|
|
|
|
|
|
|
|
|
|
|
ProSource Pipe Elbow, Nominal Size: 1/2 in, Threaded Connection, Angle: 90 deg
|
The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
|
For steam and water working pressure up to 150 lb. Squared head, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
For steam and water working pressure up to 150 lb. Squared head, right hand threads.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
Use for closing and terminating the end of a pipe or fitting. Corrosion-resistant galvanized finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Pipe Coupling, Nominal Size: 1/2 in, Threaded Connection, Wall Thickness: 0.1 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.34 in L
|
ProSource Pipe Coupling, Nominal Size: 1/8 in, Threaded Connection, Wall Thickness: 0.19 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 0.96 in L
|
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions of ANSI/ASME B.16.3.
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Hex Pipe Cap, Nominal Size: 1/8 in, Threaded Connection, Wall Thickness: 0.09 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Steel, 0.53 in L
|
The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
ProSource Pipe Coupling, Nominal Size: 1/4 in, FNPT Connection, Wall Thickness: 0.09 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.06 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
ProSource Pipe Elbow, Nominal Size: 3/4 in, Threaded Connection, Angle: 90 deg
|
The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
|
For steam and water working pressure up to 150 lb. Squared head, right hand threads.
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
ProSource Pipe Elbow, Nominal Size: 1/4 in, Threaded Connection, Angle: 90 deg
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Pipe Elbow, Nominal Size: 3/8 in, Threaded Connection, Angle: 90 deg
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
ProSource Pipe Coupling, Nominal Size: 3/8 in, NPT Connection, Wall Thickness: 0.1 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.16 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
ProSource Reducing Pipe Elbow, Nominal Size: 1/2 x 3/8 in, FIPT Connection, Angle: 90 deg, 300 psi, Operating Temperature: -20 to 150 deg F, Iron
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
For steam and water working pressure up to 150 lb. Squared head, right hand threads.
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Pipe Coupling, Nominal Size: 3/4 in, Threaded Connection, Wall Thickness: 0.12 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.52 in L
|
ProSource Pipe Elbow, Nominal Size: 1 in, Threaded Connection, Angle: 90 deg
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
For steam and water working pressure up to 150 lb. Squared head, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
ProSource Reducing Pipe Elbow, Nominal Size: 3/8 x 1/4 in, Threaded Connection, Angle: 90 deg
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
ProSource Pipe Coupling, Nominal Size: 1 in, Threaded Connection, Wall Thickness: 0.13 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.67 in L
|
ProSource Reducing Pipe Elbow, Nominal Size: 3/4 x 1/2 in, Threaded Connection, Angle: 90 deg
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Pipe Elbow, Nominal Size: 3/8 in, Threaded Connection, Angle: 45 deg, 150 psi
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
For steam and water working pressure up to 150 lb. Squared head, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
ProSource Pipe Elbow, Nominal Size: 1/8 in, Threaded Connection, Angle: 90 deg
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
Reducing elbow, 90 deg angle, 1 in, 3/4 in, with female NPT threads for connecting to a male pipe or fitting.
|
The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
B & K Pipe Extension Piece, Nominal Size: 1/2 in, FIP x MIP Connection, 150 lb, Iron
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Reducing Pipe Elbow, Nominal Size: 3/4 x 3/8 in, Threaded Connection, Angle: 90 deg
|
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
ProSource Pipe Coupling, Nominal Size: 1-1/2 in, Threaded Connection, Wall Thickness: 0.15 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 2.15 in L
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
For steam and water working pressure up to 150 lb. Squared head, right hand threads.
|
ProSource Pipe Coupling, Nominal Size: 1-1/4 in, Threaded Connection, Wall Thickness: 0.14 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 1.93 in L
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
ProSource Pipe Elbow, Nominal Size: 1-1/2 in, Threaded Connection, Angle: 90 deg
|
ProSource Pipe Elbow, Nominal Size: 1-1/4 in, Threaded Connection, Angle: 90 deg
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Reducing Hex Pipe Bushing, Nominal Size: 1-1/2 x 1 in, Female x Male Connection, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Hex Size: 2 in, Steel, 1.14 in L
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.
|
The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
ProSource Reducing Pipe Elbow, Nominal Size: 1 x 1/2 in, Threaded Connection, Angle: 90 deg
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
For steam and water working pressure up to 150 lb. Squared head, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
Street pipe elbow, 45 deg angle, 1 in with NPT female to male threaded connects.
|
ProSource Pipe Coupling, Nominal Size: 2 in, Threaded Connection, Wall Thickness: 0.17 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Malleable Steel, 2.53 in L
|
ProSource Pipe Elbow, Nominal Size: 2 in, Threaded Connection, Angle: 90 deg
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
The galvanized floor flanges are made from malleable iron for tensile strength. Its galvanized finish resists rust in water, air, and steam applications.
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
The galvanized cross is for use with residential drinking water applications. Its flat branded with right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized union is for steam and water working pressure up to 150 lb. It has a brass to iron ball joint seat and the male end of seat is made with radius to insure ideal contact if piles are out of line. This is recommended for all ordinary plumbing and steam fitting jobs. It's scientifically designed to reduce weight without sacrificing strength.
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
ProSource Hex Pipe Bushing, Nominal Size: 2 x 1 in, Female x Male Connection, Wall Thickness: 0.22 in, 300 psi, Operating Temperature: -4 to 572 deg F, Schedule Rating: SCH 40, Hex Size: 1.95 in, Steel, 1.29 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Reducing Pipe Elbow, Nominal Size: 1-1/4 x 3/4 in, Threaded Connection, Angle: 90 deg
|
This galvanized 90 degree reducing elbow is used to change direction in piping. It for use with water or steam and meets ANSI standards.
|
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized cross is for use with residential drinking water applications. Its flat branded with right hand threads.
|
ProSource Anvil Floor Flange, Nominal Size: 3/4 in, Threaded Connection, Operating Temperature: -4 to 572 deg F, Steel
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized union is for steam and water working pressure up to 150 lb. It has a brass to iron ball joint seat and the male end of seat is made with radius to insure ideal contact if piles are out of line. This is recommended for all ordinary plumbing and steam fitting jobs. It's scientifically designed to reduce weight without sacrificing strength.
|
The galvanized union is for steam and water working pressure up to 150 lb. It has a brass to iron ball joint seat and the male end of seat is made with radius to insure ideal contact if piles are out of line. This is recommended for all ordinary plumbing and steam fitting jobs. It's scientifically designed to reduce weight without sacrificing strength.
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized cross is for use with residential drinking water applications. Its flat branded with right hand threads.
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
The galvanized reducing coupling is used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Its designed for a tight joint at the pipe. Female threads at both ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized union is for steam and water working pressure up to 150 lb. It has a brass to iron ball joint seat and the male end of seat is made with radius to insure ideal contact if piles are out of line. This is recommended for all ordinary plumbing and steam fitting jobs. It's scientifically designed to reduce weight without sacrificing strength.
|
The galvanized union is for steam and water working pressure up to 150 lb. It has a brass to iron ball joint seat and the male end of seat is made with radius to insure ideal contact if piles are out of line. This is recommended for all ordinary plumbing and steam fitting jobs. It's scientifically designed to reduce weight without sacrificing strength.
|
This galvanized 90 degree reducing elbow is used to change direction in piping. It for use with water or steam and meets ANSI standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized 45 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
This galvanized 90 degree reducing elbow is used to change direction in piping. It for use with water or steam and meets ANSI standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
This galvanized 90 degree reducing elbow is used to change direction in piping. It for use with water or steam and meets ANSI standards.
|
The galvanized union is for steam and water working pressure up to 150 lb. It has a brass to iron ball joint seat and the male end of seat is made with radius to insure ideal contact if piles are out of line. This is recommended for all ordinary plumbing and steam fitting jobs. It's scientifically designed to reduce weight without sacrificing strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized 90 degree elbow is used to change direction in piping. It's suitable for use with water or steam. Flat banded, right hand threads.
|
The galvanized floor flanges are made from malleable iron for tensile strength. Its galvanized finish resists rust in water, air, and steam applications.
|
The galvanized floor flanges are made from malleable iron for tensile strength. Its galvanized finish resists rust in water, air, and steam applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
This galvanized tee is used to change direction in piping for use with water or steam. It meets ANSI standard with flat banded, right hand threads standard screw.
|
The galvanized cross is for use with residential drinking water applications. Its flat branded with right hand threads.
|
The galvanized cross is for use with residential drinking water applications. Its flat branded with right hand threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.
|
The galvanized floor flanges are made from malleable iron for tensile strength. Its galvanized finish resists rust in water, air, and steam applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized floor flanges are made from malleable iron for tensile strength. Its galvanized finish resists rust in water, air, and steam applications.
|
The galvanized union is for steam and water working pressure up to 150 lb. It has a brass to iron ball joint seat and the male end of seat is made with radius to insure ideal contact if piles are out of line. This is recommended for all ordinary plumbing and steam fitting jobs. It's scientifically designed to reduce weight without sacrificing strength.
|
The galvanized union is for steam and water working pressure up to 150 lb. It has a brass to iron ball joint seat and the male end of seat is made with radius to insure ideal contact if piles are out of line. This is recommended for all ordinary plumbing and steam fitting jobs. It's scientifically designed to reduce weight without sacrificing strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
The galvanized cross is for use with residential drinking water applications. Its flat branded with right hand threads.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads: ANSI B1.20.1.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Smith-Cooper Pipe Cap, Nominal Size: 3 in, Threaded Connection, 300 psi, Malleable Iron, 1.8 in L
|
The galvanized union is for steam and water working pressure up to 150 lb. It has a brass to iron ball joint seat and the male end of seat is made with radius to insure ideal contact if piles are out of line. This is recommended for all ordinary plumbing and steam fitting jobs. It's scientifically designed to reduce weight without sacrificing strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Smith-Cooper Pipe Cap, Nominal Size: 4 in, Threaded Connection, 300 psi, Malleable Iron, 2.08 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
|
|
|
|
|
|
|
|
|
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.
|
|