|
|
|
|
|
|
|
|
|
|
|
|
|
|
HSS bits can be easily sharpened to a very fine edge for smooth, precise cuts. HSS bits work best with softwoods and light plastics. Single flute allows for faster feed rates.
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Single flute trim bit allows for a faster feed rate. Solid carbide gives best rigidity and long life.
|
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cut all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate.
|
The 41 Series Bits provide a range of bevels from 8 to 45 deg and feature a ball bearing guide.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Bits will work with many popular dovetailing jigs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. 14 degree angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Core box bit is used for cutting grooves in a variety of applications. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general-purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for use in CNC, hand-held and table-mounted routers.
|
Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general-purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for use in CNC, hand held and table-mounted routers.
|
Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general-purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for use in CNC, hand held and table-mounted routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Up cut spiral is used for upward chip evacuation and the best finish on the bottom side of workpiece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut.
|
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Beading bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Round nose bits add a beautiful engraved detail to cabinet doors, drawer fronts and fluted millwork and they are also a great choice for routing sign lettering. Sometimes called "Core Box" bits, these tools can be used in CNC, hand held or table-mounted routers to cut hardwood, softwood, plywood and composites.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a excellent finish.
|
Provides smooth, intricate dovetail joints. Compatible with many popular dovetailing jigs. Cuts all composition materials, plywood, hardwood and softwood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Micrograin bits designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Positive hook angles cut efficiently while specially designed tips provide fast plunge cutting. Strong webbing and heavy cutter backing extend bit life.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Designed to cut deep or shallow ``V" grooves. Bits are used for sign making or for adding decorative accents to furniture and plaques. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Creates key holes for hanging plaques and shelves. Large diameter bores holes to allow nail or screw heads to enter the slot while the smaller diameter allow room for the shank of the nail or screw. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held table mounted portable routers.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Freud mortising bits are designed to deliver clean, precise, splinter-free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware or cutting grooves and dadoes. These bits are designed with deep center gullets for maximum material removal without chip loading. Use in any CNC or portable router.
|
Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Triple flute trim bit gives an extra-smooth finish. The fully hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Freud mortising bits are designed to deliver clean, precise, splinter-free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware or cutting grooves and dadoes. These bits are designed with deep center gullets for maximum material removal without chip loading. Use in any CNC or portable router.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Rabbeting bit can be used for joining boards or for letting in back panels. The fully hardened and tempered steel shank provides ultimate durability.
|
Creates a uniform chamfer on the edge of any workpiece to add character, while retaining crisp geometric lines.
|
Creates a uniform chamfer on the edge of any workpiece to add character, while retaining crisp geometric lines.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 41 Series bits provide a range of bevels from 8 to 45 deg and feature a ball bearing guide.
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. No. 18-106: 3/16" large radius. No. 18-108: 1/4" large radius.
|
Chamfer size is easily adjusted by changing the height of the bit. Cut all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Versatile micro grain bits add attractive edging on new pieces and match many older molding cuts for remodeling work.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
|
Bits will produce an attractive bead profile to furniture and millwork. Special shear angle causes the bit to slice the wood for a clean cut every time. Cut composition materials, plywood, hard wood and soft woods. Use on hand held and table mounted portable routers. Nos. 36-110 and 36-112, 1/2'' small diameter. 3/8" bearing diameter.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use in top surface chip-free routing where chip removal is not a problem. Ideal for through cutting of material with a table-mounted router or a pin router. Reduces chipping when working with single-sided veneers or laminated materials. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers, pin routers, hand-held and table-mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to cut deep or shallow ``V" grooves. Bits are used for sign making or for adding decorative accents to furniture and plaques. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Create smooth, classic cove profiles with Freud cove bits, which have a shear angle that slices wood similar to the way a Craftsman uses a hand plane.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
Bits will produce an attractive bead profile to furniture and millwork. Special shear angle causes the bit to slice the wood for a clean cut every time. Cut composition materials, plywood, hard wood and soft woods. Use on handheld and table-mounted portable routers. No 36-110 and No 36-112, 1/2 in small diameter. 3/8 in Dia bearing.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
Ideal for following templates, routing sign lettering and other tasks where the pattern is placed on top of the work piece. The top mounted bearings on these bits make them ideal for almost any application where the work piece is being grooved or routed out. Use in handheld or table-mounted routers to rout hardwood, softwood, plywood or composites.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Cove and bead bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roman ogee bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Designed to cut deep or shallow ``V" grooves. Bits are used for sign making or for adding decorative accents to furniture and plaques. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwoods and softwoods. Use on handheld and table-mounted portable routers. Overall diameter 1-1/2 in. Overall length 2-1/2 in.
|
Designed to produce precision cuts in almost any trimming or pattern routing application with bearings above and below the cutting edge.
|
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roman ogee bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Create smooth, classic cove profiles with Freud cove bits, which have a shear angle that slices wood similar to the way a Craftsman uses a hand plane.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. V-groove bit is used for cutting grooves in a variety of applications. The fully hardened and tempered steel shank provides ultimate durability.
|
Ovolo bits create decorative grooves in moulding and furniture, including the attractive groove in French Provincial style doors and cabinets. Or use them with an edge guide or fence to create round over or beading edge profiles. Great for hard or soft wood using hand held, table-mounted or CNC routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Freud rounding over bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, "soften" sharp edges of parts and so many other tasks. Most of these bits also feature Freud's unique quadra-cut design for flawless finish in cross grain applications. To get more use from your bits, equip the bits with a bearing that is 1/8 in smaller in diameter to create a beading profile. Use them in CNC, handheld and table-mounted routers to cut hardwood, softwood, plywood and composites.
|
Bits have upward shear angle for more efficient and smoother cut. Shear angle makes the bit slice the wood similar to the way a craftsman uses a hand plane. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers.
|
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits will produce an attractive bead profile to furniture and millwork. Special shear angle causes the bit to slice the wood for a clean cut every time. Cut composition materials, plywood, hard wood and soft woods. Use on hand held and table mounted portable routers. Nos. 36-110 and 36-112, 1/2'' small diameter. 3/8" bearing diameter.
|
Freud offers a huge selection of decorative edge bits, most featuring our patented Quadra-Cut design for an extra fine finish. Choose the profile you need to add distinctive design to cabinets, furniture, plaques and millwork with these decorative edging bits. Ideal for routing hardwood, softwood, plywood or composites using handheld or table-mounted routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Downshear cutting angle produces a slicing action for chip-free, splinter-free cuts on the top surface of laminates and veneers.
|
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
Forms a single bead with a square shoulder. Commonly used to match moldings in historic homes. Cuts all composition materials, plywood, hardwood and soft wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
Bits will produce super cuts on both surfaces of the rabbet. Can be used in joining boards or for letting in back panels. Cuts all composition materials, plywood, hard wood and soft wood. Used on hand held and table mounted portable routers. 1/2" bearing, 3/8" rabbet
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
|
Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 3/8" bearing diameter.
|
Forms a single bead with a square shoulder. Commonly used to match moldings in historic homes. Cuts all composition materials, plywood, hardwood and soft wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to remove large amounts of wood, Freud's dish carving bits are excellent for making trays, coasters and raised letter signs. With specially ground tips to produce a smooth, flat surface, these bits are ideal for almost any grooving or surfacing task. Rout hardwood, softwood, plywood or composites using hand held or table-mounted routers.
|
Freud offers a huge selection of decorative edge bits, most featuring our patented quadra-cut design for an extra fine finish. Choose the profile you need to add distinctive design to cabinets, furniture, plaques and millwork with these decorative edging bits. Ideal for routing hardwood, softwood, plywood or composites using handheld or table-mounted routers.
|
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 3/8" bearing diameter.
|
Chamfer size is easily adjusted by changing the height of the bit. Cut all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Computer balancing of bits will insure a smooth vibration free cut. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing.
|
With interchangeable bearings to cut rabbets of different depths, these sets produce super-smooth cuts on both surfaces of the rabbet.
|
Adjustable, produces perfect fitting rail and stile doors from 5/8 to 1-1/4 in stock. Premier adjustable rail and stile router bit system, carbide tipped, anti-kickback router bits that are computer balanced, cuts all composition materials, plywood, hardwood and softwoods. Use on table mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mill tenons of any length. Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8 to 1-1/4 in thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32 to 1/4 in thick. High-density carbide composition and Perma-Shield? coating lengthen bit life and protect against heat and pitch build-up.
|
3-piece premier adjustable cabinet bit set. Designed to be used on 5/8 to 1-1/4 in stock. Includes attractive wooden storage box. Cuts all composition materials, plywood, hardwoods and softwoods. Use on table-mounted portable routers with 1/2 in shank.
|
|
|
