Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE
Choose a sub category:
STEEL PIPE- GALVANIZED STEEL PIPE-BLACK COPPER TUBING-RIGID
COPPER TUBING-COILS PVC PRESSURE PIPE PVC-DWV PIPE
PVC-SEWER & DRAIN CPVC PIPE / CPVC TUBING ABS PIPE
CORRUGATED DRAIN
Sort By:
1
Genova 3100572 Solid Wall Cold Water Cut Pipe 2 ft Genova 500052 Solid Cut Pipe Genova 300 Cold Water Pressure Pipe 10 ft
Charlotte Pipe Pipe, Nominal Size: 1/2 in, 2 ft L, 600 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Cut Pipe, Nominal Size: 1/2 in, 5/8 in Dia Outside, 2 ft L, CPVC Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 1/2 in, 10 ft L, 315 psi, PVC
PIPE PLN END SCH 40 1/2INX5FT Genova 300 Pipe Genova 3100772 Solid Wall Cold Water Cut Pipe 2 ft
Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 1/2 in, 10 ft L, 600 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Pipe, Nominal Size: 3/4 in, 2 ft L, 480 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White
Genova 31007 Cold Water Pressure Pipe 10 ft Genova 500072 Solid Cut Pipe PIPE PLN END SCH 40 3/4INX5FT
Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 1-1/20 in Dia Outside, 10 ft L, 200 psi, Schedule Rating: SDR 21, PVC, White Charlotte Pipe Cut Pipe, Nominal Size: 3/4 in, 7/8 in Dia Outside, 2 ft L, CPVC
Genova 300 Pipe Genova 3101072 Solid Wall Cold Water Cut Pipe 2 ft Genova 700 Dwv Cut Pipe
Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 3/4 in, 10 ft L, 480 psi, Schedule Rating: SCH 40, PVC Charlotte Pipe Pipe, Nominal Size: 1 in, 2 ft L, 450 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Cut Pipe, Nominal Size: 1-1/2 in, 2 ft L, 330 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White
Genova 3101172 Solid Wall Cold Water Cut Pipe 2 ft Genova 31010 Cold Water Pressure Pipe 10 ft PIPE PLAIN END SCH 40 1INX5FT
Charlotte Pipe Pipe, Nominal Size: 1-1/4 in, 2 ft L, 370 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 1 in, 10 ft L, 200 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 21, PVC
Genova 500 Pipe PIPE PLN END SCH40 1-1/4INX5FT Genova 300 Pipe
Cresline CPVC Flowguard Gold? pipe is produced using specially formulated CPVC 4120 Flowguard Gold material to meet or exceed ASTM D2846 standards and is NSF-approved for drinking water use. CPVC Flowguard Gold pipe is tan in color with a yellow stripe and is available in plain end. Charlotte Pipe Pipe, Plain End, Solid Wall, 1 in Nominal, 10 ft Length, 450 psi Pressure, SCH 40 Schedule, PVC
Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft DRAIN PIPE PERF FLEX 4INX8FT
Charlotte Pipe Pipe, Bell End, Nominal Size: 1/2 in, 20 ft L, Schedule Rating: SCH 40, PVC Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1/2 in, 0.84 in Dia Outside, Wall Thickness: 0.062 in, 20 ft L, 315 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 13.5, PVC Exceeds ASTM standards and is made with no-break copolymers for professional-grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30% higher load-bearing rating than standard corrugated pipe. Perforated pipe with sock is ideal for French drain application in fine soil. Fittings available to adapt to 3 or 4 in, corrugated pipe and 4 in PVC. Ideal for tight spaces and curvy places, taping joints is not necessary. This pipe has spaced slits, so water drains in stages. It's also ideal for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
DRAIN PIPE SOLID FLEX 4INX8FT Cardel 1/2X2 Copper Tubing Genova 30007 Cold Water Pressure Pipe 20 ft
Great for diverting water from one place to another, water will not seep out until it reaches the end of the pipe. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3/4 in, 20 ft L, 200 psi, Schedule Rating: SCH 21, PVC
Genova 700 Dwv Cut Pipe PIPE DWV SCH 40 1-1/2IN X 5FT Genova 700 Cellular Core Solvent Weld Dwv Pipe
Charlotte Pipe Cut Pipe, Nominal Size: 2 in, 2 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Pipe, Cellular Core, Foam Core, Plain End, Nominal Size: 1-1/2 in, 10 ft L, Schedule Rating: SCH 40, PVC
Genova 31011 Cold Water Pressure Pipe 10 ft Cardel Industries RC2510 Copper Tubing Genova 300 Pipe
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Streamline Copper Tubing, 10 ft L, General-Purpose, Copper Pipe Shape: Coil, 1/4 in Dia Outside, Copper JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
Genova 500 Pipe Genova 300 Cold Water Pressure Pipe 20 ft Genova 700 Pipe
Cresline CPVC Flowguard Gold? pipe is produced using specially formulated CPVC 4120 Flowguard Gold material to meet or exceed ASTM D2846 standards and is NSF-approved for drinking water use. CPVC Flowguard Gold pipe is tan in color with a yellow stripe and is available in plain end. Charlotte Pipe Pipe, Bell End, Nominal Size: 3/4 in, 1.05 in Dia Outside, Wall Thickness: 0.113 in, 20 ft L, 480 psi, Schedule Rating: SCH 40, PVC, White JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
Cardel 12033 Copper Tubing Genova 700 Cellular Core Solvent Weld Dwv Pipe Cardel 1/2X2 Copper Tubing
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. PVC SCH 40 is highly durable, with high tensile and impact strength. It is easy to install and has better sound deadening qualities than PVC SCH 40 DWV foam core. Installation requires the use of primer and solvent cement. For pressure applications, sharply angled pressure fittings must be used. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Cardel 3/4X2 Copper Tubing Genova 31012 Cold Water Pressure Pipe 10 ft Hancor HY-PF1-04-0010 Perforated Single Wall Pipe
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Heavy-duty pipe is ideal for field drainage, foundation or window well drainage, downspout or landscape and pond overflow.
Hancor 04540010H Solid Single Wall Pipe Genova 30010 Cold Water Pressure Pipe 20 ft Genova Products 80011F ABS-DWV Foam Core Pipe
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1 in, 1.315 in Dia Outside, Wall Thickness: 0.063 in, 20 ft L, 200 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 21, PVC JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection.
Hancor 04020010H Drain Pipe PIPE DWV SCH 40 2IN X 5FT Genova 300 Cold Water Pressure Pipe 20 ft
PIPE DWV SCH 40 2IN X 5FT
Our Price: $13.99
Our channel-flow pipe is used as the distribution pipe in conventional gravel-filled leach fields. Charlotte Pipe Pipe, Type 1, Plain End, Solid Wall, Nominal Size: 1/2 in, 20 ft L, 850 psi, Schedule Rating: SCH 80, PVC, Gray
Cardel Industries 1/2X5 Copper Tubing Genova 700 Pipe Genova 300 Cold Water Pressure Pipe
Mueller Copper Tubing, Type M, 1/2 in Nominal, 5 ft Length, Copper Charlotte Pipe Pipe, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 10 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1-1/4 in, 1.66 in Dia Outside, Wall Thickness: 0.064 in, 20 ft L, 160 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 26, PVC
Genova 400 Perforated Solvent Weld Sewer and Drain Pipe Genova 300 Cold Water Pressure Pipe 20 ft Genova 700 Dwv Cut Pipe
JM Eagle's makes PVC ASTM D3034 SDR 35 sewer pipe in 10 and 20 ft lengths, bell end, in 3, 4 and 6 in Dia and PVC ASTM D2729 drain pipe in 10 ft lengths, bell end, in 3, 4 and 6 in Dia. They are available perforated and non-perforated. Solvent weld joints are designed to provide a rigid (or restrained) joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1 in, 20 ft L, 450 psi, Schedule Rating: SCH 40, PVC Charlotte Pipe Cut Pipe, Nominal Size: 3 in, 2 ft L, 260 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White
Genova Products 80021F ABS-DWV Foam Core Pipe Genova Products 560010 CPVC Pipe Cardel Industries 1/2X5 Copper Tubing
JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection. Cresline Pipe, Nominal Size: 1 in, 1-1/8 in Dia Outside, Wall Thickness: 0.102 in, 10 ft L, Plain Connection, 100 psi, CPVC Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Cardel 3/4X2 Copper Tubing Genova 300 Cold Water Pressure Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe
Mueller Copper Tubing, Type L, 3/4 in Nominal, 2 ft Length, Copper Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1-1/2 in, 1.9 in Dia Outside, Wall Thickness: 0.073 in, 20 ft L, 160 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 26, PVC Charlotte Pipe Pipe, Foam Core, Plain End, 1-1/2 in Nominal, 1.9 in OD, 0.145 in Wall Thickness, 20 ft Length, <140 deg F Operating, SCH 40 Schedule, PVC, White
Genova 700 Dwv Cut Pipe Genova 40040 Solid Sewer Pipe Genova 300 Cold Water Pressure Pipe 20 ft
Charlotte Pipe Cut Pipe, Nominal Size: 4 in, 2 ft L, 220 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Sewer and Drain Pipe, Bell End, Nominal Size: 4 in, 4.215 in Dia Outside, Wall Thickness: 0.075 in, 10 ft L, Operating Temperature: 32 to 140 deg F, PVC, White Charlotte Pipe Pipe, Bell End, Nominal Size: 1-1/4 in, 1.66 in Dia Outside, Wall Thickness: 0.14 in, 20 ft L, 370 psi, Schedule Rating: SCH 40, PVC, White
Genova 40041 Perforated Sewer Pipe Cardel Industries 12035 Copper Tubing Namasco GALV-1/2 Steel Pipe
Charlotte Pipe Pipe, Bell End, 4 in Nominal, 4.215 in OD, 0.075 in Wall Thickness, 10 ft Length, 140 deg F Operating, PVC DWV, White Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only.
Cambridge-Lee 1/2X10M Type M Water Tube Genova 400 Solid Solvent Weld Sewer and Drain Pipe Cardel 12039 Copper Tubing
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Charlotte Pipe Sewer and Drain Pipe, Bell End, Nominal Size: 3 in, 3-1/4 in Dia Outside, Wall Thickness: 0.07 in, 10 ft L, Operating Temperature: 32 to 140 deg F, PVC, White Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
DRAIN PIPE PERF FLEX 4INX25FT DRAIN PIPE SOLID FLEX 4INX25FT Genova 700 Solvent Weld Dwv Pipe
Exceeds ASTM standards and is made with no-break copolymers for professional-grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30% higher load-bearing rating than standard corrugated pipe. Perforated pipe with sock is ideal for French drain application in fine soil. Fittings available to adapt to 3 or 4 in, corrugated pipe and 4 in PVC. Ideal for tight spaces and curvy places, taping joints is not necessary. This pipe has spaced slits, so water drains in stages. It's also ideal for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable. Great for diverting water from one place to another, water will not seep out until it reaches the end of the pipe. Charlotte Pipe Pipe, Plain End, Nominal Size: 1-1/2 in, 1.9 in Dia Outside, Wall Thickness: 0.145 in, 20 ft L, Operating Temperature: <140 deg F, Schedule Rating: SCH 40, PVC, White
Genova 700 Cellular Core Solvent Weld Dwv Pipe Cardel Industries 3/4X5 Copper Tubing Namasco .25X10B Steel Pipe
Charlotte Pipe Pipe, Cellular Core, 3 in Nominal, 3-1/2 in OD, 0.216 in Wall Thickness, 10 ft Length, 32 to 140 deg F Operating, SCH 40 Schedule, PVC, White Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Genova 400 Solid Solvent Weld Sewer and Drain Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 30012 Cold Water Pressure Pipe 20 ft
Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 4 in, 10 ft L, Schedule Rating: SCH 35, PVC, Green Charlotte Pipe Pipe, Foam Core, Plain End, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 20 ft L, Operating Temperature: <140 deg F, Schedule Rating: SCH 40, PVC, White JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
Genova 300 Cold Water Pressure Pipe 20 ft Namasco BLACK-1/2 Pipe Genova 400 Perforated Solvent Weld Sewer and Drain Pipe
Charlotte Pipe Pipe, Nominal Size: 1-1/2 in, 20 ft L, 330 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
Cardel Industries RC5010 Copper Tubing Genova 700 Solvent Weld Dwv Pipe Namasco .25X10G Steel Pipe
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Charlotte Pipe Pipe, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 20 ft L, 280 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only.
Cardel RC2520 Copper Tubing Genova 300 Cold Water Pressure Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Charlotte Pipe Pipe, Bell End, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.091 in, 20 ft L, 160 psi, Operating Temperature: 140 deg F, PVC, White Charlotte Pipe Pipe, Cellular Core, Foam Core, Plain End, Nominal Size: 4 in, 10 ft L, Schedule Rating: SCH 40, PVC
Cardel 3/4X5 Copper Tubing Cambridge-Lee 1/2X10L Type L Water Tube Cardel Industries RC3810 Copper Tubing
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Genova 700 Pipe Genova 30022 Cold Water Pressure Pipe 20 ft Namasco .375X10B Steel Pipe
JM Eagle's wide line of solvent weld pipe includes PVC schedule 30 and 40 in solid wall and schedule 40 in cellular-core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, schedule 30 pipe is available in 3-1/4 in Dia and schedule 40 is available in 1/2 through 16 in Dia. Schedule 40 cellular-core is available in 1-1/2 through 12 in Dia. DWV pipe comes in 10 and 20 ft lengths in plain and bell end. Charlotte Pipe Sewer and Drain Pipe, Bell End, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.113 in, 20 ft L, 200 psi, Schedule Rating: SCH 40, SDR 21, PVC Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.
Cardel 12045 Copper Tubing Namasco BLACK-3/4 Pipe Namasco GALV-3/4 Steel Pipe
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only.
Namasco GALV-1 Steel Pipe Namasco .375X10G Steel Pipe Genova Products 80031F ABS-DWV Foam Core Pipe
Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Charlotte Pipe ABS Plus Pipe, Foam Core, Plain End, Nominal Size: 3 in, 3-1/2 in Dia Outside, Wall Thickness: 0.216 in, 10 ft L, DWV Connection, Schedule Rating: SCH 40, ABS, Black
6X10 SOLID SEWER PIPE Namasco BLACK-1 Steel Pipe Cambridge-Lee 3/4X10M Type M Water Tube
Charlotte Pipe Drain Pipe, Nominal Size: 6 in, 6-11/40 in Dia Outside, 10 ft L, PVC Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Cardel Industries RC3820 Copper Tubing Genova 300 Cold Water Pressure Pipe 20 ft DRAIN PERF FLEX W/SOCK 4X25FT
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Charlotte Pipe Pipe, Bell End, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 20 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Exceeds ASTM standards and is made with no-break copolymers for professional-grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30% higher load-bearing rating than standard corrugated pipe. Perforated pipe with sock is ideal for French drain application in fine soil. Fittings available to adapt to 3 or 4 in, corrugated pipe and 4 in PVC. Ideal for tight spaces and curvy places, taping joints is not necessary. This pipe has spaced slits, so water drains in stages. It's also ideal for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
Cardel Industries RC5810 Copper Tubing Genova 700 Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Charlotte Pipe Pipe, Nominal Size: 4 in, 4-1/2 in Dia Outside, Wall Thickness: 0.237 in, 10 ft L, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Pipe, Cellular Core, Plain End, Nominal Size: 3 in, 3-1/2 in Dia Outside, Wall Thickness: 0.216 in, 20 ft L, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White
Genova 400 Perforated Sewer and Drain Pipe With Green Gasket Cardel Industries 1/2X20M Copper Tubing Genova Products 80041F ABS-DWV Foam Core Pipe
Charlotte Pipe Pipe, Bell End, Nominal Size: 4 in, 4.215 in Dia Outside, Wall Thickness: 0.12 in, 14 ft L, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, Green Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection.
Cambridge-Lee 3/4X10L Type L Water Tube Namasco 1.25X10B Steel Pipe Namasco 1.25X10G Steel Pipe
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only.
Namasco BLK 1/2 Steel Pipe Cardel Industries RC5020 Copper Tubing Genova 700 Dual Pressure/Drain Waste Vent Pipe
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3 in, 20 ft L, 260 psi, Schedule Rating: SCH 40, PVC
Genova 300 Cold Water Pressure Pipe Genova 700 Solvent Weld Dwv Pipe 2X20SCH80 PR.PIPE(GRY) NOBELL
JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. Charlotte Pipe Pipe, Nominal Size: 3 in, 3-1/2 in Dia Outside, Wall Thickness: 0.216 in, 20 ft L, 260 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Charlotte Pipe Pipe, Plain End, Solid Wall, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.218 in, 20 ft L, 400 psi, Operating Temperature: 23 deg C, Schedule Rating: SCH 80, PVC, Gray
Cardel Industries REF-1/4 Refrigeration Copper Tubing Namasco 1.5X10G Steel Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Charlotte Pipe Pipe, Nominal Size: 4 in, 4-1/2 in Dia Outside, Wall Thickness: 0.237 in, 20 ft L, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White
Cardel Industries 1/2X20L Copper Tubing Genova 400 Solid Solvent Weld Sewer and Drain Pipe Namasco 1.5X10B Steel Pipe
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Charlotte Pipe Pipe, Bell End, Nominal Size: 6 in, 6 in Dia Outside, 10 ft L, PVC, Green Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.
Genova 700 Dwv Pipe Namasco GALV 1/2 Steel Pipe Cardel Industries REF-1/8 Refrigeration Copper Tubing
Lightweight, high impact-resistant and corrosion-proof, resistant to all waste system liquids and gases. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Cardel Industries 01075 Copper Tubing Namasco 2X10G Steel Pipe Genova 70042FB DWV Pipe
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Lightweight, high impact-resistant and corrosion-proof, resistant to all waste system liquids and gases.
Namasco BLK 3/4 Steel Pipe Genova 700 Solvent Weld Dwv Pipe Cardel Industries 3/4X20M Copper Tubing
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Charlotte Pipe Pipe, Plain End, Nominal Size: 6 in, 6-5/8 in Dia Outside, Wall Thickness: 0.28 in, 10 ft L, 190 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Genova 70042B DWV Pipe Cardel Industries RC5820 Copper Tubing Genova 700 Solvent Weld Dwv Pipe
Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 4 in, 20 ft L, 220 psi, Schedule Rating: SCH 40, PVC Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. JM Eagle's wide line of solvent weld pipe includes PVC Schedule 30 and 40 in solid wall and Schedule 40 in cellular core. Solvent weld joints are designed to provide a rigid (or restrained) joint connection in a solid core, Schedule 30 pipe is available in 3-1/4 in Dia, and Schedule 40 is available in 1/2 in through 16 in Dia. Schedule 40 cellular core is available in 1-1/2 in through 12 in Dia. DWV pipe comes in 10 ft and 20 ft lengths in plain and bell end.
Cardel REF-3/16 Refrigeration Copper Tubing Cardel Industries REF-3/8 Refrigeration Copper Tubing Namasco 2X10B Steel Pipe
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.
Namasco GALV 3/4 Steel Pipe Cardel Industries REF-5/16 Refrigeration Copper Tubing Hancor 04010100 Perforated Regular Single Wall DWV Pipe 100 ft
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Our heavy-duty pipe for use in non-pressure drainage applications. Made of high-density polyethylene. CSA approved.
Hancor 04510100 Regular Solid Single Wall Pipe 100 ft Genova 400 Solid Sewer and Drain Pipe With Green Gasket Cardel Industries 3/4X20L Copper Tubing
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Charlotte Pipe Pipe, Nominal Size: 6 in, 6.275 in Dia Outside, Wall Thickness: 0.18 in, 14 ft L, Operating Temperature: 32 to 140 deg F, PVC, Light Green Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals.
Genova 300 Cold Water Pressure Pipe Hancor 04020100H 3-Hole Channel Flow Perforated Single Wall Pipe 100 ft Cardel Industries REF-1/2 Refrigeration Copper Tubing
JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. Our channel-flow pipe is used as the distribution pipe in conventional gravel-filled leach fields. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Cardel Industries 1/4X60L Copper Tubing Hancor 03510100 Regular Solid Single Wall Pipe 100 ft Namasco BLK 1 Steel Pipe
Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Our heavy-duty pipe for use in non-pressure drainage applications. Made of high-density polyethylene. CSA approved. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.
Hancor 04730100BS Perforated/Wrap Regular Single Wall Pipe 100 ft Namasco GALV 1 Steel Pipe Cardel Industries 01082 Copper Tubing
PIPE STEEL GALV 1INX21FT
Our Price: $129.99
Our 4 in single-wall corrugated HDPE pipe is ideal for drainage projects where flexibility, light weight and low cost are important. The pipe is perforated for subsurface water collection or leaching and wrapped with a non-woven, synthetic wrap material that allows water to flow through, but keeps sand and soil from blocking the pipe. The 100 ft roll of pipe allows installation of long runs with fewer joints. Meets ASTM F405 standards. CSA approved. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Streamline? pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of pipe products to support most all plumbing supply and DWV applications, Streamline? pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? pipe the preferred and specified brand of industry professionals.
Cardel Industries REF-5/8 Refrigeration Copper Tubing Namasco BLK 11/4 Steel Pipe Genova 700 Solvent Weld Dwv Pipe
Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Cardel Industries 3/8X60L Copper Tubing Namasco BLK 11/2 Steel Pipe Namasco GALV 11/4 Steel Pipe
Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only.
Cardel Industries 01095 Copper Tubing Namasco GALV 11/2 Steel Pipe Cardel Industries REF-3/4 Refrigeration Copper Tubing
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only. Streamline? copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline? Nitrogenized? ACR copper tube is pressurized with nitrogen to provide maximum protection against the formation of harmful oxides normally formed during brazing operations. Reduction of these oxides greatly reduces system contamination. Streamline? refrigeration service tube is of a consistent dead soft temper, bright, thoroughly dried or dehydrated and packed in shrink wrapping plus individual cartons for the highest level of protection.
Cardel Industries 1/2X60L Copper Tubing Namasco BLK 2 Steel Pipe Namasco GALV 2 Steel Pipe
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only.
Cardel 01108 Copper Tubing Cardel Industries 1/2X60K Copper Tubing Cardel Industries 3/4X60L Copper Tubing
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals.
Cardel Industries 01115 Copper Tubing Cardel Industries 3/4X60K Copper Tubing Cardel Industries 1X100 Copper Tubing
Streamline? copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline? copper pipe is available in all common types including K-type, L-type, M-type and DWV. Each piece of pipe is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper pipe the preferred and specified brand of industry professionals. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals.
   
 
1