|
|
|
|
|
|
|
|
|
|
|
|
|
|
Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one-side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 to 0.030 in.
|
Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 to 0.030 in.
|
Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 to 0.030 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VP Bar and Chain Oil is formulated for great performance within a broader temperature range than other brands. The high-tack formula affords all-season performance in cold and hot temperatures and has up to 136% higher viscosity at bar operating temperature.
|
Depth gauge setting being a major factor affecting any saw chain's level of safety and performance, this depth gauge filing kit including 0.025 in drop center depth gauge tool and flat file helps the setting easily.
|
Heavy-duty, long-life stones to fit the electric Sure Sharp (sku # 623.1112).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty, long-life stones to fit the electric Sure Sharp (sku # 623.1112).
|
Heavy-duty, long-life stones to fit the electric Sure Sharp (sku # 623.1112).
|
Premium files made with the finest steel using state-of-the-art production and finishing processes for excellent hand sharpening results on your saw chain.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For falling (not for splitting wood). Helps to control direction of tree fall. Prevents saw from binding in cut.
|
Premium files made with the finest steel using state-of-the-art production and finishing processes for excellent hand sharpening results on your saw chain.
|
Preloaded see-through gun delivers high-quality grease in measured amounts. Prolongs life of bar and cutting chain, improves cutting performance. The simplest, most effective way to grease chainsaw bar nose bearings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Oregon R34 AdvanceCut? saw chain offers higher chain efficiency making it an ideal choice for landscapers and homeowners who use small, low powered saws. The 0.043 in ga narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems.
|
Premium files made with the finest steel using state-of-the-art production and finishing processes for excellent hand sharpening results on your saw chain.
|
Assembled 7/32 in file guide including one round file and one wooden handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Assembled 5/32 in file guide including one round file and one wooden handle.
|
Assembled 3/16 in file guide including one round file and one wooden handle.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chainsaw bar lubricant with no sling additive.
|
Makita? 10 in saw chain is ideal for professional, commercial or occasional users. This versatile saw chain is durable and designed for efficient cutting. It is ideal for use with the Makita 18 V LXT? brushless cordless 10 in top handle chain saw, model XCU06.
|
File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 in to 0.030 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched bumber drive link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
Semi chisel chain features top performing chamfer chisel cutters and a notched bumberdrive link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, western Auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
The Oregon R40 AdvanceCut? saw chain is a 10 in, 3/8 in pitch chain that is ideal for landscapers and homeowners using small, low powered saws. The 0.043 in ga narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems.
|
This durable pole saw chain is designed to fit 8 in bars on our cordless 20 V max pole saw (DCPS620). The low vibration chain is designed to cut smooth and fast with minimum kickback.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Oregon R44 AdvanceCut? saw chain is ideal for landscapers and homeowners using small, low powered saws, because it offers higher chain efficiency. The 0.043 in ga narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched bumberdrive link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low-profile 3/8 in pitch chain. Also features four way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western Auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched bumberdrive link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low-profile 3/8 in pitch chain. Also features four way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western Auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched bumberdrive link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low-profile 3/8 in pitch chain. Also features four way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western Auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
The Oregon R45 AdvanceCut? saw chain is a 12, 3/8 in pitch chain that is ideal for landscapers and homeowners using small, low powered saws. The 0.043 in ga narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get your smallest jobs done just right. Oregon 25AP is lightweight, smooth chain, ideal for pruning. An easy to use and maneuver chain. Our Micro Chisel? cutters have small-radius working corners for excellent performance and they are easy to maintain.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched bumberdrive link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low-profile 3/8 in pitch chain. Also features four way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western Auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched bumberdrive link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low-profile 3/8 in pitch chain. Also features four way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western Auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
The Oregon T44 VersaCut? saw chain is ideal for arborists and orchardists who use lightweight saws but need professional-level performance. Longer cutter top-plates offer longer cutting life. The low-vibration, semi-chisel cutters provide an aggressive cutting edge with a forgiving sharpening profile. This chain fits saws from Echo?, McCulloch?, Poulan? and Stihl?.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
The Oregon R50 AdvanceCut? saw chain offers higher chain efficiency making it an ideal choice for landscapers and homeowners who use small, low powered saws. The 0.043 in ga narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems. This 14, 3/8 in pitch chain fits several Stihl? saws including 017, 019, MS 170, 018 and MS 191T.
|
The Oregon R52 AdvanceCut? saw chain is ideal for landscapers and homeowners using small, low powered saws, because it offers higher chain efficiency. The 0.043 in ga narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems. This chain fits saws from several manufacturers including Husqvarna?, Echo?, Poulan? and Ryobi?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 12 in replacement saw chain is designed for durability. It fits 12 in bars on our 20 V MAX* cordless chainsaw (DCCS620). This low-vibration chain is designed to cut smooth and fast with minimum kickback.
|
The H72 18 in ControlCut? saw chain is an ideal choice for occasional chainsaw users including property owners and commercial cutters. This 0.050 in ga, 0.325 in pitch chain features low-vibration, Micro Chisel? cutters with small radius working corners for excellent performance and easy maintenance.
|
The Oregon R55 AdvanceCut? saw chain is an ideal choice for landscapers and homeowners who use small, low powered saws to cut trees and limbs to maintain their properties. AdvanceCut? saw chain is durable, easy-to maintain and has a forgiving cutting performance. The low vibration design gives you greater control, minimizes fatigue and reduces kickback for increased safety. The 0.043 in gauge narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems. This 14 in, 3/8 in pitch chain fits several Stihl? saws including 017, 019, MS 170, 018 and MS 191T.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Oregon T50 VersaCut? saw chain is a high-performance 3/8 in Low-Profile? chain for arborists and orchardists who use lightweight saws. Longer cutter top-plates offer longer cutting life. The low-vibration, semi-chisel cutters provide an aggressive cutting edge with a forgiving sharpening profile. This chain fits several saws including Stihl? 009, 010, 011, 012 and 015.
|
The ideal 14 in chainsaw chain for arborists and orchardists. This 3/8 in low-profile chain gives your saw lightweight saw the level of performance a professional needs to get the job done.
|
Oregon 90PX chain offers higher chain efficiency, ideal for small, low powered saws great for landscapers and homeowners. The 0.043 in ga narrow kerf cutting systems increase efficiency. They need less power from the saw than standard cutting systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Oregon T55 VersaCut? saw chain is ideal for arborists and orchardists who use lightweight saws but need professional-level performance. This Low-Profile? chain features longer cutter top-plates for extended cutting life. The low-vibration, semi-chisel cutters provide an aggressive cutting edge with a forgiving sharpening profile.
|
The ideal 16 in chainsaw chain for arborists and orchardists. This 3/8 in low-profile chain gives your saw lightweight saw the level of performance a professional needs to get the job done.
|
The Oregon T57 VersaCut? saw chain is ideal for arborists and orchardists who use lightweight saws but need professional-level performance. Longer cutter top-plates offer longer cutting life. The low-vibration, semi-chisel cutters provide an aggressive cutting edge with a forgiving sharpening profile. This chain fits saws from several manufacturers including Echo?, Craftsman?, Homelite? and Remington?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This water-resistant 8 in pole saw bar is designed for ultimate durability. It fits 8 in chains on our cordless 20V MAX* pole saw (DCPS620). This bar is designed to cut smooth and fast with minimum kickback.
|
Our durable 16 in replacement caw chain is designed to fit 16 in bars on the DEWALT? 60 V MAX cordless chainsaw (DCCS670). This low-vibration chain is designed to cut smooth and fast with minimum kickback.
|
The Oregon T62 VersaCut? saw chain is a high-performance 3/8 in Low-Profile? chain for arborists and orchardists who use lightweight saws. Longer cutter top-plates offer longer cutting life. The low-vibration, semi-chisel cutters provide an aggressive cutting edge with a forgiving sharpening profile. This 18 in, 0.05 in ga chain fits several saws including Husqvarna? 136, 137, 141, 142 and 235 E.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The S63 AdvanceCut? saw chain is a low-vibration, low-kickback chain designed for homeowners and occasional chainsaw users. This 18 in chain features chamfer chisel cutter's with twin cutting corners that offer outstanding performance. These cutters are durable, easy to maintain and forgiving.
|
The Oregon M66 SpeedCut? saw chain is a top performing chain for arborists and property owners. This 16 in, 0.325 in pitch chain is more efficient since it needs less power from the saw. Low vibration, Micro-Chisel cutters offer excellent performance and easy maintenance.
|
The L67 16 in ControlCut? saw chain is an ideal choice for occasional chainsaw users including property owners and commercial cutters. This 0.063 in ga, 0.325 in pitch chain features low vibration, micro Chisel? cutters with small radius working corners for excellent performance and easy maintenance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The D60 AdvanceCut? saw chain is the ideal low kickback chain for occasional and commercial chainsaw users. The low vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge.
|
The D66 AdvanceCut? saw chain is a low kickback chain that is ideal for occasional and commercial chainsaw users. The low vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge.
|
The D59 AdvanceCut? saw chain is the ideal low kickback chain for occasional and commercial chainsaw users. The low vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Craftsman, Homelite, Poulan and Poulan Pro. Value pack contains 2 saw chains.
|
The Oregon E60 PowerCut? saw chain is a low-vibration, 3/8 in pitch chain that is ideal for professional woodcutters. The full chisel cutters offer top performance to the most demanding of users. The offset depth gauge design offers a smoother cut. This chain fits several saws including Husqvarna? 455 Rancher, 460, 465 and 55 Rancher.
|
An ideal choice for occasional users like property owners and commercial cutters. The low-vibration, micro chisel cutters that have small radius working corners for excellent performance and easy maintenance. Oregon 21BPX chain, low kickback design.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for occasional chainsaw users including property owners and commercial cutters, the L62 ControlCut? saw chain features low-vibration Micro Chisel? cutters with small-radius working corners for excellent performance and easy maintenance. This 0.063 in gauge, 0.325 in pitch chain has a low kickback design.
|
The Makita? 10 in guide bar is designed for use with low-profile chains to increase cutting efficiency. The slim contour provides less weight and increased maneuverability. The small radius sprocket nose reduces the potential for kickback compared to standard-size noses. It is ideal for use with the Makita? 10 in pole saw couple shaft attachment and 25.4 cc MM4 4-stroke engine telescoping pole pruner.
|
The Milwaukee? 16 in saw chain is to be used with the Milwaukee? M18 FUEL? 16 in chainsaw (2727-20). The design delivers fast cuts with low vibration and minimal kickback. The chain features a durable design and is weather -resistant for increased life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 10 in saw chain is to be used with our M18 FUEL? 10 in pole saw with QUIK-LOK? (2825-21PS) and M18 FUEL? QUIK-LOK? 10 in pole saw attachment (49-16-2720). The replacement saw chain design gives you fast cuts with low vibration and minimum kickback. The chain features a durable design and is weather -resistant for increased life.
|
Our 6 in saw chain is for use with the Milwaukee? M12 FUEL? HATCHET? 6 in pruning saw (2527-20). The full house chain features a cutter on every drive link, which minimizes vibration and delivers clean cuts. The design also delivers fast cuts and minimizes kickback to meet the ANSI B175.1 standard. The saw chain has a durable design and is weather-resistant for increased life.
|
Our 10 in telescoping pole saw chain is for use with the MILWAUKEE? M18 FUEL? telescoping pole saw and 10 in telescoping pole saw guide bar. The chain's optimized design maximizes efficiency and delivers premium cut quality with low vibration and minimal kickback. The chain's durable design stays sharp in tough conditions and is built with high-strength alloy steel for weather resistance and increased life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our Milwaukee? 8 in pruning saw chain is to be used with the Milwaukee? M18 FUEL? HATCHET? 8 in pruning saw (3004-20) and 8 in pruning saw guide bar (49-16-2751). The full house chain features a cutter on every drive link, which minimizes vibration and delivers clean cuts. The design delivers fast cuts and minimizes kickback. The saw chain has a durable design and is weather-resistant for increased life.
|
Our 12 in top handle chainsaw chain is for use with the Milwaukee? M18 FUEL? 12 in top handle chainsaw (2826-20C) and 12 in top handle chainsaw guide bar (49-16-2743). The chainsaw chain's optimized design maximizes efficiency and delivers premium cut quality with low vibration and minimal kickback. The chain's durable design stays sharp in tough conditions and is built with high-strength alloy steel for weather resistance and increased life.
|
A durable, economical tool that makes hand-sharpening easy. It runs on a standard 12 V auto type battery or connect using an automobile power adapter. Includes sharpening stones, 5/32 and 7/32 in. Use replacement stones (sku #s: 123.1554,123.1885,123.1851).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bar-mounted filing guide to manually sharpen your saw chain with precision.
|
Semi chisel chain features top performing Chamfer Chisel cutters and a notched link for low kickback performance, good chip flow and a smooth cutting action. Twin corners of the cutters deliver great performance on the many popular saws which use low profile 3/8 in pitch chain. Also features four-way symmetrical tie straps which simplifies the joining of chain loops. Fits chainsaws made by Craftsman/Sears, Cub Cadet, Earthwise, Echo, Efco-Emark, Hitachi, John Deere, Milwaukee, Shindaiwa, Skil, Tanaka, Western auto, WORX, Yardworks and others. Gauge for chain is 0.05 in.
|
The Oregon E66 PowerCut? saw chain offers top performance for the most demanding of users which makes it an ideal choice for professional woodcutters. This 3/8 in pitch, low-vibration chain features full chisel cutters. The offset depth gauge design offers a smoother cut. This chain fits saws from several manufacturers including Stihl?, Echo?, John Deere, Poulan? and Homelite?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
An Ideal choice for occasional users like property owners and commercial cutters. The low-vibration, Micro Chisel cutters that have small radius working corners for excellent performance and easy maintenance. Oregon 22BPX chain, low kickback design.
|
The L74 18 in ControlCut? saw chain is an ideal choice for occasional chainsaw users including property owners and commercial cutters. This 0.063 in ga, 0.325 in pitch chain features low-vibration, Micro Chisel? cutters with small radius working corners for excellent performance and easy maintenance.
|
Replacement chain for PowerSharp chainsaws. Precision chainsaw sharpening. Sharpens in seconds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement chain for PowerSharp chainsaws. Precision chainsaw sharpening. Sharpens in seconds.
|
Replacement chain for PowerSharp chainsaws. Precision chainsaw sharpening. Sharpens in seconds.
|
The M72 18 in SpeedCut? saw chain is for arborists and property owners who want top performance. This saw chain is more efficient since it needs less power from the saw. Low vibration, micro-chisel cutters offer excellent performance and easy maintenance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Oregon E68 PowerCut? saw chain is a low-vibration, 3/8 in pitch chain that is ideal for professional woodcutters. This 18 in, 0.050 in ga saw chain features full chisel cutters which offer top performance to the most demanding of users. The offset depth gauge design offers a smoother cut.
|
The Oregon E70 PowerCut? saw chain offers top performance for the most demanding of users, making it an ideal choice for professional woodcutters. This 3/8 in pitch, 0.050 in ga, low-vibration chain features full chisel cutters. The offset depth gauge design offers a smoother cut. This chain fits several saws including Echo? CS451, CS452, CS500, CS500EVL, CS501EVL and CS510EVL.
|
The durable and water-resistant 12 in chainsaw bar is designed to fit 12 in chains on our cordless 20 V max chainsaw (DCCS620). This bar is designed to cut smooth and fast with minimum kickback.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The new S93G X-Cut chain gives you excellent precision and performance in narrow spaces, making it ideal for arborists and tree care experts. The smooth operation, lasting sharpness and low kick back will generate high-cutting efficiency and improve your maneuverability and reduce the strain on your body.
|
Our 14 in top handle chainsaw chain is for use with the Milwaukee? M18 FUEL? 14 in top handle chainsaw and 14 in top handle chainsaw guide bar. The chainsaw chain's optimized design maximizes efficiency and delivers premium cut quality with low vibration and minimal kickback. The chain's durable design stays sharp in tough conditions and is built with high-strength alloy steel for weather resistance and increased life.
|
This 14 in guide bar and chain combination features a 3/8 in low profile chain that is ideal for homeowners and occasional users who want a low-vibration, low kickback saw chain. The chamfer chisel cutters offer outstanding performance and are durable, easy-to maintain and forgiving.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The D70 AdvanceCut? 20 in saw chain is a low kickback chain that is ideal for occasional and commercial chainsaw users. The low vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge.
|
Designed for occasional chainsaw users including property owners and commercial cutters, the J72 ControlCut? saw chain features low-vibration Micro Chisel? cutters with small-radius working corners for excellent performance and easy maintenance. This 0.058 in ga, 0.325 in pitch chain has a low kickback design.
|
The D68 AdvanceCut? saw chain is the ideal low kickback chain for occasional and commercial chainsaw users. The low-vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge. This 18 in, 3/8 in pitch saw chain fits saws made by Cub Cadet?, Husqvarna? and Poulan?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Oregon E72 PowerCut? saw chain is a low-vibration, 3/8 in pitch chain that is ideal for professional woodcutters. This 20 in, 0.050 in ga saw chain features full chisel cutters which offer top performance to the most demanding of users. The offset depth gauge design offers a smoother cut.
|
This water-resistant 16 in chainsaw bar is designed for durability. It fits 16 in chains on our cordless 60 V max chainsaw (DCCS670). The bar is designed to cut smoothly and quickly with minimum kickback.
|
Designed for occasional chainsaw users including property owners and commercial cutters, the H78 ControlCut? saw chain features low vibration Micro Chisel? cutters with small radius working corners for excellent performance and easy maintenance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The D72 AdvanceCut? saw chain is the ideal low kickback chain for occasional and commercial chainsaw users. The low vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge.
|
Designed for occasional and commercial chainsaw users, the Oregon D76 saw chain features low-vibration full chisel cutters that offer top performance. Our patented bent over depth gauge provides a smooth cutting experience.
|
Designed for occasional chainsaw users including property owners and commercial cutters, the L81 ControlCut? saw chain features low vibration Micro Chisel? cutters with small radius working corners for excellent performance and easy maintenance. This 0.063 in ga, 0.325 in pitch chain has a low kickback design.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 14 in guide bar and chain combination features a 3/8 in low-profile chain that is ideal for homeowners and occasional users who want a low-vibration, low-kickback saw chain. The chamfer chisel cutters offer outstanding performance and are durable, easy to maintain and forgiving.
|
This 16 in guide bar and chain combination features a 3/8 in low profile chain that is ideal for homeowners and occasional users who want a low-vibration, low kickback saw chain. The chamfer chisel cutters offer outstanding performance and are durable, easy-to maintain and forgiving.
|
The D81 AdvanceCut? 20 in saw chain is a low kickback chain that is ideal for occasional and commercial chainsaw users. The low-vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Craftsman, Echo, Homelite, Husqvarna Poulan and Poulan Pro. Value pack contains two saw chains.
|
The Oregon M80 SpeedCut? saw chain is ideal for arborists and property owners who want top performance. Oregon SpeedCut narrow kerf cutting systems are more efficient since this require less power from the saw than standard cutting systems. The low-vibration micro chisel cutters have small-radius working corners for excellent performance and easy maintenance. A reshaped cutting surface allows you to get faster, easier cuts. This 20 in, 0.325 in pitch chain has compatible fit with Husqvarna? H30 80.
|
The J78 20 in ControlCut? saw chain is an ideal choice for occasional chainsaw users including property owners and commercial cutters. This 0.058 in gauge, 0.325 in pitch chain features low-vibration, Micro Chisel? cutters with small radius working corners for excellent performance and easy maintenance. This chain fits saws made by Husqvarna?, Echo?, Jonsered?, Efco?, Powerhorse and Power Fist.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The S52T AdvanceCut? saw chain two pack contains two 14 in low-vibration, low-kickback chains designed for homeowners and occasional chainsaw users. These chains feature chamfer chisel cutters with twin cutting corners that offer outstanding performance. These cutters are durable, easy to maintain and forgiving.
|
The Oregon E84 PowerCut? saw chain offers top performance for the most demanding of users, making it an ideal choice for professional woodcutters. This 3/8 in pitch, 0.050 in ga, low-vibration chain features full chisel cutters. The offset depth gauge design offers a smoother cut. This 24 in chain has compatible fit with Stihl? 33RS3 84 and Husqvarna? H47 84.
|
The Oregon Q78 PowerCut? saw chain is ideal for professional loggers and forest workers using 0.325 in pitch saws. The low-vibration, full chisel cutters cut timber quickly and precisely. Offset depth gauges prevent the cutters from driving into the sidewall of the cut for smoother cuts. This 20 in, 0.050 in ga chain fits chainsaws from several brands including Husqvarna?, Echo?, Jonsered?, Makita? and Poulan?. Check the Fit Guide for a complete list including saws from Echo?, Craftsman?, Homelite?, John Deere, Poulan?, Ryobi? and Remington?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shorten downtime when your chainsaw bar is broken or severely worn with this high-endurance 18 in. Replacement chainsaw bar. This water-resistant replacement piece was designed for long-term durability. It fits most 18 in chains and was engineered to produce less kickback while cutting.
|
Our 20 in, 0.325 in pitch, 0.05 in ga saw chain delivers fast hardwood cutting with a multi-axis shape grind and is designed to prevent stalls in sawing applications. The narrow kerf design offers more cuts per charge versus standard kerf chains to maximize battery efficiency. This chain is recommended for use with our M18 FUEL? 20 in dual-battery Chainsaw (2827-22) and 20 in 0.325 in pitch, 0.05 in ga guide bar (49-16-2755) and fits chainsaws and 20 in narrow kerf bars with the same pitch, gauge and drive links.
|
This 16 in guide bar and chain combination features a 3/8 in low-profile chain that is ideal for homeowners and occasional users who want a low-vibration, low-kickback saw chain. The chamfer chisel cutters offer outstanding performance and are durable, easy to maintain and forgiving.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 16 in guide bar and chain combination features a 3/8 in low-profile chain that is ideal for homeowners and occasional users who want a low-vibration, low-kickback saw chain. The chamfer chisel cutters offer outstanding performance and are durable, easy to maintain and forgiving.
|
This 16 in guide bar and chain combination features a 3/8 in chain ideal for occasional commercial users and professionals. The low-vibration full chisel cutters offer top performance, smooth cutting and low kickback. The AdvanceCut? guide bar features a small radius multi-rivet nose for good durability and control.
|
This 16 in guide bar and chain combination features a 3/8 in chain ideal for occasional commercial users and professionals. The low-vibration full chisel cutters offer top performance, smooth cutting and low kickback. The AdvanceCut? guide bar features a small radius multi-rivet nose for good durability and control.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 18 in guide bar and chain combination features a 3/8 in chain ideal for occasional commercial users and professionals. The low-vibration full chisel cutters offer top performance, smooth cutting and low kickback. The AdvanceCut? guide bar features a small radius multi-rivet nose for good durability and control.
|
The Milwaukee? 16 in chainsaw guide bar is to be used with the Milwaukee? M18 FUEL? 16 in chainsaw (2727-20) and 16 in chainsaw chain (49-16-2715). The bar length is 16 in, the pitch is 3/8 in low profile and the gauge is 0.043 in. The narrow kerf design delivers maximum efficiency for longer run time. The saw chain guide bar has a durable design and is weather-resistant for increased life.
|
Scrench, chainsaw maintenance and repair tool, combination screwdriver and wrench in one handy tool. Use to remove bar mount nuts. For replacing the guide bar or chain. Use to adjust chain tension. For use with some of the most popular model chainsaw brands such as: Poulan, Poulan Pro, Husqvarna, Stihl, Echo, Shindaiwa, Jonsered and Partner.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 18 in guide bar and chain combination features a 3/8 in low profile chain that is ideal for homeowners and occasional users who want a low-vibration, low kickback saw chain. The chamfer chisel cutters offer outstanding performance and are durable, easy-to maintain and forgiving.
|
This 20 in guide bar and chain combination features a 3/8 in chain ideal for occasional commercial users and professionals. The low-vibration full chisel cutters offer top performance, smooth cutting and low kickback. The AdvanceCut? guide bar features a small radius multi-rivet nose for good durability and control.
|
This 20 in guide bar and chain combination features a 0.325 in chain ideal for occasional commercial users. The low-vibration micro chisel cutters offer excellent performance, easy maintenance and low kickback. The AdvanceCut? guide bar features a small radius multi-rivet nose for good durability and control.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 18 in guide bar and chain combination features a 0.325 in chain ideal for occasional commercial users. The low-vibration micro chisel cutters offer excellent performance, easy maintenance and low kickback. The AdvanceCut? guide bar features a small radius multi-rivet nose for good durability and control.
|
This 20 in guide bar and chain combination features a 3/8 in chain ideal for occasional commercial users and professionals. The low vibration full chisel cutters offer top performance, smooth cutting and low kickback. The AdvanceCut? guide bar features a small radius Multi-rivet nose for good durability and control.
|
The gentle curve and small nose radius reduce the risk of kickback and facilitate good cutting control. Bars are epoxy-coated to protect against scratches and corrosion.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 20 in guide bar and chain combination features a 0.325 in chain ideal for occasional commercial users. The low-vibration micro chisel cutters offer excellent performance, easy maintenance and low kickback. The AdvanceCut? guide bar features a small radius multi-rivet nose for good durability and control.
|
This 16 in guide bar and chain combination features a 0.325 in chain ideal for occasional commercial users. The low-vibration micro chisel cutters offer excellent performance, easy maintenance and low kickback. The AdvanceCut? guide bar features a small radius multi-rivet nose for good durability and control.
|
Now you can sharpen fast, easy and on the saw with the PowerSharp? system. Includes the 91PS PowerSharp? chain, a guide bar designed for PowerSharp? and the PowerSharp? bar-mount sharpener. Go from dull to sharp in just 3 secs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Now you can sharpen fast, easy and on the saw with the PowerSharp? system. Includes the 91PS PowerSharp? chain, a guide bar designed for PowerSharp? and the PowerSharp? bar-mount sharpener. Go from dull to sharp in just 3 secs.
|
Our 20 in, 0.325 in pitch, 0.05 in ga guide bar is designed with a durable multi-rivet nose and 12 tooth design to withstand tough bore cutting applications. The narrow kerf bar offers more cuts per charge versus standard kerf bars to maximize battery efficiency. This bar is recommended for use with our M18 FUEL? 20 in dual-battery chainsaw (2827-22) and 20 in 0.325 in pitch, 0.05 in ga saw chain (49-16-2752) and fits chainsaws with a K095 tail mount and 20 in narrow kerf chains with the same pitch, gauge and drive links.
|
Now you can sharpen fast, easy and on the saw with the PowerSharp? system. Includes the 91PS PowerSharp? chain, a guide bar designed for PowerSharp? and the PowerSharp? bar-mount sharpener. Go from dull to sharp in just 3 secs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VP Bar and Chain Oil is formulated for great performance within a broader temperature range than other brands. The high-tack formula affords all-season performance in cold and hot temperatures and has up to 136% higher viscosity at bar operating temperature.
|
Formulated with highly refined base stocks and select additives to assure excellent performance. Designed with high-load-carrying capacity to protect against high-pressures generated in the bar and chain during operation. A special tackifier is added to the oil, which promotes good adhesion to moving parts and minimizes oil throw off. Designed especially for lubrication of bar and chains on chain saws and open and enclosed chains on motorcycles, snowmobiles and lawn and garden equipment.
|
Formulated with highly refined base stocks and select additives to assure excellent performance. Designed with high-load-carrying capacity to protect against high-pressures generated in the bar and chain during operation. A special tackifier is added to the oil, which promotes good adhesion to moving parts and minimizes oil throw off. Designed especially for lubrication of bar and chains on chain saws and open and enclosed chains on motorcycles, snowmobiles and lawn and garden equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Oregon D025U AdvanceCut? saw chain reel contains 25 ft of 72 V chain which is an ideal choice for occasional and commercial users. The low-vibration full chisel cutters offer top performance to the user while also providing a smooth cutting experience via our patented bent over depth gauge.
|
The H025U saw chain reel contains 25 ft of ControlCut? chain, an ideal choice for occasional users like property owners and commercial cutters. The low-vibration, Micro Chisel cutters have small radius working corners for excellent performance and easy maintenance.
|
33SL - Ultra low-kickback chisel chain for both professional and consumer users. Provides high cutting speed from 2.5 to 3-1/2 in. Efficient, smooth cutting. Excellent, stay-sharp. 72SG semi-chisel cutter provides cutting efficiency and performance in dirty or rocky conditions. No interference with chip clearance or flow. Standard 72 Series chain chassis. Reduces kickback and allows 3 to 6 cu-in cutting speed. 3/8 in pitch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Oregon D100U AdvanceCut? saw chain reel contains 100 ft of 72 V chain, an ideal choice for occasional and commercial users. The low-vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge.
|
The H100U saw chain reel contains 100 ft of ControlCut? chain, an ideal choice for occasional users such as property owners and commercial cutters. The low-vibration, Micro Chisel cutters have small radius working corners for excellent performance and easy maintenance.
|
|
|
