|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preassembled riser and stake for use with Rain Bird 10 - 32 threaded emission devices.
|
Rain Bird Stake, 6-3/4 in Length, Plastic, Black, Suitable for: 1/2 in Poly Tubing
|
Rain Bird Hole Punch, Plastic, Black, Suitable for: Drippers, 1/4 in Fittings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Rain Bird EC50 1/2 in end closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend your irrigation system. Used with 1/2 in tubing or 1/2 in emitter tubing to allow for easy flushing and draining of the system.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to attach 1/4 in vinyl distribution tubing to wood without pinching the tube.
|
Rain Bird Staked Riser, Adjustable, 18 in Length, Poly, Black, Suitable for: 1/4 in Threaded Drippers and Micro Sprays
|
Rain Bird Drip Irrigation Adapter, 1/2 in Connection, Male x Barb Connection, PVC, Brown, 0 to 60 psi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This valve easily adjusts or shuts off flow in 1/4 in drip tubing runs to different sections of your plant watering area. Avoid over or under-watering of plants with different moisture needs in a timed drip zone. Barbed ends permit easy, leak-free insertion into drip tubing. Top cap turns to adjust or completely shut-off water flow, ideal for use when making repairs. Constructed of high quality, long-lasting UV resistant materials.
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
Universal compression fitting tee for use with all 1/2 in drip tubing brands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.
|
Rain Bird Drip Irrigation Adapter, 3/4 in x 1/2 in and 5/8 in Connection, FPT x Tube Connection, Polyethylene, Black, 40 psi Pressure, Suitable for: 1/2 to 5/8 in Tubing
|
Rain Bird Flush Cap Hose Plug, Universal, 1/2, 5/8 in Connection, Compression Connection, Plastic, Suitable for: 1/2 in or 5/8 in Poly Drip Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stake 1/4 in tubing at desired locations or secure spot watering emitters. Place bug guard at end to prevent bugs and debris from clogging tubing.
|
For use with 1/4 in (0.16 in I.D.) tube only. Connects 1/4 in tubing to faucet or other 3/4 in male hose thread. Includes filter washer.
|
3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring.
|
Rain Bird Drip Irrigation Adapter, 3/4 x 1/4 in Connection, FHT x Tube Connection, Plastic, Black, 40 psi Pressure, Suitable for: 3/4 in Male Threaded Pipe Components
|
Ideal for shrub plantings, trees, containers and flower beds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for shrub plantings, trees, containers and flower beds.
|
Use as an end closure for 1/4 in tubing or as a side plug for 1/2 in tubing.
|
Connect 2 pieces of 1/2 in tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty plastic stakes hold 1/4 in lines in place.
|
Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi.
|
Rain Bird Fan Micro Spray, Riser Mount, Part-Circle, 70 psi Operating, 0 to 31 gph Flow Rate, 0 to 10 ft Coverage Diameter, Black, Plastic Base, Includes: (2) Fan Micro Sprays
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double barbed design allows use with higher water pressures. For use with 1/4 in (0.160 to 0.197 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi.
|
Double barbed design allows water pressure up to 50 psi.
|
Closes ends of 1/2 in (0.620 to 0.630 in OD) poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to shut-off the end of 1/2 in rain drip poly hose. Removes easily.
|
Riser adapter for drip and sprinkler watering allows both irrigation methods to be used at once, covering all plants effectively.
|
Easily adjust or shut off flow in 1/2 in or 5/8 in drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Mister, Threaded, Specifications: 0 to 31 gph Flow Rate, 10 to 30 psi Operating Pressure, 10-32 Threaded Inlet Type, 0 to 1-1/2 in Throw Radius, Plastic, Black
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.
|
Designed for comfortable use, punches holes in 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings. Handle has socket for installing and removing Micro spray jets. Card includes hole plugs.
|
Connect 2 pieces of 1/2 in tubing in an "L" shape.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect 3 pieces of 1/2 in tubing in a "T" shape.
|
Rain Bird Mister Spray, 1/4 in Connection, Barb Connection, Spray Pattern: Full-Circle, Mist, 360 deg Spray Angle, 0 to 6 gph Flow Rate, Plastic, Black, Dimensions: 12 x 1/4 x 1/4 in
|
For water pressure up to 60 psi. Ends are color-coded for easy size identification.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.
|
Connect 3 pieces of 1/4 in tubing in a "T" shape or tap into the side of 1/2 in tubing.
|
Rain Bird Drip Irrigation Tee with FHT Adapter, Universal, 3/4 x 1/2 in Connection, FHT x Compression Connection, Polyethylene, Black, 0 to 60 psi Pressure, Suitable for: 1/2 in End Closure, 3/4 in x 1/2 in FHT x MTH Adapter, 1/2 to 5/8 in Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing.
|
Connect 2 pieces of 1/4 in tubing or tap into the side of 1/2 in tubing.
|
Compression tees made from ABS. For water pressure up to 60 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Free-Flow Manifold, 1/2 x 1/4 in, FPT x Barb, 6-Port, 50 psi, Gallons per Minute: 2 gpm, Black
|
Swivel tee assembly for 1/2 in double drip manifold. Connects two 1/2 in poly hose to a 1/2 in sprinkler riser. Includes tee, filter, 3-way connector and 2 flow controls.
|
Adjust, balances or shuts off water flow to watering circuits, zones or plants. For use with 1/4 in (0.160 in ID) vinyl tubing only. Double barbed design allows water pressure up to 50 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The drippers' 0.5 GPH flow is ideal for small containers and plants with relatively low moisture needs.
|
2 gph, 1/2 in FPT 6-port metered manifold. For drip irrigation systems. Installs onto 1/2 in riser. Connects up to 6 micro watering devices to a sprinkler riser.
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adds supplemental watering to individual plants.
|
Uniformly sprays water over a semicircular area with an adjustable radius of up to 7 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
3/4 in hose female thread inlet; 3/4 in male hose thread outlet. Includes filter washer. Available in 3/4 in BSP threads. Atmospheric vacuum breaker made of high impact ABS. Keeps impure water from syphoning back into water supply. Maximum flow rate of 480 GPH.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Atmospheric vacuum breakers made of high-impact ABS. Keeps impure water from syphoning back into water supply. 3/4 in hose female thread inlet, 3/4 in male pipe thread outlet. Includes filter washer. Available in 3/4 in BSP threads.
|
Uniformly sprays water over a semicircular area with an adjustable radius of up to 8 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
Use with spot watering emitters or to run water to emitter tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Rotary Micro Sprinkler, Riser Mount, 1/4 in Connection, Full-Circle, 0 to 70 psi Operating, 0 to 33 gph Flow Rate, 0 to 14 ft Coverage Diameter, Black, Includes: (4) Rotary Micro Sprinklers
|
Rain Bird Micro Umbrella Bubbler, Barb Connection, Staked Dripper Type, 70 psi Maximum, 0 to 35 gph Gallons per Hour, Spray Pattern: Full-Circle, 1/4 in Tubing Size, Black, Includes: (4) Micro Umbrella Bubblers
|
Half circle, Ideal for shrub plantings, trees, containers and flower beds. Connect to 1/2 in tubing with barbed coupling (included) and 1/4 in tubing. Spray pattern 180 deg rotation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy way to add or remove spot watering emitters, fittings and plugs.
|
Heavy-gauge galvanized wire secures 1/2 in tubing to the ground.10 Pack.
|
Sprays 12 individual streams over a circular area with an adjustable diameter of up to 18 ft. For windy conditions, sprayer inlet size is 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect to 1/2 in tubing with barbed coupling (included) and 1/4 in tubing.
|
Remains strong in the hot sun, flexible in cool temperatures. Black Color.
|
Adjustable low-flow sprinkler heads. Waters two 30 deg patterns each with a radius up to 8 ft. Adjustable length of up to 16 ft x 4 ft. Sprayer inlet size of 10-32 NFT. Knob adjusts the flow (4 to 20 gph at 25 psi) and diameter of spray.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Micro Bubbler, Barb Connection, Self-Piercing Dripper Type, 40 psi Maximum, 0 to 13 gph Gallons per Hour, Spray Pattern: Full-Circle, 1/2 in Tubing Size, Black, Includes: (4) Micro Bubblers
|
Rain Bird Pressure Regulator, FHT Inlet Connection Type, MHT Outlet Connection Type, 20 gpm Flow Rate, 25 psi Pressure, Black, 1.3 in Length, 10.2 in Width, 6-1/2 in Height
|
Quickly and easily connects to any 3/4 male pipe threaded (MPT) outdoor faucet, garden hose or component. Safely prevents backward flow of water from a drip irrigation system into your potable/clean drinking water supply. Stainless steel 150 mesh filter catches debris to help keep system functioning properly. Simply thread into place; take care fitting is fully tightened so rubber gasket can correctly seal assuring leak-proof performance. Constructed of highly durable UV and chemical-resistant materials to assure long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable mister and 4 in high-density polyethylene riser with 1/4 in barbed adaptors. Adjustable from fine to heavy mist up to 3 ft Dia. Flow rate 4 to 7 gph at 25 psi.
|
Designed for use on level ground and shorter circuits. Ideal for heavy soil (clay).
|
Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2GPH) - Ideal for heavy soil (clay). Black-(1GPH) - Ideal for medium soil(loam) Green -(2GPH) Ideal for light soil (sandy).
|
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil(loam) Green (2 gph) - ideal for light soil (sandy).
|
Adds supplemental watering to individual plants.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS.
|
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil (loam) Green (2 gph) - ideal for light soil (sandy).
|
Blank tubing. 1/4 in distribution tubing for drip irrigation. 6 mm OD. Connects with Rain Bird 1/4 in barbed fittings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/2 in blank (distribution) tubing is used to run water from an outside faucet or other water source to the planting area. Kink-resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in emitter tubing with Rain Bird 1/2 in barbed or compression fittings. To place watering devices near plants, add 1/4 in tubing runs by tapping into the side of this 1/2 in tubing with 1/4 in barbed couplings.
|
Remains strong in the hot sun, flexible in cool temperatures. Color-Black.
|
Rain Bird Dripper Emitter, 1/4, 1/2 in Connection, Barb Connection, Dripper Type: Flag Style, Maximum Pressure: 40 psi, Gallons per Hour: 1 gph, Spray Pattern: Drip, Tubing Size: 1/4, 1/2 in, Plastic, Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for comfortable use. Punches holes 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings.
|
Professional quality Raindrip 1/2 in hose is made from linear, low-density polyethylene (poly). Composed of 2.2% carbon black and UV inhibitors, it can be left out year-round, buried or on the surface, in any weather. Great to hose made from reprocessed materials.
|
Rain Bird Inline Filter, MNPT Inlet Connection Type, MNPT Outlet Connection Type, 0.2 to 5 gpm Flow Rate, 150 psi Pressure, Black, 2-1/8 in Length, 6 in Width, 4-3/8 in Height
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Manifold, 1/2 x 1/4 in Connection, FPT x Barb Connection, 9 Ports, 25 psi Maximum, 1/4 in Tubing Size, ABS, Black
|
Using patented technology, converts a traditional underground sprinkler system to a micro irrigation drip system. Waters Up to eight plants with one unit. Fully adjustable ports with flows that can be individually set from 0 to 30 gph. Swivel arms aid in fine-tuning outlet tubing position. Pressure-rated up to 8880 psi. Built-in filter extends system lifespan by preventing clogging from debris. UV inhibitors minimize polymer breakdown when used in outdoor applications.
|
1/2 in blank (distribution) tubing is used to run water from an outside faucet or other water source to the planting area. Kink-resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in emitter tubing with Rain Bird 1/2 in barbed or compression fittings. To place watering devices near plants, add 1/4 in tubing runs by tapping into the side of this 1/2 in tubing with 1/4 in barbed couplings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Removes dirt particles from water supply, feeds plants automatically as they are watered. Handles up to 720 GPH through 150 mesh (100 micron) stainless steel or poly screen element. Recommended for well water. Includes hose/pipe swivel coupling. Filter inlets and outlets are NPT.
|
Rain Bird Hole Punch and Tubing Cutter, Ergonomic Handle, Steel, Purple, Suitable for: Drippers, 1/4 in Fittings
|
Convert an 1800? spray head or a riser to a drip zone. This all-in-one unit includes a 200 mesh filter and 30 psi pressure regulator for proper operation of a drip irrigation system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Professional quality Raindrip 1/2 in hose is made from linear, low-density polyethylene (poly). Composed of 2.2% carbon black and UV inhibitors, it can be left out year-round, buried or on the surface, in any weather. Great to hose made from reprocessed materials.
|
Flexible 1/4 in emitter tubing is ideal for extending watering to narrow planting areas and container plants. Each emitter is spaced 12 in apart and emits 1 gph of water.
|
Rain Bird's 1/4 in emitter tubing waters plants uniformly with pre-installed, pressure compensating emitters spaced every 6 in. The emitters are designed for clog-resistant flow at 0.8 gph (gallons per hour) to ensure even, reliable watering. Just cut, place and connect in any arrangement using Rain Bird 1/4 in barbed fittings and stakes (purchased separately). Flexible 1/4 in emitter tubing is ideal for extending watering to narrow planting areas and container plants. Constructed of UV-resistant polyethylene resin materials giving it the flexibility of vinyl with the hold of poly. Unique micro-porous design creates an ultra-tight connection, tubing expands over fittings and shrinks making it almost impossible to remove without cutting. Professional-grade features include extra flexibility for kink-free installation, plus unmatched resistance to chemicals, algae growth and UV damage. For installations at or below grade.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For outdoor faucet or hose. Includes backflow preventer, 150 mesh filter (pre-installed inside backflow preventer) and 25 psi regulator. Multi-function kit ensures proper operation of your drip irrigation system.
|
Everything needed for complete installation for raised bed vegetable gardens watering systems. Waters up to 150 sq-ft, ideal for raised bed vegetable gardens. Mini in-line dripper for custom placement. Kit dimension of 8-1/4 in W x 2-1/2 in D x 8-1/2 in H.
|
1/2 in emitter tubing waters plants uniformly with pre-installed pressure compensating emitters spaced every 18 in. Designed for clog-resistant flow at 0.9 gph to ensure even, reliable watering.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rain Bird Drip Bubbler Conversion Kit, Number of Pieces: 15, Includes: (6) Bug Caps, (6) Stakes to Direct Flow at Each Plants, (1) 1800 Retro Sprayhead with Filter and Pressure Regulator, (1) 50 ft 1/4 in Distribution Tubing, (1) 6 Port Manifold
|
Automatic water timer includes a universal fitting for drip tubing. Features a timed rain delay to pause automatic watering for up to 72 hrs and an automatic timed manual watering feature that allows it to resume watering once manual cycle ends without losing the programmed settings. Easy to program and attaches to any outdoor faucet, standard drip tubing or garden hose. Solenoid and diaphragm valve on/off control. Low battery indicator. Fail safe to off when battery level becomes low. Uses two AA batteries (Not Included). Program retains settings when batteries are replaced within 15 secs after being removed. Requires a minimum of 15 psi for unit to work properly. Dimension of 6 x 3 x 10.7 in when assembled.
|
Rain Bird Drip Watering Kit, Green, Number of Pieces: 108, Includes: Backflow Preventer, Filter, Garden Hose Connection, Pressure Regulator, Sprinklers, Stakes and Tubing
|
|
|
