Home > PLUMBING > ROUGH PLUMBING SUPPLIES > TUBING
Choose a sub category:
POLYETHYLENE TUBING PEX TUBING FLAIR IT TUBING
VINYL TUBING RUBBER TUBING
Sort By:
1
PIPE PEX-B 1/2IN X 2FT PIPE PEX-B 1/2IN X 2FT PIPE PEX-B 1/2IN X 2FT
PIPE PEX-B 1/2IN X 2FT
Our Price: $2.79
PIPE PEX-B 1/2IN X 2FT
Our Price: $2.79
PIPE PEX-B 1/2IN X 2FT
Our Price: $2.79
PIPE PEX A 1/2IN X 5FT WHITE PIPE PEX STICK WHT 1/4IN X 5FT Conbraco APPW512 Apollo
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Apollo Pipe, Nominal Size: 1/4 in, 5 ft L, Barb Connection, 160 psi, Temperature Rating: 200 deg F, Polyethylene, White Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX-B 1/2IN X 5FT PIPE PEX-B 1/2IN X 5FT TUBE PEX WHITE 1/2IN 5FT STICK
PIPE PEX-B 1/2IN X 5FT
Our Price: $3.49
PIPE PEX-B 1/2IN X 5FT
Our Price: $3.49
Cash Acme Pipe, Nominal Size: 1/2 in, 5 ft L, PEX Connection, 80 psi, White
PIPE PEX-B 3/8IN X 10FT Conbraco APPW534 Apollo Conbraco APPW1012 Apollo
PIPE PEX-B 3/8IN X 10FT
Our Price: $3.99
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX-B 3/4IN X 5FT PIPE PEX-B 3/4IN X 5FT Flair-It 16051 Flexpex
PIPE PEX-B 3/4IN X 5FT
Our Price: $4.59
PIPE PEX-B 3/4IN X 5FT
Our Price: $4.59
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With white markings. Bar coded.
Flair-It 16050 Flexpex Pex Tubing PIPE PEX-B 3/4IN X 2FT PIPE PEX-B 3/4IN X 2FT
PIPE PEX-B 3/4IN X 2FT
Our Price: $4.99
PIPE PEX-B 3/4IN X 2FT
Our Price: $4.99
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded.
PIPE PEX-B 3/4IN X 2FT PIPE PEX 3/4IN X 5FT WHITE Conbraco APPW51 Apollo
PIPE PEX-B 3/4IN X 2FT
Our Price: $4.99
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
U860W20 Straight Pex Tubing Without Oxygen Barrier Flair-It 16052 Flexpex Pex Tubing Conbraco APPB2012 Apollo
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPR2012 Apollo Conbraco APPW1034 Apollo PEX-A TUBING WHITE 1/2INX20FT
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance.
PEX-A TUBING BLUE 1/2IN X 20FT PEX-A TUBING RED 1/2IN X 20FT PIPE PEX 1IN X 5FT WHITE
Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance. Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
PlumbPak PP855-21 Tubing PIPE PEX WHITE 1INX10FT Conbraco APPB2034 Apollo
1/4 in x 25 ft poly tubing. PEX tubing is cross-linked, high-density polyethylene. The silane method, also called the moisture cure method, results in PEX-B. In this method, cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyl trimethoxy silane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPR2034 Apollo PIPE PEX COIL WHT 3/4IN X 25FT Abbott Rubber 9001P-200 Lightweight Non-Toxic Tubing
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX tubing is cross-linked, high-density polyethylene and is available for potable water distribution systems in red, white and blue colors for easy identification of hot, cold and main water lines. Apollo PEX can be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine resistance. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture.
PEX-A TUBING WHITE 3/4INX20FT PEX-A TUBING BLUE 3/4IN X 20FT PEX-A TUBING RED 3/4IN X 20FT
Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance. Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance. Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance.
Spartan 20010 Lightweight Flexible Pipe Abbott Rubber 7101P/PSVTR32-200 Lightweight Tubing Spartan 20020 Lightweight Flexible Pipe
Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less.
PEX-A TUBING WHITE 1IN X 20FT Cresline 18205 Flexible Pipe Conbraco APPB10012 Apollo
Expansion PEX tubing is cross-linked, high-density polyethylene. It's available in white, red or blue colors for easy identification of hot and cold water lines. The Apollo Expansion PEX tubing listed is type PEX-A (PEX-a, PEXa). PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine-resistance. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPR10012 Apollo Conbraco APPW10012 Apollo Cresline 18335 Flexible Pipe
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
Conbraco APPW538 Apollo PIPE POLY 160LB 1/2IN X 100FT CONNECTION U860B100 1/2IN X 10
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. SharkBite PEX tubing is a cross-linked polyethylene pipe for a range of residential and commercial plumbing applications. This pipe is approved for all potable water systems and is also available in red and white colors. SharkBite PEX is approved for crimp, clamp or push-to-connect plumbing systems. The pipe comes with a repeating SharkBite imprinted pattern which serves as a visual aid to determine if the tube has been inserted correctly into SharkBite push-to-connect fittings. This feature only works if the tubing is cut between the SharkBite imprint pattern.
TUBING POLY CE BLU CTS 3/4X100 PIPE PEX A 1/2IN X 100FT RED PIPE PEX A 1/2IN X 100FT BLUE
For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
Cresline 18515 Flexible Tubing PIPE PEX A 1/2IN X 100FT WHITE Sharkbite APPB2012 Straight Pex Tubing
For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
APPR2012 Straight Pex Tubing Abbott Rubber 9002P Lightweight Non-Toxic Tubing Cresline 18105 Flexible Pipe
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Abbott Rubber 7001P Lightweight Tubing PEXTUBE BLUE COIL 3/4X100FT Knape & Vogt PK255 BR 72 Standard Pilaster
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. SharkBite? PEX pipe is a cross-linked polyethylene pipe for use in a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems and with an oxygen barrier for radiant floor and hydronic heating applications. A repeating SharkBite? imprint pattern provides a visual aid to determine if the pipe has been inserted all the way into the SharkBite? push-to-connect fitting. This feature only works if the pipe is cut between the SharkBite? imprint pattern. SharkBite? PEX pipe is a cross-linked polyethylene pipe for use in a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems and with an oxygen barrier for radiant floor and hydronic heating applications. A repeating SharkBite? imprint pattern provides a visual aid to determine if the pipe has been inserted all the way into the SharkBite? push-to-connect fitting. This feature only works if the pipe is cut between the SharkBite? imprint pattern.
Cresline 18215 Flexible Pipe Cresline 18005 Flexible Pipe PIPE FLEXIBLE BLUE 3/4INX100FT
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Cresline CE Blue ? polyethylene flexible pipe is produced using virgin PE 4710 high-density polyethylene (HDPE) to meet or exceed ASTM D2239 and ASTM 2737 standards and is NSF-approved for drinking water use. CE Blue ? is blue in color and is available in both iron pipe size (IPS) and copper tube size (CTS). Unique and functional footage markings help you get the most out of every purchase.
Cresline 18355 Flexible Pipe Conbraco APPB10034 Apollo Conbraco APPR10034 Apollo
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPW10034 Apollo Abbott Rubber 7002P/PSVTR52-100 Lightweight Tubing TUBING POLY SIDR-7 HD 3/4X100
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Cresline 18535 Flexible Tubing TUBING POLY CE BLUE CTS 1X100 Cresline 18115 Flexible Pipe
For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901. For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Abbott Rubber 9003P/PSPTR6-100 Lightweight Non-Toxic Tubing Abbott Rubber 7003P/PSVTR68-100 Lightweight Tubing Spartan 20040 Lightweight Flexible Pipe
For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less.
Cresline 18015 Flexible Pipe PIPE PEX A 3/4IN X 100FT WHITE PIPE FLEXIBLE BLUE 1IN X 100FT
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Cresline CE Blue ? polyethylene flexible pipe is produced using virgin PE 4710 high-density polyethylene (HDPE) to meet or exceed ASTM D2239 and ASTM 2737 standards and is NSF-approved for drinking water use. CE Blue ? is blue in color and is available in both iron pipe size (IPS) and copper tube size (CTS). Unique and functional footage markings help you get the most out of every purchase.
PIPE PEX A 3/4IN X 100FT RED Spartan 20015 Lightweight Flexible Pipe PIPE PEXA 3/4IN X 100FT BLUE
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is Red in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
Cresline 18225 Flexible Pipe Abbott Rubber 7004P/PSVTR75-100 Lightweight Tubing Cresline 18375 Flexible Pipe
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Abbott Rubber 9004P Lightweight Non-Toxic Tubing Abbott Rubber 7005P/PSVTR86-100 Lightweight Tubing Abbott Rubber RVEB Non-Toxic Tubing
For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps.
Abbott Rubber RVIG Non-Toxic Tubing Flair-It 16062 Flexpex Pex Tubing Conbraco APPW1001 Apollo
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Abbott Rubber RVDC Non-Toxic Tubing Spartan 21050 Lightweight Flexible Pipe Abbott Rubber RVBIG Non-Toxic Tubing
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. General-purpose-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Flair-It 16063 Flexpex Pex Tubing CONBRACO APPR30012 CONBRACO APPB30012
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX 1/2INCHX300FOOT WHITE PIPE POLY 160LB 1/2IN X 400FT Sharkbite U870B10 Straight Pex Tubing Without Oxygen Barrier
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
U870R10 Straight Pex Tubing Without Oxygen Barrier Conbraco APPB1001 Apollo Conbraco APPR1001 Apollo
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Cresline 18125 Flexible Pipe TUBING POLY SIDR-7 HD 1X100FT Abbott Rubber RVJG Non-Toxic Tubing
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Clear PVC tubing manufactured with non-toxic FDA compounds. Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. Excellent resistance to mild acids and chemicals. See through design allows for visual flow. Not for use with ice makers or petroleum-based products.
Cresline 18340 Flexible Pipe Spartan 20035 Lightweight Flexible Pipe PIPE PEX A 1/2IN X 300FT WHITE
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
Abbott Rubber 7006P/PSVTR108-10 Lightweight Tubing Spartan 21060 Lightweight Flexible Pipe Abbott Rubber RVKI Non-Toxic Tubing
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps.
Abbott Rubber RVBKI Non-Toxic Tubing Abbott Rubber 7044P/PSVTR85-100 Lightweight Tubing Abbott Rubber A14000TB Piliable Air Hose
General-purpose-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Lightweight construction, suitable for air, water and spray applications, contractor-grade, for use with hose barbs and clamps.
Conbraco APPOB10034 Apollo PIPE POLY 125LB 3/4IN X 400FT Abbott Rubber 7045P/PSVTR69-100 Lightweight Tubing
Oxygen Barrier PEX tubing has been designed to prevent diffusion of oxygen into hydronic radiant heating systems. A layer of polymer is laminated to the outside surface which is highly resistant to the passage of oxygen. Oxygen Barrier PEX tubing is good for hydronic radiant heating, cooling and snow melting systems using water or water/glycol mix. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Oxygen barrier PEX tubing may also be used as transfer lines for baseboard heating systems with a maximum operating temperature of 200 deg F at 100 psi. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Cresline 18220 Flexible Pipe Abbott Rubber 9005P/PSPTR10-50 Lightweight Non-Toxic Tubing Abbott Rubber RVLI Non-Toxic Tubing
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. Clear PVC tubing manufactured with non-toxic FDA compounds. Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. Excellent resistance to mild acids and chemicals. See through design allows for visual flow. Not for use with ice makers or petroleum-based products.
Abbott Rubber RBBP Flexible Bilge Sump Hose Abbott Rubber RPBEB Tubing Cresline 18135 Flexible Pipe
Crushproof, suitable for marine and low-pressure discharge, abrasion- and kink-resistant, no fittings necessary. Suitable for use with air and water lines. Use as pneumatic control line. For use with compression style fittings. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Abbott Rubber RBBO Flexible Bilge Discharge Hose PIPE PEX 1/2INCHX500FOOT BLUE PIPE PEX 1/2INCHX500FOOT WHITE
Crushproof, suitable for marine and low-pressure discharge, abrasion- and kink-resistant, no fittings necessary. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX A 1/2IN X 300FT BLUE PIPE PEX A 1/2IN X 300FT RED Cresline 18110 Flexible Pipe
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Flair-It 16064 Flexpex Abbott Rubber RVHF Non-Toxic Tubing Abbott Rubber RPIG Lightweight Non-Toxic Tubing
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. FDA-grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings.
Abbott Rubber RPEB Lightweight Non-Toxic Tubing Abbott Rubber 7013P Lightweight Tubing Abbott Rubber A38000TB Piliable Air Hose
FDA Grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Lightweight construction, suitable for air, water and spray applications, contractor-grade, for use with hose barbs and clamps.
PIPE PEX 1/2INCH X 500FOOT RED PIPE PEX A 1IN X 100FT WHITE Abbott Rubber 7010P/PSVTR1612-5 Lightweight Tubing
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Abbott Rubber RVLK Non-Toxic Tubing Abbott Rubber RPFD Lightweight Non-Toxic Tubing Abbott Rubber 10011P Braided Hose
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. FDA-grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings. FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps.
Conbraco APPOB30012 Apollo Abbott Rubber RVGE Non-Toxic Tubing Cresline 18120 Flexible Pipe
Oxygen Barrier PEX tubing has been designed to prevent diffusion of oxygen into hydronic radiant heating systems. A layer of polymer is laminated to the outside surface which is highly resistant to the passage of oxygen. Oxygen Barrier PEX tubing is good for hydronic radiant heating, cooling and snow melting systems using water or water/glycol mix. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Oxygen barrier PEX tubing may also be used as transfer lines for baseboard heating systems with a maximum operating temperature of 200 deg F at 100 psi. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Conbraco APPR30034 Abbott Rubber RVFD Non-Toxic Tubing Conbraco APPB30034
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX 3/4INCHX300FOOT WHITE U870W20 Straight Pex Tubing Without Oxygen Barrier Cresline 18360 Flexible Pipe
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Spartan 20045 Lightweight Flexible Pipe Abbott Rubber RVMK Non-Toxic Tubing Abbott Rubber RPGE Lightweight Non-Toxic Tubing
Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. Abbott Rubber Tubing, Nominal Size: 5/8 in, 7/8 in Dia Outside, 40 psi, Operating Temperature: 70 deg F, PVC, Clear, 100 ft L FDA Grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings.
Cresline 18010 Flexible Pipe Abbott Rubber A12000TB Piliable Air Hose TUBING POLY CE BLU CTS 3/4X500
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Lightweight construction, suitable for air, water and spray applications, contractor-grade, for use with hose barbs and clamps. For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901.
TUBING POLY CE BLUE CTS 1X300 PIPE FLEXIBLE BLUE 3/4INX400FT Abbott Rubber RLGE Latex Tubing Hose
For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901. Cresline CE Blue ? polyethylene flexible pipe is produced using virgin PE 4710 high-density polyethylene (HDPE) to meet or exceed ASTM D2239 and ASTM 2737 standards and is NSF-approved for drinking water use. CE Blue ? is blue in color and is available in both iron pipe size (IPS) and copper tube size (CTS). Unique and functional footage markings help you get the most out of every purchase. Elastic construction allows for use in a variety of applications, smooth interior and exterior, flexible in low temperatures.
Cresline 18380 Flexible Pipe Spartan 21055 Lightweight Flexible Pipe Abbott Rubber RBBR Flexible Bilge Discharge Hose
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. Crushproof, suitable for marine and low-pressure discharge, abrasion- and kink-resistant, no fittings necessary.
Abbott Rubber RAKG Air Hose Abbott Rubber RHLK Lightweight Heater Hose Abbott Rubber RCDR Flat Discharge Hose
Watts Air Hose, 3/8 in Dia Inside, 5/8 in Dia Outside, PVC, Red, 150 ft L, Temperature Rating: -50 to 175 deg F, Suitable for: Hose Barb Fittings and Clamps Heat, ozone and weather-resistant, suitable for use as dishwasher and washing machine drain, flexible design, not for under-hood applications. Layflat construction, suitable for open end low-pressure discharge, non-reinforced, extremely lightweight.
Abbott Rubber RPSP Pool and Spa Vacuum Hose Abbott Rubber RVNL Non-Toxic Tubing Cresline 18020 Flexible Pipe
Crushproof, suitable for use with pool vacuums. Abrasion- and kink-resistant. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Abbott Rubber 7011P/PSVTR1620-5 Lightweight Tubing Abbott Rubber 7007P/PSVTR128-10 Lightweight Tubing Cresline 18145 Flexible Pipe
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Abbott Rubber 7112P Lightweight Tubing Abbott Rubber 10033P Braided Hose PIPE PEX A 3/4IN X 300FT WHITE
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
PIPE FLEXIBLE BLUE 1IN X 300FT Abbott Rubber RCSV Flexible Suction Hose Cresline 18230 Flexible Pipe
Cresline CE Blue ? polyethylene flexible pipe is produced using virgin PE 4710 high-density polyethylene (HDPE) to meet or exceed ASTM D2239 and ASTM 2737 standards and is NSF-approved for drinking water use. CE Blue ? is blue in color and is available in both iron pipe size (IPS) and copper tube size (CTS). Unique and functional footage markings help you get the most out of every purchase. Wihte spiral helix, suitable for use with centrifugal and trash pumps, contractor grade, convenient see-through design. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Spartan 21065 Lightweight Flexible Pipe Abbott Rubber RHNL Lightweight Heater Hose Abbott Rubber RPSR Pool and Spa Vacuum Hose
Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. Heat, ozone and weather-resistant, suitable for use as dishwasher and washing machine drain, flexible design, not for under-hood applications. Crushproof, suitable for use with pool vacuums. Abrasion- and kink-resistant.
Abbott Rubber 10066P Braided Hose TUBING POLY SIDR-7 HD 3/4X400 PIPE PEX A 3/4IN X 300FT BLUE
FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
PIPE PEXA 3/4IN X 300FT RED Abbott Rubber RALI Air Hose Abbott Rubber 7009P Lightweight Tubing
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Light weight construction, suitable for air, water, and spray applications, contractor grade, for use with hose barbs and clamps. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Abbott Rubber RAIE Air Hose Abbott Rubber RCDV Flat Discharge Hose PIPE PEX 3/4INCHX500FOOT BLUE
Abbott Rubber Contractor Grade Air Hose, 1/4 in Dia Inside, 1/2 in Dia Outside, PVC/Polyester, Red, 200 ft L, Temperature Rating: 175 deg F Layflat construction. Suitable for open end low-pressure discharge. Non-reinforced, extremely lightweight. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX 3/4INCH X 500FOOT RED PIPE PEX 3/4INCHX500FOOT WHITE PIPE PEX WHITE 1INX300FT
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PEX tubing is cross-linked, high-density polyethylene. The silane method, also called the moisture cure method, results in PEX-B. In this method, cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyl trimethoxy silane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Abbott Rubber RBVLI Braided Non-Toxic Tubing Conbraco APPOB30034 Apollo Cresline 18130 Flexible Pipe
FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps. Oxygen Barrier PEX tubing has been designed to prevent diffusion of oxygen into hydronic radiant heating systems. A layer of polymer is laminated to the outside surface which is highly resistant to the passage of oxygen. Oxygen Barrier PEX tubing is good for hydronic radiant heating, cooling and snow melting systems using water or water/glycol mix. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Oxygen barrier PEX tubing may also be used as transfer lines for baseboard heating systems with a maximum operating temperature of 200 deg F at 100 psi. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Abbott Rubber RBVMK Braided Non-Toxic Tubing TUBING POLY SIDR-7 HD 1X300FT Abbott Rubber RBVKG Braided Non-Toxic Tubing
Clear PVC tubing reinforced with spiral polyester for use in pressure applications. Manufactured with non-toxic FDA compounds. Use for flexible lines for air, water, liquids, beverages and gases as well as drain lines for air conditioners and dehumidifiers where higher pressure or tubing wall stability is required. Excellent resistance to mild acids and chemicals. See through design allows for visual flow. Not for use with ice makers or petroleum based products. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps.
Abbott Rubber RSFN Spiral Helix Flex Hose Abbott Rubber RVSP Non-Toxic Tubing Abbott Rubber 10044P Braided Hose
White non-toxic PVC flexible spa hose designed for use with PVC SCH 40 fittings. For spas, jetted hot tubs and pools. Can also be used for water suction and transfer applications. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps.
Abbott Rubber RBVNL Braided Non-Toxic Tubing Abbott Rubber RBVIE Braided Non-Toxic Tubing Abbott Rubber RBVQN Braided Non-Toxic Tubing
FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps. Clear PVC tubing reinforced with spiral polyester for use in pressure applications. Manufactured with non-toxic FDA compounds. Use for flexible lines for air, water, liquids, beverages and gases as well as drain lines for air conditioners and dehumidifiers where higher pressure or tubing wall stability is required. Excellent resistance to mild acids and chemicals. See through design allows for visual flow. Not for use with ice makers or petroleum-based products. FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps.
Abbott Rubber 10077P Braided Hose Abbott Rubber 10055P Braided Hose Abbott Rubber RSFR Spiral Helix Flex Hose
FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps. FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps. cUSPC/IAPMO certified. Suitable for use with spas, hot tubs and whirlpools, flexible design. For use with PVC SCH 40 fittings.
Abbott Rubber RVUR Non-Toxic Tubing Abbott Rubber RVPN Non-Toxic Tubing PIPE PEX WHITE 1INX500FT
Clear PVC tubing manufactured with non-toxic FDA compounds. Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. Excellent resistance to mild acids and chemicals. See through design allows for visual flow. Not for use with ice makers or petroleum-based products. Clear PVC tubing manufactured with non-toxic FDA compounds. Can be used for flexible lines for low-pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. Excellent resistance to mild acids and chemicals. See through design allows for visual flow. Not for use with ice makers or petroleum based products. PEX tubing is cross-linked, high-density polyethylene. The silane method, also called the moisture cure method, results in PEX-B. In this method, cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyl trimethoxy silane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX A 1IN X 300FT WHITE Abbott Rubber RSFP Spiral Helix Flex Hose Abbott Rubber RSFL Spiral Helix Flex Hose
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. cUSPC/IAPMO certified, suitable for use with spas, hot tubs and whirlpools, flexible design. For use with PVC SCH 40 fittings. cUSPC/IAPMO certified. Suitable for use with spas, hot tubs and whirlpools, flexible design. For use with PVC SCH 40 fittings.
Abbott Rubber RUTOL Lightweight Utility Hose Abbott Rubber RBVTP Braided Non-Toxic Tubing Abbott Rubber RBVVR Braided Non-Toxic Tubing
Heat, ozone and weather-resistant, suitable for use with air, water and ag spray, contractor-grade, limited oil resistance. FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps. FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps.
   
 
1