Home > ELECTRICAL > ROUGH ELECTRICAL > OUTDOOR BOXES & LAMPHOLDERS
Choose a sub category:
WEATHERPROOF BOXES WEATHERPROOF COVERS WEATHERPROOF LAMPHOLDERS
BOX/COVER GASKETS
Sort By:
1
Bell Raco 5173-1 Blank Weatherproof Device Cover Bell Raco 5173-2 Blank Weatherproof Device Cover Hubbell 5173-5 Blank Weatherproof Cover
Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated.
Hubbell 5173-6 Blank Weatherproof Cover Hubbell 5374-0 Blank Round Flat Weatherproof Cover Bell Raco 5173-7 Blank Weatherproof Device Cover
Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated. For use with 4 in round splice boxes. Installation hardware and gasket included. 4 in Dia, shrink wrapped. UL listed. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated.
Bell 5019-0 Replacement Rectangular Multipurpose Gasket Bell 5269-5 Closure Plug Bell 5269-7 Closure Plug
Hubbell Replacement Gasket, Polyethylene Foam, Black, 4-5/8 in L, 2.875 in W, 1/8 in Thick, Suitable for: Bell? Weatherproof Covers and Lampholders For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets.
Bell 5269-6 Closure Plug Bell 5269-0 Closure Plug Bell Raco 5175-0 Blank Weatherproof Device Cover
For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. Hubbell Closure Plug, Trade Size: 1/2 in, Zinc, Gray, 0.313 in L, Suitable for: BELL Weather-Proof Boxes, Extension Adapters, Cluster Covers and Round Splice Boxes to Seal Off Unused Outlets For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL listed, NEMA 3R Rated. 4-1/2 in x 4-1/2 in.
Bell Raco 5175-1 Blank Weatherproof Device Cover Bell 5270-5 Closure Plug Hubbell 5175-5 Blank Weatherproof Cover
For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL listed, NEMA 3R Rated. 4-1/2 in x 4-1/2 in. Bell Closure Plug, Weatherproof, Trade Size: 3/4 in, Zinc-Plated, Gray, Suitable for: BELL Weatherproof Boxes, Extensions, Cluster Covers, Round Splice Boxes For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL listed, NEMA 3R Rated. 4-1/2 in x 4-1/2 in.
Hubbell 5193-0 3-Hole Cluster Lampholder Cover Bell Raco 5193-1 Round Cluster Cover Bell Raco 5180-1 2-Hole Weatherproof Device Cover
For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Use 75 to 150 W maximum, Die-cast zinc. One 1/2 in NPT hole. UL listed. Hubbell Combination Cover, Round, Metal, Powder-Coated, Gray, 1.094 in L, 4-1/8 in W, 4.125 in H, 4-1/8 in Dia, NEMA Rating: 3R, Includes: (2) Lamp Holders, Gasket, Mounting Hardware Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated.
Arrow Hart S2962 Weatherproof Cover Hubbell 5180-0 Weatherproof Device Cover Bell Raco 5180-2 2-Hole Weatherproof Device Cover
Tough plastic construction, resistant to high impact and sunlight. Non-corrosive and non-conductive. Gasket provided seals both device openings and edges. Self closing cover. Vertical only. UL listed for wet locations with cover closed. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. Bell 5180 Weatherproof Flip Cover, Number of Gangs: 1, Aluminum, Powder-Coated, Bronze, 4.563 in W, 2.813 in H, NEMA Rating: 3R, Device Mounting, Includes: Mounting Hardware, Gasket
Hubbell 5186-0 1-Hole Cluster Lampholder Cover Hubbell 5180-6 Weatherproof Device Cover Bell Raco 5186-6 1-Hole Cluster Rectangular Weatherproof Cover
For wet locations. Gasket, screws and plugs included. Use 75 to 150 W maximum, PAR38 lamps. Die-cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket and multi-lingual instructions. One 1/2 in NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. For wet locations. Gasket, screws and plugs included. Use 75 to 150 W maximum, PAR38 lamps. Die-cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket and multi-lingual instructions. One 1/2 in NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated.
Bell Raco 5186 Rectangular Cluster Cover Bell Raco 5320-1 Weatherproof Box Bell Raco 5406-0 Weatherproof Extension Box
Bell Cluster Cover, Rectangular, Weatherproof, 4.594 in H, Aluminum, Gray, Includes: Mounting Hardware, Gasket For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. Hubbell Weatherproof Extension Ring, Aluminum, Gray, Horizontal, Vertical Mounting, 1 in D
Hubbell 5320-0 Outlet Box Hubbell 5180-5 Weatherproof Device Cover Bell Raco 5180-7 2-Hole Weatherproof Device Cover
For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated.
Bell Raco 5193-6 Round Cluster Cover Bell Raco 5193-5 Round Cluster Cover Bell Raco 5197-1 Round Cluster Cover
For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Use 75 to 150 W maximum, Die-cast zinc. One 1/2 in NPT hole. UL listed. For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Use 75 to 150 W maximum, Die-cast zinc. One 1/2 in NPT hole. UL listed. Hubbell Lampholder Cluster Cover, Round, Metal, Powder-Coated, White, 1.094 in L, 4-1/8 in W, 4.125 in H, 4-1/8 in Dia, NEMA Rating: 3R, Includes: (2) Closure Plugs, Gasket, Multi-Lingual Instructions and Installation Hardware
Bell Raco 5193-7 3-Hole Cluster Lamp Holder Cover Bell Raco 5189 Rectangular Cluster Cover Hubbell 5197-0 3-Hole Cluster Lampholder Cover
For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Use 75 to 150 W maximum, Die-cast zinc. One 1/2 in NPT hole. UL listed. Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Die-cast zinc. Three 1/2 in NPT holes. UL listed.
Hubbell 5189-0 3-Hole Cluster Lampholder Cover Bell Raco 5189 Rectangular Cluster Cover Bell Raco 5197-2 Round Cluster Cover
Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Die-cast zinc. Three 1/2 in NPT holes. UL listed.
Bell Raco 5606 Lampholder Hubbell 5606 Adjustable Weatherproof Lampholder Bell Raco 5155-6 Round Opening Weatherproof Device Cover
Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. With powder coat finish for weatherability and scratch resistance. For use whenever weatherproof protection is required for an outdoor receptacle. Self-closing lid for weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in L x 2-3/4 in W x 1-13/32 in D. UL listed, Meets Standard 514A, C22.2 No. 18, (5103 Series) NEMA 3R rated.
Hubbell 5155-5 Single Device Cover Bell Raco 5606 Lampholder Bell Raco 5189 Rectangular Cluster Cover
With powder coat finish for weatherability and scratch resistance. For use whenever weatherproof protection is required for an outdoor receptacle. Self-closing lid for weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in L x 2-3/4 in W x 1-13/32 in D. UL listed, Meets Standard 514A, C22.2 No. 18, (5103 Series) NEMA 3R rated. Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Bell Raco 5197-5 Round Cluster Cover Bell Raco 5606 Lampholder Hubbell 5189-6 3-Hole Cluster Lampholder Cover
For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Die-cast zinc. Three 1/2 in NPT holes. UL listed. Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Hubbell 5197-6 3-Hole Cluster Lampholder Cover Bell Raco 5197-7 3-Hole Cluster Round Weatherproof Cover Bell Raco 5189-7 3-Hole Cluster Rectangular Weatherproof Cover
Bell Electrical Box Cover, Round, Aluminum, Powder-Coated, White, 1.094 in L, 4-1/8 in Dia, NEMA Rating: NEMA 3R, Wall Mounting, Includes: Gasket and Mounting Hardware Hubbell 5197 Cluster Cover, Round, Number of Gangs: 1, Die-Cast Aluminum, Powder-Coated, Bronze, 1.094 in L, 4-1/8 in W, 4-1/8 in H, 4-1/8 in Dia, NEMA Rating: 3R, Wall Mounting, Suitable for: BELL 1-Gang or Round Weather-Proof Boxes, Includes: (2) Closure Plugs, Gasket, Mounting Hardware Bell 5189 Weatherproof Cluster Cover, Rectangular, Number of Gangs: 1, Aluminum, Powder-Coated, Bronze, 2.844 in W, 4.594 in H, NEMA Rating: 3R, Device Mounting, Suitable for: BELL 1-Gang or Round Weather-Proof Box, Includes: Mounting Hardware, Gasket
Hubbell 5320-6 Outlet Box Bell Raco 5320-2 Weatherproof Box Bell Raco 5361-2 Splice Box
For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed.
Bell Raco 5361-1 Single Ended Splice Box Arrow Hart S1962W-SP Weatherproof Cover Arrow Hart S1961 Weatherproof Cover
For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed. Tough plastic construction, resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. UL listed for damp locations. Stay open lids. Size 2-3/4 in x 4-1/2 in. Resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. Lid stays open in use. UL listed for damp locations.
Bell Raco 5152-0 Weatherproof Device Cover Hubbell 5606 Adjustable Weatherproof Lampholder Bell Raco 5611-0 Replacement Outer Gasket
State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Installation hardware, gasket, multi-lingual instructions included. For single 1-13/32 in Dia receptacle. UL listed for wet location with cover closed. Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. Replacement gasket for Bell lampholders. UL standard CSA certified.
Bell Raco 5606 Adjustable Lampholder Hubbell 5361-6 Splice Box Hubbell 5324-0 Outlet Box
Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed. With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4 in outlets. Powder coat finish. 18.3 cu-in capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed.
Arrow Hart S1962 Utility Halogen Low Profile Weatherproof Cover Arrow Hart S1961W-SP Weatherproof Cover Bell Raco 5320-5 Outlet Box
Tough plastic construction, resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. UL listed for damp locations. Stay open lids. Size 2-3/4 in x 4-1/2 in. Resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. Lid stays open in use. UL listed for damp locations. For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated.
Hubbell 5361-5 Splice Box Bell Raco 5324-5 Outlet Box Bell Raco 5320-7 Weatherproof Outlet Box
For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed. With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4 in outlets. Powder coat finish. 18.3 cu-in capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated.
Spot-Gro 5330-0 Weatherproof Box Bell Raco 5321-5 Weatherproof Outlet Box Bell Raco 5361-7 Splice Box
With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Powder coat finish. 16.5 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. Shrink wrapped. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2 in threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in depth. 18.3 cu-in capacity. 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed.
Hubbell 5321-0 Outlet Box Hubbell 5361-0 Splice Box Bell Raco 5103-0 1-Hole Weatherproof Device Cover
Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2 in threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in depth. 18.3 cu-in capacity. 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed. Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped.
Hubbell 5101-6 Weatherproof Device Cover Bell Raco 5146-0 1-Hole Weatherproof Device Cover Bell Raco 5103-1 1-Hole Weatherproof Device Cover
For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated. Waterproof protection for outside receptacle. Metallic construction, powder coat finish. Scratch-resistant. Self-closing lid when not in use. Includes installation hardware, gasket and multi-lingual instructions. 4-1/2 in L x 2-3/4 in W. C/UL/US UL 514-A listed, File E195978 (5132-5146) CSA C22.2 No. 18 (5132-5146) NEMA 3R rated. Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped.
Bell Raco 5103-2 1-Hole Weatherproof Device Cover Bell Raco 5101-2 1-Hole Weatherproof Device Cover Bell Raco 5101-1 1-Hole Weatherproof Device Cover
Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped. For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated. For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated.
Bell Raco 5101-0 1-Hole Weatherproof Device Cover Bell Raco 5321-1 Weatherproof Box Bell Raco 5331-0 Weatherproof Box
For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2 in threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in depth. 18.3 cu-in capacity. 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Five 3/4 in threaded outlets. Powder coat finish. 18.3 cu-in capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed, CSA Approved and NEMA 3R Rated.
Bell Raco 5321-2 Weatherproof Box Raco 5372-0 Weatherproof Splice Box Bell Raco 5322-0 Weatherproof Box
Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2 in threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in depth. 18.3 cu-in capacity. 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed. Weatherproof box, with lugs. Five 1/2 in threaded outlets. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in D x 4-1/2 in L x 2-3/4 in W. 18.3 cu-in capacity. UL listed. CSA 22.2 No. 18 NEMA 3R Rated.
Carlon E98TSCN-CAR Weatherproof Device Cover Hubbell 5121-5 Weatherproof Device Cover Hubbell 5101-5 Weatherproof Device Cover
Weatherproof cover for single toggle switch applications. Vertical mount. UV resistant, suitable for outdoor use. Nonmetallic/noncorrosive, won't rust or fade, paintable. UL Marine Listed, CSA Certified. For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2 in L x 2-3/4 in W. UL listed, CSA, NEMA 3R Rated. For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated.
Bell Raco 5146-5 Weatherproof Device Cover Bell Raco 5121-1 Weatherproof Switch Cover COVER 1G VERTICAL WP GFCI GRAY
Waterproof protection for outside receptacle. Metallic construction, powder coat finish. Scratch-resistant. Self-closing lid when not in use. Includes installation hardware, gasket and multi-lingual instructions. 4-1/2 in L x 2-3/4 in W. C/UL/US UL 514-A listed, File E195978 (5132-5146) CSA C22.2 No. 18 (5132-5146) NEMA 3R rated. For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2 in L x 2-3/4 in W. UL listed, CSA, NEMA 3R Rated. Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped.
Bell Raco 5101-7 1-Hole Weatherproof Device Cover Bell 5400-0 Extension Adapter Hubbell 5323-0 Outlet Box
For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated. Used to provide additional capacity needed for NEC box fill requirements. Die-cast aluminum construction. 6 threaded 1/2 in outlets. Installation hardware gasket and 1/2 in closure plugs included. Ground screw is provided. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded 1/2 in fittings and threaded conduit. 5-1/4 in L x 3-1/2 in W x 1-1/2 in D. UL listed. NEMA 3R rated. With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCIs. 5 reinforced 1/2 in threaded connector outlets. Powder coat finish. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. 2 in D x 4-1/2 in L x 2-3/4 in W. 18.3 cu-in capacity. UL listed.
Arrow Hart S2966W-SP Decorative Weatherproof Cover Arrow Hart S3966W-SP Decorative Weatherproof Cover Carlon E98SRCN-CAR Weatherproof Cover
Plastic, impact and sunlight resistant. Gaskets provided to seal cover edges as well as device openings. Self closing cover. Stainless steel mounting screws furnished. Vertical, flush or surface mount. UL listed. For GFCI/Decorator receptacle used in wet locations. Gaskets provided to seal cover edges as well as device openings. Stainless steel mounting screws included. Horizontal flush or surface mount. UL listed. For 15 A or other single receptacles under 1-3/8 in Dia. Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed.
Carlon E98G5FN-CAR Weatherproof Cover Carlon E98DHGN-CAR Weatherproof Cover Carlon E98GFCN-CAR Weatherproof Device Cover
For 50 A twist lock single receptacles under 2-1/4 in Dia. For exposed applications. Will not rust or corrode. Gaskets and screws included. UL listed. Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed. Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed. 2.63 in H x 1.31 in W opening.
Carlon E98SSCN-CAR Weatherproof Cover Carlon E98GDRN-CAR Weatherproof Device Cover Arrow Hart S2966 Decorative Weatherproof Cover
Non-conductive. Suitable for wet locations. Gaskets and screws included. UL listed. Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed. Plastic, impact and sunlight resistant. Gaskets provided to seal cover edges as well as device openings. Self closing cover. Stainless steel mounting screws furnished. Vertical, flush or surface mount. UL listed.
Arrow Hart S3966 Decorative Weatherproof Cover RECPTCL/CVR DPLX HRZ WP GRY 1G Bell Raco 5141-0 Weatherproof Switch Cover
For GFCI/Decorator receptacle used in wet locations. Gaskets provided to seal cover edges as well as device openings. Stainless steel mounting screws included. Horizontal flush or surface mount. UL listed. Taymac Weatherproof Cover, Aluminum, Gray, 4-9/16 in L, 2-13/16 in W, NEMA Rating: 3R, Horizontal Mounting, Includes: Gasket, Installation Hardware Weatherproof protection for an "on-off" type switch. Vertical, mounted to device. Rugged die-cast construction, powder coat finish. Self-closing lid assures weatherproof protection when not in use. Supplied with a switch - no need to purchase separate components. Switch is unassembled to the cover. UL, CSA and NEMA 3R rated. Shrink wrapped.
Bell Raco 5141-5 3-Way Weatherproof Cover Bell Raco 5333-0 Weatherproof Box Hubbell 5337-5 Outlet Box
For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2 in L x 2-3/4 in W. UL listed, CSA, NEMA 3R Rated. With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Three 1/2 in threaded outlets. Powder coat finish. 32 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 4-1/2 in x 4-1/2 in x 2 in deep. UL listed, CSA Approved and NEMA 3R Rated. For use in branch circuit wiring in wet, damp or dry locations. Can be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Five 1/2 in threaded outlets. 31 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 4-9/16 in W. Multi-lingual instructions. UL listed. NEMA 3R Rated.
Hubbell 5400-5 Extension Box Adapter Bell 5363-0 Round Weatherproof Extension Adapter Bell Raco 5337-1 Weatherproof Box
Used to provide additional capacity needed for NEC box fill requirements. Die-cast aluminum construction. 6 threaded 1/2 in outlets. Installation hardware gasket and 1/2 in closure plugs included. Ground screw is provided. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded 1/2 in fittings and threaded conduit. 5-1/4 in L x 3-1/2 in W x 1-1/2 in D. UL listed. NEMA 3R rated. Used to provide additional capacity. Die-cast aluminum construction. Includes installation hardware, closure plugs, gasket and multi-lingual instructions. Four 1/2 in threaded outlets. Accepts all threaded 1/2 in fittings and threaded conduit. 4 in round, 1-1/2 in D. UL listed, CSA, NEMA 3R rated. Shrink wrapped. For use in branch circuit wiring in wet, damp or dry locations. Can be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Five 1/2 in threaded outlets. 31 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 4-9/16 in W. Multi-lingual instructions. UL listed. NEMA 3R Rated.
Thomas & Betts E381DR Type T Weatherproof Switch Box Raco 5341-0 Square Weatherproof Outlet Box Bell Raco 5337-0 Infrared Brooder Weatherproof Box
Weatherproof for use with non-metallic wiring systems. Non-conductive, non-corrosive and impact-resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2 in threaded ports, one on each end and one in the back. UL listed. With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. 2 in deep, three 3/4 in threaded outlets. 32 cu-in capacity. Powder coat finish. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. UL listed, CSA Approved and NEMA 3R Rated. For use in branch circuit wiring in wet, damp or dry locations. Can be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Five 1/2 in threaded outlets. 31 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 4-9/16 in W. Multi-lingual instructions. UL listed. NEMA 3R Rated.
Arrow Hart S992 Weatherproof Cover Arrow Hart S989-SP Weatherproof Cover Bell Rayntite 5034-0 Weatherproof Device Cover
For single devices, take either single receptacle or switch. Corrosion resistant materials suitable for exposure to weather. Gaskets provided to seal cover edges and openings. Mount on flush or surface 1-gang boxes. Gray color. UL listed. Polybagged. Corrosion resistant materials suitable for exposure to weather. Gaskets provided to seal cover edges and openings. Corrosion-resistant mounting screws included. Mount on flush or surface single gang boxes. UL listed. For weatherproof 30 to 50 A receptacles and wet locations. 2-5/8 in Dia. Die-cast aluminum construction, powder coat finish. Scratch-resistant. Self-closing lid assures protection when the receptacle is not in use. Padlockable. May be mounted to box or device. Includes installation hardware, gasket and multi-lingual instructions. UL listed 514-A, File E 195978 CSA C22.2 No. 18 NEMA 3R rated. Shrink wrapped.
COVER WP 1G IN-USE EXPNDBL GRY COVER IN-USE WP EXP 1-GANG WHT COVER IN-USE WP EXP 1-GANG BRZ
Taymac EXTRA DUTY Weatherproof In-Use Cover, Polycarbonate/Synthetic Neoprene Rubber, Gray, 3 in L, 4.04 in W, 6.14 in H, NEMA Rating: 3R, Horizontal, Vertical Mounting, Includes: Gasket, Mounting Hardware Taymac EXTRA DUTY Electrical Box Cover, Number of Gangs: 1, Polycarbonate/Synthetic Neoprene Rubber, White, 3 in L, 4.04 in W, 6.14 in H, NEMA Rating: 3R, Includes: Gasket, Mounting Hardware Taymac Weatherproof In-Use Cover, Number of Gangs: 1, Polycarbonate, 6.14 in L, 4.04 in W, 3 in H, NEMA Rating: 3R, Keyhole Mounting, Includes: (1) Attached Gasket, (1) Mounting Hardware
Carlon Code Keeper Red Dot CKNM-NG Weatherproof Cover COVER WALLPLTE 1G 16-1 IN-USE Bell Raco 5624 Combination Weatherproof Lampholder
Accepts GFCI, duplex, switch and up to 1-3/8 in round devices. Nonconductive, noncorrosive and impact resistant. Won't rust or fade. Scratch-resistant. For use in wet/damp locations. Keyhole mounts, loosen the existing device screws and slide the cover over. Comes with adapter plates and pre-adhered gaskets. Wasp guard included to keep out unwanted pests. Lockable for security. UL listed. TAYMAC In-Use Cover, Thermoplastic, Clear, 2-3/4 in L, 4-1/2 in W, 5-2/25 in H, NEMA Rating: 3R, Vertical Mounting, Package Type: Shrink, Package Quantity: 8, Includes: Attached Gasket, Mounting Hardware Die-cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75 to 150 W maximum, Par38 lamps, not included. UL listed 1598 C/UL.
Hubbell 5621 Weatherproof Combination Lampholder Bell Raco 5624-1 Combination Weatherproof Lampholder Hubbell 5148-5 Weatherproof Device Cover
Die cast zinc with rectangular cover and porcelain sockets. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps, not included. Includes gasket, screws and plugs. UL listed. Die-cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75 to 150 W maximum, Par38 lamps, not included. UL listed 1598 C/UL. Waterproof protection for outside receptacle. Self-closing lids. Installation hardware, gasket and multi-lingual instructions included. Size: 4-1/2 in W x 4-1/2 in L. cULus UL 514-A listed, CSA and NEMA 3R rated.
Rayntite 5028-5 Weatherproof Device Cover Bell 5145-0 Weatherproof Cover 4-1/2 in L x 4-9/16 in W Bell Rayntite 5028-6 Weatherproof Weatherproof Device Cover
For outdoor GFCI receptacles and wet locations. Die-cast aluminum construction, powder coat finish. Scratch-resistant. Self-closing lid assures protection when not in use. Padlockable. May be mounted to box or device. Includes installation hardware, gasket and multi-lingual instructions. 4-1/2 in L x 2-3/4 in W. UL listed 514-A, File E 195978 CSA C22.2 No. 18 NEMA 3R rated. Cast cover for use whenever weatherproof protection is required for an outdoor receptacle. Heavy-duty metallic construction will last the life of the installation. Self-closing lids assure weatherproof protection when the receptacle is not in use. Comes with installation instructions, gasket and hardware. UL, CSA Compliant. For outdoor GFCI receptacles and wet locations. Die-cast aluminum construction, powder coat finish. Scratch-resistant. Self-closing lid assures protection when not in use. Padlockable. May be mounted to box or device. Includes installation hardware, gasket and multi-lingual instructions. 4-1/2 in L x 2-3/4 in W. UL listed 514-A, File E 195978 CSA C22.2 No. 18 NEMA 3R rated.
Bell Rayntite 5030-0 Weatherproof Cover Carlon E9G2SSNR Weatherproof Cover Hubbell 5621 Weatherproof Combination Lampholder
For 30 to 50 A receptacles, 2-5/32 in Dia. Die-cast aluminum construction, powder coat finish. Scratch-resistant. Self-closing lid assures protection when not in use. Padlockable. May be mounted to box or device. Includes installation hardware, gasket and multi-lingual instructions. UL listed NEMA 3R rated. Weather resistant cover for double toggle switch applications. Vertical mount. UV-resistant, suitable for outdoor use. Nonmetallic/noncorrosive, won't rust or fade, paintable. UL Marine listed, CSA certified. Die cast zinc with rectangular cover and porcelain sockets. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps, not included. Includes gasket, screws and plugs. UL listed.
Bell Raco 5624-6 Combination Weatherproof Lampholder Hubbell 5624 Weatherproof Combination Lampholder Thomas & Betts E365DR Type T Switch Box
Die cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75 to 150 W maximum, Par-38 lamps, not included. UL listed 1598, cUL. Die-cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75 to 150 W maximum, Par38 lamps, not included. UL listed 1598 C/UL. Nonmetallic threaded switch box with five 1/2 in threaded holes, for exposed applications with nonmetallic wiring systems only. Mounting feet included. 4 in Dia. 13.5 cu-in capacity.
Arrow Hart 1113-SP 3-Hole Weatherproof Outlet Box Bell Raco 5148-0 Weatherproof Device Cover Carlon E9G2DSN-CAR Weatherproof Device Cover
Cast aluminum weatherproof FS boxes - 1-gang FS boxes. Electrostatically painted with a baked, weather-resistant powder finish for exceptional durability. Accept single gang weatherproof cover and standard FS covers. UL listed for wet and damp locations with appropriate cover installed. Mounting lugs provide strength and durability on any mounting surface. Raised knockout studs on back of box provide alternative means for wall mounting. Strike desired studs with sharp hammer blow for clean mounting holes. Easy access ground screw hole located inside back wall of box. Threaded outlets for conduit and connectors. Waterproof protection for outside receptacle. Self-closing lids. Installation hardware, gasket and multi-lingual instructions included. Size: 4-1/2 in W x 4-1/2 in L. cULus UL 514-A listed, CSA and NEMA 3R rated. For two gang duplex receptacles and weatherproof toggle switch applications.
Bell Raco 5157-0 Round Weatherproof Device Cover Bell Raco 5625-7 Combination Weatherproof Lampholder Bell Raco 5625 Combination Weatherproof Lampholder
Powder coat finish and scratch-resistant. Weatherproof protection for outdoor receptacles. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. 2 single, 1-13/32 in Dia receptacle openings. C/UL/US UL 514-A listed, CSA C22.2 No. 18, NEMA 3R Rated. Shrink pack. Die cast zinc with round 4 in cover and porcelain sockets. For wet locations. Use 75 to 150 W maximum, Par-38 lamps, not included. Includes multi-lingual instructions, gasket, screws and plugs. UL listed. Die cast zinc with round 4 in cover and porcelain sockets. For wet locations. Use 75 to 150 W maximum, Par-38 lamps, not included. Includes multi-lingual instructions, gasket, screws and plugs. UL listed.
Bell Raco 5625-2 Combination Weatherproof Lampholder Hubbell 5625 Weatherproof Combination Lampholder Arrow Hart 1116-SP 3-Hole Weatherproof Outlet Box
Die cast zinc with round 4 in cover and porcelain sockets. For wet locations. Use 75 to 150 W maximum, Par-38 lamps, not included. Includes multi-lingual instructions, gasket, screws and plugs. UL listed. Hubbell Combination Cover, Round, Metal, Powder-Coated, Gray, 3.336 in L, 8 in W, 4.125 in H, 4-1/8 in Dia, Includes: (2) Lamp Holders, Gasket, Mounting Hardware Cast aluminum weatherproof FS boxes - 1-gang FS boxes. Electrostatically painted with a baked, weather-resistant powder finish for exceptional durability. Accept single gang weatherproof cover and standard FS covers. UL listed for wet and damp locations with appropriate cover installed. Mounting lugs provide strength and durability on any mounting surface. Raised knockout studs on back of box provide alternative means for wall mounting. Strike desired studs with sharp hammer blow for clean mounting holes. Easy access ground screw hole located inside back wall of box. Threaded outlets for conduit and connectors.
Thomas & Betts E382DE Type T Threaded Switch Box Bell Raco 5625 Combination Weatherproof Lampholder Hubbell 5625 Weatherproof Combination Lampholder
For use with non-metallic wiring systems. Non-conductive, noncorrosive and impact-resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2 in plus four 3/4 in threaded ports. UL listed. Die cast zinc with round 4 in cover and porcelain sockets. For wet locations. Use 75 to 150 W maximum, Par-38 lamps, not included. Includes multi-lingual instructions, gasket, screws and plugs. UL listed. Die cast zinc with round 4 in cover and porcelain sockets. For wet locations. Use 75 to 150 W maximum, Par-38 lamps, not included. Includes multi-lingual instructions, gasket, screws and plugs. UL listed.
Bell Raco 5613 Architectural Lampholder Carlon Code Keeper Red Dot CKNM-NGD Clip-On Weatherproof Cover Halex 77121 Weatherproof Cover
For indoor or outdoor lighting. Die cast zinc construction. Powder coat finish. Scratch resistant. Locking swivel knuckle assures lamp positioning and directional aiming. Porcelain socket, inside gasket. 1/2 in locknut. Multi-lingual instructions. UL Standard 1598 CSA certified C22.2 no. 18 compliant. Shrink wrapped. Accepts GFCI, duplex, switch and up to 1-3/8 in round devices. Nonconductive, noncorrosive and impact resistant. Won't rust or fade. Scratch-resistant. For use in wet/damp locations. Keyhole mounts, loosen the existing device screws and slide the cover over. Comes with adapter plates and pre-adhered gaskets. Wasp guard included to keep out unwanted pests. Lockable for security. UL listed. Corrosion resistant for installation and operation in wet or damp locations. UL listed.
RECEPTACLE/CVR DPLX KIT GRY 1G COVER 2G 2-TOGGLE WP 15A GRAY RECEPTACLE/CVR DPLX KIT WHT 1G
Bell 5839-6WRTR Cover Kit
Our Price: $17.99
For use in wet, damp or dry locations. Die cast aluminum construction. Powder coat finish. Self-closing lids assure weatherproof protection when the receptacle is not in use. One each 125 volt, 15 amp receptacle, single-gang box, installation hardware, cover and gasket included. 2.656" depth x 4.563" height x 2.813" width. cULus Listed, NEMA 3R. Boxed. For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2 in L x 2-3/4 in W. UL listed, CSA, NEMA 3R Rated. Bell Cover Kit, Includes: Box, Cover, Duplex Receptacle, Gasket, Mounting Hardware
COVR W/INLT WP GRY 1G 15A 125V RECEPTACLE/CVR DPLX KIT BRZ 1G Bell Raco 5338-0 Weatherproof Box
Bell 5839-7WRTR Cover Kit
Our Price: $17.99
Eaton Weatherproof Cover, Plastic, Gray, 3/4 in L, 4-3/4 in W, 2.95 in H, NEMA Rating: 5-15P, Horizontal Mounting Bell Cover Kit, Includes: Box, Cover, Duplex Receptacle, Gasket, Mounting Hardware Outdoor electrical box, 4-1/2 in x 4-1/2 in x 2 in deep with lugs. Seven 1/2 in threaded outlets. 31 cu-in capacity. For use outdoors in wet, damp or dry locations. Can be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed in box. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and conduit. Multi-lingual instructions. UL listed. NEMA 3R Rated.
Arrow Hart WIU-1 Self-Closing Weatherproof Cover Raco Rayntite 5775-0 Multi Directional Weatherproof Cover Carlon Code Keeper Red Dot 2CKNM-NG Weatherproof Device Cover
UV-resistant polycarbonate back, see-through self closing cover and pre-mounted gasket protect against rain, sleet and snow without cracking or breaking. Non-corrosive and non-conductive. Snap-in inserts for flexibility. Moveable hinges mount either horizontally or vertically in vinyl, brick, stucco or concrete. Meets and exceeds UL outdoor low voltage landscape lighting requirements. Meets 1999 NEC Article 210-60 (b) for hotels and motels requiring covered receptacles behind beds and 2002 NEC Article 406.8 (B) (1) for receptacles in damp or wet locations. Comes standard with three inserts (for a total of 16 different configurations): duplex, decorator and a toggle/five receptacle opening. Receptacle sizes are 1-1/4 in (31-3/4 mm), 1-3/8 in (34.925 mm), 1-1/16 in (41.275 mm), 1-3/4 in (44.45 mm) and 2-1/8 in (54 mm). 3-1/4 in D x 6.085 in x 4.446 in. UL and cUL listed, meets NEMA 3R requirements. High-impact polycarbonate construction, virtually indestructible, will not rust or corrode. 2-3/4 in depth, 2-gang, pre-configured for GFCI with patented Knockout technology for alternate devices. 55-in-1 multiple combinations of duplex, GFCI, switch and rounds: 1-1/4 in, 1-3/8 in, 1-9/16 in, 1-5/8 in, 1-11/16 in, 1-3/4, 2-1/8 in, 2-1/4 in, 2-7/16 in. Clear lid. Lockable design prevents tampering and accidental disconnects. Tri-lingual instructions. Includes attached gasket and mounting hardware. 5.54 in x 5.43 in. Meets NEC requirements, UL listed. NEMA 3R Rated. Shrink wrapped. Accepts GFCI, duplex, switch and up to 1-3/8 in round devices. Nonconductive, noncorrosive and impact resistant. Won't rust or fade. Scratch-resistant. For use in wet/damp locations. Keyhole mounts, loosen the existing device screws and slide the cover over. Comes with adapter plates and pre-adhered gaskets. Wasp guard included to keep out unwanted pests. Lockable for security. UL listed.
COVER WALLPLATE 1G LP IN-USE COVER IN-USE WP EXP 2-GANG GRY Arrow Hart WIU-2 Self-Closing Weatherproof Cover
Taymac Electrical Box Cover, Number of Gangs: 1, Metal, Gray, 3-1/2 in L, 3.595 in W, 6.492 in H, NEMA Rating: NEMA 3R, Vertical Mounting, Includes: Adapter, Gasket, Mounting Hardware Taymac EXTRA DUTY Electrical Box Cover, Number of Gangs: 2, Polycarbonate/Synthetic Neoprene Rubber, Gray, 3 in L, 5.77 in W, 6.15 in H, NEMA Rating: 3R, Includes: Gasket, Mounting Hardware UV Resistant polycarbonate back, see-through cover and pre-mounted gasket protect devices inside from rain, sleet and snow without cracking or breaking. Non-corrosive and non-conductive. Snap-in inserts provide flexibility. Meets and exceeds UL outdoor low voltage landscape lighting requirements. Meets 1999 NEC Article 210-60 (b) for hotels and motels requiring covered receptacles behind beds, and 2002 NEC Article 406.8 (B) (1) for receptacles in damp or wet locations. Comes standard with three inserts (for a total of 16 different configurations): GFCI, duplex/toggle and toggle/four round in these sizes: 1.25" (31.75mm), 1.375" (34.925mm), 1.625" (41.275mm) and 1.75" (44.45mm). 3.25" deep x 6.445" x 5.575".
Raco Wiegmann RSC060604RC Rainproof Pull Box Enclosure Raco Wiegmann RSC080804RC Rainproof Pull Box Enclosure BOX/FLIP COVER 1G WP GFCI WHT
Bodies and doors fabricated from 16 ga carbon steel. Drip shield top and smooth seamless sides and front. Knockouts are standard on bottom. A slip-on reversible cover is securely fastened with screws located along bottom edge. Bodies and doors fabricated from 16 ga carbon steel. Drip shield top and smooth seamless sides and front. Knockouts are standard on bottom. A slip-on reversible cover is securely fastened with screws located along bottom edge. No gasketing is required. Hasp for padlocking or meter seal is provided. For use in wet, damp or dry locations. Kit is a complete weatherproof installation, includes weatherproof box, cover, GFCI receptacle and multi-lingual instructions. UL Listed. C/UL Compliant.
BOX/FLIP COVER 1G WP GFCI GRY POWER OUTLET BACKYD 1-GFI REC POWER OUTLET 1SWITCH/1GFI RECP
For use in wet, damp or dry locations. Kit is a complete weatherproof installation, includes weatherproof box, cover, GFCI receptacle and multi-lingual instructions. UL listed. cUL compliant. Made of corrosion-resistant galvanized steel with a dark-green finish to match natural landscape. Comes pre-assembled for immediate installation right out of the box. The rolled edge hinged door allows cords to exit freely. Offers a padlock provision to help prevent unauthorized access. Features a 'while-in-use' cover for outdoor use. Rated for 120 V. UL listed. Midwest Electric delivers durable, dependable outdoor power where you need it. From building sites to barns, sheds and back yards, we help you power the great outdoors.
POWER OUTLET BACKYD 2-GFI REC
Midwest Electric delivers durable, dependable outdoor power where you need it. From building sites to barns, sheds and back yards, we help you power the great outdoors.
   
 
1