Home > FASTENERS > NUTS, BOLTS, SCREWS > ANCHORS > ANCHORS - CONCRETE SCREW -HEX
Sort By:
1
Tapcon 24192 Concrete Anchor CobraTap 670W Concrete Screw Tapcon 50403 Concrete Anchor
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
CobraTap 671W Concrete Screw CobraTap 672W Concrete Screw Tapcon 50404 Concrete Anchor
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
Tapcon 24193 Concrete Anchor CNCRT ANCH HEX WSHR 1/4X1-1/4 CNCRT ANCH HEX WSHR 1/4X1-3/4
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Tapcon screw anchors have enabled professionals to get their light to medium-duty concrete anchoring jobs done right the first time, every time. Designed to deliver 30% less torque and 20% more holding power. Designed to deliver superior holding power in all forms of masonry such as concrete, CMU and brick. The advanced WERCS thread form turns any anchoring job into a fast and easy process. Tapcon screw anchors have enabled professionals to get their light to medium-duty concrete anchoring jobs done right the first time, every time. Designed to deliver 30% less torque and 20% more holding power. Designed to deliver superior holding power in all forms of masonry such as concrete, CMU and brick. The advanced WERCS thread form turns any anchoring job into a fast and easy process.
CNCRT ANCH HEX WSHR 1/4X2-3/4 CobraTap 673W Concrete Screw CobraTap 680W Concrete Screw
Tapcon screw anchors have enabled professionals to get their light to medium-duty concrete anchoring jobs done right the first time, every time. Designed to deliver 30% less torque and 20% more holding power. Designed to deliver superior holding power in all forms of masonry such as concrete, CMU and brick. The advanced WERCS thread form turns any anchoring job into a fast and easy process. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
CobraTap 674W Concrete Screw SCREW SLOT HEX BLU 1/4X3-1/4IN SCREW SLOT HEX BLU 1/4X2-1/4IN
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Midwest Fastener Masonry Screw, 1/4 in Dia, 3-1/4 in L, Drill Size: 3/16 in, Head Type: Hex, Slotted, Steel, Blue Ruspert Midwest Fastener Screw, Drive Type: Hex, Package Quantity: 1 PK, Applicable Materials: Concrete
SCREW SLOT HEX BLU 1/4X1-3/4IN SCREW SLOT HEX BLU 1/4X1-1/4IN SCREW SLOT HEX ZN 3/16X3-1/4IN
Midwest Fastener Screw, Drive Type: Hex, Package Quantity: 1 PK, Applicable Materials: Concrete Midwest Fastener Masonry Screw, 1/4 in Dia, 1-1/4 in L, Drill Size: 3/16 in, Head Type: Hex, Slotted, Steel, Blue Ruspert Midwest Fastener Masonry Screw, 3/16 in Dia, 3-1/4 in L, Head Type: Hex, Slotted, Steel, Zinc
SCREW SLOT HEX ZN 3/16X2-3/4IN SCREW SLOT HEX ZN 3/16X2-1/4IN SCREW SLOT HEX ZN 3/16X1-1/4IN
Midwest Fastener Masonry Screw, 3/16 in Dia, 2-3/4 in L, Head Type: Hex, Slotted, Steel, Zinc Midwest Fastener Masonry Screw, 3/16 in Dia, 2-1/4 in L, Drill Size: 5/32 in, Head Type: Hex, Slotted, Steel, Zinc Midwest Fastener Screw, Drive Type: Hex, Package Quantity: 1 PK, Applicable Materials: Concrete
CobraTap 681W Concrete Screw CobraTap 682W Concrete Screw Tapcon 50426 Concrete Anchor
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
CobraTap 670J Concrete Screw CobraTap 683W Concrete Screw CobraTap 671J Concrete Screw
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
SCREW CNCRT BLU 3/16 X 1-1/4IN CONCRETE ANCH HEX WSHR 3/8X5IN CobraTap 680J Concrete Screw
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head. Tapcon+ unmatched performance in concrete, block and brick applications make them an excellent alternative to expansion anchors, plugs, lag shields and have a blue corrosion-resistant coating that enables them to withstand the harshest conditions. That's why when pros look for quality, strength and ease of installation, they choose Tapcon. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
CobraTap 684W Concrete Screw SCREW CNCRT BLUE 1/4 X 1-1/4IN CobraTap 681J Concrete Screw
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
CobraTap 686W Concrete Screw CobraTap 673J Concrete Screw SCREW CNCRT BLU 3/16 X 2-1/4IN
High grade steel, corrosion-resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head.
CONCRETE ANCH HEX WSHR 3/8X6IN CobraTap 674J Concrete Screw CobraTap 682J Concrete Screw
Tapcon+ unmatched performance in concrete, block and brick applications make them an excellent alternative to expansion anchors, plugs, lag shields and have a blue corrosion-resistant coating that enables them to withstand the harshest conditions. That's why when pros look for quality, strength and ease of installation, they choose Tapcon. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
Tapcon 24300 Concrete Screw ANCHOR CNCRT HEX HEAD 1/4X4IN SCREW CNCRT BLU 3/16 X 3-1/4IN
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head.
SCREW CNCRT BLUE 1/4 X 2-1/4IN Tapcon 24305 Concrete Screw SCREW CNCRT BLUE 1/4 X 2-3/4IN
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head.
Tapcon 24292 Concrete Anchor CobraTap 683J Concrete Screw Tapcon 24293 Concrete Anchor
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
SCREW SLOTTED BLU 3/16X1-1/4IN Tapcon 11413 Concrete Anchor Tapcon 24310 Concrete Screw
Midwest Fastener Masonry Screw, 3/16 in Dia, 1-1/4 in L, Drill Size: 5/32 in, Head Type: Hex, Steel, Blue Ruspert Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
SCREW SLOTTED BLU 3/16X1-3/4IN CobraTap 684J Concrete Screw Tapcon 24315 Concrete Screw
Midwest Fastener Masonry Screw, 3/16 in Dia, 1-3/4 in L, Drill Size: 5/32 in, Screw Size: 1/4 in, Head Type: Hex, Slotted, Steel, Blue Ruspert The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
CNCRT ANCH HEX WSHR 1/4X1-3/4 SCREW SLOT HEX BLU 1/4X1-1/4IN SCREW SLOTTED BLU 3/16X2-3/4IN
Tapcon anchors are engineered to be installed fast and trusted for a lifetime. They're the original and still the top when it comes to concrete anchoring. Midwest Fastener Masonry Screw, 1/4 in Dia, 1-1/4 in L, Drill Size: 3/16 in, Screw Size: 5/16 in, Head Type: Hex, Slotted, Steel, Blue Ruspert Midwest Fastener Masonry Screw, 3/16 in Dia, 2-3/4 in L, Drill Size: 5/32 in, Head Type: Hex, Steel, Blue Ruspert
Tapcon 11414 Concrete Anchor Tapcon 24320 Concrete Screw CobraTap 686J Concrete Screw
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
CobraTap 670T Concrete Screw SCREW CONCRETE BLUE 1/4 X 4IN CobraTap 672T Concrete Screw
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Philips flat head, Philips trimfit flat head and hex flange head. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
Tapcon 24330 Concrete Screw Tapcon 24325 Concrete Screw Tapcon 24340 Concrete Screw
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications - electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters, window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
SCREW SLOT HEX BLU 1/4X1-3/4IN CobraTap 671T Concrete Screw CobraTap 680T Concrete Screw
Midwest Fastener Masonry Screw, 1/4 in Dia, 1-3/4 in L, Drill Size: 3/16 in, Head Type: Hex, Steel, Blue Ruspert The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
CNCRT ANCH HEX WSHR 1/4X2-3/4 CNCRT ANCH HEX WSHR 1/4X3-1/4 CobraTap 681T Concrete Screw
Tapcon anchors are engineered to be installed fast and trusted for a lifetime. They're the original and still the top when it comes to concrete anchoring. Tapcon anchors are engineered to be installed fast and trusted for a lifetime. They're the original and still the top when it comes to concrete anchoring. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
CobraTap 673T Concrete Screw ANCHOR CNCRT HWH 1/4 X 3-1/4IN ANCHOR SCREW TAPCON 1/2X4IN
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Ideal for projects that require heavy-duty holding power, Tapcon+ concrete screw anchors are the stronger, faster and easier masonry anchoring solution. This heavy-duty screw anchor features a high-strength body that's built to resist both high wind and seismic tension and is ICC-ES approved for use in both cracked and un-cracked concrete. Superior to wedge and sleeve anchors, Tapcon+ installs in less than half the time while delivering 20% more holding power and the flexibility to install closer to the edge of the concrete and closer to one another.
CNCRT ANCHOR HEX WSHR 1/2X3IN SCREW SLOT HEX BLU 1/4X2-1/4IN ANCHOR SCREW HEX WSHR 3/8X3IN
Tapcon+ is the leading solution for heavy-duty concrete applications. These all-in-one substrate screw anchors install 2 to 3X faster and have up to 20% more holding power than wedge or sleeve anchors. Their Climaseal? blue coating provides long-lasting performance and corrosion resistance and allows you to drive close to the edge with confidence. Midwest Fastener Masonry Screw, 1/4 in Dia, 2-1/4 in L, Drill Size: 3/16 in, Head Type: Hex, Steel, Blue Ruspert The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
CNCRT ANCHOR HEX WSHR 1/2X6IN CobraTap 683T Concrete Screw SCREW SLOT HEX BLU 1/4X2-3/4IN
Tapcon unmatched performance in concrete, block and brick applications make them an excellent alternative to expansion anchors, plugs, lag shields and have a blue corrosion-resistant coating that enables them to withstand the harshest conditions. That's why when pros look for quality, strength and ease of installation, they choose Tapcon. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Midwest Fastener Masonry Screw, 1/4 in Dia, 2-3/4 in L, Drill Size: 3/16 in, Head Type: Hex, Steel, Blue Ruspert
CobraTap 674T Concrete Screw CNCRT ANCHOR HEX WSHR 1/2X5IN CobraTap 682T Concrete Screw
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. These all-in-one substrate screw anchors install 2 to 3X faster and have up to 20% more holding power than wedge or sleeve anchors. Their Climaseal? blue coating provides long lasting performance and corrosion resistance and allows you to drive close to the edge with confidence. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
CobraTap 684T Concrete Screw ANCHOR CNCRT HWH 1/4 X 1-1/4IN ANCHOR SCREW HEX WSHR 3/8X4IN
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
ANCHOR CNCRT HWH 1/4 X 2-3/4IN SCREW SLOT HEX BLU 1/4X3-1/4IN CobraTap 676T Concrete Screw
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Midwest Fastener Masonry Screw, 3-1/4 in L, Drill Size: 3/16 in, Screw Size: 1/4 in, Head Type: Hex, Steel, Blue Ruspert The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
ANCHOR CNCRT HWH 1/4 X 1-3/4IN CobraTap 686T Concrete Screw ANCHOR SCREW HEX WSHR 1/2X6IN
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
ANCHOR SCREW HEX WSHR 1/2X3IN ANCHOR SCREW HEX WSHR 5/8X4IN ANCHOR SCREW HEX WSHR 1/2X4IN
The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
ANCHOR SCREW HEX WSHR 5/8X6IN ANCHOR SCREW HEX WSHR 5/8X8IN
The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. The Screw-Bolt?+ anchor is a one-piece, heavy-duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt?+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
   
 
1