Polybagged.
|
Organization is easier with see-through storage baskets. Basket pulls out to keep everything within easy reach. Glides install between two vertical panels, hardware and instructions are included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hand-selected, finest-quality cedar planks easily installed to add value to home by repelling and resisting cockroaches, silverfish, moths and mildew with a natural, fresh scent. 1/4 in thick x 3-3/4 in W planks. Includes varying lengths of 12 to 48 in.
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
Can be used as hang standard or wall standard. Double notch design for sturdy bracket installation. Install directly to wall studs, concrete or drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For clothes hangers and other hanging accessories. Polybagged.
|
Adjustable shelves rest on included pins or can be secured in place. Contains two shelves, can be cut to desired size if needed. Scratch and moisture-resistant surface. Hardware is included.
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg and second measurement denotes nominal length of wall leg. Bulk pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg, second measurement denotes nominal length of wall leg. Bulk pack.
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg and second measurement denotes nominal length of wall leg. Bulk pack.
|
The economical way to organize your closets. Ventilated shelving allows for air circulation and room for clothes to breathe. Stacked sweaters become neatly stored and easily accessible. Wasted space is fully utilized. Get it together today, with a fixed-mount storage system from ClosetMaid?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 4-shelf unit can be used to organize playrooms, laundry areas, basements and garage areas. Shelves are versatile and offer solid-surfaces that are great for organizing and storing containers that hold liquid, mudroom footwear, dry food and small tools. The shelving unit can be assembled quickly, without the need for tools.
|
For 1-1/4 in Dia closet poles. Also fits up to 1-3/8 in Dia poles. Mounting screws included.
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets. Slim-pak polybagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
Knape & Vogt Shelf Standard, Heavy-Duty, Galvanized, 24 in Length, 1-1/4 in Width
|
Preloaded with #8 pin drive and anchors. #6606, 71925 and no 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in D and wardrobe or hanging SuperSlide? shelves 16 in D. No 26607, 71924 and 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in D. No 26605 for organizer, wardrobe, SuperSlide? and close mesh shelves 20 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Organization is easier with see-through storage baskets. Basket pulls out to keep everything within easy reach. Glides install between two vertical panels, hardware and instructions are included.
|
Adjustable shelves rest on included pins or can be secured in place. Contains two shelves, can be cut to desired size if needed. Scratch and moisture-resistant surface. Hardware is included.
|
Add this four-tier wire rack to the inside of cabinet doors or directly to walls for extra storage space. Store spices and other small containers in kitchen or pantry. Store small items in garage or laundry room.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stanley Hardware Closet Rod, Steel, Polished Chrome, 8 ft Length, 1-5/16 in Diameter
|
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg and second measurement denotes nominal length of wall leg. Bulk pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg and second measurement denotes nominal length of wall leg. Bulk pack.
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg and second measurement denotes nominal length of wall leg. Bulk pack.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
ClosetMaid Rolling Cart, 17.63 in Shelf Width, Steel Handle, 17.63 in Overall Width, 34.9 in Overall Height, Includes: Casters
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Snaps securely into place. For use with #233 and #255. High-strength steel construction.
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
The ProSource shelf bracket is made from a powder-coated steel construction.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
|
|
