|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProBite disconnect tool is used for quick and easy fitting removal in all plumbing applications. The ProBite disconnect tool is available in all standard fitting sizes to ensure a quick and proper fitting removal every time.
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
The ProBite disconnect tool is used for quick and easy fitting removal in all plumbing applications. The ProBite? disconnect tool is available in all standard fitting sizes to ensure a quick and proper fitting removal every time.
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.
|
Need to make a change to an installed SharkBite? PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite? PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Need to make a change to an installed SharkBite? PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite? PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in.
|
Need to make a change to an installed SharkBite? PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite? PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in.
|
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
B & K ProLine Adapter, Nominal Size: 1/2 in, Push-Fit x Male Connection, 200 psi, Brass
|
Plastic male stem fitting for point of use low-pressure applications. It is designed and manufactured for many years of trouble-free service. Produced of off-white polypropylene, a high-performance thermoplastic material, the design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
This quick-connect elbow fitting works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making it ideal for vibrating and dynamic applications.
|
ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp/clamp/PEX rings, increasing productivity. Securely and permanently connect two pieces of different-sized PEX pipe together. Can be rotated after connected and is ideal for working in tight spaces. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic female stem fitting is ASSE 1061 certified for domestic plumbing service. It is designed and manufactured for many years of trouble-free service. Produced of off-white Polysulfone, a high-performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Connects to copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B & K ProLine Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 1/4 in x 1/8 in MIP quick-connect elbow works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
ProBite's lead-free reducing coupling connects copper, CPVC and PEX tubing in any combination, for long-lasting full flow connections. Easy to install, easy to remove, reusable, long-lasting and backed by a 75 years warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
The SharkBite? push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available in either straight connections or as an elbow 90 deg connection. They are also easily rotatable after installation for easy installation even in tight spaces.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPT fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
|
The SharkBite? straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B & K ProLine Pipe Tee, Nominal Size: 1/2 in, Push-Fit Connection, 200 psi, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
The SharkBite? stop valve connectors allow you to easily connect 1/4 in (3/8 in OD) copper tube sized pipe (CTS) to either a 1/4 or 3/8 in compression connection, which are primarily used for refrigerators or ice makers. The push-to-connect connection is the fastest and easiest way to connect to copper, PEX, CPVC or PE-RT pipe and requires no soldering, clamps, unions or glue.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
|
The SharkBite? push-to-connect faucet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 1/2 in threaded connection on the other end. They are also easily rotatable after installation for easy installation even in tight spaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
|
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
|
SharkBite? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/8 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
|
SharkBite? female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
|
The SharkBite? push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available in either straight connections or as an elbow 90 deg connection. They are also easily rotatable after installation for easy installation even in tight spaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 3/8 in x 1/2 in plastic quick-connect elbow incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
|
Dishwasher elbows are a 90 deg fitting that connects the hot water line to the dishwasher. SharkBite? dishwasher elbows enable quick and easy connection and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal watertight seal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B & K ProLine Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max female adapters have an innovative push-to-connect design that enables quick and easy transitions between CTS pipe to an MNPT threaded connections. Ideal for working in tight spaces and easier to use, Max female adapters make installs more efficient.
|
Plug the end of PEX, copper, CPVC and PE-RT pipe. Innovative push-to-connect design makes for quick and easy installation and removal. Ideal for working in tight spaces. Faster install time and ease-of use reduces installation errors.
|
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When transitioning pipe size, there is no easier way than with SharkBite? push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
SharkBite Disconnect Clip, 1/2 to 1 in, PVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.
|
Allows for the universal brass push connection to be disconnected from the pipe quickly and easily. Easy one-handed operation in tight spaces.
|
SharkBite Max push-to-connect male adapters are a fast way to transition between CTS pipe and an FNPT threaded connection. Ideal for working in tight spaces, Max male adapters enable more efficient install times and ease-of use reduces installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite? EvoPEX fittings are intended to be installed with SharkBite? PEX pipe as a holistic system.
|
Allows for the universal brass push connection to be disconnected from the pipe quickly and easily. Easy one-handed operation in tight spaces.
|
This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 3/8 in NPT fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.
|
Allows for the universal brass push connection to be disconnected from the pipe quickly and easily. Easy one-handed operation in tight spaces.
|
This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPSM fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
Innovative push-to-connect design makes for quick and easy transition between PEX, copper, CPVC, PE-RT or SDR-9 HDPE pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plug the end of PEX, copper, CPVC and PE-RT pipe. Innovative push-to-connect design makes for quick and easy installation and removal. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
SharkBite Max male adapter elbows are designed to connect CTS pipe to a FNPT threaded connection. Compatible with PEX, copper, CPVC, PE-RT or HDPE SDR-9 in any combination, the Max adapter elbows are ideal for pipe transitions.
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/4 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
|
Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.
|
When transitioning pipe size, there is no easier way than with SharkBite? push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 3/4 in NPSM fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
The SharkBite? PVC x MNPT adapter allows you to make a joint to Schedule 40, 80 or 120 PVC pipe using a push-fit connection and gives you a male NPT adapter on the opposite end.
|
Hy-Ear elbows are used to transition from copper, PEX, CPVC or PE-RT to threaded pipe. They are similar to female elbows, but have mounting ears with holes for securing to a surface (typically an overhead surface such as a ceiling) and they provide additional stability. SharkBite? Hy-Ear elbows do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal watertight seal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2 in CTS x 1/4 OD.
|
The SharkBite Max 90 deg elbow offers an innovative push-to-connect design for quick and easy installation when connecting two pieces of potable water pipe. Ideal for working in tight spaces, the 90 deg brass push-to-connect elbow can be installed in wet lines with no special tools, crimping, soldering or glue required. Faster install time and ease-of use reduces installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
Innovative push-to-connect design makes for quick and easy installation when connecting two pieces of pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
SharkBite Max drop-ear elbow is designed to make a 90-degree connection between PEX, copper, CPVC, PE-RT or HDPE SDR-9 and a MNPT threaded connection. Typically used for installing shower arms and tub spouts. Approved for underground and behind-the-wall applications with no access panels.
|
This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 7/8 in BC fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? tees are push-to-connect and are capable of connecting copper, PEX, CPVC or PE-RT tubing in any combination. They are rotatable after assembly which makes for easy installation even in cramped working conditions.
|
This 1/2 in FIP plastic quick-connect drop ear elbow incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
SharkBite? PVC transition couplings connect PVC pipe (SCH 40, 80 and 120) to Copper, PEX, CPVC and PE-RT tubing with no solder, clamps, unions or glue required. The white colored collar is intended for use on PVC pipe while the tan colored collar is intended for Copper, PEX, CPVC or PE-RT. This fitting is not intended to be connected to PVC pipe on both sides of the fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts Tube Union Coupling, Nominal Size: 3/4 in, 250 psi, Operating Temperature: 75 deg F, Plastic
|
SharkBite Max polybutylene adapters are the fastest way to transition between polybutylene pipe and PEX, copper, CPVC, PE-RT or SDR-9 HDPE pipe in any combination. Each polybutylene transition coupling has color-coordinated collars on each end to identify which side goes with which pipe - the gray collar end is compatible with polybutylene pipe and the tan collar end is compatible with PEX, copper, CPVC, PE-RT and HDPE SDR-9 pipe. No special tools, crimping, soldering or glue required.
|
SharkBite Max? allows users to connect pipe with ease- no tools needed. This new design features a stainless steel retainer for extra strength, higher-pressure ratings (250 psi) and a lower insertion e ort than previous versions of SharkBite brass push-to-connect fittings. SharkBite Max fittings do not require a PEX sit enter and are compatible with PEX, copper, CPVC, PE-RT and HDPE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max drop-ear elbow is designed to make a 90-degree connection between PEX, copper, CPVC, PE-RT or HDPE SDR-9 and a MNPT threaded connection. Typically used for installing shower arms and tub spouts. Approved for underground and behind-the-wall applications with no access panels.
|
Innovative push-to-connect design makes for quick and easy transition between PEX, copper, CPVC, PE-RT or SDR-9 HDPE pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
Each brass push 90 deg elbow with drain/vent allows for water to be drained from the line if needed. Common applications include draining irrigation systems or hose bibbs when winterizing. Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Innovative push-to-connect design makes for quick and easy installation when connecting two pieces of different sized pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
Innovative push-to-connect design allows for quick and easy installation of 90 deg elbow fitting that connects the hot water line to the dishwasher. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
The SharkBite? PVC x MNPT adapter allows you to make a joint to Schedule 40, 80 or 120 PVC pipe using a push-fit connection and gives you a male NPT adapter on the opposite end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Innovative push-to-connect design makes for quick and easy transition between PEX, copper, CPVC, PE-RT or HDPE pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
Innovative push-to-connect design makes for quick and easy installation when connecting two pieces of pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
Make a quick 90 deg transition from polybutylene to a different pipe type. Color-coordinated collars on the Brass Push Polybutylene 90deg Transition Elbow help to identify which side goes with which pipe - the gray collar end is compatible with polybutylene pipe and the tan collar end is compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe. Innovative push-to-connect technology for quick and easy installation, even in tight spaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? reducing tees come in a variety of different sizes and allow for pipe size reduction in multiple ways. These fittings are easily rotated after installation to make connecting even easier in tight spaces. There is no need for soldering, clamps, unions or glue.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.
|
SharkBite? PVC transition couplings connect PVC pipe (SCH 40, 80 and 120) to Copper, PEX, CPVC and PE-RT tubing with no solder, clamps, unions or glue required. The white colored collar is intended for use on PVC pipe while the tan colored collar is intended for Copper, PEX, CPVC or PE-RT. This fitting is not intended to be connected to PVC pipe on both sides of the fitting.
|
This 1 in CTS quick-connect elbow incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max tees are used to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe of the same size. Max brass tees offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass tees are ideal for working in tight spaces and can be leveraged wherever repairs are needed.
|
SharkBite Max drop-ear elbow is designed to make a 90-degree connection between PEX, copper, CPVC, PE-RT or HDPE SDR-9 and a MNPT threaded connection. Typically used for installing shower arms and tub spouts. Approved for underground and behind-the-wall applications with no access panels.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
Slip fittings simplify repair by doing the job that two couplings and extra pipe used to do. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe. The fitting can be released with a disconnect tool and slid back onto the other end of the pipe for successful leak repair. Suitable for copper or CPVC only.
|
B & K ProLine Pipe Tee, Nominal Size: 3/4 in, Push-Fit Connection, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.
|
Transition from polybutylene pipe to PEX, copper, CPVC, PE-RT or HDPE pipe. Fitting has color-coordinated collars on each end to identify which side goes with which pipe - the gray collar end is compatible with polybutylene pipe and the tan collar end is compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
|
Each brass push 90 deg elbow with drain/vent allows for water to be drained from the line if needed. Common applications include draining irrigation systems or hose bibbs when winterizing. Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
SharkBite? female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.
|
SharkBite? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ProBite provides lead-free long-lasting slip couplings that are easy to install, remove and reuse. Connect to copper, PEX and CPVC in any combination. The ideal solutions for pipe fitting repairs. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe.
|
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
|
SharkBite? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max? allows users to connect pipe with ease- no tools needed. This new design features a stainless steel retainer for extra strength, higher-pressure ratings (250 psi) and a lower insertion e ort than previous versions of SharkBite brass push-to-connect fittings. SharkBite Max fittings do not require a PEX sit enter and are compatible with PEX, copper, CPVC, PE-RT and HDPE.
|
SharkBite Max female adapters have an innovative push-to-connect design that enables quick and easy transitions between CTS pipe to an MNPT threaded connections. Ideal for working in tight spaces and easier to use, Max female adapters make installs more efficient.
|
SharkBite Max push-to-connect male adapters are a fast way to transition between CTS pipe and an FNPT threaded connection. Ideal for working in tight spaces, Max male adapters enable more efficient install times and ease of use reduces installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max push-to-connect male adapters are a fast way to transition between CTS pipe and an FNPT threaded connection. Ideal for working in tight spaces, Max male adapters enable more efficient install times and ease of use reduces installation errors.
|
Lead-free reducing tee connects to copper, CPVC and PEX tubing with easy push connect technology. Backed by a 75 years warranty. Our lead-free reducing tees are ideal for manufacturing, municipal, residential and commercial applications.
|
SharkBite? end caps are push to connect and are the easiest way to cap off your copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a disconnect clip. All SharkBite? fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.
|
SharkBite Max stub-out elbows are designed for easy installation during the rough-in phase, allowing for easy and quick-connection to fixtures after the drywall is completed and painted.
|
SharkBite Max? allows users to connect pipe with ease- no tools needed. This new design features a stainless steel retainer for extra strength, higher-pressure ratings (250 psi) and a lower insertion e ort than previous versions of SharkBite brass push-to-connect fittings. SharkBite Max fittings do not require a PEX sit enter and are compatible with PEX, copper, CPVC, PE-RT and HDPE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Make a quick 90 deg transition from polybutylene to a different pipe type. Color-coordinated collars on the Brass Push Polybutylene 90deg Transition Elbow help to identify which side goes with which pipe - the gray collar end is compatible with polybutylene pipe and the tan collar end is compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe. Innovative push-to-connect technology for quick and easy installation, even in tight spaces.
|
SharkBite Max reducing tees are designed to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe of different sizes. Approved for underground and behind-the-wall applications with no access panels, Max reducing tees allow for fast and easy installation when joining two different size pipe.
|
SharkBite Max reducing tees are designed to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe of different sizes. Approved for underground and behind-the-wall applications with no access panels, Max reducing tees allow for fast and easy installation when joining two different size pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plug the end of PEX, copper, CPVC and PE-RT pipe. Innovative push-to-connect design makes for quick and easy installation and removal. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
The SharkBite? straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
|
When transitioning pipe size, there is no easier way than with SharkBite? push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B & K ProLine Pipe Coupling, Nominal Size: 3/4 in, Brass, Suitable for: Copper, CPVC and PEX Tubing
|
The SharkBite? PVC transition slip tee allows you to add a line into your existing plumbing system while converting from copper pipe to PVC pipe. The slip feature allows you to cut into an existing copper or CPVC pipe and run out PVC Schedule 40, 80 or 120 from the tee. The white collar center connection fits Schedule 40, 80, 120 PVC and also can be used on IPS CPVC Schedule 40 and 80 pipes. The tan collar ends fit CTS copper, PEX, CPVC or PE-RT pipe. Simply insert the slip coupling onto the pipe and using the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of pipe completing the connection.
|
The SharkBite? PVC transition slip tee allows you to add a line into your existing plumbing system while converting from copper pipe to PVC pipe. The slip feature allows you to cut into an existing copper or CPVC pipe and run out PVC Schedule 40, 80 or 120 from the tee. The white collar center connection fits Schedule 40, 80, 120 PVC and also can be used on IPS CPVC Schedule 40 and 80 pipes. The tan collar ends fit CTS copper, PEX, CPVC or PE-RT pipe. Simply insert the slip coupling onto the pipe and using the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of pipe completing the connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.
|
SharkBite Max slip couplings are ideal for making quick repairs on pipe, the slip end is only compatible with copper or CPVC. Using a single fitting, you can remove up to two inches of damaged pipe to make a repair, with the need for additional pipe or fittings. Max slip couplings are ideal for working in tight spaces and can be leveraged wherever repairs are needed.
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max reducing couplings are designed to connect two different sizes of pipe. Compatible with PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe. The faster install time and versatile use reduces installation errors.
|
Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.
|
Watts Tube Union Coupling, Nominal Size: 1 in, Plastic
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
|
Watts? quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts? quick-connect design allows for quick and easy connections without the use of installation tools.
|
SharkBite? elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max slip couplings are ideal for making quick repairs on pipe, the slip end is only compatible with copper or CPVC. Using a single fitting, you can remove up to two inches of damaged pipe to make a repair, with the need for additional pipe or fittings. Max slip couplings are ideal for working in tight spaces and can be leveraged wherever repairs are needed.
|
The SharkBite Max 90 deg elbow offers an innovative push-to-connect design for quick and easy installation when connecting two pieces of potable water pipe. Ideal for working in tight spaces, the 90 deg brass push-to-connect elbow can be installed in wet lines with no special tools, crimping, soldering or glue required. Faster install time and ease of use reduces installation errors.
|
This 1 CTS x 1 in NPT plastic male elbow fitting for point of use low-pressure applications. It is designed and manufactured for many years of trouble-free service. Produced of off-white polypropylene, a high-performance thermoplastic material, the design allows for quick and easy connections without the use of installation tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be removed and repaired. Insert the slip coupling onto the PVC pipe and use the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of the pipe, completing the connection.
|
This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 3/4 in GHT fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).
|
Innovative push-to-connect design makes for quick and easy installation. Slip feature allows for two inches of rigid copper or CPVC pipe to be cut out of an existing line and connected back together with the Disconnect Clip to slide the fitting back to the other end of pipe. Easily screw in the expansion tank into the middle FNPT threaded branch after installing the tee into the line. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PVC x MNPT adapter allows you to make a joint to Schedule 40, 80 or 120 PVC pipe using a push-fit connection and gives you a male NPT adapter on the opposite end.
|
The SharkBite? PVC transition slip tee allows you to add a line into your existing plumbing system while converting from copper pipe to PVC pipe. The slip feature allows you to cut into an existing copper or CPVC pipe and run out PVC Schedule 40, 80 or 120 from the tee. The white collar center connection fits Schedule 40, 80, 120 PVC and also can be used on IPS CPVC Schedule 40 and 80 pipes. The tan collar ends fit CTS copper, PEX, CPVC or PE-RT pipe. Simply insert the slip coupling onto the pipe and using the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of pipe completing the connection.
|
SharkBite? PVC transition couplings connect PVC pipe (SCH 40, 80 and 120) to Copper, PEX, CPVC and PE-RT tubing with no solder, clamps, unions or glue required. The white colored collar is intended for use on PVC pipe while the tan colored collar is intended for Copper, PEX, CPVC or PE-RT. This fitting is not intended to be connected to PVC pipe on both sides of the fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PVC transition slip tee allows you to add a line into your existing plumbing system while converting from copper pipe to PVC pipe. The slip feature allows you to cut into an existing copper or CPVC pipe and run out PVC Schedule 40, 80 or 120 from the tee. The white collar center connection fits Schedule 40, 80, 120 PVC and also can be used on IPS CPVC Schedule 40 and 80 pipes. The tan collar ends fit CTS copper, PEX, CPVC or PE-RT pipe. Simply insert the slip coupling onto the pipe and using the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of pipe completing the connection.
|
Connection shall be made using Watts? series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.
|
SharkBite Max tees are used to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe of the same size. Max brass tees offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass tees are ideal for working in tight spaces and can be leveraged wherever repairs are needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite? tees are push-to-connect and are capable of connecting copper, PEX, CPVC or PE-RT tubing in any combination. They are rotatable after assembly which makes for easy installation even in cramped working conditions.
|
SharkBite? reducing tees come in a variety of different sizes and allow for pipe size reduction in multiple ways. These fittings are easily rotated after installation to make connecting even easier in tight spaces. There is no need for soldering, clamps, unions or glue.
|
The SharkBite? PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be removed and repaired. Insert the slip coupling onto the PVC pipe and use the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of the pipe, completing the connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max tees are used to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe of the same size. They are ideal for working in tight spaces and can be leveraged wherever repairs are needed.
|
SharkBite Max reducing tees are designed to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe of different sizes. Approved for underground and behind-the-wall applications with no access panels, Max reducing tees allow for fast and easy installation when joining two different size pipe.
|
SharkBite Push Pipe Adapter, 1/2 in Nominal, MNPT Connection, 200 psi Pressure, 200 deg F Operating, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max slip couplings are ideal for making quick repairs on pipe, the slip end is only compatible with copper or CPVC. Using a single fitting, you can remove up to two inches of damaged pipe to make a repair, with the need for additional pipe or fittings. Max slip couplings are ideal for working in tight spaces and can be leveraged wherever repairs are needed.
|
SharkBite Max tees are used to connect PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe of the same size. Max brass tees offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass tees are ideal for working in tight spaces and can be leveraged wherever repairs are needed.
|
SharkBite Max push-to-connect male adapters are a fast way to transition between CTS pipe and an FNPT threaded connection. Ideal for working in tight spaces, Max male adapters enable more efficient install times and ease-of use reduces installation errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plug the end of PEX, copper, CPVC and PE-RT pipe. Innovative push-to-connect design makes for quick and easy installation and removal. Ideal for working in tight spaces. Faster install time and ease-of use reduces installation errors.
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
SharkBite? EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite? EvoPEX fittings are intended to be installed with SharkBite? PEX pipe as a holistic system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to make 90 deg connection between two pieces of pipe. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipes.
|
The SharkBite? PVC transition slip tee allows you to add a line into your existing plumbing system while converting from copper pipe to PVC pipe. The slip feature allows you to cut into an existing copper or CPVC pipe and run out PVC Schedule 40, 80 or 120 from the tee. The white collar center connection fits Schedule 40, 80, 120 PVC and also can be used on IPS CPVC Schedule 40 and 80 pipes. The tan collar ends fit CTS copper, PEX, CPVC or PE-RT pipe. Simply insert the slip coupling onto the pipe and using the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of pipe completing the connection.
|
SharkBite Max brass push-to-connect couplings make for quick and easy installations. Use the straight coupling to quickly connect two pieces of PEX, copper, CPVC, PE-RT or HDPE SDR-9 pipe in any combination. Approved for behind-the-wall and underground (when wrapped) applications, Max brass couplings offer the versatility to be permanently installed or provide a temporary fix while you work. SharkBite Max push-to-connect brass pipe connectors are ideal for working in tight spaces and can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plug the end of PEX, copper, CPVC and PE-RT pipe. Innovative push-to-connect design makes for quick and easy installation and removal. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
|
SharkBite Max ball valves innovative push-to-connect design makes for quick and easy installation when needing to install a new or replacement ball valve. Compatible with PEX, copper, CPVC and PE-RT pipe in any combination without a need for soldering, clamps, glue or unions. The valve can be installed where water shut off is needed and rotated after install for easier installation in tight spaces.
|
The SharkBite? PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be removed and repaired. Insert the slip coupling onto the PVC pipe and use the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of the pipe, completing the connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Max? allows users to connect pipe with ease- no tools needed. This new design features a stainless steel retainer for extra strength, higher-pressure ratings (250 psi) and a lower insertion e ort than previous versions of SharkBite brass push-to-connect fittings. SharkBite Max fittings do not require a PEX sit enter and are compatible with PEX, copper, CPVC, PE-RT and HDPE.
|
Eliminates the need for additional fittings. Produced of polysulfone, a high performance thermal plastic material, this manifold is designed for years of trouble-free service. The design allows for quick and easy installation without the use of additional tools.
|
SharkBite Max? allows users to connect pipe with ease- no tools needed. This new design features a stainless steel retainer for extra strength, higher-pressure ratings (250 psi) and a lower insertion e ort than previous versions of SharkBite brass push-to-connect fittings. SharkBite Max fittings do not require a PEX sit enter and are compatible with PEX, copper, CPVC, PE-RT and HDPE.
|
|
|
