Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > AUTOMOTIVE ELECTRICAL > LAMP ASSEMBLYS
Sort By:
1
Victor V308 Lens Repair Tape Victor V309 Lens Repair Tape TAPE REDLENS REPAIR 1.875X60IN
Use on parking light, directional light and side marker light. 1-7/8 in x 5 ft, on a card. Use on parking light, directional light and side marker light. 1-7/8 in x 5 ft, on a card. 3M? red lens repair tape 03441 is designed for temporary repairs of broken or cracked taillights, parking lights and side directional lights. This flexible tape is suited for both flat, curved tail or signal lights.
Peterson V107WR Mini Clearance/Side Marker Light Peterson V107WA Mini Clearance/Side Marker Light Peterson V114 Stud Mount Clearance/Side Marker Light
Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers. Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers. Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick-Lock" port to connect. Single wire for electrical connection. Features 15,000 hr long life bulb.
Peterson V108 Clearance/Side Marker Light Peterson V108 Clearance/Side Marker Light Peterson V440-15 Square Replacement Lens
Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. Tough molded acrylic lens. Used to replace lenses of Peterson No 440, 441, 444 and 452 series lights. 4-1/2 in square.
Peterson V138A Double Bull Eye Clearance/Side Marker Light Peterson V135R Oblong Clearance/Side Marker Light Peterson V138R Double Bull Eye Clearance/Side Marker Light
Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded through mounting hardware. Single wire for electrical connection. 15,000 hrs long life bulbs. 4 in W x 2 in H x 1-1/8 in D. Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded through mounting hardware. Single wire for electrical connection. 15,000 hrs long life bulbs. 4 in W x 2 in H x 1-1/8 in D.
Peterson V135A Oblong Clearance/Side Marker Light Peterson V438 Utility License Plate Light Peterson V434 Mini Utility Surface Mount Courtesy Light
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers. For courtesy, interior or instrument lights, commonly used to illuminate license plate or step bumpers. Chrome-plated steel housing snaps into 1-1/4 in Dia holes. 1-1/2 in Dia overall. 2 required for legal license illumination. Mounts with two stainless steel screws on 2 in centers and has separate ground wire for non-metallic surfaces. Polished, chrome-plated brass housing with hooded shield to prevent upward glare. 2-9/16 in W x 1-3/16 in H x 1 in D.
Piranha V168R LED Slim Line Clearance/Side Marker Light Peterson V435 Surface Mount License Plate Light Peterson V440 Combination Tail Light
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA. Chrome-plated steel housing and mounting bracket in traditional styling for numerous applications. 1-7/8 in projection, 2-3/4 in W x 2 in H bracket mounts on 2 in centers. Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers.
Peterson V440L Combination Tail Light Peterson V428S Stud Mount Combination Tail Light Peterson V169KR LED Clearance/Side Marker Light Kit
Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers. Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10 in lead wires. Universal stud mount with 1/4 in studs on 2 in centers. 3-3/4 in H x 2-5/8 in D overall. Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D.
Peterson V169KA LED Clearance/Side Marker Light Kit Piranha V168XA LED Slim Line Clearance/Side Marker Light Kit Piranha V168XR LED Slim Line Clearance/Side Marker Light Kit
Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA.
LIGHT MARKER LED 6 DIODE AMBER LIGHT MARKER LED 6 DIODE RED  Peterson V391 Dome Interior Light
For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces. For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces. Features durable Lexan lens and nylon push-button On/Off switch for long life. Separate ground wire supplied for mounting on non-metallic surfaces. 4-9/16 in W x 1-3/4 in H x 1-3/4 in D, mounts on 3-1/2 in x 1-1/2 in centers.
Peterson V170 LED Clearance/Side Marker Light Peterson V153KR LED Clearance/Side Marker Light Kit Peterson V153KA LED Clearance/Side Marker Light Kit
Functions as clearance or side marker light. 2-wire, hard-wired design. Operates from 9 to 16 V. Ground wire includes number 10 ring terminal. Mount using center stud or two mounting screws. 3-1/8 in W x 2 in H x 15/16 in. Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug. Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug.
Peterson V428W Stud Mount Combination Tail Light Peterson V452 Submersible Combination Tail Light Peterson V313 Single Face Pedestal Mount Signal Light
PM Stop, Stud Mounting, Plastic Housing Material, Black Housing, 2-5/8 in Width, 3-3/4 in Height, Includes: (3) Stop, Turn and Tail Lights Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2 in centers and includes mounting hardware. Durable, black ABS housing with two snap-on amber lenses.
Peterson V452L Submersible Combination Tail Light Peterson V421 Oblong Sealed Combination Tail Light Kit Peterson V313 Double Face Pedestal Mount Combination Tail Light
Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2 in centers and includes mounting hardware. Lexan housing and lens sonic welded for a permanent seal. Legal in either vertical or horizontal mounting position for U.S. and ECE applications. Includes No.421R light, No.421-18 grommet and No.421-491 right angle, 3-wire plug with an added terminal for double filament bulb Interchangeable with all competitive units. 6-1/2 in W x 2-1/4 in H. Durable, black ABS housing with snap-on red acrylic lens.
LIGHT LICENSE PLATE AUTO LED  Peterson V107 Mini  Identification Light Bar Peterson V306 Surface Mount Combination Tail Light
Durable, low-draw LED design. Requires two lights to meet DOT license light requirements when mounted to side of license plate. Also suitable for utility courtesy light applications. Hardwired leads. Corrosion-resistant, zinc-plated, painted with white baked enamel. Three 3-1/4 in x 1 in x 1-1/8 in #107 compact lights attached to each bar. Lights have acrylic lenses that lock into base to protect against being knocked out. Mounts on 16-1/2 in centers and grounds through mounting hardware. 16-1/8 in W x 1 in H x 1-3/8 in D, 16-1/2 in L with mounting brackets. Features polycarbonate lens, galvanized steel base plate, dual-filament bulb and tough plastic guard to protect lead wires. 4-9/16 in W x 2-1/2 in H x 1-3/4 in D, mounts on 3-1/2 in x 1-1/2 in centers.
LIGHT STOP 6-1/2 OVAL LED     LIGHT MARKER LED 2-1/2 RND AMB LIGHT MARKER LED 2-1/2 RND RED
Red grommet mount kit. 9 to 16 V operating range. Skirted weld joint for added protection against moisture. Does not require top positioning to meet FMVSS 108 standards. Compatible with 431-491 connecting plug. Proudly made in the USA. Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9 to 16 V operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug. PM Piranha Clearance/Side Marker Light, 9 to 16 V, LED Lamp, Red Housing, 2-1/2 in Diameter, 0.9 in Width, Includes: (6) Clearance/Side Marker Lights
LIGHT MARKER LED 2IN RND AMB  Peterson V426 Sealed Combination Tail Light Kit LIGHT STOP 4-1/4" ROUND LED
PM Clearance/Side Marker Light Kit, 9 to 16 V, LED Lamp, Hard-Wired Mounting, Amber Housing, 2 in Diameter, 0.9 in Width, Includes: LED Light, 146-18 Mounting Grommet, 162-49 Plug Sealed, 4 in round stop, turn and taillight may be used on both curbside and roadside of vehicle or trailer. Fully automated manufacturing process ensures consistent quality and reliability. Features extra wide, spin-welded, tongue-and-groove lens lip and waterproof seal. High performance, copper alloy conductors eliminate the possibility of wire failure. State-of-the art bulb design features three supports for the minor filament and two supports for the major filament providing long bulb life. Wedge-base socket prevents premature bulb failure. Includes light, grommet and 431-491 straight plug. 4-1/4 in Dia. Industry standard PL3 socket integrated into housing. 9 to 16 V operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 deg position. Suitable for over-80 in vehicle width applications. 7-diodes, LED oval. Kit contains light, grommet and plug. Proudly made in the USA.
Peterson V413 Double Wire Flush Mount Combination Tail Light Peterson V507 Implement Flush Mount Tractor Light Peterson V502 Utility Halogen Low Profile Tractor Light
Sturdy plastic housing with a black finish. Brass socket and lexide lens gasket for long life. 5-1/2 in face Dia, 4-1/2 in Dia inset and 1-1/2 in D overall. Par-36 sealed beam cushioned by durable, molded, weatherproof housing from road shock and vibration, snaps in for fast, easy service. Universal 5/16 in stud and adjustable, zinc-plated bracket allow mounting in any position. 10 in lead wire exits through housing back. Uses No.4411 beam for trapezoid pattern. Low-profile lamp functions as tractor or utility light with bright 55 W, H3 replaceable bulb. Features high-impact polycarbonate housing and adjustable stainless steel mounting hardware.
Peterson V840 LED Submersible Combination Tail Light Piranha V423 LED Surface Mount Combination Tail Light Peterson V540 Trailer Light Kit
Solid state construction, no bulbs to break or burn out. 100,000 hrs rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion and vibration. Lower amp draw than incandescent lights. Designed to directly replace 440-Series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80 in wide. 4-1/2 in W x 4-1/2 in H x 2 in D. Kit with decorative snap-on chrome bezel included. Hard-wired design eliminates the need for separate plug and reduces connection points. Designed for horizontal installation. 9 to 16 V operating range. Meets FMVSS 108 requirements. Provides all legal lighting and reflective equipment for any trailer less than 80 in W. Combination lights, of tough molded housing and lenses with phosphor bronze contacts for durability, exceed DOT requirements for stop, turn, tail, rear and side reflector, side marker and license illuminator. Side marker light has built-in reflector optics. Includes No.440 stop and tail combination lights, 2 No.114A side marker lights, 20 ft wire harness, 48 in trunk connector, license bracket, all mounting hardware and installation instructions.
Peterson V856 LED Submersible Combination Tail Light Peterson V544 Submersible Rear Trailer Light Kit Peterson V840L LED Submersible Combination Tail Light
Solid state construction, no bulbs to break or burn out. 100,000 hrs rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion and vibration. Lower amp draw than incandescent lights. Designed to directly replace 456-Series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers 80 in wide and over. 7-15/16 in W x 2-7/8 in H x 2-7/8 in D. Tough molded housing and lenses with phosphor bronze contacts for durability. Belljar design, gasketed lenses prevent water from reaching bulbs and contacts. Use as a rear light for over 80 in wide applications. Exceeds DOT requirements for stop, turn, tail, rear and side reflector, side marker and rear clearance. Includes No.452 Belljar submersible lights, 25 ft trailer harness, 48 in trunk connector, plastic license bracket, all mounting hardware and installation instructions. Front side marker lights and reflectors needed to meet DOT requirements. Solid state construction, no bulbs to break or burn out. 100,000 hrs rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion and vibration. Lower amp draw than incandescent lights. Designed to directly replace 440-Series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80 in wide. 4-1/2 in W x 4-1/2 in H x 2 in D.
Peterson V555 Auxiliary Tow Light Kit Peterson V445 Stud Mount Combination Tail Light Peterson V773 Alternating Strobe Action Flashing Light
Two auxiliary warning lights with magnetic bases. Kit includes trunk harness, 20 ft four-wire harness, connectors and instructions. Plugs into standard flat four-way vehicle trailer light connector. Features three 1/4 in mounting studs on 2 in triangular pattern. Includes stop, turn, tail, back-up and license light functions. Will fit Peterbilt, Mack, White and Jeep. 6-1/4 in W x 6-3/4 in H x 2-3/4 in D overall. Provides alternating strobe-like action with 90 flashes per minute. Includes three powerful magnets on base for secure mounting and 12 ft coiled cord with cigarette lighter plug.
Channel Cat V547 Submersible Rear Trailer Light Kit Peterson V947 LED Submersible Rear Trailer Light Kit Peterson V941 LED Submersible Rear Trailer Light Kit
Provides rear lighting and reflectors for trailers. Lights feature easy maintenance and bulb replacement while maintaining gasket seal and grounding through a separate lead wire. Includes 2 low-profile, submersible combination taillights (1 with license light) that mount on slide-on 2 in centers, 25 ft trailer harness, 48 in trunk connector, license bracket, mounting hardware and installation instructions. Front sidemarker/clearance lights, side reflectors and rear identification lights are necessary to meet all DOT requirements. Submersible rear lighting kit and reflectors for all trailers 80 in wide and over. Includes 856/856L LED taillights plus license bracket, mounting hardware and installation instructions. 7-15/16 in W x 2-7/8 in H x 2-7/8 in D. Submersible LED rear lighting kit for trailers under 80 in wide. Solid state super bright LED diodes, 100,000 hrs rated life. Includes 840/840L LED taillights plus license bracket, mounting hardware and installation instructions.
   
 
1