Home > HARDWARE > WINDOW & DOOR HARDWARE > BARN DOOR HARDWARE
Choose a sub category:
BARN DOOR TRACK / BRACKETS BARN DOOR HANGERS BARN DOOR GUIDES
BARN DOOR PULLS / LATCHES
Sort By:
1
Stanley 193839 Round Rail Track End Cap Stanley 235309 Open Bar Holder Stanley 235291 Closed Bar Holder
With bolt, nut and washer. Pack loose. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
Stanley 351503 Open Bar Holder Stanley 351502 Closed Bar Holder National Hardware V6 Extra Heavy Door Pull
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Black, Steel, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws
National Hardware V6 Extra Heavy Door Pull Stanley 104331 Single Side Bracket Stanley 100834 Door Bumper
National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Steel, Zinc, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed. Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.
PULL DOOR GALV 6-3/4IN        Stanley 51L2 Double Triangle Bracket National Hardware V6 Extra Heavy Door Pull
National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Galvanized Steel, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. Safe working load. National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, White, Steel, Vinyl-Coated, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws
Stanley 104380 Splice Bracket Stanley DP5421BC Single Round Rail Splice Bracket Stanley 100875 Adjustable Reversible Stay Roller
Designed to join two pieces of Stanley's 105270, 105676, 105213 and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags. Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lb. Without screws. Each loose.
Stanley 131490 Adjustable Reversible Stay Roller TRUCK-BOX RAIL ZN             HANGER BOX RAIL ZINC PLATED
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4 in thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed. Packed with wheel trucks only. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. Suitable for use with No 59, 5100, 5103, 5104, 5105, 5110, 5114 or 5116 box rail. 225 lb/hanger safe working load, 2.14 in diameter. 4.15 in L x 3 in W x 1.61 in D. Standards: BHMA A138.18 specified. National Hardware COLORmaxx Single Axle Box Rail Hanger, Specifications: 150 Safe Working Load, Steel, Zinc, Dimensions: 3.12 in L x 2.149 in W x 1.5 in H
Stanley 131706 Single Adjustable Door Guide Stanley 161760 Cam Latch Stanley 160754 Cam Latch
Extra-wide guides are designed for corrugated metal-clad doors, can be used as a door stop when mounted sideways. Curved section of guide may be turned sideways allowing straight access when installing screws. Fasteners are not included. Guides have holes for spikes as well as larger holes for 3/8 in lag screw mounting. Guide is adjustable for doors up to 5-1/2 in thick. Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7 in hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. Boxed. Boxed.
Stanley 348052 Center Latch Stanley 51EDBC Box Rail End Cap HANGER BOX RAIL ZINC PLATED
National Hardware Center Latch, Heavy Duty, Zinc Plated Designed to press into rail to keep rail free of foreign materials from birds or weather. Can be used as center stop using 3/8 x 2 in carriage bolts (not furnished). Often packed with box hangers. National Hardware Box Rail Hanger, 225 lb Weight, Dimensions: 4.62 in W x 6 in H, Steel, Zinc
Stanley 185447 Center Latch National Hardware DP51MSB Single Box Rail Splice Bracket National Hardware 5001 Box Rail Hanger
Designed for bi-parting wood sliding doors at least 1-1/2 in thick. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. 15 in long hook. Boxed. Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12 in L x 3.25 in W x 2 in D. Can be used with flashing with the 5151 flashing bracket. One splice bracket should be installed on every length of rail to lock it in place. Designed for use with box rail. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Includes truck, connecting bolt and nuts. Packed without end caps. Made of durable one-piece, precision-formed steel. Comes with self-lubricating Delrin bearings. Safe working load - 225 lb per hanger. 2.14 in roller diameter. 4-1/2 in bolt length, 4.49 in overall length, 1.61 in overall height. BHMA A138.18.
HANGER BOX RAIL W/5-1/2IN BOLT HANGER BOX RAIL W/6IN BOLT    Stanley 5414BC Double Round Rail Bracket
National Hardware Box Rail Hanger, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rail, Includes: Connecting Bolt and Nuts, Truck National Hardware Rail Hanger, 6 in, 225 lb Weight, Dimensions: 2 in L x 3 in W x 2 in H, Steel, Zinc, Suitable for: Model #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rail, Includes: Truck, Connecting Bolt, Nuts Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, (2) carriage bolts and (2) nuts. (1) Bracket should be installed every 2 ft of rail. Suitable for use on corrugated metal siding due to narrow mounting surface.
TRUCK ROUND RAIL W/STEEL WHEEL Stanley 264879 Astragal Rail HANGER BOX RAIL W/6IN BOLT
National Hardware Rail Hanger, 300 lb Weight, Dimensions: 19 in L x 14 in W x 9 in H, Steel, Zinc Designed to cover the gap between bi-parting doors. Design allows it to wrap around the flashing channel of the vertical. Fits both TAB-LOC and EASY-FRAME door verticals and attaches with pop rivets. Can be installed before or after doors are hung. Boxed. National Hardware Box Rail Hanger, 300 lb Weight, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114, #5116 Box Rail, Includes: 6 in Bolts, Nuts
HANGER BOX RAIL W/4-1/2IN BOLT Stanley 112102 Trolley Rail Hanger Stanley 173708 Guide Rail Bracket
National Hardware Rail Hanger, 300 lb Weight, Bearing Type: Roller, Roller Width: 1.61 in, Roller Diameter: 2.14 in, Shaft Diameter: 0.42 in, Steel, Zinc, Dimensions: 5.38 in L x 4.51 in W x 1.61 in H, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rails Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed. Designed to attach #6004 guide rail. Slotted hole in each leg allows for both lateral and vertical adjustments. Bolts, nuts and washers are included for easy attachment.
HANGER ROUND RAIL W/5IN BOLT  Stanley 174268 Rail Hanger Stanley 193714 Round Rail Hanger
National Hardware Rail Hanger, 5 in, 300 lb Weight, Steel, Zinc Designed for use on wood-frame, metal-clad doors using a 2 x 4 in or 2 x 6 in frame with Stanley's 105270, 105676, 105213 and 105726 box rail. Includes two washers, 4 hex nuts and two end caps per pair. Made of durable one-piece, precision-formed steel. Offers self-lubricating Delrin bearings. The 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusted laterally 1 in by turning offset bolt for desired clearance. Can hold 450 lb per pair. 9 in bolt. Boxed. Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts door vertically and laterally (1 in) from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe working load - 300 lb per hanger.
Stanley 193656 Round Rail Hanger Stanley 145581 Flexible Door Hanger Stanley 168815 Track Hanger
Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts door vertically and laterally (1 in) from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe working load - 300 lb per hanger. Designed for use with box rail on wood-frame or metal clad doors using a 2 x 4 in or 2 x 6 in frame. For use with #5100 or #5103 box rail. Packed with two washers, 4 hex nuts and two end caps per pair, also contains two #5151 flashing brackets. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6 in adjusts laterally 1 in by turning offset bolt for desired clearance. Safe Working Load - 225 lb per hanger. 9 in bolt. Flexible with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 to 2 in Thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pounds capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
Stanley 174284 Rail Hanger Stanley 131565 Adjustable Door Guide Stanley 112359 Flexible Door Hanger
Designed for use with box rail on wood-frame, metal-clad door using a 2 x 4 in or 2 x 6 in frame. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Packed with four washers, four hex nuts and two end caps per pair. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusts laterally 1 in by turning offset bolt for desired clearance. Durable one-piece, precision formed steel. Each hardened axle has 12 hardened and precision-ground alloy steel roller-bearings. Delrin seals keep out dirt while holding in long-life grease. Safe working load - 300 lb per hanger. 9 in bolt. Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6 in x 6 in post. 1/2 in rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed. Designed for use with box rail on wood-frame or metal clad doors using a 2 x 4 in or 2 x 6 in frame. For use with #59 or #5110 box rail. Packed with two washers, 4 hex nuts and two end caps per pair, seventeen 3/8 x 2-1/2 in lag bolts also are included for mounting rail. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6 in adjusts laterally 1 in by turning offset bolt for desired clearance. Safe working load - 225 lb per hanger. 9 in bolt.
Stanley 105676 Rail Track HANGER BX RAIL ZINC PLATED    HANGER BOX RAIL FLEX ZINC PLTD
Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed for use with box rail on wood-frame sliding doors from 1-1/2 to 2 in Thick. For use with #5114 and #5116 box rail. Packed with bolts for attaching door straps. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. Double door strap has opposing holes for bolt mounting. Safe working load - 225 lb. per hanger. National Hardware Box Rail Hanger, 225 lb Weight, Mounting Hole Size: 1/2 in, Dimensions: 4.51 in W, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114, #5116 Box Rail, 1-1/2 to 2 in Thick Sliding Frame Doors, Includes: (2) End Caps, Bolts
Stanley 51HBC Double Box Rail Bracket Stanley 112128 Trolley Rail Hanger Stanley 112458 Flexible Door Hanger
Designed to support a double run of #5114 or #5116 box rail. 1 Bracket should be installed every 2 ft of rail. Includes lag bolt. 300 lb. Safe working load. Rigid with 2-51F and 1-51G brackets with lag. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 1 pair 5005 box rail hangers, 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Designed for use with box rail on wood-frame sliding doors from 1-1/2 to 2 in Thick. For use with #59 or #5110 box rail. Packed with nine 3/8 x 2 in lag screws for mounting rail and two end caps. Hangers have vertical and lateral adjustments that can be made from outside building. Durable one-piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt is threaded 5-1/2 in with a lateral adjustment of 1 in by turning bolt. Safe working load - 225 lb. per hanger.
HANGER BOX RAIL ZINC PLATED   Stanley 105726 Rail Track Stanley 261602 Flashing Bracket
National Hardware Box Rail Hanger, 300 lb Weight, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114, #5116 Box Rail, 1-1/2 to 2 in Thick Sliding Frame Doors, Includes: (2) End Caps, Bolts Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. With slots for 5120 flashings. Boxed loose.
Stanley 193847 Round Rail Splice Collar Stanley 5415BC Double Round Rail Bracket Stanley 193730 Round Rail Hanger
Designed for use with #5430, #5433, #5460 and #5465 round rail. Unique collar design supports the end of two rails while not interfering with flat mounting surface of rail. Fasteners are not required. Can be installed after rail is mounted to building. Rail bracket spacing holds collar in place. Designed to be used with #5400 round rail to join and hold two double lengths of rail together for bi-passing doors. Includes lag bolt, two carriage bolts and two nuts. Suitable for use on corrugated metal siding due to narrow surface. Adjustable to bring rail closer or further away from building. safe working load 300 lb. 600 lb capacity. Pair flexible with door strap. Boxed.
Stanley 105213 Rail Track BRACKET SPLICE DOUBLE BOX GALV Trackmaster 5400 Plain Round Barn Door Rail
Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. National Hardware Box Rail Bracket, Double, 300 lb Weight, Dimensions: 4-25/32 in L x 1-3/4 in W x 8-1/16 in H, Steel, Galvanized, Suitable for: #5114, #5116 Box Rail, Includes: Lag Bolt, (2) 3/8 x 2 in, Lag Screws Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel.
RAIL FACE MOUNT BOX GALV 8FT  Trackmaster 5400 Plain Round Barn Door Rail Stanley 105270 Rail Track
National Hardware Face Mount Box Rail, 8 ft L, Door Weight: 450 lb, Steel, Galvanized Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
National Hardware DP51MBC Single Box Rail Bracket RAIL FACE MOUNT BOX GALV 10FT Stanley 131458 Adjustable Door Bumper
Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12 in L x 3.25 in W x 2 in D. Can be used with flashing with the 5151 flashing bracket. National Hardware Face Mount Box Rail, 10 ft L, Door Weight: 450 lb, Steel, Galvanized Adjustable from 2-1/2 in to 3-1/8 in. Pack loose.
Stanley DP5420BC Single Round Rail Bracket Stanley 104752 Adjustable Wall Mount Splice Bracket Trackmaster 5400 Plain Round Barn Door Rail
Designed to be used with #5400 round rail to mount rail to side of building. Includes lag bolt. (1) Bracket should be installed every 2 ft of rail. Safe working load 300 lb. National Hardware Double Splice Bracket, Specifications: 300 lb Working Capacity, Steel, Galvanized, Suitable for: #5114 or #5116 Double Run Box Rail, Includes: (2) Carriage Bolts, (4) Lag Bolts and (2) Nuts Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel.
Stanley 51K Triple Box Rail Bracket RAIL FACE MOUNT BOX GALV 12FT Stanley 194001 Round Snap-On Track Flashing Bracket
Designed to support a triple run of #5114 or #5116 box rail. Includes two lag bolts. 1 Bracket should be installed every 2 ft of rail. Can be used for triple bi-passing doors. Can also be used without middle bracket for 3-1/2 in bi-passing doors. 300 lb. Safe working load. National Hardware Face Mount Box Rail, 12 ft L, Door Weight: 450 lb, Steel, Galvanized Designed for use on doors 1 in Thick with National #5430/5433 Trackmaster round rail and #5450/5455 flashing. Boxed loose.
Stanley 193946 Round Face Mount Rail Bracket Stanley 142364 Box Rail Stanley 193953 Round Face Mount Rail Bracket
With mounting brackets, 600 pound capacity. Pack loose. Includes mounting/flashing brackets which are welded to the rail on 2 ft centers. Intended for doors weighing up to 450 lb per panel. Boxed loose. With mounting brackets, 600 pound capacity. Pack loose.
Stanley 174110 Box Rail Stanley 142117 Top Mount Rail Bracket Stanley 193961 Round Face Mount Rail Bracket
Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2 x 6 in track board with 2-1/2 in ring shank nails with neoprene washer. Includes mounting/flashing brackets which are welded to the rail on 2 ft centers. Intended for doors weighing up to 450 lb per panel. Boxed loose. With mounting brackets, 600 pound capacity. Pack loose.
Stanley 142158 Top Mount Rail Bracket Stanley 104786 Adjustable Wall Mount Box Rail Bracket Stanley 106195 Covered Rail
Includes mounting/flashing brackets which are welded to the rail on 2 ft centers. Intended for doors weighing up to 450 lb per panel. Boxed loose. Designed for mounting a double run of #5114 or #5116 box rail. Includes 4 lag bolts, 2 carriage bolts and 2 nuts. Suitable for use on corrugated metal siding due to narrow mounting surface. 1 bracket should be installed every 2 feet of rail. Adjustable to bring rail closer or further away from building. Can be used with flashing with the 5151 flashing bracket. 300 lb. safe working load. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant.
Stanley 106112 Covered Rail Stanley 106120 Covered Rail Stanley 174136 Box Rail
Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Side-mounted rail designed for use on doors up to 450 lb. Cover is spot welded to top of rail with weld spots painted to prevent rusting. Brackets are not required since the cover provides a continuous bracket. Rail can be mounted with lag screws. Weather resistant. Designed for doors weighing up to 450 lb. One-piece, mounted design allows fast, simple installations without mounting brackets. Features a durable, white prefinished cover that is permanently welded to rail. Flashing pre-punched for attaching to 2 x 6 in track board with 2-1/2 in ring shank nails with neoprene washer.
   
 
1