|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP grout and tile brush features nylon bristles that work on all grout joint widths. The comfortable handle features a thumb rest to improve leverage and reduce fatigue. On the opposite side of the bristles, a square edge can be used for scraping when you turn the brush over. This multi-purpose brush performs masterfully on grout and tile and any other job including the house, patio, garage, car, camper, boat, motorcycle or trailer.
|
The QEP thinset removal tool is designed to clear the thinset that comes up into the grout joint when the tiles are set in place prior to grouting and to reduce final clean up time when the thinset is removed while wet. It is easy to use with clearly marked tips for 1/16, 1/8, 3/16 and 1/4 in grout joints and made of durable plastic material that does not scratch the tile and is easy to clean. This 4-in-1, flat, compact tool for easy storage and portability.
|
Soft grip, solventproof, nylon bristles. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Vulcan margin trowel is perfect for patching and smoothing. The trowel is made of polished steel ferrule, tempered, ground and polished from toe to heel with a durable ergo soft handle that helps reduce fatigue. It offers a high lift handle for maximum hand clearance.
|
Used for evenly spaced wall and floor tile. Easy to remove.
|
Used for evenly spaced wall and floor tile. Easy to remove.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for evenly spaced wall and floor tile. Easy to remove.
|
Intended for disposal after use. For tile grouting.
|
Armaly ProPlus? grouting and concrete sponges are made with our HDQ polyester sponge material. This time tested formula provides superior strength and a cell structure that wipes and rinses excess grout and concrete faster. The sponge is shaped with rounded edges that are designed to minimize digging out or scoring of grout lines, to meet the demands of the professional setter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP traditional flexible tile spacers maintain consistent grout joints and align tiles when installing floor or wall tiles. These spacers are made from flexible plastic, which allows for slight compression as needed during tile installation. Reusable and compatible with various tile types, these spacers are imperative to keep on hand for professional looking results.
|
This Vulcan tile spacer is the perfect tool used to maintain even spacing between tiles, floor and wall, easy to remove.
|
This Vulcan tile spacer is the perfect tool used to maintain even spacing between tiles, floor and wall, easy to remove.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Vulcan tile spacer is the perfect tool used to maintain even spacing between tiles, floor and wall, easy to remove.
|
This Vulcan tile spacer is the perfect tool used to maintain even spacing between tiles, floor and wall, easy to remove.
|
The Vulcan grout spreader speeds up your tile project as you can quickly move large volumes of grout before touching up with a grout float. The flexible rubber blade makes easy application and can move much more grout than a grout float.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP traditional flexible tile spacers maintain consistent grout joints and align tiles when installing floor or wall tiles. These spacers are made from flexible plastic, which allows for slight compression as needed during tile installation. Reusable and compatible with various tile types, these spacers are imperative to keep on hand for professional looking results.
|
The QEP traditional flexible tile spacers maintain consistent grout joints and align tiles when installing floor or wall tiles. These spacers are made from flexible plastic, which allows for slight compression as needed during tile installation. Reusable and compatible with various tile types, these spacers are imperative to keep on hand for professional looking results.
|
QEP All-Purpose Sponge, Polyester, Yellow, 7-1/2 in L, 5-1/2 in W, 1-7/8 in Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Armaly ProPlus Utility Sponge, Polyester, 6-1/4 in Length, 4-3/4 in Width, 2-1/2 in Thickness
|
Made from an advanced sponge formulation that won't pull grout from narrow grout lines while providing a clean line finish. Using durable, high-quality materials that wipe and rinse quickly, this sponge is formulated for use on square edged tiles.
|
The QEP traditional flexible tile spacers maintain consistent grout joints and align tiles when installing floor or wall tiles. These spacers are made from flexible plastic, which allows for slight compression as needed during tile installation. Reusable and compatible with various tile types, these spacers are imperative to keep on hand for professional looking results.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made with a unique cell structure that wipes and rinses excess grout and concrete faster, our heavy-duty grouting and concrete sponge is shaped with rounded edges to minimize digging out or scoring of grout lines. Made in the USA.
|
The QEP traditional flexible tile spacers maintain consistent grout joints and align tiles when installing floor or wall tiles. These spacers are made from flexible plastic, which allows for slight compression as needed during tile installation. Reusable and compatible with various tile types, these spacers are imperative to keep on hand for professional looking results.
|
Used to wipe excess grout from joints. Corners rounded to prevent digging or marring joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These grout remover blade are made of high quality steel with a bright metal finish. The toothed steel blade are used to remove debris. It can be widely used in kitchen, bathroom, balcony, bedroom etc. The package includes 1 tungsten carbide grit edge cutting blade and 1 toothed steel blade. Fits #9602616 grout remover.
|
For accurate tile alignment.
|
For accurate tile alignment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For accurate tile alignment.
|
For accurate tile alignment.
|
For accurate tile alignment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
General-purpose cellulose sponge. Shape conforms to hand. Holds water very well and washes clean. For wiping down walls, floors and wallpaper.
|
For spreading or removing tile grout.
|
Made from seamless white plastic. Blue molded-in tip can be cut to desired opening. Used for holding and dispensing grout or mortar. Easy cleanup.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Vulcan heavy-duty nylon/PVC grout bag is used for holding and dispensing grout or mortar. Has an extra-tough nylon backed with PVC. It's specially designed for continuous use.
|
The QEP multi-surface microfiber cloth can be used to clean, dust and shine most surfaces. It is ideal for removing grout haze after tile installation. This cleaning cloth is durable and washable for multiple uses. Enjoy scratch free cleaning while washing vehicles, countertops and applying sealer.
|
The QEP scrubbing sponge features a two-sided design for both general-purpose cleaning and scrubbing, making it ideal for grouting during tile installation. Featuring a scrub pad on one side, this sponge helps to remove grout haze, epoxy grout and other hard-to-remove material. The sponge side is also great for washing cars and boats.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This grout removal tool is made of high quality plastic and hard metal. The grout remover saw is specifically made to clean out or remove old dirty pitted grout. It can be widely used in kitchen, bathroom, balcony, bedroom etc.
|
Easy applicator bottle for use with sealer to protect new and restore old grout. Includes: 2-wheels, 1/4 in & 1/8 in.
|
The QEP 12-3/4 in latex grout bag for tile grout installation helps keep your grouting job clean and neat. The bag features a durable, heavy-duty latex tip that resists tearing. This bag is ideal for small grouting jobs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thermoplastic resin handles. Designed to spread thin set mortar in hard-to-reach areas.
|
Carbide cutting wheel, long-lasting and scores tile for a clean break.
|
Use for holding and dispensing grout or mortar. Made from seamless black vinyl.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
QEP Replacement Grout Saw Blade, Carbide, Suitable for: 10093 Pro Grout Saw and 10057 Grout Saw
|
Carbide cutting wheel. Pro style scoring wheel easy-to-install factory wheel replacement. Long-lasting precision bevel for cleaner cuts. Titanium-coated carbide cutting wheel.
|
Thermoplastic resin handles. Designed to spread thin set mortar in hard-to-reach areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The T85S Duro-Cel cellulose sponge is ideal for heavy-duty cleaning and masonry work. Its turtleback shape provides for easy grip combined with its durability makes this the most popular sponge in the hardware industry. Made with flax, for added strength and absorbency, the T85 turtleback cellulose sponge is also chemical resistant. It is ideal for use as a disposable masonry float.
|
The QEP handheld grout saw is designed for stripping, cleaning and removing old grout. This tile grout saw includes one steel tooth blade and one carbide grit blade for initial and fine grout removal.
|
Use for holding and dispensing grout or mortar. Made from seamless black vinyl.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Economy-grade, ergonomic handle. Grouting floats for job specific applications.
|
Grout rakes make the work of grout cleaning and removal easy and ARTU's tungsten carbide grit bladed rakes outlast traditional toothed rakes many times over. With the ability to use one or two blades at a time, you can adjust the rake to the size of the joints between your tiles. Rakes come with two blades and replacement blades are available.
|
Use QEP's backerboard scoring knife to make accurate cuts in cement backerboard. This scoring knife features two carbide tips that resist abrasion, maintaining their sharper cutting edge and ensuring accurate cuts and durability. Designed with a comfortable, non-slip grip, this backerboard scoring knife is easy on the hand during repeated use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP 32024 handheld ceramic tile cutter is the ideal tool for manually cutting small ceramic wall tiles up to 6 x 6 in and 1/4 in THK. Quickly score and snap small tiles without using large tile cutters or saws. This tool includes one 1/2 in tungsten carbide scoring wheel for durable and accurate tile scoring. To guarantee a perfect cut run the scoring wheel up against a straight edge.
|
The QEP professional grout saw is designed to easily remove old, dirty or pitted grout. The 10093 includes two heavy-duty carbide blades. Use one blade for thinner grout lines and two blades for wider grout lines. The ergonomic handle helps minimize hand fatigue during repeat use. Designed to maintain exceptional leverage and accuracy, this durable handle provides increased control and comfort.
|
The Vulcan tile nippers are the perfect tool to quickly and easily cut precise shapes in glass tile up to 3/4 in. thick. The tile fits around pipes, cabinets, and walls and can create eye-catching glass mosaics.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gum rubber face bonded to beveled rubber pad with ergonomic thermo plastic resin handles. For grouting hard-to-reach areas.
|
Designed for quick installation, the LASH? tile leveling system reduces costly call backs by ensuring that the finished floor surface is lippage-free. It is the ideal system to use with large-format rectified porcelain, thin porcelain tile, marble and stone where narrow grout joints are required. This fast, simple system is the most cost effective installation method on the market to eliminate lippage.
|
QEP tile wedge spacers support tile and stone on vertical applications to help ensure wall tile is level during installation. The unique shim-like design allows wedges to be pushed in or pulled out to adjust the position of tile up to 1/8 in while also holding the tile in place. Leveling adjustments are fast and easy, from your first row to your last.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP grout float features a non-stick gum rubber to ensure grout is applied smoothly. The two rounded corners help prevent gouging at grout joints and two square corners help you spread grout in corners and tight areas. The large wood handle allows easy maneuvering and a firm grip.
|
Install tile with professional results while saving time with the QEP lash tile leveling clips. Level, align, space and hold tile in place to prevent lippage, ensure a consistent finish, help eliminate warping and correct tile bowing. The curved clips, part A of a two part system, grant even grout lines and align neighboring tile of the same or different thicknesses for a level surface. The wedges, part B, hold the tile at an even height for lippage-free results. The QEP lash clip and wedge system is used by professional and DIY installers alike to save time while providing a level and consistently spaced floor. For quick and easy removal, clips are designed to break off below the surface of the tile.
|
Install tile with professional results while saving time with QEP LASH tile leveling clips. Level, align, space and hold tile in place to prevent lippage, ensure a consistent finish and correct tile bowing. The clips, part A of a two-part system, produce even grout lines and raise neighboring tile of the same thickness for a level finish. The wedges, part B, hold the tile at an even height for lippage-free results. The QEP LASH clip and wedge tile leveling system is used by professional and DIY installers alike to save time while providing a level and consistently spaced tile wall or floor. For quick and easy removal, the single use clips are designed to break off below the surface of the tile with a kick or strike of a floor mallet, while Wedges can be saved and reused.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP tile nipper makes quick and easy work of shaping tile between 1/8 to 1/4 in THK. Designed for cutting irregular shapes in tile, this nipper helps fit tile around oddly-shaped objects, like pipes or sinks. Engineered to stay sharp and provide accurate cutting, the QEP tile nipper delivers long-lasting use.
|
The QEP grout removal tool is perfect for eliminating unwanted grout, thinnest or mortar during tile installation. It features a comfortable grip to help reduce fatigue, even on large jobs. The head features three durable carbide tips and is easy to reverse if the tips get dull. Simply unscrew, flip the head and replace the screw.
|
Tile grout saw for removing tile grout. Angled carbide blade with comfort handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tile pliers/hand cutter are designed with the same purpose as tile cutters. Cuts, scores and snaps wall tile and thin floor tile up to 1/2 in. Drop forge handles. Includes tungsten carbide wheel.
|
Aluminum backing plate is permanently bonded to the non-porous 1/4 in black neoprene pad. Comfortable handle. For brown coat, quartz or marble finishes.
|
Pure gum rubber face is bonded to the dense rubber pad and then cemented to an aluminum backing plate with a smooth handle. Edges are beveled and the two front corners are rounded for ease of spreading. Dense rubber pad is designed specifically for tile grouting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Removes damaged grout from between tiles. Double blade design, carbide grit blade cuts grout quickly, toothed blade clears cutting debris. Offset blade mount keeps knuckles away from work. High-impact plastic handle. Includes two blades, one of each style.
|
The QEP diamond grit tile file features a fine diamond coating on both sides to smooth the edges of all tile after cutting. It is compatible with ceramic, porcelain, glass and stone. The combination flat or round design smooths straight-edges, as well as internal and external curves. This file also smooths other materials, such as laminate flooring and backer board.
|
Gum rubber float bed with thermo plastic resin handles. Grouting floats for job specific applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
QEP Black series diamond rim blades provides accurate cutting with minimal chipping. These blades are specifically engineered for cutting ceramic tile. Designed for wet cutting and long lasting performance.
|
Backerboard scoring knife is used to score cement-based backerboard. Knife scores the backerboard sheets making the backerboard easy to bend and snap. Reversible blade creates additional cutting tip. Includes scoring blade in handle.
|
Thermo plastic resin handles. Grouting floats for job specific applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP glass tile nipper is designed to easily cut irregular shapes in glass tile, between 1/32 to 1/4 in THK, without the use of conventional cutters. Use this nipper to trim glass tile to fit around pipes, cabinets, walls or create eye-catching glass mosaics. Simply hold the nipper like scissors, with the tile between the wheels and squeeze the handles gently. The wheels do not need to turn when you are cutting.
|
The QEP 4 x 9-1/2 in universal float provides maximum flex and leverage for working grout into tile joints, with sanded and non-sanded grouts. This float is designed with a contoured, non-slip plastic handle and aluminum backing plate to offer excellent strength and stability. Preferred by professional flooring installers and DYI aficionados.
|
The QEP stone grout float can be used with all types of grout and tile, making it a versatile tool for your installation projects. This grout float will not mar or scratch tile, while the beveled sides ensure grout is applied smoothly, even over natural stone. The comfortable handle works well in either the left or right hand.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pure gum rubber face is bonded to dense rubber pad and then cemented to aluminum plate with a smooth handle. Edges are beveled and the two front corners are rounded. Dense rubber pad is designed specifically for tile grouting.
|
QEP Cutter, Cutting Capacity: 1/2 in, Cut Material: Tile, Tungsten Carbide Blade, High-Leverage Handle, Steel Handle, Titanium-Coated, Yellow, Dimensions: 14 in L, Includes: Replaceable 1/2 in Titanium Coated Tungsten Carbide Scoring Wheel
|
The QEP compound tile nipper quickly makes irregular cuts on all types of tile up to 1/4 in THK. Tungsten carbide tips provide easy and fast cutting when you need tile to fit around pipes columns or oddly shaped objects. It grants three times the power of conventional carbide tipped nippers while applying less pressure to make cuts. The curved handle and non-slip grip help minimize hand fatigue during repeat use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wide bit for shaping tile. Cut tile up to 1/2 in thick. Carbide cutting edges. Balanced forged steel construction. 5/8 in wide offset jaws open with return spring.
|
Designed for quick installation, the LASH? tile leveling system reduces costly call backs by ensuring that the finished floor surface is lippage-free. It is the ideal system to use with large-format rectified porcelain, thin porcelain tile, marble and stone where narrow grout joints are required. This fast, simple system is the most cost effective installation method on the market to eliminate lippage.
|
QEP Lash Leveling Wedge, Plastic, Yellow, 2 in Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grouting tool for spreading tile grout.
|
For M-D Building Products heavy-duty tile grout saw. Designed with long-lasting diamond cutting blades. Fits Sku #294.1144.
|
The QEP 7 in black widow porcelain diamond blade 6-7008BW ships factory direct right to your door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enjoy accurate cuts with the QEP? glass tile diamond blades for wet and dry cutting. These blades feature a 7 mm continuous rim with a diamond-coated cutting edge for clean cuts in glass tile.
|
Tile nippers for irregular cuts on tile or stone. Twice the power of conventional nippers. TPR ergonomic comfort grips.
|
QEP Cutter, Cutting Capacity: 1/2 in, Cut Material: Tile, Tungsten Carbide Blade, High-Leverage Handle, Steel Handle, Titanium-Coated, Yellow, Dimensions: 20 in L, Includes: Replaceable 1/2 in Titanium Coated Tungsten Carbide Scoring Wheel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This tile cutter machine has a heavy-duty steel base; silver enamel finished base and steel handle with a replaceable hardened tungsten carbide cutting wheel. The cutting capacity is 12 in square by 3.8 in thick.
|
Clean-up of grout haze and hardened grout.
|
The premium quality Gold Series diamond rim blades cut through the toughest ceramic, porcelain and marble. These blades are rigorously tested to provide wobble-free, precise cuts every time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP Black Widow? premium-grade, thin rim diamond blades quickly cut through the toughest ceramic, porcelain, marble and granite. Independent lab test results have proven Black Widow? blades continuously out perform the competition in durability.
|
Machined aluminum cutter head. 7/8 in titanium coated tungsten carbide cutting wheel. Nylon bushing for trouble free operation. Vinyl base trim for improved grip on smooth surfaces.
|
Replacement Blade for sku# 162.3651 Diamond-coated rod saw blade is used for cutting curves in tile, stone and marble.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP Black Widow? premium-grade, thin rim diamond blades quickly cut through the toughest ceramic, porcelain, marble and granite. Independent lab test results have proven Black Widow? blades continuously out perform the competition in durability.
|
Sturdy reusable bucket; essential items needed to install ceramic floor tile; includes trowel, tile nippers, grout float, sponge, gloves, tile spacers and 2.5 gal bucket.
|
For easy application of grout between tiles on detailed installations. Silicone lined, long-lasting reinforced tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clean-up of grout haze and hardened grout.
|
Machined aluminum cutter head. 7/8 in titanium coated tungsten carbide cutting wheel. Nylon bushing for trouble free operation. Vinyl base trim for improved grip on smooth surfaces.
|
Easily make precise cuts with the QEP 700XT 7 in wet tile saw. The powerful, 3/4 hp, 550 W motor cuts tiles up to 1-1/4 in THK. The included 7 in continuous rim diamond blade, table extension, rip guide and angle guide make this wet tile saw perfect for any cutting job.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QEP Xtreme Series slimline tile cutters are engineered by the Pros, for the Pros. The unique ultra slim design is only 5-1/2 in W and weighs less than standard tile cutters on the market. These multi-purpose cutters are for most ceramic and porcelain tile up to 36 in L and has heavy rubber pads for cutting stability, dual chrome-plated rail bars and linear ball-bearing slides for smooth scoring. The 7/8 in titanium-coated tungsten carbide ball-bearing cutting wheel is designed for long-lasting performance, even when scoring hard porcelain tiles.
|
The Roberts 13 in flooring cutter is designed for easy cutting of laminate planks, with an extended handle for extra leverage to provide smooth, clean cuts.
|
Heavy-duty extruded aluminum base will not break, crack or chip. Ball bearing carriage-smooth trouble-free operation. Chromed steel rails.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty aluminum base will not break, crack or chip. Ball bearing trouble-free operation. Machined aluminum cutting head.
|
|
|
