Home > ELECTRICAL > ROUGH ELECTRICAL > CONDUIT
Choose a sub category:
METAL CONDUIT - EMT PVC CONDUIT METAL CONDUIT - RIGID
PLASTIC FLEXIBLE CONDUIT METAL FLEX CONDUIT
Sort By:
1
J-M 67447 Electrical Conduit Allied 101543 EMT Electrical Conduit J-M 67454 Electrical Conduit
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10 ft lengths with one bell end. Allied Tube & Conduit EMT Conduit, Trade Size: 1/2 in, 5/8 in Dia Inside, 45/64 in Dia Outside, Steel, Galvanized, 10 ft L Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10 ft lengths with one bell end.
J-M 67611 Rigid Conduit Carlon 12005-UPC Flexible Raceway Carlon 12007-UPC Flexible Raceway
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed. Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed.
J-M 67462 Rigid Conduit Allied 101550 EMT Electrical Conduit J-M 67603 Rigid Conduit
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
J-M 67470 Rigid Conduit J-M 67595 Rigid Conduit J-M 67488 Rigid Conduit
JM Eagle's SCH 40 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
Allied 101568 EMT Conduit J-M 67587 Rigid Conduit Thomas & Betts 150DRB Liquidtight Flexible/Non-Metallic Conduit Kit
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. Contains everything necessary for complete installation including 6 ft conduit, two straight fittings and one 90 deg fitting. Totally non-metallic system provides assured grounding for safety. Non-conductive, non-corrosive. Easy to install. UL listed components.
J-M 67496 Rigid Conduit CONDUIT NON-MET FLEX 1/2 X 25 Thomas & Betts 150ERB-UPC Liquidtight Flexible/Non-Metallic Conduit Kit
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. For the installation and protection of electrical conductors in circuits of 600 V or less. Manufactured with a spiral of rigid PVC reinforcement imbedded within a flexible PVC wall. Impact- and crush-resistant, liquidtight and highly flexible. UV sunlight-resistant jacket. Rated for temperature range of -30 to 80 deg C, 60 deg C Oil (-22 to +176, 140 deg F Oil). UL listed. Carlon Conduit, Flexible, Trade Size: 3/4 in, PVC, 6 ft L
J-M 67579 Rigid Conduit Southwire 55189401 Liquid Tight Flexible Whip Allied 101576 EMT Conduit
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. Resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356. High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
J-M 67561 Rigid Conduit Allied 103069 Rigid Conduit Allied 103051 Rigid Conduit
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red. Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red.
Alflex FO3750050M Type RWA Reduced Wall Flexible Conduit J-M 67504 Rigid Conduit Southwire 55189301 Liquid Tight Flexible Whip
Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. Resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356.
Allied 101584 EMT Conduit Allied 101592 EMT Conduit J-M 67512 Rigid Conduit
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3. High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
J-M 67553 Rigid Conduit Ultratite 55094321 Liquid Tight Flexible Conduit Allied 103077 Rigid Conduit
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. For the installation and protection of electrical conductors in circuits of 600 V or less. Manufactured with a spiral of rigid PVC reinforcement imbedded within a flexible PVC wall. Impact- and crush-resistant, liquidtight and highly flexible. UV sunlight-resistant jacket. Rated for temperature range of -30 to 80 deg C, 60 deg C Oil (-22 to +176, 140 deg F Oil). UL listed. Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red.
Alflex FO5000025M Type RWA Reduced Wall Flexible Conduit Alflex FO7500025M Type RWA Reduced Wall Flexible Conduit J-M 67546 Rigid Conduit
Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334. Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
Alflex FO7500050M Type RWA Reduced Wall Flexible Conduit Southwire UO5000025M Liquid Tight Flexible Conduit Allied 109085 Rigid Conduit
Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334. Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultrabond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and downtime due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound. Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red.
Carlon 15005-100 Liquid Tight Flexible Conduit Carlon 12007-100 Flexible Raceway Southwire UO5000050M Liquid Tight Flexible Conduit
Carlon Conduit, Flexible, Liquidtight, Trade Size: 1/2 in, PVC, Gray, 100 ft L Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed. Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultrabond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and downtime due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound.
Allied 103093 Rigid Conduit Alflex FO37501001 Type RWA Reduced Wall Flexible Conduit Carlon 15007-100 Liquid Tight Flexible Conduit
Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red. Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334. Liquidtight flexible non-metallic conduit provides great wire protection in harsh, damp environments. Carflex? conduit is non-conductive, non-corrosive and resistant to oil, acid, ozone and alkaline. Carflex? conduit is strong and lightweight and, because it weighs 50% less than metallic systems, it's easy to handle, transport and install. Carflex? is ideal for industrial, air conditioning, heating and outdoor lighting applications.
Allied 103101 Rigid Conduit Carlon 12005-200 Flexible Raceway Alflex FO75001001 Type RWA Reduced Wall Flexible Conduit
Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red. Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed. Alflex? Type RWA is manufactured with a lightweight, high-strength aluminum alloy. Metal strip is helically formed into continuously interlocked flexible metal conduit that can withstand impact and crushing forces.
Carlon 15011-050 Liquid Tight Flexible Conduit Alflex FO5000050M Type RWA Reduced Wall Flexible Conduit Southwire UO500001001 Liquid Tight Flexible Conduit
Liquidtight flexible non-metallic conduit provides great wire protection in harsh, damp environments. Carflex? conduit is non-conductive, non-corrosive and resistant to oil, acid, ozone and alkaline. Carflex? conduit is strong and lightweight and, because it weighs 50% less than metallic systems, it's easy to handle, transport and install. Carflex? is ideal for industrial, air conditioning, heating and outdoor lighting applications. Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334. Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultrabond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and downtime due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound.
Southwire UO7500025M Liquid Tight Flexible Conduit Alflex FO50001001 Type RWA Reduced Wall Flexible Conduit Southwire UO7500050M Liquid Tight Flexible Conduit
Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultrabond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and downtime due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound. Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334. Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultrabond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and downtime due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound.
Carlon 15008-100 Liquid Tight Flexible Conduit Allied 103119 Rigid Conduit Southwire UO75001001 Liquid Tight Flexible Conduit
Liquidtight flexible non-metallic conduit provides great wire protection in harsh, damp environments. Carflex? conduit is non-conductive, non-corrosive and resistant to oil, acid, ozone and alkaline. Carflex? conduit is strong and lightweight and, because it weighs 50% less than metallic systems, it's easy to handle, transport and install. Carflex? is ideal for industrial, air conditioning, heating and outdoor lighting applications. Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red. Southwire Conduit, Flexible, Liquidtight, Trade Size: 3/4 in, Steel, Galvanized, 100 ft L
   
 
1